This UART is connected to the debug port of the WLAN module. It is
mostly useless, but makes for a good test case for runtime-pm without
having to unbind the console from the main system UART.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds the two PMGR nodes and all known power state subnodes. Since
there are a large number of them, let's put them in a separate file to
include.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two additional cd321x controllers.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Apple M1 has at least 5 i2c controllers. i2c0, i2c1 and i2c3 are used
on all M1 Mac devices. The 2020 Mac Mini uses i2c2 and the 13-inch
MacBook Pro uses i2c2 and i2c4.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds support for following Apple M1 devices:
- MacBook Pro (13-inch, M1, 2020)
- MacBook Air (M1, 2020)
- iMac (24-inch 2021)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Required for devices trying to use pinctrl devices as interrupt
controller.
Fixes: 0a8282b831 ("arm64: apple: Add pinctrl nodes")
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes make dtbs_check errors for t8103-j274.dts due to missing pci
properties.
Fixes: e1bebf9781 ("arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address")
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
At the moment, all the Minis running Linux have the same MAC
address (00:10:18:00:00:00), which is a bit annoying.
Expose the PCI node corresponding to the Ethernet device, and
declare a 'local-mac-address' property. The bootloader will update
it (m1n1 already has the required feature). And if it doesn't, then
the default value is already present in the DT.
This relies on forcing the bus number for each port so that the
endpoints connected to them are correctly numbered (and keeps dtc
quiet).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add the interrupt-map properties that are required for INTx
signalling.
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka
DARTs). Add the three instances that deal with the internal PCIe
ports and route each port's traffic through its DART.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add node corresponding to the apcie,t8103 node in the
Apple device tree for the Mac mini (M1, 2020).
Power domain references and DART (IOMMU) references are left out
at the moment and will be added once the appropriate bindings have
been settled upon.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921183420.436-5-kettenis@openbsd.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Add pinctrl nodes corresponding to the gpio,t8101 nodes in the
Apple device tree for the Mac mini (M1, 2020).
Clock references are left out at the moment and will be added once
the appropriate bindings have been settled upon.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210520171310.772-3-mark.kettenis@xs4all.nl
Signed-off-by: Hector Martin <marcan@marcan.st>
This currently supports:
* SMP (via spin-tables)
* AIC IRQs
* Serial (with earlycon)
* Framebuffer
A number of properties are dynamic, and based on system firmware
decisions that vary from version to version. These are expected
to be filled in by the loader.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
