Commit Graph

4 Commits

Author SHA1 Message Date
Geert Uytterhoeven
f14cdf03d1
arm64: dts: mediatek: mt7986a: bpi-r3: Convert to sugar syntax
Overlay syntactic sugar for generating target-path fragments is
supported by the version of dtc supplied with the kernel since commit
50aafd6089 ("scripts/dtc: Update to upstream version
v1.4.6-21-g84e414b0b5bc").  Hence convert the Bananapi R3 overlay
devicetree source files to sugar syntax, improving readability.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2fd900a30b5a0f7de4ea68f60bac250794b8cdb4.1716984213.git.geert+renesas@glider.be
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-06-27 10:10:22 +02:00
Krzysztof Kozlowski
e630c7b0b6
arm64: dts: mediatek: replace underscores in node names
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240213144626.341463-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-02-14 10:18:44 +01:00
Daniel Golle
3bfbff9b46 arm64: dts: mt7986: increase bl2 partition on NAND of Bananapi R3
The bootrom burned into the MT7986 SoC will try multiple locations on
the SPI-NAND flash to load bl2 in case the bl2 image located at the the
previously attempted offset is corrupt.

Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
allowing for up to four redundant copies of bl2 (typically sized a
bit less than 0x40000).

Fixes: 8e01fb15b8 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-06-15 13:14:59 +02:00
Frank Wunderlich
8e01fb15b8 arm64: dts: mt7986: add Bananapi R3
Add support for Bananapi R3 SBC.

- SD/eMMC support (switching first 4 bits of data-bus with sw6/D)
- SPI-NAND/NOR support (switched CS by sw5/C)
- all rj45 ports and both SFP working (eth1/lan4)
- all USB-Ports + SIM-Slot tested
- i2c and all uarts tested
- wifi tested (with eeprom calibration data)

The device can boot from all 4 storage options. Both, SPI and MMC, can
be switched using hardware switches on the board, see
https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Jumper_setting

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20230106152845.88717-6-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-01-13 14:12:36 +01:00