All Allwinner H616/H618 SoCs contain a Mali G31 MP2 GPU.
Enable the DT nodes for that GPU, and specify the regulator providing
power to the VDD_GPU pins of the package. The rest of the DT node is set
by the SoC, so is not board specific.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250416224839.9840-5-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Adding disable-wp property for micro SD nodes of Allwinner arm64 devices.
Boards were verified from online pictures/tables
that they have micro SD slots.
Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20240919-b4-nanopineoplus2-fix-mmc0-wp-v2-1-c708a9abc9eb@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Now that the H616 (and variants) audio codec is supported, enable it for
boards with a mainline DTS. The Tanix TX1, Transpeed 8K618-T and X-96
Mate have all been tested with the onboard 3.5mm audio jack and the
Orange Pi Zero 3 with a 3.5mm jack connected to the audio header.
The RG35XX (2024, -H, -Plus and -SP variants) are also tested working
but have a separate mux and GPIO-controlled (PI5) power amplifier to
support both a headphone jack and onboard speakers.
The headphone jack has a GPIO for jack detection, but this is not
currently supported by the driver, so audio is heard both via the
headphone jack and speakers when the speaker amp is powered (by the
CLDO1 regulator, defined as always-on until proper jack detection is
implemented).
Define the audio codec and routing for all supported H616 and variant
boards, and power and speaker amp enablement where present on boards and
known.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-8-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The current emac setting is not suitable for Orange Pi Zero 3,
move it back to Orange Pi Zero 2 DT. Also update phy mode and
delay values for emac on Orange Pi Zero 3.
With these changes, Ethernet now looks stable.
Fixes: 322bf10320 ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some
DT nodes with the Zero 2, but comes with a different PMIC.
Move the common parts (except the PMIC) into a new shared file, and
include that from the existing board .dts file.
No functional change, the generated DTB is the same, except for some
phandle numbering differences.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
