Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-02 08:32:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,382,414 Commits 7 Branches 779 Tags 4.4 GiB
loongarch-next
Commit Graph

8 Commits

Author SHA1 Message Date
Andre Przywara
224e986158 arm64: dts: allwinner: h616: enable Mali GPU for all boards 
All Allwinner H616/H618 SoCs contain a Mali G31 MP2 GPU.

Enable the DT nodes for that GPU, and specify the regulator providing
power to the VDD_GPU pins of the package. The rest of the DT node is set
by the SoC, so is not board specific.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250416224839.9840-5-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
 2025-04-28 11:34:34 +08:00
Kryštof Černý
aee2eca83f arm64: dts: allwinner: Add disable-wp for boards with micro SD card 
Adding disable-wp property for micro SD nodes of Allwinner arm64 devices.
Boards were verified from online pictures/tables
that they have micro SD slots.

Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20240919-b4-nanopineoplus2-fix-mmc0-wp-v2-1-c708a9abc9eb@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
 2024-10-26 00:12:35 +08:00
Ryan Walklin
86a8f1aef9 arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards 
Now that the H616 (and variants) audio codec is supported, enable it for
boards with a mainline DTS. The Tanix TX1, Transpeed 8K618-T and X-96
Mate have all been tested with the onboard 3.5mm audio jack and the
Orange Pi Zero 3 with a 3.5mm jack connected to the audio header.

The RG35XX (2024, -H, -Plus and -SP variants) are also tested working
but have a separate mux and GPIO-controlled (PI5) power amplifier to
support both a headphone jack and onboard speakers.

The headphone jack has a GPIO for jack detection, but this is not
currently supported by the driver, so audio is heard both via the
headphone jack and speakers when the speaker amp is powered (by the
CLDO1 regulator, defined as always-on until proper jack detection is
implemented).

Define the audio codec and routing for all supported H616 and variant
boards, and power and speaker amp enablement where present on boards and
known.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-8-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
 2024-10-25 23:21:51 +08:00
Linus Torvalds
0c181b1d97 Power management updates for 6.10-rc1 
- Rework the handling of disabled turbo in the intel_pstate driver and
    make it update the maximum CPU frequency consistently regardless of
    the reason on top of a number of cleanups (Rafael Wysocki).
 
  - Add missing checks for NULL .exit() cpufreq driver callback to the
    cpufreq core (Viresh Kumar).
 
  - Prevent pulicy->max from going above the frequency QoS maximum value
    when cpufreq_frequency_table_verify() is used (Xuewen Yan).
 
  - Prevent a negative CPU number or frequency value from being printed
    if they are really large (Joshua Yeong).
 
  - Update MAINTAINERS entry for amd-pstate to add two new submaintainers
    and a designated reviewer (Huang Rui).
 
  - Clean up the amd-pstate driver and update its documentation (Gautham
    Shenoy).
 
  - Fix the highest frequency issue in the amd-pstate driver which limits
    performance (Perry Yuan).
 
  - Enable CPPC v2 for certain processors in the family 17H, as requested
    by TR40 processor users who expect improved performance and lower
    system temperature (Perry Yuan).
 
  - Change latency and delay values to be read from platform firmware
    firstly for more accurate timing (Perry Yuan).
 
  - A new quirk is introduced for supporting amd-pstate on legacy
    processors which either lack CPPC capability, or only only have CPPC
    v2 capability (Perry Yuan).
 
  - Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
    general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
    Dan Carpenter, Viresh Kumar).
 
  - CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
    Mishin).
 
  - Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
    Shivani Gupta).
 
  - brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
 
  - mediatek cpufreq: Add support for MT7988A (Sam Shih).
 
  - cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
 
  - Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
    driver (Jeff Johnson).
 
  - Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
 
  - Convert the cpuidle kirkwood driver to platform remove callback
    returning void (Yangtao Li).
 
  - Replace deprecated strncpy() with strscpy() in the hibernation core
    code (Justin Stitt).
 
  - Use %ps to simplify debug output in the core system-wide suspend and
    resume code (Len Brown).
 
  - Remove unnecessary else from device_init_wakeup() and make
    device_wakeup_disable() return void (Dhruva Gole).
 
  - Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
 
  - Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
    Rui).
 
  - Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
 
  - Make the Samsung exynos-asv driver update the Energy Model after
    adjusting voltage on top of some preliminary changes of the OPP and
    Enery Model generic code (Lukasz Luba).
 
  - Remove a reference to a function that has been dropped from the power
    management documentation (Bjorn Helgaas).
 
  - Convert the platfrom remove callback to .remove_new for the
    exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
    rk3399_dmc devfreq drivers (Uwe Kleine-König).
 
  - Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmZCZrASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxH3cP/RwYN6V3H+XUlhxN0M1GXb8zkLGTLm9X
 mGRKzDAoElGwYJVSpGPPtP0F+IaS3Sb7JnB719lSS7u7LmYIcqivTaBRdDIHWILJ
 qWbTSy7+84Zakf0RZ5qRr3GIGcNHmY5QDZf3/jC0AX4VBnFqFCjpaW04zmUjmAqn
 k13V3vfHl0J2/qKkm/JIvg2hubcAQzcP9UMgsjRE/S9QzNScEe7910v+0pv8XyUW
 4kdjSItUG8CaJV5er/XarYl4bh39OqT8Lvuo4wbaCFvOyRsMHoXqStxZVLTb9iEI
 j96vBXdy5Bfs503vc+Bu3TGcKPQTfjeRkEYDlwvpxwtJfMGnRQemgidSQwsbz208
 oQaybFxU0UHMgsVh1R0VrbdrhUuMxUz1OrCPSg6rhYJTZ1UhTwISoDTdf+SstGCC
 ODZgG59m6ez5udFAeavLA319jQEGL/oWPkHckVld4Gr10qrMu7SWseflx/+RY2dG
 Rjvd/Kv9FYWVyrIttQf3YIFlc3SLhM5K4IxPhzvj94MDs4spbwAx3wk5lR1Nw2ct
 HIVVjfBS+9I5dlRI7+VLM7VzD1JUxOOeZH84aTMDL080hiFZLEJaD+TkCc2QCa02
 5fGSa1DM5wX87TCdltRtW+OP715Q+97OXdeRQtwgIewfM8zPi0m2ctODNj08+EO1
 qmlFSJYTmFhR
 =el5Y
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These are mostly cpufreq updates, including a significant intel-pstate
  driver update and several amd-pstate improvements plus some updates of
  ARM cpufreq drivers, general fixes and cleanups.

  Also included are changes related to system sleep, power capping
  updates adding support for a new platform and a new hardware feature
  (among other things), a Samsung exynos-asv driver update allowing it
  to change its Energy Model after adjusting voltage, minor cpuidle and
  devfreq updates and a small documentation cleanup.

  Specifics:

   - Rework the handling of disabled turbo in the intel_pstate driver
     and make it update the maximum CPU frequency consistently
     regardless of the reason on top of a number of cleanups (Rafael
     Wysocki)

   - Add missing checks for NULL .exit() cpufreq driver callback to the
     cpufreq core (Viresh Kumar)

   - Prevent pulicy->max from going above the frequency QoS maximum
     value when cpufreq_frequency_table_verify() is used (Xuewen Yan)

   - Prevent a negative CPU number or frequency value from being printed
     if they are really large (Joshua Yeong)

   - Update MAINTAINERS entry for amd-pstate to add two new
     submaintainers and a designated reviewer (Huang Rui)

   - Clean up the amd-pstate driver and update its documentation
     (Gautham Shenoy)

   - Fix the highest frequency issue in the amd-pstate driver which
     limits performance (Perry Yuan)

   - Enable CPPC v2 for certain processors in the family 17H, as
     requested by TR40 processor users who expect improved performance
     and lower system temperature (Perry Yuan)

   - Change latency and delay values to be read from platform firmware
     firstly for more accurate timing (Perry Yuan)

   - A new quirk is introduced for supporting amd-pstate on legacy
     processors which either lack CPPC capability, or only only have
     CPPC v2 capability (Perry Yuan)

   - Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
     general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
     Dan Carpenter, Viresh Kumar)

   - CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
     Mishin)

   - Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
     Shivani Gupta)

   - brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)

   - mediatek cpufreq: Add support for MT7988A (Sam Shih)

   - cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
     Fan)

   - Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
     cpufreq driver (Jeff Johnson)

   - Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)

   - Convert the cpuidle kirkwood driver to platform remove callback
     returning void (Yangtao Li)

   - Replace deprecated strncpy() with strscpy() in the hibernation core
     code (Justin Stitt)

   - Use %ps to simplify debug output in the core system-wide suspend
     and resume code (Len Brown)

   - Remove unnecessary else from device_init_wakeup() and make
     device_wakeup_disable() return void (Dhruva Gole)

   - Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)

   - Add support for ArrowLake-H platform to the Intel RAPL driver
     (Zhang Rui)

   - Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)

   - Make the Samsung exynos-asv driver update the Energy Model after
     adjusting voltage on top of some preliminary changes of the OPP and
     Enery Model generic code (Lukasz Luba)

   - Remove a reference to a function that has been dropped from the
     power management documentation (Bjorn Helgaas)

   - Convert the platfrom remove callback to .remove_new for the
     exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
     rk3399_dmc devfreq drivers (Uwe Kleine-König)

   - Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"

* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
  PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
  PM / devfreq: mtk-cci: Convert to platform remove callback returning void
  PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
  PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
  cpufreq: amd-pstate: fix the highest frequency issue which limits performance
  cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
  cpuidle: ladder: fix ladder_do_selection() kernel-doc
  powercap: intel_rapl_tpmi: Enable PMU support
  powercap: intel_rapl: Introduce APIs for PMU support
  PM: hibernate: replace deprecated strncpy() with strscpy()
  cpufreq: Fix up printing large CPU numbers and frequency values
  MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
  cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
  cpufreq: amd-pstate: fix code format problems
  cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
  cppc_acpi: print error message if CPPC is unsupported
  cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
  cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
  ...
 2024-05-14 13:19:15 -07:00
Andre Przywara
09d0aaa0ae arm64: dts: allwinner: h616: enable DVFS for all boards 
With the DT bindings now describing the format of the CPU OPP tables, we
can include the OPP table in each board's .dts file, and specify the CPU
power supply.
This allows to enable DVFS, and get up to 50% of performance benefit in
the highest OPP, or up to 60% power savings in the lowest OPP, compared
to the fixed 1GHz @ 1.0V OPP we are running in by default at the moment.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
 2024-04-19 12:34:28 +05:30
Krzysztof Kozlowski
5dfdedf0de arm64: dts: allwinner: drop underscore in node names 
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.  Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec.  All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change.  Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
 2024-04-15 23:09:55 +02:00
Andre Przywara
eff68845b7 arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes 
In contrast to other devices using Allwinner SoCs, the Transpeed 8K618-T
TV box uses a mainline supported WiFi chip: it's Broadcom 4335 compatible,
packaged by Murata.

Add the required DT nodes to let DT users know about the SDIO device.
There is an otherwise empty MMC device node, to receive the MAC address,
that firmware might want to write in there.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209115759.3582869-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
 2024-02-23 21:04:01 +01:00
Andre Przywara
557e5347ba arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box 
This is a Chinese TV box, probably very similar if not identical to
various other cheap TV boxes with the same specs:
      - Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache)
      - 2 or 4GiB DDR3L DRAM
      - 32, 64, or 128 GiB eMMC flash
      - AXP313a PMIC
      - 100 Mbit/s Ethernet (using yet unsupported internal PHY)
      - HDMI port
      - 2 * USB 2.0 ports
      - microSD card slot
      - 3.5mm A/V port
      - 7-segment display
      - 5V barrel plug power supply

The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. UART1 is used for the Bluetooth chip,
although this isn't working yet.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
 2023-12-14 19:53:04 +01:00