The Allwinner A100/A133 Ethernet MAC (EMAC) is compatible with the A64
one and needs access to the syscon register for control of the
top-level integration of the unit.
Note that there are two such controllers on the sun50iw10 die, which are
the same unit with a different top-level syscon register offset.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250707165155.581579-4-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100/A133 supports both RGMII and RMII for its Ethernet
MAC (EMAC) controller. Add corresponding pin definitions.
Note that the sun50iw10 die actually includes two ethernet controllers,
the second of which is rarely exposed to pins. Call the first controller
"emac0" to distinguish it from the second that may be added later.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250707165155.581579-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The manual for the Allwinner A133 SoC mentions that the maximum
supported MMC frequency is 150 MHz, for all of the MMC devices.
Describe that in the DT entry, to help drivers setting the right
interface frequency.
Fixes: fcfbb8d9ec ("arm64: allwinner: a100: Add MMC related nodes")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505202416.23753-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add an Operating Performance Points table for the CPU cores to
enable Dynamic Voltage & Frequency Scaling on the A100.
Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
[masterr3c0rd@epochal.quest: fix typos in -cpu-opp, use compatible]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-14-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 has a system configuration block, denoted as SYS_CFG
in the user manual's memory map. It is undocumented in the manual, but
a glance at the vendor tree shows this block is similar to its
predecessors in the A64 and H6. The A100 also has 3 SRAM blocks: A1, A2,
and C. Add all of these to the SoC's device tree.
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241218-a100-syscon-v2-2-dae60b9ce192@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A100 has 3 MMC controllers, one of them being especially targeted to
eMMC. Let's add nodes on dts.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-10-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 has two HCI USB controllers, a OTG controller and a
USB PHY. The PHY is compatible with that used by the D1, while the OTG
controller is compatible with the A33. Add nodes for these to the base
DTSI.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
[masterr3c0rd@epochal.quest: fallback to a33-musb and d1-usb-phy, edited message]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Parthiban Nallathambi <parthiban@linumiz.com>
Link: https://patch.msgid.link/20241031070232.1793078-7-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the Performance Monitoring Unit (PMU) device tree node to the A100
.dtsi, which tells DT users which interrupts are triggered by PMU overflow
events on each core.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-2-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The I2C controllers in the A100 SoC are all connected to the DMA engine.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org
The A100 SoC has a DMA controller that supports 8 DMA channels
to and from various peripherals.
Add a device node for it.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org
The I2C controllers in the A100 SoC are newer-generation hardware
which includes an offload engine. Signify that by including the
allwinner,sun8i-v536-i2c fallback compatible, as V536 is the first
SoC with this generation of I2C controller.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702052544.31443-2-samuel@sholland.org
The thermal zones one the A100 are called $device-thermal-zone.
However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
