Because current PWM Kconfig is sorting by symbol name,
it looks strange ordering in menuconfig.
=> [ ] Renesas R-Car PWM support
=> [ ] Renesas TPU PWM support
[ ] Rockchip PWM support
=> [ ] Renesas RZ/G2L General PWM Timer support
=> [ ] Renesas RZ/G2L MTU3a PWM Timer support
Let's use common CONFIG_PWM_RENESAS_xxx symbol name for Renesas,
and sort it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/877c2mxrrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Enable more support for the Renesas RZN1D-DB and RZN1D-EB development
and expansion boards:
- Polled GPIO buttons (also used on the Marzen development board),
- Synopsys DesignWare I2C adapters,
- National Semiconductor LM75 sensors and compatibles (which requires
not disabling Hardware Monitoring support),
- Arasan SDHCI controllers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/a40aa69832ef292497b9170e2ad607bd9dfd7e21.1745842538.git.geert+renesas@glider.be
ARCH_RENESAS is already enabled in shmobile_defconfig, which ensures that
all ARM32 Renesas SoCs are enabled by default. As a result, explicitly
listing individual Renesas SoC entries is redundant. Remove these entries
to simplify the configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250401090133.68146-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable CONFIG_ARM_ATAG_DTB_COMPAT to allow U-Boot to override kernel
command line from DTB using the bootargs argument. This is needed at
least on R-Car H1 Marzen to control the command line from U-Boot.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250116153204.615736-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, and the removal of the EMMA Mobile USB Gadget staging driver,
there is no longer a need to enable support for board staging or any
other staging drivers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/7f1fa862cb508a5d29947380b72324be027ac76f.1705933596.git.geert+renesas@glider.be
As usual, the arm32 and arm64 defconfig files get changed to account
for added device drivers that can now be used.
The files are also refreshed to reflect the more recent Kconfig changes
that are going into v6.8.
-----BEGIN PGP SIGNATURE-----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=SHMt
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, the arm32 and arm64 defconfig files get changed to account
for added device drivers that can now be used.
The files are also refreshed to reflect the more recent Kconfig
changes that are going into v6.8"
* tag 'soc-defconfig-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: defconfig: remove dead platform options
ARM: defconfig: remove CONFIG_SLUB references
ARM: defconfig: remove CONFIG_NET_ETHERNET references
ARM: defconfig: remove sysfs-deprecated entries
ARM: defconfig: reorder config lines
arm64: defconfig reorder config lines
ARM: multi_v7_defconfig: Enable STM32 IPCC mailbox driver
arm64: defconfig: Enable Qualcomm SC8280XP camera clock controller
ARM: multi_v7_defconfig: Enable RPMSG CHAR and CTRL
ARM: multi_v7_defconfig: enable STM32 DCMIPP media support
arm64: defconfig: enable GPU clock controller for SM8[45]50
arm64: defconfig: Enable X1E80100 SoC base configs
arm64: defconfig: enable Qualcomm WSA884x driver
arm64: defconfig: enable Qualcomm UEFI Secure App driver
arm64: defconfig: enable Qualcomm sc8280xp sound drivers
arm64: defconfig: enable clock controller and pinctrl
arm64: defconfig: Enable DRM_POWERVR
arm64: defconfig: Enable configs for MT8195-Cherry-Tomato Chromebook
arm64: defconfig: Enable DA9211 regulator
arm64: deconfig: enable Qualcomm SM8650 SoC drivers
...
Now the DRM driver for the SH-Mobile LCD Controller supports DT, replace
the legacy frame buffer device driver by the DRM driver.
Disable frame buffer device drivers, as this was the last frame buffer
device driver for Renesas ARM systems.
Enable CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE, as these are no
longer auto-enabled since commit bb6c4507fe ("drm: fix up fbdev
Kconfig defaults").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3d17d8418ddabeb84ff5fa1cdd16439ddc84286f.1700669207.git.geert+renesas@glider.be
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmSZtjsACgkQu+CwddJF
iJqCTwf/XVhmAD7zMOj6g1aak5oHNZDRG5jufM5UNXmiWjCWT3w4DpltrJkz0PPm
mg3Ac5fjNUqesZ1SGtUbvoc363smroBrRudGEFrsUhqBcpR+S4fSneoDk+xqMypf
VLXP/8kJlFEBGMiR7ouAWnR4+u6JgY4E8E8JIPNzao5KE/L1lD83nY+Usjc/01ek
oqMyYVFRfncsGjGJXc5fOOTTCj768mRroF0sLmEegIonnwQkSHE7HWJ/nyaVraDV
bomnTIgMdVIDqharin08ZPIM7qBIWM09Uifaf0lIs6fIA94pQP+5Ko3mum2P/S+U
ON/qviSrlNgRXoHPJ3hvPHdfEU9cSg==
=1d0v
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLAB deprecation:
Following the discussion at LSF/MM 2023 [1] and no objections, the
SLAB allocator is deprecated by renaming the config option (to make
its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
also updated.
- SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):
There are (very limited) cases where kmem_cache merging is
undesirable, and existing ways to prevent it are hacky. Introduce a
new flag to do that cleanly and convert the existing hacky users.
Btrfs plans to use this for debug kernel builds (that use case is
always fine), networking for performance reasons (that should be very
rare).
- Replace the usage of weak PRNGs (David Keisar Schmidt):
In addition to using stronger RNGs for the security related features,
the code is a bit cleaner.
- Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
zhaoxinchao)
Link: https://lwn.net/Articles/932201/ [1]
* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
mm/slab_common: reduce an if statement in create_cache()
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
mm/slab_common: Replace invocation of weak PRNG
mm/slab: Replace invocation of weak PRNG
slub: Don't read nr_slabs and total_objects directly
slub: Remove slabs_node() function
slub: Remove CONFIG_SMP defined check
slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
slub: Correct the error code when slab_kset is NULL
mm/slab: correct return values in comment for _kmem_cache_create()
As discussed at LSF/MM [1] [2] and with no objections raised there,
deprecate the SLAB allocator. Rename the user-visible option so that
users with CONFIG_SLAB=y get a new prompt with explanation during make
oldconfig, while make olddefconfig will just switch to SLUB.
In all defconfigs with CONFIG_SLAB=y remove the line so those also
switch to SLUB. Regressions due to the switch should be reported to
linux-mm and slab maintainers.
[1] https://lore.kernel.org/all/4b9fc9c6-b48c-198f-5f80-811a44737e5f@suse.cz/
[2] https://lwn.net/Articles/932201/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Helge Deller <deller@gmx.de> # parisc
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHFsQAKCRCKwlD9ZEnx
cFnnAP0WWCnx50+oodGIJfcpb/QDcmXXVPa4EVrf92TvgqWrCQD+Nel3En9EYaWr
wt+GR2aZpa+E9Kfa9OovTzUWzvHiXw8=
=fwbH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jebc
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v6.1
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Refresh for v6.0-rc1
Link: https://lore.kernel.org/r/cover.1662111126.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Refresh the defconfig for Renesas ARM systems:
- Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies
(RZN1D-DB),
- Move CONFIG_CAN_RCAR=y (moved in commit d7786af598 ("net:
Kconfig: move the CAN device menu to the "Device Drivers"
section")),
- Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB),
- Enable RZ/N1 Pin control support (RZN1D-DB),
- Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be
The only Renesas platform with 16550 serial ports is Emma Mobile EV2,
which does not need any of the following options:
- CONFIG_SERIAL_8250_DEPRECATED_OPTIONS,
- CONFIG_SERIAL_8250_16550A_VARIANTS,
- CONFIG_SERIAL_8250_PCI,
- CONFIG_SERIAL_8250_PERICOM (new in v5.17-rc1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/caefa806d66b83085c4ceab09819b469088664a1.1643371790.git.geert+renesas@glider.be
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we will split the PANEL_SIMPLE driver in two. By
default let's give everyone who had the old driver enabled the new
driver too. If folks want to opt-out of one or the other they always
can later.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
As of commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB"), CONFIG_FB is no longer auto-enabled. While CONFIG_FB may
be considered unneeded for systems where graphics is provided by a DRM
driver, R-Mobile A1 still relies on a frame buffer device driver for
graphics support.
Restore support for graphics on R-Mobile A1 and graphical consoles on
DRM-based systems by explicitly enabling CONFIG_FB in the defconfig for
Renesas ARM systems.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4474be1d2c00c6ca97c2714844ea416a9ea9a9.1626084948.git.geert+renesas@glider.be
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refresh the defconfig for Renesas ARM boards:
- Drop CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 (no longer
needed since commit 39c3e30456 ("ARM: 8984/1: Kconfig: set
default ZBOOT_ROM_TEXT/BSS value to 0x0")),
- Move CONFIG_MEDIA_SUBDRV_AUTOSELECT (moved in commit
1b80d36aeb ("media: Kconfig: move the position of sub-driver
autoselection")),
- Drop CONFIG_MEDIA_CONTROLLER=y and CONFIG_VIDEO_V4L2_SUBDEV_API=y
(auto-enabled since commit 32a363d0b0 ("media: Kconfig files:
use select for V4L2 subdevs and MC")),
- Enable CONFIG_MEDIA_PLATFORM_SUPPORT (needed since commit
06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200624131931.3686-2-geert+renesas@glider.be
Update the defconfig for Renesas ARM boards:
- Enable CONFIG_DRM_DISPLAY_CONNECTOR (for HDMI, VGA, and composite
display connectors on various R-Car H1, Gen2, and RZ/G1 boards,
since commit 0c275c3017 ("drm/bridge: Add bridge driver for
display connectors")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200415124923.2510-1-geert+renesas@glider.be
The dumb-vga-dac driver can support simple DRM bridges without being
limited to VGA DACs. Rename it to simple-bridge.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
The iwg20d comes with an LCD panel from Emerging Display
Technologies Corporation (EDT), therefore enable what's
required to support it.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1573660292-10629-12-git-send-email-fabrizio.castro@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks
booting Debian 9, as systemd needs debugfs:
[FAILED] Failed to mount /sys/kernel/debug.
See 'systemctl status sys-kernel-debug.mount' for details.
[DEPEND] Dependency failed for Local File Systems.
...
You are in emergGive root password for maintenance
(or press Control-D to continue):
Fix this by enabling CONFIG_DEBUG_FS explicitly.
See also commit 18977008f4 ("ARM: multi_v7_defconfig: Restore
debugfs support").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
Update the defconfig for Renesas ARM boards:
- Drop CONFIG_ARM_ERRATA_754322=y (auto-enabled since commit
2eced4607a ("soc: renesas: Enable ARM_ERRATA_754322 for
affected Cortex-A9")),
- Drop CONFIG_MTD_M25P80=y (removed in commit b35b9a1036 ("mtd:
spi-nor: Move m25p80 code in spi-nor.c")),
- Drop CONFIG_LCD_CLASS_DEVICE=n (no longer auto-enabled since commit
bcd69da98e ("video: backlight: Drop default m for
{LCD,BACKLIGHT_CLASS_DEVICE}")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191025135325.32242-1-geert+renesas@glider.be
Remove the GENERIC_PHY config option from shmobile_defconfig, as it is
selected by PHY_RCAR_GEN3_USB2.
PHY_RCAR_GEN3_USB2 is enabled by the commit 0cd4f4f102
("ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig").
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The USB [EO]HCI controller on RZ/G1C SoC doesn't have PCI bridge like
other R-Car Gen2 devices. So enable generic USB [EO]HCI HCD PLATFORM
support in shmobile_defconfig.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
