The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91f ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-3-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The device is available in multiple variants with differing RAM
capacities. The memory range defined in the 0x80000000 bank exceeds the
address range of the memory controller, which eventually leads to ARM
SError crashes. Reduce the bank size to a value which is available to
all devices.
The bootloader must be responsible for identifying the RAM capacity and
editing the memory node accordingly.
Fixes: d6f3a7f91f ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-2-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In gadget mode, USB connections are sluggish. The device won't send
packets to the host unless the host sends packets to the device. For
instance, SSH-ing through the USB network would apparently not work
unless you're flood-pinging the device's IP.
Add the property snps,usb2-gadget-lpm-disable to the dwc3 node, which
seems to solve this issue.
Fixes: d6f3a7f91f ("arm64: dts: exynos: add initial devicetree support for exynos7870")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250626-exynos7870-dts-fixes-v1-1-349987874d9a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
gs101 (Google Pixel 6 and Pixel 6 Pro) supports cold- and warm-reboot.
Cold-reset is useful because it is more secure, e.g. wiping all RAM
contents, while the warm-reboot allows RAM contents to be retained
across the reboot, e.g. to collect potential crash information.
Add the required DT changes to switch to the gs101-specific reboot
method, which knows how to issue either reset as requested by the OS.
The PMIC plays a role in this as well, so mark it as
'system-power-controller', which in this case ensures that the device
will wake up again after a cold-reboot, ensuring the full power-cycle
is successful.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-3-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On Pixel 6 (and Pro), a Samsung S2MPG10 is used as main PMIC, which
contains the following functional blocks:
* common / speedy interface
* regulators
* 3 clock outputs
* RTC
* power meters
* GPIO interfaces
This change enables the PMIC itself and the RTC. We're still working on
the remaining parts or waiting for bindings to be merged, hence only a
small subset of the functional is being enabled.
The regulators fall into the same category (still being finalised), but
since the binding requires a 'regulators' node, an empty node is being
added to avoid validation errors at this stage.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-2-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ufs-exynos driver configures the sysreg shareability as
cacheable for gs101 so we need to set the dma-coherent
property so the descriptors are also allocated cacheable.
This fixes the UFS stability issues we have seen with
the upstream UFS driver on gs101.
Fixes: 4c65d7054b ("arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes")
Cc: stable@vger.kernel.org
Suggested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250314-ufs-dma-coherent-v1-1-bdf9f9be2919@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On gs101, the boot mode is stored both in a syscon register, and in
nvmem.
Add the dm-verity-device-corrupted reboot mode to the syscon-reboot-
based boot mode as well, as both (nvmem & syscon) modes should be in
sync.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-4-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the 'nvmem-reboot-mode' which is used to communicate a requested
boot mode to the boot loader.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-3-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On Pixel 6 (and Pro), a MAX77759 companion PMIC for USB Type-C
applications is used, which contains four functional blocks (at
distinct I2C addresses):
* top (including GPIO & NVMEM)
* charger
* fuel gauge
* TCPCi
This change adds the PMIC and the subnodes for the GPIO expander and
NVMEM, and defines the NVMEM layout.
The NVMEM layout is declared such that it matches downstream's
open-coded configuration [1].
Note:
The pinctrl nodes are kept sorted by the 'samsung,pins' property rather
than node name, as I think that makes it easier to look at and to add
new nodes unambiguously in the future. Its label is prefixed with 'if'
(for interface), because there are three PMICs in total in use on
Pixel 6 (Pro).
Link: https://android.googlesource.com/kernel/google-modules/bms/+/96e729a83817/max77759_maxq.c#67 [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250524-b4-max77759-mfd-dts-v2-2-b479542eb97d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
New dtschema v2025.6 enforces different naming on I2C nodes thus new
dtbs_check warnings appeared for I2C GPIO nodes:
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
$nodename:0: 'i2c-gpio-0' does not match '^i2c(@.+|-[a-z0-9]+)?$'
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'amplifier@31' were unexpected)
Rename the nodes to a generic i2c-[0-9]+ style with numbers continuing
the SoC I2C controller indexing (3 controllers) for simplicity and
obviousness, even if the SoC I2C controller is not enabled on given
board. The names anyway would not conflict with SoC ones because of
unit addresses.
Verified with comparing two fdt (after fdtdump).
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Closes: https://lore.kernel.org/all/aCtD7BH5N_uPGkq7@shikoro/
Link: https://lore.kernel.org/r/20250612095549.77954-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In preparation for switching to the architected timer as the primary
clockevents device, mark the cpuidle nodes with the 'local-timer-stop'
property to indicate that an alternative clockevents device must be
used for waking up from the "c2" idle state.
Signed-off-by: Will Deacon <willdeacon@google.com>
[Original commit from a896fd9863]
Signed-off-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Youngmin Nam <youngmin.nam@samsung.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Fixes: ea89fdf24f ("arm64: dts: exynos: google: Add initial Google gs101 SoC support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250611-gs101-cpuidle-v2-1-4fa811ec404d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Universal Serial Interface (USI) supports three serial protocol
like uart, i2c and spi. ExynosAutov920 has 18 instances of USI.
Add spi nodes for all the instances.
Signed-off-by: Faraz Ata <faraz.ata@samsung.com>
Link: https://lore.kernel.org/r/20250613062208.978641-1-faraz.ata@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add required dt node for CMU_HSI2 block, which
provides clocks to ufs and ethernet IPs
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250529112640.1646740-5-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Galaxy S22+ (SM-S906B), codenamed g0s, is a mobile phone from
2022. It features 8GB RAM, 128/256GB UFS 3.1, Exynos 2200 SoC and a
1080x2340 Dynamic AMOLED display.
This device has an issue where cpu2 and cpu3 fail to come up
consistently, which leads to a hang later in the boot process. Disable
them until the problem is figured out.
This initial device tree configures simple-framebuffer, volume-up key and
usb.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504145907.1728721-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos 2200 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy S22
(r0s), S22+ (g0s), S22 Ultra (b0s) Add minimal support for that SoC,
including psci, pmu, chipid, architecture timer and mct, pinctrl,
clocks and usb.
The devices using this SoC suffer from an issue caused by the stock
Samsung bootloader, as it doesn't configure CNTFRQ_EL0. Hence it's
needed to hardcode the adequate frequency in the timer node,
otherwise the kernel panics.
Further platform support will be added over time.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504145907.1728721-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add syscon node for the PMU Interrupt Generation registers.
Additionally update the exynos-pmu node to provide a phandle
to pmu-intr-gen syscon.
These registers are required for CPU hotplug to be functional.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-4-9f64a2657316@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add initial devicetree support for Samsung Galaxy J7 Prime
(codename: on7xelte), an Exynos7870 device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-3-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos7870 is an arm64 SoC manufactured by Samsung and announced in
2016. It is present in multiple mid-range Samsung phones and tablets.
Add basic devicetree support for the SoC, which includes CMUs, pin
controllers, I2C, UART, DW-MMC, and USB-DRD.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-2-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add cmu_cpucl1/2(CPU Cluster 1 and CPU Cluster 2) clocks
for switch, cluster domains respectively.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-5-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Universal Serial Interface (USI) supports three serial protocol
like uart, i2c and spi. ExynosAutov920 has 18 instances of USI.
Add all the USI DT node and subsequent uart nodes for all the instances.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Faraz Ata <faraz.ata@samsung.com>
Link: https://lore.kernel.org/r/20250417113511.759268-1-faraz.ata@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Update all samsung,mode property values to account for renaming USI_V2
constants to USI_MODE in the bindings.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250209132043.3906127-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250219085726.70824-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add UFS Phy for ExynosAutov920
Like ExynosAutov9, this also uses fixed-rate clock nodes until clock driver
has been supported. The clock nodes are initialized on bootloader stage
thus we don't need to control them so far.
Changes from v4:
- Place entry in correct order instead of appending to the end.
Signed-off-by: Sowon Na <sowon.na@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250219073731.853120-1-sowon.na@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add CPU caches information to its dt nodes so that the same is
available to userspace via sysfs. This SoC has 64/64 KB I/D cache and
256KB of L2 cache for each core, 2 MB of shared L3 cache for each quad
cpu cluster and 1 MB of shared L3 cache for the dual cpu cluster.
Signed-off-by: Devang Tailor <dev.tailor@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250108055012.1938530-1-dev.tailor@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the ACPM protocol node. ACPM protocol provides interface for all
the client drivers making use of the features offered by the
Active Power Management (APM) module.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250207-gs101-acpm-dt-v4-3-230ba8663a2d@linaro.org
[krzysztof: correct alphabetical node placement]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
GS101 has 14 mailbox controllers. Add the AP to APM mailbox node.
Mailbox controllers have a shared register that can be used for passing
the mailbox messages. The AP to APM mailbox controller is used just as a
doorbell mechanism. It raises interrupt to the firmware after the mailbox
message has been written to SRAM where the TX/RX rings are defined.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250207-gs101-acpm-dt-v4-2-230ba8663a2d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SRAM is used by the ACPM protocol to retrieve the ACPM channels
information, which includes the TX/RX rings among other channel
configuration data. Add the SRAM node.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250207-gs101-acpm-dt-v4-1-230ba8663a2d@linaro.org
[krzysztof: correct alphabetical node placement]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
syscon-reboot-mode can be used to indicate the reboot mode for the
bootloader.
While not sufficient for all boot modes, the boot loader does use
SYSIP_DAT0 (PMU + 0x0810) to determine some of the actions it should
take. This change helps it deciding what to do in those cases.
For complete support, we'll also have to write the boot mode to an
NVMEM storage location, but we have no upstream driver for that yet.
Nevertheless, this patch is a step towards full support for the boot
mode.
Note1: Android also uses 'shutdown,thermal' and
shutdown,thermal,battery', but that can not be described in DT as ','
is used to denote vendor prefixes. I've left them out from here for
that reason.
Note2: downstream / bootloader recognizes one more mode: 'dm-verity
device corrupted' with value 0x50, but we can not describe that in DT
using a property name due to the space, so it's been left out from here
as well. This string appears to come from drivers/md/dm-verity-target.c
and should probably be changed there in a follow-up patch, so that it
can be used in reboot-mode nodes like this one here.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250210-gs101-renppt-dts-v2-3-fb33fda6fc4b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
For power off, downstream only clears bit 8 and leaves all other bits
untouched, whereas this here ends up setting bit 8 and clearing all
others, due to how sysconf-poweroff parses the DT.
I noticed this discrepancy while debugging some reboot related
differences between up- and downstream and it's useful to align the
behaviour here.
Note: for reboot downstream seems to be incorrectly writing 0x00000002
and not just setting bit 1 (which is the only R/W bit in this
register), so we keep that one as-is here.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250210-gs101-renppt-dts-v2-2-fb33fda6fc4b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The regmap property for syscon-poweroff and syscon-reboot is unneeded
here because the poweroff and reboot nodes are children of syscon
already. It also is deprecated.
We can just drop it to simplify the DT.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250210-gs101-renppt-dts-v2-1-fb33fda6fc4b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Nodes should be sorted by name but it is also nice to have same class of
devices together, so rename both PMU nodes (A53 and M2) to use "pmu"
prefix, instead of suffix.
Link: https://lore.kernel.org/r/20241222145257.31451-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The Samsung Galaxy S8 uses a Samsung s6sy761 touchscreen over hsi2c23.
Add a node for it in order to allow using the touchscreen as long as
the previous bootloader has enabled the required regulators because
there's no support for PMIC yet.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250105161344.420749-7-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enable MMC for the Samsung Galaxy S8, used as external microSD card
storage. Since the main PMIC is currently not supported, assume the
required regulators are enabled by the previous bootloader.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250105161344.420749-6-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add an MMC node in order to allow devices with that SoC to make use of
it. It's typically used as a secondary storage option for SD cards. In
the vendor kernels, it's labelled as mmc_2, but since there don't seem to
be any other blocks, treat it as the only MMC.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250105161344.420749-5-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Universal Serial Interface (USI) supports three types of serial
interface such as UART, SPI and I2C. USIv1 can be configured to enable
either one or two of these protocols simultaneously in select combinations.
Define all the USI nodes from the PERIC blocks (USI0-13), in all their
possible configurations.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250105161344.420749-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These nodes were sorted by name, but it's nice to have the same class of
devices together. As such, drop the pmu suffix and add "pmu" as a prefix.
This keeps consistency between other Exynos SoCs too.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20250105-pmu-sorting-v1-1-b55519eaff2e@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_PERIS is a new clock controller that clocks the MCT. The MCT has 9
timers (1x count-up global timer, 8x count-down CPU local).
The global timer generates 4 interrupts, and each local timer
generates one interrupt. So, in total 12 interrupts.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20250104-cmu-nodes-v1-2-ae8af253bc25@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Raven is Google's code name for Pixel 6 Pro. Similar to Pixel 6
(Oriole), this is also based around its Tensor gs101 SoC.
For now, the relevant difference here is the display resolution:
1440 x 3120 instead of 1080 x 2400.
Create a new board file to reflect this difference.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-4-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In order to support Pixel 6 (Oriole), Pixel 6 Pro (Raven), Pixel 6a
(Bluejay), and all other versions correctly, we have to be able to
distinguish them properly as we add support for more features.
For example, Raven has a larger display. There are other differences,
like battery design capacity, etc.
Move all the parts that are common for now into a
gs101-pixel-common.dtsi, and just leave the display related things in
gs101-oriole.dts.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-3-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The bootloader configures the display hardware for a framebuffer at the
given address, let's add a simple-framebuffer node here until we get a
proper DRM driver.
This has several benefits since it's an OLED display:
* energy consumption goes down significantly, as it changes from white
(as left by bootloader) to black (linux console), and we generally
don't run out of battery anymore when plugged into a USB port
* less of a burn-in effect I assume
* phone stays cooler due to reduced energy consumption by display
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-2-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
When the serial console is enabled, we need to disable power delivery
since serial uses the SBU1/2 pins and appears to confuse the TCPCI,
resulting in endless interrupts.
For now, change the DT such that the serial console continues working.
Note1: We can not have both typec-power-opmode and
new-source-frs-typec-current active at the same time, as otherwise DT
binding checks complain.
Note2: When using a downstream DT, the Pixel boot-loader will modify
the DT accordingly before boot, but for this upstream DT it doesn't
know where to find the TCPCI node. The intention is for this commit to
be reverted once an updated Pixel boot-loader becomes available.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20241203-gs101-phy-lanes-orientation-dts-v2-5-1412783a6b01@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On Pixel 6 (and Pro), a max77759 companion PMIC for USB Type-C
applications is used, which contains four functional blocks (at
distinct I2C addresses):
* top (including GPIO)
* charger
* fuel gauge
* TCPCi
While in the same package, TCPCi and Fuel Gauge have separate I2C
addresses, interrupt lines and interrupt status registers and can be
treated independently.
The TCPCi is required to detect and handle connector orientation in
Pixel's USB PHY driver, and to configure the USB controller's role
(host vs device).
This change adds the TCPCi part as it can be independent and doesn't
need a top-level MFD.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241203-gs101-phy-lanes-orientation-dts-v2-4-1412783a6b01@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Galaxy S9 (SM-G960F), codenamed starlte, is a mobile phone
released in 2017. It has 4GB of RAM, 64GB of UFS storage, Exynos9810
SoC and 1440x2960 Super AMOLED display.
This initial device tree enables the framebuffer pre-initialised
by bootloader and physical buttons of the device, with more support
to come in the future.
Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241214-exynos9810-v4-2-4e91fbbc2133@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
