Commit Graph

15 Commits

Author SHA1 Message Date
Linus Torvalds
f7857bf374 ARM: devicetree changes for 5.13
There are six new SoCs added this time. Apple M1 and Nuvoton WPCM450
 have separate branches because they are new SoC families that require
 changes outside of device tree files. The other four are variations of
 already supported chips and get merged through this branch:
 
  - STMicroelectronics STM32H750 is one of many variants of STM32
    microcontrollers based on the Cortex-M7 core. This is particularly
    notable since we rarely add support for new MMU-less chips
    these days. In this case, the board that gets added along with
    the platform is not a SoC reference platform but the "Art Pi"
    (https://art-pi.gitee.io/website/) machine that was originally design
    for the RT-Thread RTOS.
 
  - NXP i.MX8QuadMax is a variant of the growing i.MX8 embedded/industrial
    SoC family, using two Cortex-A72 and four Cortex-A53 cores. It
    gets added along with its reference board, the "NXP i.MX8QuadMax
    Multisensory Enablement Kit".
 
  - Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon 7c)
    that is used in some Chromebooks and Windows laptops. Only a reference
    board is added for the moment.
 
  - TI AM64x Sita4ra is a new version of the K3 SoC family for industrial
    control, motor control, remote IO, IoT gateway etc., similar to the
    older AM65x family. Two reference machines are added alongside.
 
 Among the newly added machines, there is a very clear skew towards 64-bit
 machines now, with 12 32-bit machines compared to 23 64-bit machines. The
 full list sorted by SoC is:
 
  - ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
  - Allwinner A10: Topwise A721 Tablet
  - Amlogic GXL: MeCool KII TV box
  - Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
  - Broadcom BCM4908: TP-Link Archer C2300 V1 router
  - MStar SSD202D: M5Stack UnitV2 camera
  - Marvell Armada 38x: ATL-x530 ethernet switch
  - Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311,
    Asus Flip CM3, Asus Detachable CM3
  - Mediatek MT8516/MT8183: OLogic Pumpkin Board
  - NXP i.MX7: reMarkable Tablet
  - NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
  - Nuvoton NPCM730: Quanta GBS BMC
  - Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
  - Qualcomm MSM8998: OnePlus 5/5T phones
  - Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
  - Rockchip RK3399: NanoPi R4S board
  - STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM,
    EDIMM2.2 Starter Kit, Carrier, SOM
  - TI AM65: Siemens SIMATIC IOT2050 gateway
 
 There is notable work going into extending already supported machines
 and SoCs:
 
  - ASpeed AST2500
  - Allwinner A23, A83t, A31, A64, H6
  - Amlogic G12B
  - Broadcom BCM4908
  - Marvell Armada 7K/8K/CN91xx
  - Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
  - NXP i.MX8Q, i.MX8MM, i.MX8MP
  - Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
  - Renesas R-Car M3, V3U
  - Rockchip RK3328, RK3399
  - STEricsson U8500
  - STMicroelectronics STM32MP141
  - Samsung Exynos 4412
  - TI K3-AM65, K3-J7200
  - TI OMAP3
 
 Among the treewide cleanups and bug fixes, two parts stand out:
 
  - There are a number of cleanups for issues pointed out by 'make
    dtbs_check' this time, and I expect more to come in the future as we
    increasingly check for regressions.
 
  - After a change to the MMC subsystem that can lead to unpredictable
    device numbers, several platforms add 'aliases' properties for these
    to give each MMC controller a fixed number.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCDJB4ACgkQmmx57+YA
 GNk40w/+KxYAbE/oBd1Ijcj1d5IzjIr0ZQpub4qYrH/uFEIessW3iAb+MrTC5Uif
 EfmIwm+wPYb/8M40ZQiWHG/3SvTFdm7KyyvnimppMAXYmbIAqJAZ0AgKbsJVaJ5e
 JMtzrmHdBahMeHtuEW8yiIBUwn6qWCHwN+H5C3qPJRTlWxyLOKh+GhET5FasgXsc
 eiQiUYpVAa3x1lI5lwQcpcPBCHJzLe3ic3PFSmqcTF/2REYqtXAtpdr0/7dAH1x0
 9UHRuUMfAv2IO/A3we5TF6ykxaEjAe1fxPDzGDI4cIX0kCf9RmmRmtj61aSozs18
 4CPDBbIOa0Pu6RZVo2EJNBQcZvY4bFu3R0BW8RCF/QVJh7A0gS48AO9LOL0TWCqK
 ToAS/DuuMSKdE4sn7rzSq+E+mGnDDpYzrtyQ7qaXestKg/l0HtyOzdAxIm2Fy5rH
 e74zUDpHgRd4XZ/bjUDbK9Ps+e+bjYuqBtPMskki8GZyUogB24BjjegsAgQxa49Q
 mRSF4O8OPHiaVli643SLqL2K1jgn7Qc8GjeH5abU/EXzdjLtIb70kT7Pa3hcvElu
 wprpVZKxFA0WnSmmRjxsHNDl2SGS63hM+7RcH5axIPU5vAXn2vCla2LOdahKk+wL
 TXzkDsbYvmX9O+CTvzxOEMFQtbQpl12Hy5RrvUKtqZ5XvibXMGk=
 =SpTo
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "There are six new SoCs added this time.

  Apple M1 and Nuvoton WPCM450 have separate branches because they are
  new SoC families that require changes outside of device tree files.
  The other four are variations of already supported chips and get
  merged through this branch:

   - STMicroelectronics STM32H750 is one of many variants of STM32
     microcontrollers based on the Cortex-M7 core.

     This is particularly notable since we rarely add support for new
     MMU-less chips these days. In this case, the board that gets added
     along with the platform is not a SoC reference platform but the
     "Art Pi" (https://art-pi.gitee.io/website/) machine that was
     originally design for the RT-Thread RTOS.

   - NXP i.MX8QuadMax is a variant of the growing i.MX8
     embedded/industrial SoC family, using two Cortex-A72 and four
     Cortex-A53 cores.

     It gets added along with its reference board, the "NXP i.MX8QuadMax
     Multisensory Enablement Kit".

   - Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
     7c) that is used in some Chromebooks and Windows laptops.

     Only a reference board is added for the moment.

   - TI AM64x Sita4ra is a new version of the K3 SoC family for
     industrial control, motor control, remote IO, IoT gateway etc.,
     similar to the older AM65x family.

     Two reference machines are added alongside.

  Among the newly added machines, there is a very clear skew towards
  64-bit machines now, with 12 32-bit machines compared to 23 64-bit
  machines. The full list sorted by SoC is:

   - ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
   - Allwinner A10: Topwise A721 Tablet
   - Amlogic GXL: MeCool KII TV box
   - Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
   - Broadcom BCM4908: TP-Link Archer C2300 V1 router
   - MStar SSD202D: M5Stack UnitV2 camera
   - Marvell Armada 38x: ATL-x530 ethernet switch
   - Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
     CM3, Asus Detachable CM3
   - Mediatek MT8516/MT8183: OLogic Pumpkin Board
   - NXP i.MX7: reMarkable Tablet
   - NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
   - Nuvoton NPCM730: Quanta GBS BMC
   - Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
   - Qualcomm MSM8998: OnePlus 5/5T phones
   - Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
   - Rockchip RK3399: NanoPi R4S board
   - STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
     Starter Kit, Carrier, SOM
   - TI AM65: Siemens SIMATIC IOT2050 gateway

  There is notable work going into extending already supported machines
  and SoCs:

   - ASpeed AST2500
   - Allwinner A23, A83t, A31, A64, H6
   - Amlogic G12B
   - Broadcom BCM4908
   - Marvell Armada 7K/8K/CN91xx
   - Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
   - NXP i.MX8Q, i.MX8MM, i.MX8MP
   - Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
   - Renesas R-Car M3, V3U
   - Rockchip RK3328, RK3399
   - STEricsson U8500
   - STMicroelectronics STM32MP141
   - Samsung Exynos 4412
   - TI K3-AM65, K3-J7200
   - TI OMAP3

  Among the treewide cleanups and bug fixes, two parts stand out:

   - There are a number of cleanups for issues pointed out by 'make
     dtbs_check' this time, and I expect more to come in the future as
     we increasingly check for regressions.

   - After a change to the MMC subsystem that can lead to unpredictable
     device numbers, several platforms add 'aliases' properties for
     these to give each MMC controller a fixed number"

* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
  dt-bindings: mali-bifrost: add dma-coherent
  arm64: dts: amlogic: misc DT schema fixups
  arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
  arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
  arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
  ARM: dts: mstar: Add a dts for M5Stack UnitV2
  dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
  dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
  arm64: dts: mt8183: fix dtbs_check warning
  arm64: dts: mt8183-pumpkin: fix dtbs_check warning
  ARM: dts: aspeed: tiogapass: add hotplug controller
  ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
  ARM: dts: aspeed: Rainier: Update to pass 2 hardware
  ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
  ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
  ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
  ARM: dts: qcom: sdx55: add IPA information
  ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
  dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
  ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
  ...
2021-04-26 12:20:49 -07:00
Andre Przywara
3dd4ce4185
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
Commit 941432d007 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.

However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.

Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.

Fixes: 941432d007 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Ashley <contact@victorianfox.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
2021-04-07 13:41:35 +02:00
Samuel Holland
73088dfee6 arm64: dts: allwinner: Use the new r_intc binding
The binding of R_INTC was updated to allow specifying interrupts other
than the external NMI, since routing those interrupts through the R_INTC
driver allows using them for wakeup.

Update the device trees to use the new binding.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-03-06 15:39:18 +08:00
Andre Przywara
941432d007
arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card
The SD card on the SoPine SoM module is somewhat concealed, so was
originally defined as "non-removable".
However there is a working card-detect pin (tested on two different
SoM versions), and in certain SoM base boards it might be actually
accessible at runtime.
Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the
non-removable flag, even though the SD card slot is perfectly accessible
and usable there. (It turns out that just *my* board has a broken card
detect switch, so I originally thought CD wouldn't work on the LTS.)

Drop the "non-removable" flag to describe the SD card slot properly.

Fixes: c3904a2698 ("arm64: allwinner: a64: add DTSI file for SoPine SoM")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-5-andre.przywara@arm.com
2021-01-14 12:49:56 +01:00
Vasily Khoruzhick
ac90484308 arm64: dts: allwinner: a64: enable DVFS
Add CPU regulator and operating points for all the A64-based boards
that are currently supported to enable DVFS.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-13 16:54:53 +08:00
Clément Péron
cabbaed719
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for
copyright notice.

Update this to keep a coherency.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16 11:16:14 +01:00
Clément Péron
b4b8f2c961
arm64: dts: allwinner: Convert license to SPDX identifier
Use a shorter SPDX identifier instead of pasting the
whole license.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16 11:16:04 +01:00
Clément Péron
d2ab1a6756
arm64: dts: allwinner: Fix wrong license header
Some headers specify that files are under dual-licensed GPL2.0+
and X11. But in fact, it turns out that the full licenses texts
associated are GPL2.0+ and MIT.

Fix license headers to reflect real licenses associated.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-16 11:15:55 +01:00
Chen-Yu Tsai
07de90945c arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
The A64 datasheet lists the supply rail for the headphone amp's charge
pump as "CPVDD". cpvdd-supply is the name of the property for this power
rail specified in the device tree bindings. "HPVCC" was the name used in
the A33 datasheet for the same function.

Rename the supply so it matches the datasheet and bindings.

Fixes: c56689e6f2 ("arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec")
Fixes: 6de8e71784 ("arm64: dts: allwinner: a64: enable sound on Pinebook")
Fixes: 498c21f233 ("arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-03-21 17:04:14 +08:00
Vasily Khoruzhick
498c21f233 arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
This commit enables I2S, digital and analog parts of audiocodec on
Pine64 and SoPine boards.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[wens@csie.org: Dropped headphone_amp; added headphone amp regulator supply]
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-23 23:22:51 +08:00
Emmanuel Vadot
edb24ffe14
arm64: allwinner: a64-sopine: Add cd-gpios to mmc0 node
The card detect GPIO for Sopine and Pine64-LTS is PF6.
Add this to the dts.

Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-22 09:43:02 +02:00
Emmanuel Vadot
4661c3afef
arm64: dts: allwinner: sun50i: a64: Add spi flash node for sopine
The Sopine and Pine64-LTS have a winbond w25q128 spi flash on spi0.
Add a node for it.

Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-18 09:29:48 +02:00
Jagan Teki
7d556bfc49 arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
Since current tree support AXP803 regulators,
replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
it need to replace.

Tested mmc0 on sopine baseboard.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-05 09:31:56 +01:00
Icenowy Zheng
78c3cbc80f arm64: allwinner: a64: add AXP803 PMIC support to SoPine and the baseboard
The SoPine SoM has an AXP803 PMIC connected to the RSB bus of the A64
SoC, and the regulators of the PMIC are used both on the SoM itself and
on the official baseboard

Add related device tree parts to the SoPine SoM DTSI file and the
baseboard DT.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-07-24 09:56:00 +02:00
Icenowy Zheng
c3904a2698 arm64: allwinner: a64: add DTSI file for SoPine SoM
SoPine is a SoM by Pine64, which have a gold finger compatible with the
slot of DDR3 SODIMM (signals are not compatible), and have an A64, an
AXP803, a LPDDR3 DRAM chip, a power led and a MicroSD slot on it.

The card detect pin of the MicroSD slot on the SoM is pulled down, which
makes it unusable; however, the slot is at the surface of the SoM that
is closed to the baseboard, so it's nearly impossible to hot-swap it,
thus I make it non-removable.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-07 15:25:46 +02:00