This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
-----BEGIN PGP SIGNATURE-----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=Q4jK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Sghw
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for 6.1
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
* tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom: include defconfig in MAINTAINERS
ARM: multi_v7_defconfig: enable more Qualcomm drivers
ARM: qcom_defconfig: enable more Qualcomm drivers
Link: https://lore.kernel.org/r/20220921153734.1314952-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the commit 617d32938d ("rpmsg: Move the rpmsg control device
from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two.
By default give everyone who had the old driver enabled the rpmsg_ctrl
driver too.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHFsQAKCRCKwlD9ZEnx
cFnnAP0WWCnx50+oodGIJfcpb/QDcmXXVPa4EVrf92TvgqWrCQD+Nel3En9EYaWr
wt+GR2aZpa+E9Kfa9OovTzUWzvHiXw8=
=fwbH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jebc
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v6.1
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Refresh for v6.0-rc1
Link: https://lore.kernel.org/r/cover.1662111126.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_SOC_AC97 symbol was recently enabled but does not
actually exist. From the patch description, I assume that this
was meant to be CONFIG_SND_SOC_AC97_CODEC, which is used in
imx_v6_v7_defconfig.
Fixes: 2cc1cd26e9 ("ARM: configs: Enable ASoC AC'97 glue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now default-enabled when CONFIG_SOC_SAMA7 is
used, so the defconfig entry can be dropped.
Fixes: f611af4c3b ("ARM: at91: Kconfig: implement PIT64B selection")
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
USB_FSL_USB2 is no longer available for Arm platforms and
was replaced by the chipidea driver.
Fixes: a390bef7db ("usb: gadget: fsl_mxc_udc: Remove the driver")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is selected by CONFIG_SND_SOC_FSL_ASOC_CARD=m, so the
extra line is redundant.
Fixes: 212e3b6b87 ("ARM: configs: Enable more audio support for i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PTP support is now enabled by default for configurations with
ethernet support, so drop the redundant entries in defconfig
files.
Fixes: e5f3155267 ("ethernet: fix PTP_1588_CLOCK dependencies")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now a hidden symbol, so just drop the defconfig line.
Fixes: 42d95d1b3a ("drm/rcar: stop using 'imply' for dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mutually exclusive with the new 8250_OMAP
driver, so 'make defconfig' turns it off already. Drop
the reference now.
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Fixes: f98d45145e ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This option is 'default y' and has always been this way, the
line was added in error.
Fixes: dfe21dcaba ("ARM: defconfig: Enable ax88796c driver for Exynos boards")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Integrator now selects the regulators and versatile selects the
reset driver, so the correspondig options can be dropped from
the defconfig files.
Fixes: d2854bbe5f ("ARM: integrator: Add some Kconfig selections")
Fixes: 1c6e288da6 ("ARM: versatile: move restart to the device tree")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Refresh the defconfig for Renesas ARM systems:
- Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies
(RZN1D-DB),
- Move CONFIG_CAN_RCAR=y (moved in commit d7786af598 ("net:
Kconfig: move the CAN device menu to the "Device Drivers"
section")),
- Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB),
- Enable RZ/N1 Pin control support (RZN1D-DB),
- Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable Qualcomm drivers:
1. Command DB (used in SDX55 and SDX65).
2. On Chip Memory - OCMEM (used in MSM8974)
3. RPMh and RPMh Power domain (used in SDX55 and SDX65).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-3-krzysztof.kozlowski@linaro.org
Enable Qualcomm drivers:
1. socinfo driver to provide some basic information about the
SoC being used.
2. Remote filesystem memory driver (used in MSM8974).
3. RPM Power domain (used in MSM8226).
4. Sleep stats driver (used in MSM8916, MSM8974 and APQ8084).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-2-krzysztof.kozlowski@linaro.org
The top-level platform selection is mostly meaningless these days after
almost everything is sorted below the CONFIG_ARCH_MULTIPLATFORM, with
the only exception being the 20+ year old StrongARM based machines.
Make this more consistent by removing the entire choice statement and
moving the StrongARM specific options into regular platform specific
Kconfig files.
The three platforms (footbridge, rpc and sa1100) are still mutually
exclusive and cannot coexist with other ARMv4/v5 machines, but since
there are only three of them and we will not add more, this can be
expressed using Kconfig 'depends on' statements.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
cUTAoWxAf5orClAC22ZU
=Vcqd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Remove the obsolete 'efivars' sysfs based interface to the EFI variable
store, now that all users have moved to the efivarfs pseudo file system,
which was created ~10 years ago to address some fundamental shortcomings
in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel.
-----BEGIN PGP SIGNATURE-----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=VVQ6
-----END PGP SIGNATURE-----
Merge tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull efivars sysfs interface removal from Ard Biesheuvel:
"Remove the obsolete 'efivars' sysfs based interface to the EFI
variable store, now that all users have moved to the efivarfs pseudo
file system, which was created ~10 years ago to address some
fundamental shortcomings in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel"
* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: vars: Move efivar caching layer into efivarfs
efi: vars: Switch to new wrapper layer
efi: vars: Remove deprecated 'efivars' sysfs interface
Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile
for booting were grandfathered in, with about half of them either
removed or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files as
'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at
the moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files.
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
-----BEGIN PGP SIGNATURE-----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=wd/l
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM boardfile deprecation from Arnd Bergmann:
"Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile for
booting were grandfathered in, with about half of them either removed
or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files
as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files"
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
ARM: iop32x: mark as unused
ARM: s3c: mark most board files as unused
ARM: omap1: add Kconfig dependencies for unused boards
ARM: sa1100: mark most boards as unused
ARM: footbridge: mark cats board for removal
ARM: mmp: mark all board files for removal
ARM: ep93xx: mark most board files as unused
ARM: davinci: mark all ATAGS board files as unused
ARM: orion: add ATAGS dependencies
ARM: pxa: add Kconfig dependencies for ATAGS based boards
ARM: add CONFIG_UNUSED_BOARD_FILES
ARM: add ATAGS dependencies to non-DT platforms
This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk drivers
that are still under review and will be merged through the corresponding
subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC
on the main chip, plus an I/O chip and memory in the same
-----BEGIN PGP SIGNATURE-----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=7Id+
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
This branch includes the usual updates to defconfig files, enabling
additional driver support for the supported platforms.
There is also a global refresh for all of them that reorders the
lines according to the 'savedefconfig' output, but without removing
lines that are no longer part of the refresh.
I went through the most common removed lines to also address them
while making sure to catch renamed options and add them back
under the new name.
The boardfile deprecation branch is based on top of this to avoid
conflicts against removing the unused boardfile configs from the
generic defconfig files.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLo+14ACgkQmmx57+YA
GNnFGw/+Ml2Jich+21ZIcgcAHjrMXq89lCoRa+3clGcxjDl97ZshNumqmRlgXqhM
SlcqoA8gxFzx6SAFkCgxmi2m3+Cf8041VglM9YG9zcQnKxvcaRmAnLJ6X8ruwrRy
OLHimRi187Wp33c4Y4On0s51g+F+cDHAJA9zmAoGISqPCluTkh/QeD9LXWSfBvFI
6203Hpbge69WzOL520zW7DBaLIRNL8qxSL3Pau6VUwHm2I2GvJ1WHE1S5kQwrd1a
LKERfZswaBQtV3RJFRPigEqXzdzWAnD6XBLe1idGzaU52YAY6pxqQHTzOeVxlEPP
m+w4jN6wEGK+iu8f0hjEnfr2qtM1Qx45UCvmg+tyY7WIwMWN304WDi+vgCpXPUWp
W+IZNk6KPY9Bd3OauFtsiHHz9xXALidJRJT2JojnKDnQKK9J/iTpnBU2fPbpDNiC
XOWcbm6e2R7U34LZZE2ursVqPk1iklXfb49/A+nl2x4MkxeX2va1QgyqJf6T6I9y
1avFY4V62lWvrEEMyKu+d7lpRKs3gj0Ky8W/R6+zLlnh4R2r9R+/BJAWi1MiP7qU
ZpqWPc7m6cJcUC8Jgf2k+sDG8FNUWn0o6LNbCgv1m5GEYzzr1K9b3+KKV5JB1A9C
Hjz9NMRXEOHm+QNvmbgXpCZjx9ga3Av+XAKN4pZ7JG9gc8fnrp0=
=2GbW
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"This branch includes the usual updates to defconfig files, enabling
additional driver support for the supported platforms.
There is also a global refresh for all of them that reorders the lines
according to the 'savedefconfig' output, but without removing lines
that are no longer part of the refresh.
I went through the most common removed lines to also address them
while making sure to catch renamed options and add them back under the
new name.
The boardfile deprecation branch is based on top of this to avoid
conflicts against removing the unused boardfile configs from the
generic defconfig files"
* tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: Sync some configs with savedefconfig
arm64: refresh defconfig file
ARM: defconfig: kill remnants of CONFIG_LEDS
ARM: defconfig: remove broken CONFIG_THUMB disables
ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y
ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries
ARM: defconfig: remove irda remnants
ARM: refresh defconfig files
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
ARM: multi_v7_defconfig: Update configs for BCM63138
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable Allwinner built in CODECs
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
arm64: defconfig: Enable gpio-fan support
arm64: defconfig: Enable DRM_V3D
ARM: configs: Enable DRM_V3D
arm64: defconfig: Enable R8A779G0 SoC
...
Krzysztof Halasa has kept the cns3xxx platform working for a long time
but has moved away from working on it. The OpenWRT port was dropped in
2020, and support for the Gateworks Laguna platform never made it into
the mainline kernel, which only supports the reference design.
Further, the ARM11MPCore has an unresolved issue with instruction cache
coherency, and removing support for the remaining platforms using this
core would be the easiest solution.
Mark the entire platform as unused now, to be removed in early 2023 if
no users show up.
Cc: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/lkml/20210616152326.GG22278@shell.armlinux.org.uk/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The iop32x platform has recently been converted to be part of
the multiplatform configuration, and it should be possible to
keep it alive for longer by making it boot from devicetree like
we did for the related ixp4xx platform.
However, it appears that no users remain at this point, so just
mark the entire platform depending on CONFIG_UNUSED_BOARD_FILES,
with the intention of removing it in early 2023.
If any users remain, please speak up now.
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is already scheduled for removal in early 2023,
with s3c64xx meeting the same fate a year later.
Most of the s3c64xx board files appear to be unused, as the better
maintained ones already got converted to DT. The main exception is
the Wolfson Cragganmore board, which remains in use as the reference
design for Wolfson/Cirrus devices. As the other boards get removed,
this one stays around along with the DT based machines.
The s3c6400_defconfig file now disables the unused boards, while the
s3c24xx defconfig files all turn on CONFIG_UNUSED_BOARD_FILES to
remain usable.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Legacy board files with no known users are planned to get removed in
early 2023, and this covers the majority of the omap1 boards as well.
According to Tony, the actual users are all on OSK, Nokia770, and
AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu,
which is convenient for testing, so all five stay around past the initial
board removal.
As omap1 is now part of the multiplatform build and uses the common-clk
framework, it has become easier to convert these to use devicetree
based booting in the future.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most Arm board files are unused and will be removed in early
2023 if no remaining users show up. For the sa1100 platform,
the machines that are still in use are:
- Russell's Assabet development board
- Linus' H3600 iPaq PocketPC
- Collie as the only qemu-supported board, to allow
testing by others
All remaining sa1100 boards are marked to depend on
CONFIG_UNUSED_BOARD_FILES to give potential users a
last chance to speak up.
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three remaining footbridge boards, as the CO285 and the HP
personal server got removed already over the years.
Russell still uses his ebsa285, while both Linus and Marc have a NetWinder
that they use for testing. Nobody so far replied that they are using cats,
so it goes on the long list of machines to be removed in early 2023 if
it stays like this.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mmp platform supports both ATAGS based board files and DT
booting, but it appears that nobody has been interested in
board files for a long time.
Mark all of them for removal in early 2023 with a dependency
on CONFIG_UNUSED_BOARD_FILES, leaving only the DT support
for the future, unless someone pops up who uses them.
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining ARM board files in the kernel have no known users,
and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family
of reference boards, while Nikita Shubin has a ts7250 and is working on
a device tree conversion for those. Hartley Sweeten has a
MACH_VISION_EP9307 that is still in use.
This is a total of nine machine definitions that we will keep
around, but these are all similar machines and are defined in only
two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away.
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remaining board files are only kept because nobody has stepped up to
remove them.
Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the
plan to remove them in early 2023 after the next longterm supported
kernel is out.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining arm board files in the kernel are unused and will be
removed in early 2023 if no users step up. So far I got no user replies
about the orion5x and mv78xx0 machines, but these are still supported
in the default kernel of the Debian 'armel' (armv5 softfloat) distro,
and there is an active project on github that tries to keep some of
these machines working, and Mauri Sandberg is working on a DT conversion
for the D-Link DNS-323.
It appears the Debian-on-Buffalo project has not got the Terastation WXL
working in a few years, and the other mv78xx0 machines are just the
reference designs, so I assume none of these have remaining users.
For the Orion5x family, the same is probably true for its reference
implementations (RD88Fxxxxx, DB88F281) and the machines with less than
64MB of memory (WNR854T, WRT350N v2).
The remaining nine machines are now scheduled to be kept for at least
2023, hopefully to be replaced with DT based versions.
The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES
to still build, while the other affected defconfig files lose the
specific boards.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/1000001101000/Debian_on_Buffalo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the traditional board files are no longer used by anyone and
will be removed next year, while the DT based machine support remains.
Adding a CONFIG_ATAGS dependency around all the board files means
that they now actaully get disabled when ATAGS support is left out,
and the individual boards that have no known users are marked
as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove
them in early 2023 unless someone else shows interest.
Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi
family of Sharp Zaurus SL machines to DT, to make that easier those
remain for the moment.
In addition, the "Gumstix" machine is the one that is supported in
qemu with 256MB of RAM, which makes it particularly nice for testing,
I'm leaving it in hoping that someone can take care of converting it to
DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines,
so these could be saved as well if anyone wants to conver them to DT.
This seems less likely, so I'm marking them as unused for the time being.
For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig
now only enable the boards that are not marked as unused, while all the
other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow
building the kernels.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Laurence de Bruxelles <lfdebrux@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_LEDS was replaced by CONFIG_NEW_LEDS over ten years ago with commit
fa8bbb13ab ("ARM: use new LEDS CPU trigger stub to replace old one"),
but some defconfig files still reference it.
Replace it and its sub-options with the corresponding new versions.
Some of these machines may not actually have a new-style LED driver,
and I did not check them individually as most of the machines are
going away soon anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 1515b186c2 ("ARM: make configuration of userspace
Thumb support an expert option"), CONFIG_THUMB cannot be disabled
unless one turns on CONFIG_EXPERT first.
This is probably for the better, so remove the statements that
turn it off.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default is always 0x0 after commit 39c3e30456 ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
-----BEGIN PGP SIGNATURE-----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=NP7q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EGHr
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM SoCs defconfig changes for 5.20, please
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
* tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Update configs for BCM63138
ARM: configs: Enable DRM_V3D
Link: https://lore.kernel.org/r/20220711164451.3542127-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, when booting Linux on a imx28-evk board there is
no display activity.
Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS,
CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G,
CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO,
CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8
and CONFIG_FONT_8x16.
Based on commit c54467482f ("ARM: imx_v6_v7_defconfig: enable fb").
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 5d9db88376 ("efi: Add support for a UEFI variable filesystem")
dated Oct 5, 2012, introduced a new efivarfs pseudo-filesystem to
replace the efivars sysfs interface that was used up to that point to
expose EFI variables to user space.
The main problem with the sysfs interface was that it only supported up
to 1024 bytes of payload per file, whereas the underlying variables
themselves are only bounded by a platform specific per-variable and
global limit that is typically much higher than 1024 bytes.
The deprecated sysfs interface is only enabled on x86 and Itanium, other
EFI enabled architectures only support the efivarfs pseudo-filesystem.
So let's finally rip off the band aid, and drop the old interface
entirely. This will make it easier to refactor and clean up the
underlying infrastructure that is shared between efivars, efivarfs and
efi-pstore, and is long overdue for a makeover.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
With all the header files out of the way, and the clock driver
converted to the common framework, nothing stops us from building
OMAP together with the other platforms.
As usual, the decompressor support is a victim here, and is
only available when CONFIG_DEBUG_LL is configured for the
particular board.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request,
or that came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including
a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE.
-----BEGIN PGP SIGNATURE-----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=2qok
-----END PGP SIGNATURE-----
Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went through
several rebases before the merge window as bugs were found, so they
remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files.
-----BEGIN PGP SIGNATURE-----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=cnSb
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
The generic audio card for Freescale platforms is used by a wide range
of i.MX systems and also has selects for the various audio controllers
used on them so will help with systems that don't use that specific card
too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220513121258.168364-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a
managed ethernet network switch with either 8 copper ports or 6 copper
ports and 2 SFP cages.
Enable all required kconfig symbols, either as module where possible or
compiled-in where it is not possible.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which
is the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of the
mach/*.h headers to allow the platform to be part of a generic ARMv4/v5
multiplatform kernel. The last bit that enables this support is still
missing here while we wait for some last dependencies to make it into
the mainline kernel through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets completed
here along with a few additional cleanup. At the same time, the s3c24xx
and s3c64xx are now deprecated and expected to get removed in the future.
The PXA and OMAP1 bits are in a separate branch because of dependencies.
Once both branches are merged, only the three Intel StrongARM platforms
(RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels,
and there are no plans to include these.
-----BEGIN PGP SIGNATURE-----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=CTtN
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
"This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which is
the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of
the mach/*.h headers to allow the platform to be part of a generic
ARMv4/v5 multiplatform kernel.
The last bit that enables this support is still missing here while we
wait for some last dependencies to make it into the mainline kernel
through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets
completed here along with a few additional cleanup. At the same time,
the s3c24xx and s3c64xx are now deprecated and expected to get removed
in the future.
The PXA and OMAP1 bits are in a separate branch because of
dependencies. Once both branches are merged, only the three Intel
StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
need separate kernels, and there are no plans to include these"
* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: ixp4xx: Consolidate Kconfig fixing issue
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: config: Refresh IXP4xx config after multiplatform
ARM: omap1: add back omap_set_dma_priority() stub
ARM: omap: fix missing declaration warnings
ARM: omap: fix address space warnings from sparse
ARM: spear: remove include/mach/ subdirectory
ARM: davinci: remove include/mach/ subdirectory
ARM: omap2: remove include/mach/ subdirectory
integrator: remove empty ap_init_early()
ARM: s3c: fix include path
MAINTAINERS: omap1: Add Janusz as an additional maintainer
ARM: omap1: htc_herald: fix typos in comments
ARM: OMAP1: fix typos in comments
ARM: OMAP1: clock: Remove noop code
ARM: OMAP1: clock: Remove unused code
ARM: OMAP1: clock: Fix UART rate reporting algorithm
ARM: OMAP1: clock: Fix early UART rate issues
ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
ARM: omap1: fix build with no SoC selected
...
Lots of smaller additions to the defconfig files for both 32-bit
and 64-bit arm platforms, enabling drivers that are now usable
on common hardware, and a few options to make it possible to boot
a file system image using systemd.
-----BEGIN PGP SIGNATURE-----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=+8LA
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Lots of smaller additions to the defconfig files for both 32-bit and
64-bit arm platforms, enabling drivers that are now usable on common
hardware, and a few options to make it possible to boot a file system
image using systemd"
* tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
ARM: configs: Enable ASoC AC'97 glue
ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig
ARM: configs: at91: Enable AUTOFS_FS required by systemd
ARM: configs: at91: Enable options required for systemd
ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
ARM: configs: at91: sama7: add xisc and csi2dc
ARM: multi_v7_defconfig: add atmel video pipeline modules
ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS
arm64: defconfig: Enable the WM8524 codec driver
arm64: defconfig: Enable modules for arm displays
arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
arm64: defconfig: Enable configs for DisplayPort on J721e
arm64: defconfig: Build Tegra ASRC module
ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
arm: mediatek: select arch timer for mt7629
...
These updates are for platform specific code in arch/arm/, mostly fixing
minor issues. The at91 platform gains support for better power
management on the lan966 platform and new firmware on the sama5
platform. The mediatek soc drivers in turn are enabled for the new
mt8195 SoC.
-----BEGIN PGP SIGNATURE-----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=Eoh1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
Not much dramatic changes at this time, but we've received quite
a lot of changes for ASoC, while there are still a few fixes and
quirks for usual HD- and USB-auido. Here are some highlights.
* ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
* Others
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver
-----BEGIN PGP SIGNATURE-----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=5qBk
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
Enable HPE GXP Architecture and its watchdog for base support for HPE
GXP SoCs.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AC'97 was quite commonly used on at least i.MX designs so enable the
glue code that allows use of AC'97 with ASoC based designs to improve
testing coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220513120632.168148-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the Qualcomm random number generator and hardware crypto
drivers, as well as DebugFS support, in the qcom defconfig.
-----BEGIN PGP SIGNATURE-----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=/s3v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E9Ka
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for v5.19
This enables the Qualcomm random number generator and hardware crypto
drivers, as well as DebugFS support, in the qcom defconfig.
* tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: enable debug fs support
ARM: qcom_defconfig: enable options for Qualcomm random number generator
Link: https://lore.kernel.org/r/20220509182209.317208-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3OOMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM43JwgAgKOb0UndVfyEOV02LPQoVYiEN0P9
cKbenz/IpXFT0fDYyTezg1BmU7T5KH4dg8R40JZdmeOjhEkpigXs1EEVEeBy9Dws
j7RjV+vL/i4shN4j6dYXsWGxLf3E96eNIqMfy4kRfJygTbg/99sgC/YT29OI1TJO
uyJJHqmBvLcfG4kAoYc3W17PM37JD9T6A3DvDZTn5PRgBd8ywK5ydyrqgKgTG6f9
CD6nIyW396rC26+v0Gzrc/0zgxGjLJznD2iiGxyR8Sa6ILYdyXQEIsK5XOst9/PS
E0EnM3HA3icr1bvUUyztdRBuRlYq/BR73GCAWHSpi55Nfh5bT3dCHrpZwQ==
=kFqE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pAvl
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.19:
- Enable the WM8524 codec driver as module in arm64 defconfig for audio
support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.
* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the WM8524 codec driver
ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD
Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The BeagleBone Black supports audio over HDMI, using a combination of the
DaVinci McASP (used for audio by a very large proportion of DaVinci systems
with audio support) and a TDA998x device driving the HDMI link (this is a
very widely used driver). Build both drivers as modules in multi_v7_defconfig
so they can be more easily included in testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PXA is now ready to be built into a single kernel with all the
other ARMv5 platforms, so change the Kconfig bit to finish it
off. The mach/uncompress.h support is the last bit that goes away,
getting replaced with the normal DEBUG_LL based approach.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
-----BEGIN PGP SIGNATURE-----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=aOGl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FYRO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Link: https://lore.kernel.org/r/20220506143005.3916655-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Align all at91 defconfigs to required options for systemd.
The missing of autofs would cause warnings on boot
when not available.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Even smaller embedded systems are using systemd these days, as
are test automation systems like KernelCI, so it is useful to be
able to use systemd on these boards by default. Enable options
that are missing in the at91_dt_defconfig, cgroups which is
critical and autofs4 which is less critical but causes warnings
on boot when not available.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220505171043.553079-1-broonie@kernel.org
Address read only block filesystems like SquashFS, and use MTD_UBI_BLOCK
to benefit of UBI's bit-flip handling and wear-levelling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220420134740.193563-3-tudor.ambarus@microchip.com
Using mtdblock on raw flashes is generally a bad idea as it lacks
wear-leveling, bad block handling or power-cut management.
What happens when you use mtdblock and you change any sector of your
mtdblockX device, is that it reads the whole corresponding eraseblock into
the memory, erases the eraseblock, changes the sector in RAM, and writes
the whole eraseblock back. If you have a power failure when the eraseblock
is being erased, you lose all the block device sectors in it. The flash
will likely decay soon because the eraseblocks will wear out.
Remove this archaic tool as its use case should rather be only for debug
purposes. This means that write-capable block file systems like ext2,
ext3, FAT, etc. will no longer be addressed with at91 defconfigs. For
read only block filesystems like SquashFS, use MTD_UBI_BLOCK instead and
benefit of UBI's bit-flip handling and wear-levelling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220420134740.193563-1-tudor.ambarus@microchip.com
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYmJ3AwAKCRCKwlD9ZEnx
cNa0APwJIXP3GulpMvVC07l9MISB0TuMIKJr7hpix4FWR3UgdAD/Qb4uzseyOt7P
OR1bifu1lIXrha/ABr3dhZr77B2DYwQ=
=9bw+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W1C7
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
* tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.18-rc1
arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support
arm64: defconfig: Enable ARCH_R9A07G054
Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After converting to multiplatform the old IXP4xx defconfig
doesn't even activate the ethernet driver anymore, we need
to refresh this thoroughly.
- Drop options that ARCH_MULTI_V5 selects for us.
- Some options moved around because of multiplatform and
because generic Kconfig movements.
- Drop all MACH_* that do not exist anymore.
- Compress the kernel and initramfs with XZ as the memory
is often limited for these machines.
- Make sure IXP4XX_QMGR and IXP4XX_NPE is selected.
- Make sure the MTD_PHYSMAP_IXP4XX is selected and not
the old MTD_IXP4XX (will be deleted).
- Activate CRYPTO_DEV_IXP4XX
- Add some very basic default drivers such as AT24 EEPROMs
used in many routers.
- Add some kernel configs needed to bring up OpenWrt
which is the only userspace for these devices:
CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD,
EPOLL, OVERLAY_FS and SQUASHFS.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Imre Kaloz <kaloz@openwrt.org>
Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
-----BEGIN PGP SIGNATURE-----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=AH48
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJr+RIACgkQmmx57+YA
GNkxsQ/9E3hL2ClQtrmTr3Zronjk/rtg++G0/V4LjWTtKD6UjcsbJU9hMDCROmw+
FFTfzzeQxq5byvC19VByh6nlmMpFJ8dyrMfhNG1TKTiRyFkZKTwM67ZqneAgb84T
8jaVp9P/iOvdcFUBBL7zDbsIZPjrSPDRiLZmw13y3DkWgFhvM3ixGhv7+tMaXYQU
Yc3VPH9uurZ5Wdk52fX1Iu3hbRwaJw4lFVW+RSKX2O3DznaLCXHF1k/KTtWG2i+l
PaNClQaCWYHG4cinGMKcXkvyhsUJeIcqVP9ESxAa7z7w69wN986tZBwSQbtnw/nR
/lOHjo1mKpe9DU2C4LAxNHwdRWkg9j6In8Y5mccDPgDHHaJWIeVlmutmt/GYB1ek
Gh2vqaqmEZXQr8FGL++sISLB3aspNyknXabtHHztKOPR7DBYyesLtB9L1JSCDVXN
krqcVBO4+yQyhDjAlWLmG2xY+SOyNe158xFrRReUn54/u5WE/fJyFiRc/Zgt9cyD
P4G14iHjVwDNshIKx4pi4aWL9gSf+zc/LIvGG19aW0Z8K5s7lXNYjUMgPZCg8XHX
+H1s67AxoKLVv/+GWZ4Cg6PYH4yTw9PSSn3oXqaZfQ8L9LtEMpqri1Vn0eEq4AbH
OxcPRt3C3GvpekTE7xLi07tTEXd7mnrYtRoCpbBfpZc/+R0kQms=
=12TT
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Link: https://lore.kernel.org/r/20220429080626.494150-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be
used to build a basic kernel for BCM47622 booting to console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In a recent discussion[1] it was reported that the binfmt_flat library
support was only ever used on m68k and even on m68k has not been used
in a very long time.
The structure of binfmt_flat is different from all of the other binfmt
implementations because of this shared library support and it made
life and code review more effort when I refactored the code in fs/exec.c.
Since in practice the code is dead remove the binfmt_flat shared library
support and make maintenance of the code easier.
[1] https://lkml.kernel.org/r/81788b56-5b15-7308-38c7-c7f2502c4e15@linux-m68k.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARM
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87levzzts4.fsf_-_@email.froward.int.ebiederm.org
The Logic PD Torpedo baseboard has an ISP1763 USB controller attached
to the GPMC bus. Enable the driver as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220221184107.2321951-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit a96d2ba2d8 ("ASoC: codecs: tlv320aic3x: move I2C to separated
file") split the driver into SPI and I2C code and also provided a
separate configuration option for it.
The RX51 audio fails to probe since this commit, so let's add this
non-obvious configuration option to the defconfig.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Message-Id: <20211216150506.31163-1-merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811. Enable
its driver.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REALTEK and the desired DSA switch need
to be selected explicitly with
CONFIG_NET_DSA_REALTEK_RTL8366RB.
Take this opportunity to update some other minor config
options:
- CONFIG_MARVELL_PHY moved around because of Kconfig
changes.
- CONFIG_SENSORS_DRIVETEMP should be selected since is
regulates the system critical alert temperature on
some devices, which is nice if it is handled even
if initramfs or root fails to mount.
Fixes: 319a70a5fe ("net: dsa: realtek-smi: move to subdirectory")
Fixes: 765c39a4fa ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After all the work that Linus Walleij did on this platform, it can be
part of a generic kernel build as well.
Note that there are known bugs in little-endian mode on ixp4xx, and
no other ARMv5 platform at this point supports big-endian mode, or is
likely to in the future, so there is limited practical value in this,
but it helps with build testing and ixp4xx little-endian support may
get fixed in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After iop32x was converted to the generic multi-irq entry
code, nothing really stops us from building it into a
generic kernel.
The two last headers can simply be removed, the mach/irqs.h
gets replaced with the sparse-irq intiialization from the
board specific .nr_irqs value, and the decompressor debug
output can use the debug_ll hack that all other platforms
use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the custom ISA I/O and the missing sparse-irq support
out of the way, s3c24xx can now be built into the same
kernel as all other ARM9 based platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver for the Qualcomm random number generator and the
userspace crypto API.
This was a tested on a Nexus 5 phone (msm8974 SoC).
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220311154919.1797920-2-bmasney@redhat.com
The CONFIG_TEGRA_VDE has been deprecated and replaced with the new V4L
options after de-staging of the tegra-vde driver. Update the config entry.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is effectively a revert of the temporary disablement
patch. Battery charging now works!
We also enable static battery data for the Samsung SDI
batteries as used by the U8500 Samsung phones.
Cc: Lee Jones <lee.jones@linaro.org>
Fixes: a1149ae975 ("ARM: ux500: Disable Power Supply and Battery Management by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This activates display drivers that give console on the
different U8500 mobile phones, the GNSS subsystem and the
SIRF GNSS driver so we can manage the GPS chips, the regulator
LEDs as used in some phones and one more IIO light sensor driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This just updates the U8500 defconfig to reflect what has
happened in the Kconfig: DRM_PANEL_SONY_ACX424AKP is now
handled by DRM_PANEL_NOVATEK_NT35560, all ST sensors have
SPI version drivers that we don't use, and some debug
options moved around.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The only effect of this symbol is to select PWM_SAMSUNG. Drop it and fix
the affected defconfigs to still keep PWM_SAMSUNG=y. Developers using
MACH_NEO1973_GTA02 and/or MACH_RX1950 now have to manually select PWM and
PWM_SAMSUNG (and get the freedom to select is as a module or not at all).
A side effect of this change is that allmodconfig now contains
PWM_SAMSUNG=m (which was =y before).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220328082638.112185-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The dove platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.
This work was originally done in 2015 as all the ARMv7 machiens
gove moved over to multiplatform builds, but at the time it conflicted
with some patches that Russell was trying to upstream, so we
left it at that.
I hope that there is no longer a need to keep dove separate from the
rest, so we can either add it to the other ARMv7 platforms, or just
replace it with the DT based platform code for the same hardware
in mach-mvebu and remove mach-dove entirely.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the clock support and the interrupts out of the way, ep93xx can be
compiled into the same kernel image as the other ARMv4/v5 platforms. The
last obstacle are the two workarounds for broken boot loaders that
require us to re-initialize the ethernet controller and/or the watchdog
on certain machines.
Move this code into the decompressor sources directly, checking for
each possibly affected machine individually.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The WM8731 driver has been refactored so the I2C and SPI bus code is
separate modules. Refresh multi_v5_defconfig to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: soc@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SoC specific code is generally used for older platforms that don't (yet)
use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire
-----BEGIN PGP SIGNATURE-----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=2fmA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
Various updates for the 32-bit and 64-bit defconfig files, mostly to
enable additional hardware drivers for more machines, specifically for
the Allwinner F1C100, Altera SoCFPGA, Broadcom, Microchip, Qualcomm,
Airoha, Tegra, Renesas, and i.NX.
The multi_v5_defconfig for older ARMv5 configs gets a rework for Andre
Przywara to cleans up the multi_v5_defconfig for some cruft that has
accumulated and drivers that got disabled unintentionally, while Anders
Roxell makes it more useful for running under Qemu.
-----BEGIN PGP SIGNATURE-----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=/9iL
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Various updates for the 32-bit and 64-bit defconfig files, mostly to
enable additional hardware drivers for more machines, specifically for
the Allwinner F1C100, Altera SoCFPGA, Broadcom, Microchip, Qualcomm,
Airoha, Tegra, Renesas, and i.NX.
The multi_v5_defconfig for older ARMv5 configs gets a rework for Andre
Przywara to cleans up the multi_v5_defconfig for some cruft that has
accumulated and drivers that got disabled unintentionally, while
Anders Roxell makes it more useful for running under Qemu"
* tag 'arm-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
ARM: configs: multi_v5: Enable Allwinner F1C100
ARM: configs: clean up multi_v5_defconfig
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
ARM: configs: multi_v5_defconfig: remove deleted platforms
ARM: defconfig: add SMB347 charger driver for p4note
arm: multi_v5: enable configs for versatile
arm64: defconfig: enable Layerscape SFP driver
ARM: configs: at91: sama7: Unselect CONFIG_DMATEST
ARM: configs: at91: add eic
arm64: defconfig: enable the CVP driver
ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
ARM: multi_v7_defconfig: Enable BCM23550 and BCM53573
ARM: multi_v7_defconfig: Enable Broadcom STB USB drivers
ARM: configs: at91: sama7: add config for cpufreq
ARM: configs: at91: sama7: enable cpu idle
ARM: configs: at91: sama7: Enable crypto IPs and software algs
ARM: configs: at91: sama7: Enable UBIFS_FS
ARM: configs: at91: sama7: Enable NAND / SMC
arm64: defconfig: tegra: Enable GPCDMA
...
The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are
currently not selected by any defconfig. sunxi_defconfig only covers the
v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image.
Add the required symbols to multi_v5_defconfig, to give people some sane
default config when playing around with this chip. This is probably more
important as there are surely not many distros out there supporting
ARMv5 out of the box.
This allows my LicheePi Nano board to boot to a busybox prompt.
The zImage size grows by about 50 KB, in detail:
text data bss dec hex filename
10510000 4400700 687740 15598440 ee0368 vmlinux-old
10588592 4469096 686812 15744500 f03df4 vmlinux-new
14922908 arch/arm/boot/Image-old
15067388 arch/arm/boot/Image-new
6388016 arch/arm/boot/zImage-old
6440064 arch/arm/boot/zImage-new
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clean up some cruft accumulated over time:
- The default definition of CONFIG_ZBOOT_ROM_* got fixed in commit
39c3e30456 ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS
value to 0x0"), so we don't need the explicit setting anymore.
- CONFIG_ABX500_CORE now explicitly depends on the ARMv7 ARCH_U8500,
so we don't need to disable that symbol explicitly anymore.
- CONFIG_DEBUG_FS was just moved around in the generated defconfig.
No change to the generated .config or savedefconfig.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-5-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 91185d55b3 ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
led to de-selection of CONFIG_FB, which was a prerequisite for
BACKLIGHT_CLASS_DEVICE, which CONFIG_DRM_PANEL_SIMPLE depended on.
Explicitly set CONFIG_FB, to bring DRM_PANEL_SIMPLE, DRM_PANEL_EDP,
FB_IMX and FB_ATMEL back into the generated .config.
This also adds some new FB related features like fonts and the
framebuffer console.
See also commit 8c1768967e ("ARM: config: mutli v7: Reenable FB
dependency"), which solved the same problem for multi_v7_defconfig.
This relies on [1], to fix a broken Kconfig dependency.
[1] https://lore.kernel.org/dri-devel/20220315084559.23510-1-tzimmermann@suse.de/raw
Fixes: 91185d55b3 ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-4-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow
more fine grained control over the inclusion of certain Kconfig files.
multi_v5_defconfig was selecting some drivers described in
drivers/media/platform/Kconfig, which now wasn't included anymore.
Explicitly set the new symbol in multi_v5_defconfig to bring those
drivers back.
This enables some new V4L2 and VIDEOBUF2 features, but as modules only.
Fixes: 06b93644f4 ("media: Kconfig: add an option to filter in/out platform drivers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-3-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some ARMv5 platforms got removed from the kernel over time, so we don't
need their symbols in the multi_v5_defconfig anymore:
- ARCH_U300 got removed with commit ce1380c9f4 ("ARM: remove u300
platform"), so CONFIG_ARCH_U300 is not around anymore.
- ARCH_U300 was the only platform selecting ARCH_AMBA, which I2C_NOMADIK
depends on. So we won't need this symbol anymore, and can't select it
anyway.
- i.MX27 got converted to DT in 879c0e5e0a ("ARM: imx: Remove i.MX27
board files"). Remove the now obsolete board file version symbols.
No change in the generated .config or savedefconfig.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-2-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make it possible to boot a versatile machine in qemu.
Boot command:
/usr/bin/qemu-system-arm -cpu arm926 -machine versatilepb \
-nographic -nic none -m 256M -monitor none -no-reboot \
-kernel zImage -dtb versatile-pb.dtb \
-append "console=ttyAMA0,115200 rootwait root=/dev/vda" \
-drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \
-device virtio-blk-pci,drive=hd0
When doing build and boot testing, it makes more sense to enable arch
vesatile, serial amba_pl011 and virtio (mmio|blk|pci) to
multi_v5_defconfig to make that boot out of the box, with a modern
virtio (mmio|blk|pci) driver. Using the above commandline. Another way
to build and boot would be to use tuxmake/tuxrun. Tuxmake [1] builds the
kernel, and Tuxrun [2] boots the kernel in qemu. Both projects uses
podman to do the build/tests inside. This makes both project a good
tool to use when finding a regression that you would like someone else
to reproduce with the exact same setup.
tuxmake --runtime podman --target-arch arm \
--toolchain gcc-11 --kconfig multi_v5_defconfig
tuxrun --tuxmake ~/.cache/tuxmake/builds/3072 --device qemu-armv5
[1] https://tuxmake.org/
[2] https://tuxrun.org/
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20220308121933.3967868-1-anders.roxell@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DMA test client should be selected only when one is debugging a DMA
Device driver. There's no need to select the DMA test client by default,
unselect it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220228085906.18508-1-tudor.ambarus@microchip.com
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
-----BEGIN PGP SIGNATURE-----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=AfIE
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm defconfig updates for v5.18
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
* tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables basic bootup support for the Airoha EN7523 SoC.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-5-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
I have no reason to believe these boards have any more users and I
haven't tested them for several years. Removing them may simplify
other changes to the various PXA boards people still care about.
The recent conversion of pxa2xx_spi to GPIO descriptors for example
had to update this board despite no one caring or testing.
Great boards that got me started in kernel development, RIP!
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs
enabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which
allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZfpgAKCRCKwlD9ZEnx
cM5XAP4nyb1rxKQpDWbdozSOmItkytpfC2+NTS9+Ul0mAVz98QD/YfuW1awSR8EE
6iyGVM2WqFbaKKGNEqogHI2eNGvbyAk=
=HkeI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G8H0
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.18
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Disable unneeded 8250 serial options
arm64: defconfig: Enable Audio Graph Card2 driver
Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add config flags for CPUFreq. This includes enabling CPUFreq support,
CPUFreq DT driver and governors, default one being the conservative
governor.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-11-claudiu.beznea@microchip.com
Similar to sama5_defconfig, enable hardware acceleration for the
sama7 crypto IPs, enable crypto software implementations in case
the crypto IPs need a fallback to them, and enable the hash and
skcipher user interfaces in case one wants to offload the crypto
algs to the sama7 crypto IPs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220204135905.512013-1-tudor.ambarus@microchip.com
sama7g5 contains a Static Memory Controller that can communicate with
NAND flashes. Enable UBIFS_FS in case one wants to put an ubifs rootfs
on a NAND flash. CONFIG_CRYPTO_LZO and CONFIG_CRYPTO_DEFLATE appear as
removed because they are selected by CONFIG_UBIFS_FS.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220202070244.150022-1-tudor.ambarus@microchip.com
Enable the Static Memory Controller. Tested with Micron MT29F4G08ABAEAWP
NAND flash. Software error correction is not needed, as the SMC includes
a PMECC error correction hardware module.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111125641.903624-1-tudor.ambarus@microchip.com
The only Renesas platform with 16550 serial ports is Emma Mobile EV2,
which does not need any of the following options:
- CONFIG_SERIAL_8250_DEPRECATED_OPTIONS,
- CONFIG_SERIAL_8250_16550A_VARIANTS,
- CONFIG_SERIAL_8250_PCI,
- CONFIG_SERIAL_8250_PERICOM (new in v5.17-rc1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/caefa806d66b83085c4ceab09819b469088664a1.1643371790.git.geert+renesas@glider.be
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dc ("xen: remove tmem driver").
[akpm@linux-foundation.org: remove now-unreachable code]
Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that
have been removed, and Wasin Thonkaew has a cosmetic change.
-----BEGIN PGP SIGNATURE-----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=ZaDF
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that have
been removed, and Wasin Thonkaew has a cosmetic change"
* tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/error-injection.h: fix a spelling mistake, and a coding style issue
arch: Remove leftovers from prism54 wireless driver
arch: Remove leftovers from mandatory file locking
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
Documentation, arch: Remove leftovers from raw device
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9iKYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Giwf+OjKD1fwYzsSRFVyY5m+Vn1iZANCi
sXb5mVQks435oeBV44O5AEsaTLb+qQEyFQZBL6IdbIlPm+LwHu2GYTn2F84bilww
vO7mVbIpeh7bInD3eELWdrE6BdhcsenlLi3Tg0oeMQ7HAk4FT7GzcWk2laVemOnU
RoWjTn0S97Bh4aWfGEg22c+wfh1Egp6rLmHxaXCUJDrCexyA4CLZ6+r/ZgFUlb2q
FbdmPyjPnasiyM1RsY+hWY6dELl8xJwNg8hCA1DBddDsDLj8gMYXvZmR3oYHOG/1
/6Z4y6gbJ7NK9h4xPvjJ/XCdlXaEpZAIwr3OB+aEpCIXHNTaTzQL3v240A==
=BPLr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rJsW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
* tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Link: https://lore.kernel.org/r/20211218071427.26745-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Sama7: addition of QSPI SPI-NOR and the QSPI controller for this
product
- Addition of the crypto algorithms that are fallbacks for HW engines
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYbzBawAKCRAfOrpwrNPN
DJRsAP4qZurUWikvcozb3XDHbzrjGZK/g5m6r/LydWtf0YMqMAEA291YZ7lV6O96
9wSdR1pyuzfY8yoS7vT0bANcH4mTqwM=
=cxlf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hIav
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig #1 for 5.17:
- Sama7: addition of QSPI SPI-NOR and the QSPI controller for this
product
- Addition of the crypto algorithms that are fallbacks for HW engines
* tag 'at91-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: Enable crypto software implementations
ARM: configs: at91: sama7: Enable SPI NOR and QSPI controller
Link: https://lore.kernel.org/r/20211217165850.29694-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These patches enable various drivers used by new and existing boards in
both the Tegra default configuration and the multi-v7 configuration.
-----BEGIN PGP SIGNATURE-----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=199F
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xFt5
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.17-rc1
These patches enable various drivers used by new and existing boards in
both the Tegra default configuration and the multi-v7 configuration.
* tag 'tegra-for-5.17-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: config: multi v7: Enable display drivers used by Tegra devices
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
Link: https://lore.kernel.org/r/20211217162253.1801077-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable at least the same amount of algs as the hardware IPs are
supporting so that they are able to fallback to the software
implementations in case they need it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211215134311.304427-1-tudor.ambarus@microchip.com
sama7g5ek comes with a SPI NOR flash connected to the QSPI
controller. Enable the SPI NOR subsystem and the QSPI controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211209153744.357465-2-tudor.ambarus@microchip.com
This config was removed so remove all references to it.
Fixes: 76a3c92ec9 ("cifs: remove support for NTLM and weaker authentication algorithms")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Raw device interface was removed so remove all references to configs
related to it.
Fixes: 603e4922f1 ("remove the raw driver")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All Tegra20/30/114 serial and audio drivers depend on the Tegra20 APB DMA
driver, enable this DMA driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra20 S/PDIF driver that is a part of HDMI audio subsystem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All imx6 DHCOM devices uses a on module gold cap/battery powered i2c rtc
"microcrystal,rv3029", which isn't enabled in the imx_v6_v7_defconfig.
The rtc for all imx6 DHCOM devices is defined in: imx6qdl-dhcom-som.dtsi
To have a working clock on all imx6qdl DHCOM based devices, enable the driver.
Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable charger, touchpad and EC drivers found on Acer Tegra124 (Nyan)
Chromebooks, display bridge found on ASUS TF700T and audio codecs
found on ASUS tablets.
Suggested-by: Thomas Graichen <thomas.graichen@gmail.com> # Nyan options
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This enables the SL3516 crypto driver on the Gemini platforms
where it is available, by default in the defconfig. Clean
up some noise around the crypto options while we're at it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20211206011158.4180141-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DragonBoard 410c is mainly supported by the ARM64 architecture
and defconfig, but it can also run well on the ARM32 architecture.
Add the necessary options to the multi_v7_defconfig to simplify
building an ARM32 kernel for DragonBoard 410c.
This is also a possible opportunity to slightly increase CI coverage
for older Qualcomm-based ARM32 platforms that are currently not
represented well in automated CI setups. The APQ8016 SoC used in DB410c
is still quite similar to those. DB410c is already used in some CI systems
so the same hardware could be re-used to get some basic ARM32 boot testing.
When deciding between built-in (y) and module (m), I usually used the
same that is already being used (and functional) in the ARM64 defconfig.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Add options that are enabled in the common OpenBMC kernel
- Re-enable DRM_FBDEV_EMULATION
- Turn on the various sensor drivers that are used in BMC systems,
so we can boot test where they are modelled in Qemu
-----BEGIN PGP SIGNATURE-----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=PGcn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=D/YI
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.16-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/defconfigs
ASPEED defconfig updates for 5.16
- Add options that are enabled in the common OpenBMC kernel
- Re-enable DRM_FBDEV_EMULATION
- Turn on the various sensor drivers that are used in BMC systems,
so we can boot test where they are modelled in Qemu
* tag 'aspeed-5.16-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: configs: aspeed: Remove unused USB gadget devices
ARM: config: aspeed: Enable Network Block Device
ARM: configs: aspeed: Enable pstore and lockup detectors
ARM: configs: aspeed: Enable commonly used drivers
ARM: configs: aspeed: Disable IPV6 SIT device
ARM: configs: aspeed_g5: Reneable DRM_FBDEV_EMULATION
Link: https://lore.kernel.org/r/CACPK8Xd0mVn2Cy7d=VBTDMpU=WHrftsiihwH224ekFSDGKAbyA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq1uwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7GsAf+Ke0evf++bsvZnsdNW7UPQAtjnYgK
tNnQb97q5yz904u0tIRRjg2Qug+e2ohasxAUK2v0Jg58paYpVEmK7Kfa91BIds8F
Zw1rXAw3owyxt5VfWw5GT8TQEm/3MyMQvKJKdvTuSL+LEPcVIfXU88Us0oh9zSIj
SS2HFI6xmjCFI8JDgctGZcKBoTCJQlycI1lwdA7gpXXcJ4XJepxpzxtOobXKoDuv
KAJNSSGjY933y8HlImXFKol0KABlVB/ievV48PDvktQ3Rj526AG+ElB0m48YU7wQ
36hDX1Vmoun9L6QuICizklATNTwfT7O6fxEOpWJuFNja1orKzMXSyoatcA==
=DPy3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aROW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfigs
i.MX defconfig update for 5.16:
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
* tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable HID I2C
ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf
ARM: imx_v6_v7_defconfig: build imx sdma driver as module
ARM: imx_v6_v7_defconfig: rebuild default configuration
ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
ARM: imx_v6_v7_defconfig: enable mtd physmap
Link: https://lore.kernel.org/r/20211016140138.1603-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
The HID and mass storage gadget devices are used for the OpenBMC Web
UI's remote keyboard/mouse feature. The others are not required, so
disable them.
Signed-off-by: Joel Stanley <joel@jms.id.au>
No one is using this device on OpenBMC systems, and there is no code to
manage it in phosphor-networkd (the default OpenBMC userspace) as of
March 2021:
> [...] if you don't add IPv6 addresses to the sit interface
> it doesn't do anything. The defacto way to do that on an interface in
> OpenBMC is to have it managed by phosphor-networkd. On top of this, to
> support sit you would need a way to configure the local / remote IPv4
> addresses used to back it.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable HID I2C in the imx defconfig as it is used for a HID compliant
wacom device on the reMarkable2 tablet.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make mvebu_v7_defconfig; make savedefconfig" to rebuild
mvebu_v7_defconfig
This re-ordered the following configuration options:
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PCI=y
CONFIG_PCI_MVEBU=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
And dropped the following nowadays obsolete configuration options:
CONFIG_ZBOOT_ROM_TEXT=0x0 (default now anyway since commit 39c3e30456
("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"))
CONFIG_ZBOOT_ROM_BSS=0x0 (ditto)
CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable CONFIG_MTD_PHYSMAP which is nowadays required for
CONFIG_MTD_PHYSMAP_OF.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFMHfQUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7QUwf/dO+FrGSWlVxHeG/oKMb6iQqZs0zb
40F68OYCF+ucGJlwAkErnLcqxtC7rD8NHsGvxnXMbTNlhtjl5USw0tIki+3cw1EP
LggbTjlOCRDLnF2YmWfXN+hLz5On38TG9TvvWt8x2CBO9WXgipaG8JHCCsxdXZus
vk37hZSAlwqmkXHHDApBMsMTqma8ZlDRELrgnXeHL53pYFDxKWoOhL0WHvvZ+kFO
I3lnIB4FdAOgm+EoAAW2s6v/IJobhC19KoKBrtf3FRo6KQk5A6L8T2CFPMkL0cFf
zJboFIOmwMnw00O44RWKDPWDQKKMZYJubj+zHaAnUFRfg4D9KKSDQApffA==
=oDbx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=giT+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15:
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
* tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable fb
ARM: dts: imx6qdl-pico: Fix Ethernet support
ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"
ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
Link: https://lore.kernel.org/r/20210923063356.GK13480@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF to allow for systemd
interoperability. This avoids the following failure on boot:
[ 10.615914] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build CONFIG_IMX_SDMA as a module to avoid the following boot issue:
[ 5.214751] imx-sdma 20ec000.sdma: Direct firmware load for
imx/sdma/sdma-imx6q.bin failed with error -2
[ 5.215762] imx-sdma 20ec000.sdma: Falling back to sysfs fallback
for: imx/sdma/sdma-imx6q.bin
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make imx_v6_v7_defconfig; make savedefconfig" to rebuild
imx_v6_v7_defconfig.
This dropped the following nowadays obsolete configuration options:
CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
CONFIG_CS89x0=y (selected by CS89x0_PLATFORM)
CONFIG_SMSC_PHY=y (selected by USB_NET_SMSC95XX)
CONFIG_GPIO_MC9S08DZ60=y (depends on MACH_MX35_3DS)
CONFIG_REGULATOR=y (selected by various stuff)
CONFIG_MEDIA_CAMERA_SUPPORT=y (defaults to on if MEDIA_CAMERA)
CONFIG_MEDIA_CONTROLLER=y (selected by various stuff)
CONFIG_VIDEO_V4L2_SUBDEV_API=y (selected by various stuff)
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_FSL_USB2=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change CONFIG_SND_SOC_TLV320AIC3X to CONFIG_SND_SOC_TLV320AIC3X_I2C.
I did double check all current mainline device trees and they are all
using the I2C rather than the SPI variant.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we will split the PANEL_SIMPLE driver in two. By
default let's give everyone who had the old driver enabled the new
driver too. If folks want to opt-out of one or the other they always
can later.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
These options have moved around when generating the defconfig. Update
them to reduce noise when generating future changes.
The exceptions are:
- NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected
by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED
doesn't force-enable the subsystem.
- The SPI_AX88796C network device. This was enabled in v5.11 for Exynos
boards. The driver is not yet merged but there's work being done, so
leave it alone for now.
- PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E
and FEC, but this may be changed in the future as imply does not do
what it was originally intended to do.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
These options were renamed in recent times. Add the new name so the
driver is built again, and drop the old name.
POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d620 ("PM: AVS:
smartreflex Move driver to soc specific drivers"). Add the new symbol.
QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8e ("cpuidle: Convert
Qualcomm SPM driver to a generic CPUidle driver").
SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba7 ("ASoC:
mmp-sspa: Add Device Tree support"). Enable that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
A number of options in the defconfig are enabled by other options;
either through selects or defaults.
SECCOMP is on by default as of commit 282a181b1a ("seccomp: Move config
option SECCOMP to arch/Kconfig").
NET_SWITCHDEV is enabled by NET_DSA. I think this is a result of commit
227d72063f ("dsa: simplify Kconfig symbols and dependencies").
SIMPLE_PM_BUS is selected ARCH_OMAP2PLUS as of commit 2a39af3870 ("ARM:
OMAP2+: Fix booting for am335x after moving to simple-pm-bus").
MICREL_PHY is selected by the ks8851 ethernet driver as of f0791b92d2 ("net:
ks8851: Select PHYLIB and MICREL_PHY in Kconfig").
SMSC_PHY is selected by USB_NET_SMSC95XX as of commit 05b35e7eb9 ("smsc95xx:
add phylib support").
STMPE_I2C is default y. It was explicitly added to the defconfig in commit
d8f0ddc838 ("ARM: defconfig: add STMPE ADC driver for P4 Note") but it's not
required.
CLK_ACTIONS and CLK_OWL_S500 was explicitly added in commit 26ba4a474a ("ARM:
multi_v7_defconfig: Enable Actions Semi platform and drivers"), but it defaults
on when ARCH_ACTIONS is enabled. Drop them.
CROS_EC_CHARDEV defaults to MFD_CROS_EC_DEV, which defaults to CROS_EC since
commit 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name").
TEGRA20_APB_DMA is selected by SOC_TEGRA_FUSE if ARCH_TEGRA_2x_SOC since commit
19d41e5e9c ("soc/tegra: fuse: Add APB DMA dependency for Tegra20").
USB_CHIPIDEA_TEGRA is enabled when USB_CHIPIDEA is enabled. It falls out
of the defconfig but is enabled, as intended by d50229cee6 ("ARM:
multi_v7_defconfig: Stop using deprecated USB_EHCI_TEGRA").
SERIAL_OWL_CONSOLE defaults to on when SERIAL_OWL=y, and has since it
was introduced.
Commit c6774ee035 ("media: Kconfig: make filtering devices optional")
made MEDIA_PLATFORM_SUPPORT, MEDIA_CAMERA_SUPPORT and MEDIA_CEC_SUPPORT
default y if MEDIA_SUPPORT_FILTER is disabled, so they fall out of the
defconfig.
MEDIA_CONTROLLER is selected by a number of drivers in the config, and
additionally defaults to MEDIA_PLATFORM_SUPPORT which is enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-3-joel@jms.id.au
SIRF was removed in commit f3a732843a ("ARM: remove sirf prima2/atlas
platforms"). This covers ARCH_SIRF, SERIAL_SIRFSOC, SERIAL_SIRFSOC_CONSOLE,
I2C_SIRF, SPI_SIRF.
EVI_VARS was made x86 only in commit 963fabf37f ("efi: efivars: limit
availability to X86 builds").
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-2-joel@jms.id.au
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and
VIDEO_VIVID.
It must be set to y and not a module as the test driver VIDEO_VIVID
requires it to be built in.
Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some drivers have not been built as they gained dependencies in kconfig but those
dependencies were not added to the defconfig.
The MSM pinctrl drivers fell out of the defconfig as of commit be117ca322
("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
selected config"). Add PINCTRL_MSM so these stay enabled.
EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling
DRM_FBDEV_EMULATION for configurations that had it enabled.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
This CONFIG option was removed in commit 278b13ce3a ("Input: remove
input_polled_dev implementation") so there's no point to keep it in
defconfigs any longer.
Get rid of the leftover for all arches.
Link: https://lkml.kernel.org/r/20210726074741.1062-1-yuzenghui@huawei.com
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The usual set of defconfig updates, including one new defconfig file
for the new sama7 family of SoCs.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhL9tt5t5GS2LDRf4RAmYSAKCO54nhlHsmi+MwS+shKFZoeWsgNQCgpCZF
vtNPWQt8uTY8606ZgLOj4hA=
=xoLh
-----END PGP SIGNATURE-----
Merge tag 'defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, including one new defconfig file
for the new sama7 family of SoCs"
* tag 'defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: config: aspeed: Regenerate defconfigs
ARM: config: aspeed_g4: Enable EDAC and SPGIO
ARM: config: aspeed: Enable KCS adapter for raw SerIO
ARM: config: aspeed: Enable hardened allocator feature
ARM: imx_v6_v7_defconfig: enable driver of the LTC3676 PMIC
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
ARM: configs: multi_v7: enable PL35x NAND controller
arm64: defconfig: Enable Qualcomm MSM8996 CPU clock driver
ARM: imx_v6_v7_defconfig: Let CONFIG_SCSI_LOWLEVEL be selected
ARM: imx_v6_v7_defconfig: Select CONFIG_KPROBES
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a new
cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5 based)
SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhL0Bu5t5GS2LDRf4RAtYAAJ9qcN3tF8tHPPBUknXjvQVN7ESntwCfQtPu
XOVR6q993d7EZh3ATYuXVtE=
=igP/
-----END PGP SIGNATURE-----
Merge tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
A make defconfig && make savedefconfig was performed for each
configuration.
Most changes are due to options moving around, except for the following
which are due to changing defaults:
- SECCOMP is enabled by default as of commit 282a181b1a ("seccomp:
Move config option SECCOMP to arch/Kconfig") in v5.9
- The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL
are enabled by default when the aspeed platform is enabled, as of
commit 592693a1f8 ("soc: aspeed: Improve kconfig") in v5.9
- The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of
commit 39c3e30456 ("ARM: 8984/1: Kconfig: set default
ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8
- I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about
v5.8. It was in the config as it is required bt the PCA I2C muxes
that enabled it
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
These two devices are part of the AST2400 and the drivers have support
for that version of the soc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-4-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Raw SerIO is used by the OpenBMC debug-trigger application to take
signals from the host that applications are unresponsive on the BMC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
SLAB_FREELIST_HARDENED can protect from freelist overwrite attacks with
really small overhead.
It works best with the SLUB allocator, so make SLUB the default by
removing SLAB=y.
total used free shared buff/cache available
SLAB 425596 44065.3+/-220 311099+/-3800 14864+/-3900 70432+/-3700 352767+/-3900
SLUB 425592 44225.3+/-280 313275+/-600 12132+/-3.3 68092+/-530 355295+/-280
These figures are the average memory usage from three boots of each
option in qemu, running the Romulus userspace. The output is from
free(1), reported in kilobytes.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enables a couple of drivers by default so that the configuration is
useful on more devices. This also rebuilds the tegra_defconfig, which
hasn't been done in a long time.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmEWmMYTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zofphD/9Bd+jpcKWXMPWyJ4qI6BWGjSkg9nB3
F64t49Mjst8D0/8tPzMrb12igjbuleYKi/rYi93RWeVstd6D7LCcGjboODhM/zVy
2mokZ3xyNyNYW+J0BcR5Ld4hyU4OuUAiEb97k3ppJBo+3FdQ0lPDWstOjmehDaga
JcDifiqNAUp+YoAcVjT+6C+f1BL2DVKiK/yFoISf+PiblH3GCORj6K9Z78KedR5o
qPfv/NCEstZICoWzO5/Lnuv9NY/9p6GoKVy+BHtOUVIm6qELTF42RCEMs9JnxXTb
uRZaaWa7E0rk7zJg/ISaGh/GXzpP4AM50fcYeenjYdFXQ4D4NSVQ1c+CgI/l50ez
hHbv9bbJYBZbgXx2clJl3pADKnmCTK7rAEo28mnp/UiOWSnnPbQwm6HGz9dS8Gwl
dniHGVgh6ahQmTixHd+AmECXRr3KSsWElbSPYcHXlrfOUNCXWT6766buSETehqRd
062C+mnPDsu1sg9qsrOfxh74bWyy8GcLtKg3r+EFv2LAONfO4gwvL/oDxyOisL0N
MT5dLhSx43suI9wjyjG0QidefEi2yHRnrzmMRvdAoqThq5yCXhf9bbo9UWnhl25p
Y19OLgjkHjfmciNiIuUZK/+7VQcdkUWtcQ0YcYbxGE4PLwMJhIvnJyVnsHQ50D+b
DVxIDvGS+U3Piw==
=fhSk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uSNh
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.15-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.15-rc1
Enables a couple of drivers by default so that the configuration is
useful on more devices. This also rebuilds the tegra_defconfig, which
hasn't been done in a long time.
* tag 'tegra-for-5.15-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
Link: https://lore.kernel.org/r/20210813162157.2820913-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The LTC3676 is a PMIC which is used on some i.MX6 based boards (like the
DHCOM i.MX6 Quad SoM), it was first used on the GW Ventana board, enable
LTC3676 driver in imx_v6_v7_defconfig.
Signed-off-by: Pascal Zimmermann <pzimmermann@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Marek Vasut <marex@denx.de>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de> # On DH iMX6Q DHCOM PDK2
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
Also fix up some Kconfig options that got dropped or moved around
while we're at it.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210807225518.3607126-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYREvjgAKCRAfOrpwrNPN
DBc1AP4/HkSrWp57ElCSIwIY2vCZrOEbeRROxOgO5j/mdoB4qwEArsEEnZGHwpO3
TYjdyGt4yLR9kmaYBmWnDfI8loz0HQw=
=sVC8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEVjV8ACgkQmmx57+YA
GNkWJw/8Dx4/DlgH+mKyGTYbZ1ItS5wOtx0NV/FsvLAKrfLJIjeqG0caJ3gs2Aom
kL8VhjYWXy3M0aZpPu01ruyPMB2pWKfV/ozNITONP//bBCE3hr+WU7+D37XAy2Vr
V3itZCKHNnNlxR5sbOYZULN/1/lhHB2S5o83RaXsLQCX5n+7vTa63LhegmphFCAd
FnTORSbeMXAwyg80nTE1T1PxreUxK/YCukLe5qFIjLiU0RcPR7MZJOQNAhbKi5cz
o2vFQg+c6ajwKwP0ifxFIctCs0BmAzntioS4MLvyitiU0dRIGQTl85MK9JfEIexh
x+oYE8Ir1+UY7FmBR+GdpnT6x4Bj5EqVlXPU6E3sqVu+G5DSbSRKvjd53m+tLYDc
aSk5XoYnaoZtr3mKGrZmC/kyMLTPKkeKenwa8qQ3VFVB/HYXCp8NTF8N44XbtwVu
Leo+8I5/XS1Jwh5IBcWFTqWC8ZIbJTDy+dPabUcBZb4z2GAuIZx4PIidsEV1BkMp
F2jMpTjPqLVzLTcy+mo/ndMWC0MHeMaxy1tj4eLvPFcSJ9gE2CkSem6iUTizfptc
1mB5pb07J+8Vx0h7iZqqLm/87LBKxGWTrUMZOuSRM2Tuv72pydY50qAolb3QtXuo
4a67RKX4EQmHqrxleN18blIlACqrkZ/C2yW1KXNknQ9iaNOAETY=
=g9Op
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.15:
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
* tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
Link: https://lore.kernel.org/r/20210809134521.10155-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updating the tegra_defconfig was omitted, when the ChromeOS EC config
options were renamed by a previous commit. Fix it.
Fixes: 67c70aa86f ("arm/arm64: defconfig: Update configs to use the new CROS_EC options")
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously CONFIG_FB was auto-selected, now it's not. We completely lost
framebuffer in tegra_defconfig. Select the CONFIG_FB to fix it.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After years, linux finally got a driver for the PL35x NAND controller
found on the Xilinx Zynq-7000 SoC for example. Enable support for this
driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210616155437.27378-2-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The MaverickCrunch support for ep93xx never made it into glibc and
was removed from gcc in its 4.8 release in 2012. It is now one of
the last parts of arch/arm/ that fails to build with the clang
integrated assembler, which is unlikely to ever want to support it.
The two alternatives are to force the use of binutils/gas when
building the crunch support, or to remove it entirely.
According to Hartley Sweeten:
"Martin Guy did a lot of work trying to get the maverick crunch working
but I was never able to successfully use it for anything. It "kind"
of works but depending on the EP93xx silicon revision there are still
a number of hardware bugs that either give imprecise or garbage results.
I have no problem with removing the kernel support for the maverick
crunch."
Unless someone else comes up with a good reason to keep it around,
remove it now. This touches mostly the ep93xx platform, but removes
a bit of code from ARM common ptrace and signal frame handling as well.
If there are remaining users of MaverickCrunch, they can use LTS
kernels for at least another five years before kernel support ends.
Link: https://lore.kernel.org/linux-arm-kernel/20210802141245.1146772-1-arnd@kernel.org/
Link: https://lore.kernel.org/linux-arm-kernel/20210226164345.3889993-1-arnd@kernel.org/
Link: https://github.com/ClangBuiltLinux/linux/issues/1272
Link: https://gcc.gnu.org/legacy-ml/gcc/2008-03/msg01063.html
Cc: "Martin Guy" <martinwguy@martinwguy@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When using Yocto's Ptest DISTRO_FEATURE the CONFIG_SCSI_DEBUG=m option
is added, but it cannot be selected as it depends on CONFIG_SCSI_LOWLEVEL.
This generates a build warning saying that the CONFIG_SCSI_DEBUG=m option
is discarded.
Fix this by letting CONFIG_SCSI_LOWLEVEL to be selected.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_MMC_MESON_MX_SDHC so that SDHC host controller
on Amlogic SoCs boards enable support for eMMC and MMC drivers.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210715092233.1084-1-linux.amoon@gmail.com
Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig.
Also add it's clock timer, the PIT64B.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: phone-devel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: newbyte@disroot.org
Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the Versatile defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- The Acorn fonts are removed, the default framebuffer font
works fine. I don't know why this was selected in the first
place or how the Kconfig was altered so it was removed.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the RealView defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- Drop two unused penguin logos.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714090040.182381-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the Integrator defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- Drop the unused Matrox FB drivers that are only used with
specific PCI cards.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As of commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB"), CONFIG_FB is no longer auto-enabled. While CONFIG_FB may
be considered unneeded for systems where graphics is provided by a DRM
driver, R-Mobile A1 still relies on a frame buffer device driver for
graphics support.
Restore support for graphics on R-Mobile A1 and graphical consoles on
DRM-based systems by explicitly enabling CONFIG_FB in the defconfig for
Renesas ARM systems.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4474be1d2c00c6ca97c2714844ea416a9ea9a9.1626084948.git.geert+renesas@glider.be
A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out. These changes are
almost exclusively turning on new drivers for various platforms, or
turning on modules for new drivers for the shared generic configs.
-----BEGIN PGP SIGNATURE-----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=8yuO
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
pxa_defconfig already enables libata including the pata_pcmcia driver, so
drop the legacy ide driver and idecs host driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
footbridge_defconfig enables CONFIG_IDE but no actual host controller
driver, so just drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enables the devfreq thermal support to allow using the devfreq device as
cooling device for the system.
-----BEGIN PGP SIGNATURE-----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=llL+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.14-rc1
Enables the devfreq thermal support to allow using the devfreq device as
cooling device for the system.
* tag 'tegra-for-5.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
Link: https://lore.kernel.org/r/20210611164437.3568059-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add the use of tickless and HR times to ARM9 defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYMNdFwAKCRAfOrpwrNPN
DAAVAQD7rFjVG40z+r1Xil7a8Han/1t+xoSf+NDgrNGYCHswUwD/Z7YyRnsGwuR8
DR64Sw6XjT5sIh9Q24Txda1C/NnQ2Qk=
=OMYy
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.14:
- Add the use of tickless and HR times to ARM9 defconfig
* tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91_dt_defconfig: configs for sam9x60
Link: https://lore.kernel.org/r/20210611125659.25590-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Defconfig changes for omap2plus_defconfig to add WL1251
and LP5523 as loadable modules for n900.
-----BEGIN PGP SIGNATURE-----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=bKhk
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.14 merge window
Defconfig changes for omap2plus_defconfig to add WL1251
and LP5523 as loadable modules for n900.
* tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
- Refresh shmobile_defconfig for v5.13-rc1
- Enable R-Car USB2 clock selector support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLChcAAKCRCKwlD9ZEnx
cH0xAQDKjUogB7W9c/K9I5+zNyqAtWvf3aqfrlBV0wnOvPk4jgD/Siph1MbVJacv
VQFV8LS4Ip7+RKJ1cPexHvVIW5DAxwg=
=+ks9
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.14
- Refresh shmobile_defconfig for v5.13-rc1
- Enable R-Car USB2 clock selector support
* tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
ARM: shmobile: defconfig: Refresh for v5.13-rc1
Link: https://lore.kernel.org/r/cover.1622188834.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Select the ath10k sdio driver so that Wifi can work by default on
boards like imx6dl-pico-pi with a QCA9377 chip.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
changed the Kconfig dependencies, so COFNIG_FB is no longer selected in
defconfigs. Restore support for it in exynos_defconfig, because most
Exynos platforms had graphical console running on framebuffer device
emulated on the Exynos DRM drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210611100204.6240-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Enable CONFIG_NO_HZ_IDLE and CONFIG_HIGH_RES_TIMERS=y to be used
in conjunction with PIT64B present on SAM9X60.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210406141152.10706-1-claudiu.beznea@microchip.com
Memory-related Tegra devfreq devices now could be used as a cooling
devices. Enable CONFIG_DEVFREQ_THERMAL by default since this option
enables cooling functionality of the devfreq drivers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Nokia N900 has an LP5523 driving the RGB LED and the 6 keyboard LEDS.
Enable support for it in omap2plus_defconfig.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Nokia N900 uses a TI WL1251 chip for WiFi. Enable support for it
as a loadable module.
In order to be usable and connect to networks, it needs wireless
extensions, so enable WEXT support in the kernel.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Patch series "drivers/char: remove /dev/kmem for good".
Exploring /dev/kmem and /dev/mem in the context of memory hot(un)plug and
memory ballooning, I started questioning the existence of /dev/kmem.
Comparing it with the /proc/kcore implementation, it does not seem to be
able to deal with things like
a) Pages unmapped from the direct mapping (e.g., to be used by secretmem)
-> kern_addr_valid(). virt_addr_valid() is not sufficient.
b) Special cases like gart aperture memory that is not to be touched
-> mem_pfn_is_ram()
Unless I am missing something, it's at least broken in some cases and might
fault/crash the machine.
Looks like its existence has been questioned before in 2005 and 2010 [1],
after ~11 additional years, it might make sense to revive the discussion.
CONFIG_DEVKMEM is only enabled in a single defconfig (on purpose or by
mistake?). All distributions disable it: in Ubuntu it has been disabled
for more than 10 years, in Debian since 2.6.31, in Fedora at least
starting with FC3, in RHEL starting with RHEL4, in SUSE starting from
15sp2, and OpenSUSE has it disabled as well.
1) /dev/kmem was popular for rootkits [2] before it got disabled
basically everywhere. Ubuntu documents [3] "There is no modern user of
/dev/kmem any more beyond attackers using it to load kernel rootkits.".
RHEL documents in a BZ [5] "it served no practical purpose other than to
serve as a potential security problem or to enable binary module drivers
to access structures/functions they shouldn't be touching"
2) /proc/kcore is a decent interface to have a controlled way to read
kernel memory for debugging puposes. (will need some extensions to
deal with memory offlining/unplug, memory ballooning, and poisoned
pages, though)
3) It might be useful for corner case debugging [1]. KDB/KGDB might be a
better fit, especially, to write random memory; harder to shoot
yourself into the foot.
4) "Kernel Memory Editor" [4] hasn't seen any updates since 2000 and seems
to be incompatible with 64bit [1]. For educational purposes,
/proc/kcore might be used to monitor value updates -- or older
kernels can be used.
5) It's broken on arm64, and therefore, completely disabled there.
Looks like it's essentially unused and has been replaced by better
suited interfaces for individual tasks (/proc/kcore, KDB/KGDB). Let's
just remove it.
[1] https://lwn.net/Articles/147901/
[2] https://www.linuxjournal.com/article/10505
[3] https://wiki.ubuntu.com/Security/Features#A.2Fdev.2Fkmem_disabled
[4] https://sourceforge.net/projects/kme/
[5] https://bugzilla.redhat.com/show_bug.cgi?id=154796
Link: https://lkml.kernel.org/r/20210324102351.6932-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210324102351.6932-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: James Troup <james.troup@canonical.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <kasong@redhat.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: openrisc@lists.librecores.org
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Pavel Machek (CIP)" <pavel@denx.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: sparclinux@vger.kernel.org
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Theodore Dubois <tblodt@icloud.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the personal server platform, as that has had an array overrun
issue identified. It is believed that no one is using this code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The Nuvoton WPCM450 BMC is an older chip based on the ARM926 CPU core
that remains in use on Supermicro X9 server boards among others. Support
gets added for a particular server board using this SoC along with the
basic platform bringup.
As the platform is a predecessor to the npcm7xx platform we already
support, it is added to the same directory, despite using a different
name. It also seems to be related to the older w90x900/nuc9xx platform
that was removed last year.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=8lh7
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Nuvoton WPCM450 platform support from Arnd Bergmann:
"The Nuvoton WPCM450 BMC is an older chip based on the ARM926 CPU core
that remains in use on Supermicro X9 server boards among others.
Support gets added for a particular server board using this SoC along
with the basic platform bringup.
As the platform is a predecessor to the npcm7xx platform we already
support, it is added to the same directory, despite using a different
name. It also seems to be related to the older w90x900/nuc9xx platform
that was removed last year"
* tag 'arm-newsoc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: config: Add WPCM to multi v5
MAINTAINERS: Add entry for Nuvoton WPCM450
ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450
ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chip
watchdog: npcm: Add support for WPCM450
ARM: npcm: Introduce Nuvoton WPCM450 SoC
dt-bindings: watchdog: npcm: Add nuvoton,wpcm450-wdt
dt-bindings: arm: npcm: Add nuvoton,wpcm450 compatible string
dt-bindings: vendor-prefixes: Add Supermicro
ARM: dts: Add board-specific compatible string to npcm750-evb devicetree
dt-bindings: arm: Convert nuvoton,npcm750 binding to YAML
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=SauY
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig"
* tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER
ARM: configs: ux500: Update for new drivers
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
ARM: configs: at91: Modernize UBI defconfig part
ARM: configs: at91: Add USB Video webcam class
ARM: configs: at91: Add mtd tests as modules
ARM: configs: at91: sama5: Add audio MIKROE PROTO board
ARM: configs: at91: sama5: Enable LAN78XX as module
ARM: configs: at91: sama5: PIOBU as built-in
ARM: configs: at91: sama5: MCP16502 regulator as built-in
ARM: configs: at91: sama5: enable the Hantro G1 engine
ARM: configs: at91: sama5: update with savedefconfig
...
This enables all the hardware support currently available for the
Qualcomm SDX55 platform in the qcom_defconfig. Due to (current) size
limitations these changes are not done in the multi-platform config.
-----BEGIN PGP SIGNATURE-----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=9z1j
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for 5.13
This enables all the hardware support currently available for the
Qualcomm SDX55 platform in the qcom_defconfig. Due to (current) size
limitations these changes are not done in the multi-platform config.
* tag 'qcom-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
Link: https://lore.kernel.org/r/20210419152143.861934-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Not all platforms are able to allocate CMA size of 256MB. One such
platform is SDX55. Hence, use the standard 64MB size for CMA.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable CPUFreq and CPUFreq DT drivers to carry out CPU Frequency scaling
duties on platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable Qualcomm APCS IPC mailbox driver for IPC communication between
application processor and other masters in platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Update defconfig to have nefilter available as loadable modules
to make the defconfig more usable for networked devices. And we now
select SIMPLE_PM_BUS so it can be dropped. And some devices use
EEPROM_AT25 so let's add it as a loadable module.
-----BEGIN PGP SIGNATURE-----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=INyD
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.13
Update defconfig to have nefilter available as loadable modules
to make the defconfig more usable for networked devices. And we now
select SIMPLE_PM_BUS so it can be dropped. And some devices use
EEPROM_AT25 so let's add it as a loadable module.
* tag 'omap-for-v5.13/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add AT25 EEPROM module
ARM: omap2plus_defconfig: Enable Netfilter components as modules
ARM: omap2plus_defconfig: Update for dropped simple-pm-bus
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- aligment with recent kernel for sama5_defconfig
- move of 2 options to built-in
- addition of useful modules for validation and CI
- addition of Hantro G1 VPU from staging
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYGXyKwAKCRAfOrpwrNPN
DJsqAP4sStd3bgGL9s7rXAZXQa234njBqssvaJnh64PM3clWvgEApWU3hsWdlFeH
C2ArzJOXtk3fz0ttpzq9AvYZNBdZwA4=
=Ix2s
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.13:
- aligment with recent kernel for sama5_defconfig
- move of 2 options to built-in
- addition of useful modules for validation and CI
- addition of Hantro G1 VPU from staging
* tag 'at91-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: Modernize UBI defconfig part
ARM: configs: at91: Add USB Video webcam class
ARM: configs: at91: Add mtd tests as modules
ARM: configs: at91: sama5: Add audio MIKROE PROTO board
ARM: configs: at91: sama5: Enable LAN78XX as module
ARM: configs: at91: sama5: PIOBU as built-in
ARM: configs: at91: sama5: MCP16502 regulator as built-in
ARM: configs: at91: sama5: enable the Hantro G1 engine
ARM: configs: at91: sama5: update with savedefconfig
Link: https://lore.kernel.org/r/20210401162207.29299-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The userspace consumer is a development tool, not intended for producton
systems and so should not be present in defconfigs especially not those
for specific machines so is not a good fit for defconfig, remove it from
those defconfigs where it is enabled. No system in mainline actually
instantiates one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20210401102858.4095-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some new driver support for the Ux500 devices landed in
v5.12-rc1 so update the defconfig to use them:
- TM2 touchkey, used on the Golden and Janice.
- SPI GPIO, used for the Janice display control.
- NTC thermistor, used for the HREF temperature
sensors.
- V4L2 flash control that gives support for LED
torch to userspaces such as Phosh.
- The LEDs Flash class and RT8515 Flash/torch LED
driver used in all the Samsung mobiles.
- FSA9480 extcon, used by Janice.
- BMC150 accelerometer, used by Janice.
- IIO rescaler, used for thermistors and ALS
on Janice.
- MPU3050 gyroscope driver used by Janice.
- Yamaha YAS530 magnetometer driver used by Janice.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UBI_GLUEBI is not so common and UBI_FASTMAP is used for several years.
Make them part of a modernization of UBI defconfig options.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add this board as a module as it's useful for testing audio on multiple
AT91 boards.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
[nicolas.ferre@microchip.com: adap to newer kernel]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Include this driver as the USB-Ethernet chip is present on SAMA5D2-ICP
board.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
[nicolas.ferre@microchip.com: update commit subject and message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Include as built-in as it's used by multiple boards.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
[nicolas.ferre@microchip.com: adap to newer kernel]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
This regulator is needed by several SoC or external peripherals on
different boards, providing required power rails. Make it built-in
to match usual use-cases.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
The SoC features a Hantro G1 compatible engine. Enable it by default, so
people can make use of it.
Keep it a module, as suggested by Nicolas
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210311154055.3496076-11-emil.l.velikov@gmail.com
While enabling an extra config, I've noticed that savedefconfig produced
a notable delta. Split out the no-op changes for clarity sake.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
The Torpedo development kit has an at25 SPI EEPROM on the baseboard.
Enable it as a module in the omap2plus defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the majority of the Netfilter components as loadable modules
in the omap2plus_defconfig file.
Signed-off-by: Ivan Jelincic <parazyd@dyne.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: parazyd <parazyd@dyne.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only
one for both of them. After conversion of all
drivers to use the new ARCH_INTEL_SOCFPGA, the remaining ARM option can
be removed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The USB_EHCI_TEGRA option is deprecated now and replaced by
USB_CHIPIDEA_TEGRA. Replace USB_EHCI_TEGRA with USB_CHIPIDEA_TEGRA
in multi_v7_defconfig.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210320151915.7566-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
The "oprofile" user-space tools don't use the kernel OPROFILE support any more,
and haven't in a long time. User-space has been converted to the perf
interfaces.
The dcookies stuff is only used by the oprofile code. Now that oprofile's
support is getting removed from the kernel, there is no need for dcookies as
well.
Remove kernel's old oprofile and dcookies support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I2Ac
-----END PGP SIGNATURE-----
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
Here is the big set of USB and Thunderbolt driver changes for 5.12-rc1.
It's been an active set of development in these subsystems for the past
few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on some
of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqf5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZhQCgoDMMu9YZZI8chWVlIbDYiHxG520An1SlbwDb
hRh87fsQFkwWk06Bp9AQ
=LmS1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.12-rc1.
It's been an active set of development in these subsystems for the
past few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on
some of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
dt-bindings: usb: mediatek: musb: add mt8516 compatbile
dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
dt-bindings: usb: mtk-xhci: add optional assigned clock properties
Documentation: connector: Update the description of sink-vdos
usb: misc: usb3503: Fix logic in usb3503_init()
dt-bindings: usb: usb-device: fix typo in required properties
usb: Replace lkml.org links with lore
dt-bindings: usb: dwc3: add description for rk3328
dt-bindings: usb: convert rockchip,dwc3.txt to yaml
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
USB: quirks: sort quirk entries
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
usb: gadget: Assign boolean values to a bool variable
usb: typec: tcpm: Get Sink VDO from fwnode
dt-bindings: connector: Add SVDM VDO properties
usb: typec: displayport: Fill the negotiated SVDM Version in the header
usb: typec: ucsi: Determine common SVDM Version
usb: typec: tcpm: Determine common SVDM Version
...
As usual, a number of additional device drivers that were added
to the kernel are now enabled in the respective configuration
files. A few of the files get updated to match the current
Kconfig files for removed or renamed options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=9G1K
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use [1], and
received confirmation about six ARM platforms and the TI C6x architecture
that have all reached the end of their life upstream, with no known
users remaining:
- efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell -- added in 2011, abandoned after 2012 acquisition
- prima2 -- added in 20111, no notable changes since 2015
- tango -- added in 2015, sporadic changes until 2017, but abandoned
- u300 -- added in 2009, no notable changes since 2013
- zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x -- added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users
that plan to contribute them in the future, in other cases the code
is complete and works reliably.
[1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pf3b
-----END PGP SIGNATURE-----
Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
Update for moved and dropped options to make creating patches
against omap2plus_defconfig easier.
-----BEGIN PGP SIGNATURE-----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=I/ad
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.12 merge window
Update for moved and dropped options to make creating patches
against omap2plus_defconfig easier.
* tag 'omap-for-v5.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
Link: https://lore.kernel.org/r/pull-1612421637-483551@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
-----BEGIN PGP SIGNATURE-----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=GYHk
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.12, part 2:
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
* tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
Link: https://lore.kernel.org/r/20210208115753.54730-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Add Quad SPI driver to the sama5 defconfig. This driver is needed for
sama5d2 SoC.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Add OV7740 as a module as it's useful testing camera sensors on
sam9x60ek for instance. Unify with sama5_defconfig as well.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add GPIO, SPI and I2C options that were missing from the
at91_dt_defconfig whereas they were in sama5_defconfig. It unifies all
AT91 defconfigs with same set of useful options.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
As all AT91 platforms are converted to DT for a long time, adapt the
defconfigs by:
- removing legacy CONFIG_ATAGS as a DT will always be provided;
- removing the CONFIG_ARM_APPENDED_DTB option on SAMA5 devices as the
vast majority of systems will use a DT-aware bootloader on these
devices.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Kconfig options are not present anymore or selected by default: remove
them from sama5_defconfig.
No change to kernel compilation expected.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbowwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4U5gf+PPpo0Tc8ys0z85tMxh3Yzk7L9jMG
MXIsD4dWjWhZZJV6oWH4HYxuQjqvrYbcprdrdeip/q//S0ch8farB2yft5E2+4el
RhqSig5Y0uySgVg/lJWtDSI4x5E7m0IMJBMydBdV0d/S+lXOXagKNNS4HgB7HWX9
DCPct6Img1RGcAFWw2dAaDZr5WHvrL28bA72SFBaSVh33bXjwoccl+p4rwCdHB24
OTVLHlpiPKo5gO7WxtQnGQuyzDpNstoLPQCfbOyDa0rS+eAA7o/CqaaU2o2Zshw/
hzs/xJiX1sMrRQ0lO7Atl98vYF/oUFlWAeBcIj7TCSz90nLus0NuojUD1g==
=Nud0
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable PF8x00 as builtin
arm64: defconfig: Enable vibra-pwm
arm64: defconfig: Enable Broadcom BCM54140 PHY
arm64: defconfig: Enable interconnect for imx8mq
arm64: defconfig: Enable PCA9532 support
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable Librem 5 devkit components
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
arm64: defconfig: Enable WM8962
Link: https://lore.kernel.org/r/20210204120150.26186-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables various device drivers found on the newly introduced
Qualcomm SDX55 platform in the qcom_defconfig. Due to kernel image size
constraints the qcom_defconfig is used instead of multi_v7_defconfig,
for now.
-----BEGIN PGP SIGNATURE-----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=GS05
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for 5.12
This enables various device drivers found on the newly introduced
Qualcomm SDX55 platform in the qcom_defconfig. Due to kernel image size
constraints the qcom_defconfig is used instead of multi_v7_defconfig,
for now.
* tag 'qcom-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
ARM: qcom_defconfig: Enable watchdog driver
ARM: qcom_defconfig: Enable RPMh regulator
ARM: qcom_defconfig: Enable ARM SMMU
ARM: qcom_defconfig: Enable DWC3 controller and PHYs
ARM: qcom_defconfig: Enable UBI file system
ARM: qcom_defconfig: Enable MTD UBI driver
ARM: qcom_defconfig: Enable SMEM partition parser
ARM: qcom_defconfig: Enable SDX55 GCC driver
ARM: qcom_defconfig: Enable SDX55 pinctrl driver
ARM: qcom_defconfig: Enable RPMh drivers
Link: https://lore.kernel.org/r/20210204052236.388783-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- enable support for the ADC thermal sensor as module
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmAa9TMACgkQWTcYmtP7
xmUj8g/8Dzfh1VhfvqaLwh+EAGYoX6MNUjujItk+N0mBwu8MBCNjKXhdAE0Zh7WK
sG9vmxS6JCJ2zH9iIlmbAPG8g7jngTqPov/Y5cwgKzQDPWFFMO4o4FbdpinK3OLs
+11ipC0tim2m9EKcehhn34beD82xm7CB/N07FUjCGWOcNFO2+lGNkekh4lHi1omq
J8XQvlFvzqR95IWSOAbSeThM8dI/u5sCUDyu2R3cyf43UWU49+1QZ69h6Hef4vcw
/HyqS5bHBW9nly4U9Hg0DZKYLSKKmqmiOpYvEnqAs8shIG4kZ+wsK2cwJXa1gu8W
xysf3axZnGb1UF17v8bSnqwpvh0geSk4VxL/xP2Tsq/MkgH2BZHJlvEtPjJfbsZg
VZtng7bqblPLxKDrDY9alX7qVwjwNwj9l51W2DR4K2I+/R2vEhWYlr4IrD6B2WDZ
TiAZKoBZOqnFKz14vytEAmn4tZ4EbzKLo1ygIFY+6b9/8KDDd9Lz08zpoiv4wkRs
U5KBCJ34NOtKXXG9xxSuJPr3dhEYy7FB/4fu72EQG29Pld/hJtCZEgcFFNvH/yI+
Ps710wP2r+lOlCShgcHYA7VCQYuIcNCYUxMyNR/ZkZhvdf9ZXb8k/M3CR6IB1VTO
IRTFh0DCSwDbzBVzIwjcTdXOZno/++LKY/npLgYSd/M2oCc3NHg=
=XGuV
-----END PGP SIGNATURE-----
Merge tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/defconfig
ARM: multi_v7_defconfig: amlogic updtes for v5.12
- enable support for the ADC thermal sensor as module
* tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
Link: https://lore.kernel.org/r/7hsg6d2bxg.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update omap2plus_defconfig for the following options that got dropped:
- We have now default y for MEMCG_SWAP and SECCOMP with the options
already in omap2plus_defconfig
- The ZBOOT_ROM values now default to 0
- ARM_TI_CPUFREQ no longer exists and we're using the generic driver
now that selects DT_IDLE_STATES
- POWER_AVS option no longer exists
- The MEDIA and VIDEO related options are now selected when we have
CONFIG_MEDIA_SUPPORT_FILTER not set
- CEC_PLATFORM_DRIVERS no longer exists
- MEDIA_SUBDRV_AUTOSELECT is not selected by default
Signed-off-by: Tony Lindgren <tony@atomide.com>
