Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':
Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.
Fixes: 9f88722216 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for the ADC on MT6357/8/9 and keep it default enabled
as this IP is always present on those PMICs.
Users may use different IIO channels depending on board-specific
routing.
Link: https://lore.kernel.org/r/20240604123008.327424-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Whether a regulator under the MT6358 PMIC is a fixed regulator or not is
derived from the node name. Compatible string properties are not used.
This causes validation errors after the regulator binding is converted
to DT schema.
Drop the bogus "regulator-fixed" compatible properties from the PMIC's
regulator sub-nodes.
Fixes: 9f88722216 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231130074032.913511-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The ldo_vcn33_bt and ldo_vcn33_wifi regulators are actually the same
regulator, having the same voltage setting and output pin. There are
simply two enable bits that are ORed together to enable the regulator.
Having two regulators representing the same output pin is misleading
from a design matching standpoint, and also error-prone in driver
implementations.
Now that the bindings have these two merged, merge them in the device
tree as well. Neither vcn33 regulators are referenced in upstream
device trees. As far as hardware designs go, none of the Chromebooks
using MT8183 w/ MT6358 use this output.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT6358 is a PMIC that is typically used on MT8183 boards, and it has
its own dtsi file, declaring interrupts-extended on its node.
The interrupt pin of that PMIC is connected to a SoC GPIO and that
is therefore not only SoC-specific, but board-specific: this means
that the interrupt-extended property does not belong to the PMIC
dtsi file, but to board files using that PMIC.
For correctness, transfer the interrupts-extended property from the
PMIC-specific mt6358.dtsi to board files.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
As already done for MT8173 and MT8183 devicetrees, change all instances
of interrupt-parent + interrupts to one line as interrupts-extended
where possible across all remaining device trees to both simplify and
reduce code size.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
- Change the node name from "mt6358" to "pmic", "mt6358rtc" to "rtc" and
"mt6358keys" to "keys" to be consistent with the generic names recommendation.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221005-mt6357-support-v8-4-560caaafee53@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Set pin control for the SoC sound node.
The compatibles are set by each model dts.
The codecs that each models use are:
burnet ts3a227_max98357
damu da7219_max98357
fennel da7219_rt1015p
fennel14 da7219_rt1015p
juniper ts3a227_max98357
kakadu da7219_rt1015p
kappa ts3a227_max98357
kenzo ts3a227_max98357
kodama ts3a227_max98357
krane ts3a227_max98357
willow-sku0 da7219_max98357
willow-sku1 ts3a227_max98357
Signed-off-by: Kansho Nishida <kansho@chromium.org>
Link: https://lore.kernel.org/r/20210706190111.v3.2.I6e9ce0f2a489f9a52299656cd966b38ae75e7552@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The regulators are expected to be instantiated with matching the
device-tree compatible, so add the proper compatible name under the
regulators node.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-3-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
