Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.
Fixes: 724ba67515 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241104230628.3736186-1-csokas.bence@prolan.hu
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33
SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripherals:
- MicroSD card slot
- 4.0mm/1.7mm DC jack connected to ACIN of AXP223 (and a XH2.54 2-pin
connector for alternative 5V DC IN)
- OTG-capable microUSB port
- Reserved pads for soldering Li-ion battery and/or 3V RTC battery
- 3 LRADC-attached keys and 2 fixed function power/reset keys
- AP6212 Wi-Fi/BT combo module
- On-board GL850G hub attached to the USB host port of A33, and a
RTL8152 USB Ethernet chip at the downstream of the hub
- Onboard microphone (not supported yet) and headphone jack
- 3 UART ports as PH2.0 3-pin connectors (UART2 one is currently used as
debug output and others are ignored yet)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20240913104845.4112986-2-uwu@icenowy.me
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Anbernic RG-Nano is a small portable game device based on the
Allwinner V3s SoC. It has GPIO buttons on the face and side for
input, a single mono speaker, a 240x240 SPI controlled display, a USB-C
OTG port, an SD card slot for booting, and 64MB of RAM included in the
SoC. There does not appear to be a crystal feeding the internal RTC so
it does not keep proper time (for me it ran 8 hours slow in a 24 hour
period). External RTC works just fine.
Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker
- RTC (external RTC)
- USB
- Display
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230929144441.3409-5-macroalpha82@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.
These devices allow various modules to be connected and this enables
users to create out-of-tree device-tree overlays for these modules.
Please note that this change does increase the size of the resulting DTB
by ~30%. For example, with v6.4 increase in size is as follows:
22909 -> 29564 sun8i-h3-orangepi-lite.dtb
24214 -> 30935 sun8i-h3-bananapi-m2-plus.dtb
23915 -> 30664 sun8i-h3-nanopi-m1-plus.dtb
22969 -> 29537 sun8i-h3-nanopi-m1.dtb
24157 -> 30836 sun8i-h3-nanopi-duo2.dtb
24110 -> 30845 sun8i-h3-orangepi-plus2e.dtb
23472 -> 30037 sun8i-h3-orangepi-one.dtb
24600 -> 31410 sun8i-h3-orangepi-plus.dtb
23618 -> 30230 sun8i-h3-orangepi-2.dtb
22170 -> 28548 sun8i-h3-orangepi-zero-plus2.dtb
23258 -> 29795 sun8i-h3-nanopi-neo-air.dtb
23113 -> 29699 sun8i-h3-zeropi.dtb
22803 -> 29270 sun8i-h3-nanopi-neo.dtb
24674 -> 31318 sun8i-h3-nanopi-r1.dtb
23477 -> 30038 sun8i-h3-orangepi-pc.dtb
24622 -> 31380 sun8i-h3-bananapi-m2-plus-v1.2.dtb
23750 -> 30366 sun8i-h3-orangepi-pc-plus.dtb
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230627133703.355893-1-felix.moessbauer@siemens.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
