All Allwinner H616/H618 SoCs contain a Mali G31 MP2 GPU.
Enable the DT nodes for that GPU, and specify the regulator providing
power to the VDD_GPU pins of the package. The rest of the DT node is set
by the SoC, so is not board specific.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250416224839.9840-5-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
With the DT bindings now describing the format of the CPU OPP tables, we
can include the OPP table in each board's .dts file, and specify the CPU
power supply.
This allows to enable DVFS, and get up to 50% of performance benefit in
the highest OPP, or up to 60% power savings in the lowest OPP, compared
to the fixed 1GHz @ 1.0V OPP we are running in by default at the moment.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The current emac setting is not suitable for Orange Pi Zero 3,
move it back to Orange Pi Zero 2 DT. Also update phy mode and
delay values for emac on Orange Pi Zero 3.
With these changes, Ethernet now looks stable.
Fixes: 322bf10320 ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some
DT nodes with the Zero 2, but comes with a different PMIC.
Move the common parts (except the PMIC) into a new shared file, and
include that from the existing board .dts file.
No functional change, the generated DTB is the same, except for some
phandle numbering differences.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The OrangePi Zero 2 has one USB-A host port, VBUS is provided by
a GPIO controlled regulator.
The USB-C port is meant to power the board, but is also connected to
the USB 0 port, which we configure as an MUSB peripheral.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The OrangePi Zero 2 is a development board with the new H616 SoC. It
comes with the following features:
- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 512MiB/1GiB DDR3 DRAM
- AXP305 PMIC
- Raspberry-Pi-1 compatible GPIO header
- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports
- 1 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- on-board 2MiB bootable SPI NOR flash
- 1Gbps Ethernet port (via RTL8211F PHY)
- micro-HDMI port
- (yet) unsupported Allwinner WiFi/BT chip
Add the devicetree file describing the currently supported features.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com
