mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00
loongarch-next
2066 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Rob Herring
|
724ba67515 |
ARM: dts: Move .dts files to vendor sub-directories
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
86684c2481 |
ARM: dts: Add .dts files missing from the build
Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Arnd Bergmann
|
313c22bb31 |
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmSQRAMACgkQh9CWnEQH BwS+rg//Zp1d2bP9Vq7VrcxPyP+tB2VfxjpyGwKip/6wVB6rT2pUxph3B2Iml5OS W0i4oZbE1cYIgbJJYGXE3BmnTU9LI6aJlIhH0zQBoMKNjkBCxVSSr8QytG/NuYn7 w40zXCZmLZUBz10AZXW6lIMv3bJtuoCJiDXvP9wjwcfclrfs+VrshQLPUtYlrWxp LmDobd1Z6cw9eob9FtZ5Jo/w8RsGatNjORtfJkA5loozx0wP7vL267DtzmRKYNEo pZ3MtZe/La3HOOfSd+/bVqi5HgTAQzszwQL+3Oi30eybhMhrvDXhQkGTUGzJOtf3 ajd7LfhN+JhEjBd53IJMAnpy1jMs4cRqibTAbUldLOrbcgRbHikicSNPPKGT8t8S CRmb+oV8zBrmT9K1R2BJMjRYT4a7mTRY3a02vNnBHXsMtXZ959WCviVEuT6eIivo 5UpnoeFPW7ke4GiyWCqb240PmQ8mpe4LB5MkwpEwqhwdN58pPaQ4IgdS/+PBNGYi ksVAmOjyHDW4Z/Q/yn67tcDr9h1v8r5nk7/eJMLMC00EQ1LE3ysg18ZpUKowIL67 N+WVWt0ZjUo62tABPIh1zXFtuj90kDZ3VdrK9EBdT1zzHNU51+aZnbjPs59lhwNy Y4ZX4yu4p5loXjn+St7glZwBzsprQQHd6VNsRnFcgKynQzHtc3U= =t3sW -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSFGYACgkQYKtH/8kJ UifFjw//ZfVrYuz/WiXRWW0CKqsVzoB7M4aJ+ZrKHaaWGEqroc/2Hom7PNjRP0kA BWaXDEfdFOhY53m9ycS0EG4/eMVwdxEgYq3e2rkA4CAXfW35e0stmMWFqcmml3QI fv8xZEZKLLQy7D5yT4ZUS9FUqQeyOMnyQyq1P7m+87hN7JjUxJBjClhiFm6Hvo5g WBW7qVWGi7HWewpxflcNy0SJChiAyX04FezN863JPtZu3wD3q6fJlp44LripYXEu ekUdPFCtNultZd7t6Th3p4/4cESgXi18eQ6Cg3pfRJaEkwXUsvYTs+/ojUGEiQVI vSyFDeWdKd/2S4LUv2oXkbzb6Id5Bdio5rI5Wp1gZiHEzoWSLzAA1c13oV3/NXzo ilEi1hZQV303MaqrMiBD1rxrM++lCtkGkrPz+E59tip47p4YlJ5/oQj5FtW4rXlP HLjOXDWQENf1rXPrspEYEixGHyF4CzJJsl6ZaQnwwtheo4+hm73xBxhir/c3zQFO V/ptJh1v5Ys/S1jZMuk/XJkw39Q7/fwuKNP8L+3n8zxzQXb06DBJ2bBMmDOFarxG 8bLIypxsHtpwKa4UNyBXRhwdDVWttZLXaJD/+BQQDQgnX1BjTpTCJm9x5wBF39Yl vA4IUunfMlP+aV5rGR0GMjjXti/A7sPEZe2xrH4wv7XrpSb34Ok= =AA1g -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Cristian Birsan
|
11d5441cde
|
arm: dts: Enable device-tree overlay support for AT91 boards
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e86147a28a |
mvebu dt for 6.5 (part 1)
Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZIxa5gAKCRALBhiOFHI7 1aKaAJ96qgpdb0GyUJx+9pisNsOHrOG3owCgn1qjnmBqbBo9bjCHfckT8PAdc7Y= =+isi -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSE3UACgkQYKtH/8kJ UidK7Q//U6fQq9cukl2sOoxKZYPv9haNaU0QSu8OQ+mxoToCG5uQIFCr2dUAtsAS U2rl0BUVKx17w0IG/JA53tjHj2V/p3cVRGFf4DoJ4rQYaOStFp9lutnAC/g7qQ+Y whDk9vv7AM022wLYWog/j4OH3jJe/zzD666ClA32o/A+JMBFGIS9Rls6JgmbCNX0 6EJ6tDs20f6NlpBxiEAUBdnJism71zjP/6TFwLbS2jm4q9KXKng9BDB1TCj2UO8r igyU3U2dlUMCd4mgQkjphoGtwFFEBESO2BNPra84bL9ZujcufwFvn9sspx530B73 XYI282RF4mbqY4dHzmVZLL/9Jcp/6myNSHSSrCPQpuiSpbXu1/lnq/rF7yDsQ/d2 RsQ8wth/tL5qmgzBvTuA8OuMUo6JgNXiY9phOr+lSh5EduISOfQELvofukCtxjJa t5g13sbCIxXNWX5txWPir+79eWZk89xnSUQP3RwToTUilSry/wL7WiWIFcG2+Kep FX/QKnyp3DHt5nOarvYt5LOD3HIYZOKFbxwMkgFR9rM20U7Mnqc3aozCi7xXYSQ3 X3bLc8bc18Fw9hkVcLDpbx/acfyNWl9oq8gBTe36Sr58HMiqONQzd74f4ifYimvo Qzdb27leCzc0nak65S6rytvh50msm+Xsa4k1SWY/KtH+v6AxQKk= =ZYGA -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d09d747ee5 |
More Qualcomm ARM32 DeviceTree updates for v6.5
On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSLPokVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FBn0P/RnvmT74Rd4B0nfVmKAHm++z1QL1 s3vSxKanuwHM/fPUfNsKimBbhzTtu2YTB/m4Sp+HPGkjMnczQBbshf18tBPC3nJ1 h4UjwugpoE3JWnIDfeowSsyMGb1VoZr038TBe2FFwNcHrAb5zPC7K4gnsfJa4ZzE LTXMGwlZp8aNUQ7rG8WdLDU28E159UhLMeQJNw/nHZJTCisoJwznPO/b9VOkTDMe JjvfxqX5uEU7plBD2MCln/3qQLF78cj/eqc7szqaUGSJ7DSTlMh3de5zBGwHrKVH 6WOAcQGu1z6TOnlXv7BGxTX+0o3dXJd7CBiLg6couc7nh5fvzSC76JtnvICSUfid 89Jd9XUYyvPE+bk8BVoROgLfJk0llsDUw0bXv1I9cgZ4pX8J8+plyezghv56+IK+ 1GV8nR8in+zB9EFjB1rM/3TneHTNSVp1w6ytooMUczGpnDdkESq+q1srFZlE7Xba PmZsoMiWg32UPz1GAnU7WoYEmCG0bMWlrwHp4nK3QY7FBpB+fbpyIx9VFa/qFImf vMxOZDUnqXYL0p8Zg5bXRJSLsL+JAzxZyXRZpuK/vfd4EGLdGPEM33Y5gnyV0bgU 1q3EbF4dffBMhG6FP00mP49I40rKk8tvnFsCIPRZ34skTefFQKBG58eQ9orE9CsQ reVLvj6kRARSjWVT =UOBe -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEroACgkQYKtH/8kJ UidGqQ/+KxM0RFduGczHbURgHjbyUjaSmV4Ps0RPeodiOoi4QQbJJZerdpU9S0Gs 4GAxO8N6qRIurnT9AS18kE4FebaUO6N+CvCqTgpI1fWrjay40ocDz00sWD705gwC wjVrHA/TOoz6YTCP44HxuKdn+qn1un8Vu2VtIqFWp2GDvbiAKckZ6ysFICnVeM0X wPYl4PT/x9CHeee0nGr5XGv0tdymv6Nw5SAZrOpuvMGaSb4YNO1qLXm1Pm7IzX/P tAbfsgy2Pzqq0KGRonoW3W0yF3jpqaWKa7AUzJIflvunx6lJXAh1jBUypcnDBVs9 PiKoiUDUc+o0jJnKk2CD4SU8dTcZQwvcofohPo3CSzyklwri9++i4ICzDTPGOL7V F34vCyNZP/lS3CubQ37c6zhsueumy+HVAW4tbH7FXWQWpPR536qG8ykB0doLKW7B g5Xc1PmG6A1+JcEsPNd80Ot8g5hokCQCLD7+8Y7ZrrxxPccLmdN2/kWGfWdpKxNe O+mlscs+sEGlEH+SVzFeqVONRbVnIigKEHlDbNTlOhdChPd3Z/1uS5G7h45LFrE+ 5kIZZYwHioWR43F6SwHDFB5hIR3nZRsA/E1JqZ81T5EV6qRW/Z1VbyfkMkmJ8tF4 PrplHquj4O7gbA0fXulwV0ukbUDuOoIU1vPcNn7ugkPRkc4PzKc= =//4G -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM32 DeviceTree updates for v6.5 On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. * tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm: dts: qcom: sdx55: Add interconnect path ARM: dts: qcom: msm8226: Add thermal zones node ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells ARM: dts: qcom: msm8226: Add qfprom node ARM: dts: qcom: pm8941: Add thermal zone config ARM: dts: qcom: pm8841: Add thermal zone config ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config ARM: dts: qcom: msm8974: rename labels for DSI nodes ARM: dts: qcom: apq8074-dragonboard: add gpio keys ARM: dts: qcom: apq8074-dragonboard: add onboard leds ARM: dts: qcom: Add Samsung Galaxy Express support ARM: dts: qcom: msm8960: Add USB node ARM: dts: qcom: adapt to LP855X bindings changes ARM: dts: qcom: msm8226: Provide clocks to mmcc node ARM: dts: qcom: msm8226: Use XO from rpmcc where possible Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
f50a4e594d |
i.MX ARM device tree for 6.5:
- New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmSEHHAUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4uBQf+K+vrTJNgrc6S/B4pRvU+JMCc8ncU abW36M3e7ESvcIlzojJpPO/Xap0aiHaD6rsjNKvWmT8Bwp37s+gMTcGLvciEsUqR eT+e0ehWxKYCv3xTtjWtg2PB3cvGfDKMmMLrG8QW/eOIPHgH20z+Uw6zTDA1ssjx IUcDVkvpjE/OxzIfYreIMRvrCHkconrwoC+cxCzQ/7UlgKwWFoqmCmwRgORbvHR3 nK/RTYsP1JYewBM83pywMACK2GOu/YOs6d8ey7RBrnrXOzIeDW4qtPySkuberH8U VAyalU1XE1bbxiaAmhe4oqx5RBAtFhu2Rt8Ob+hiCTebeXtwO5JWRv7Pww== =VEXO -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDjIACgkQYKtH/8kJ UieaXBAA3T4563BCdWdEqADiAP5yzEd98KszGqHPT10CDFBr9SnYD9lMQ4x51R+6 Due1HJGNYg9vDfZUwmbb0Uqq6ytpES7cuLstGXpdHZ5lmsbvsG/kuLoRU/pj8efS uCDgObAcn0FwRicaialCqPuOIT6ISGreo0E6KB468VJgKKyM+P0R2Tmm7pPQEXFD 0cef39UOJ8GVSueWMb5Jd9Oicd2olEDAH5REklGIHwlPvu/EDAy2UTBMNfKoxDWk 9COPBKcPvRDeLrZVAZzw3KCqnT5FYrTTIA5BF2O3v4ps22AukA4gCrIEhLj3jSjT YbivS2TBmYRS1+xdj8hm87SNVAi5tQGWadv5QwLNyNX6iB7A5nsoUESLduHAJPDZ XVOBGdSUcFFIM0pvy8+sjryJFt3hhRTMiJ63xN+8Ci+AraMZU9x1BDvA0tMkKE6V 32xL1CqdzZLhVcg/gMf7i3ryiNUCAFXroS65rBjd4hFbZiLKCnPXgFzJOs5CnOCt cavbENfGZAEKiP+3sz9a+eodKioixzWEMbWXOnJ1YVlM1UJLQHaazvJHE0cc8XuI /pPYRf5EaR48E/Gn+RWnEAo8NCp9FJAGCaHI1ZZWdnHxhSAujPjvEiScMkOyuZId 06PstmBt8FAD4T6bAEDqqK6k+qGiAe+EKq5S3+EvrFjmY45eWVI= =Sg9p -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
52d38cff94 |
- fix DCLK clock names
- new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCZIOTTQAKCRB0Ba7+DO8k k5xnAQC7SiKb7nM57GcvalNzvMRhpo0z0gpGvWRQS72kpIHbjgEA03DMyS88cksb RJj1gooMbGyrINBRQF2JmCSxDVG7fw4= =Ads4 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDcsACgkQYKtH/8kJ UidblRAAqA3rpCvxHhIFfPnANEDpPPXP8Op6XMip5usfns123mD+DqwEdPrTBkEt +20ikAcqPsYMxHz02LPLVX66n0QHscwNHlXzCrJpsidLAr5m3EmC0PqTYFPwixEI ow0MjL4JukBUnVn+p0c5K0dx56Pb+29RBsqsVR7jNM0DFVsm1CbrtfRZbGcHwNFe sKou+Qa+JawQa7w8T092T6ke9tDCHA666j9wJGiw7xnNVaFiBSWGhGO97VpDQ3nV z8cCfyugFQ34+Tbmtyzj20lAxp6dvqMG2E67E/2gpYxHSDLIiwaVwP5QaafaCjgm ZhgXlfHn8HCoC+JUv0X02Fp13OZrWR4XWIi1bL1QcenlaAknZ9HwiOm8F3xJJaGE 2WBkuHs7l7x4WkWacUXir4CRU+lkSKvbHQpz38aZhI/GT97fFkzsGbJ65VGBRzdA 68GGwbQxs/Z4Hj5Drea4f2CbY4wLHMuaJQErYncMtnbIPcQDGGiaLFRMrrLn7UFZ r/5wdtvyW8mWTcFkhCq63b+IutI5NBgpPNdSZc/YflPOSWenchtAaSy6OkQVEYax dpm9YFV5Vu/KY8HrEi2UQadEzxu6o+V4rN/BSF0UVRk267NDz1xbtLuSE7NiyCFD PcR2/yPLpMQeRma5F4eeeXSOtfUxxNnYJ/cClhHs891F6NpXxdo= =76YI -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b1062d1971 |
STM32 DT for v6.5, round 1
Highlights:
----------
- MCU/MPU:
- Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
- Fix LTDC/DSI warnings.
- MPU:
- STMP32MP15:
- Add OTP part number and Vrefint calibration in bsec.
- M4 hold management updated. As SMC call is deprecated,
the service is moved on a SCMI service.
- Add ADC internal channels (VREFINT/VDDCORE).
- ST:
- Enable ADC1&2 on STM32MP15 DKx boards.
- Adopt generic IIO bindings on STM32MP157C ED1
- Add supplies for OV5640 in STM32MP157C EV1
to fix yaml validation.
- Fix i2s bindings to match with the YAML validation (DKx boards).
- DH:
- Rearrange MAC EEPROM.
- Rename AV96 sound card.
- Adopt generic IIo bindings.
- Fix audio routing.
-PHYTEC:
- Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.
-----BEGIN PGP SIGNATURE-----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=kf1Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kRKO
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.5, round 1
Highlights:
----------
- MCU/MPU:
- Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
- Fix LTDC/DSI warnings.
- MPU:
- STMP32MP15:
- Add OTP part number and Vrefint calibration in bsec.
- M4 hold management updated. As SMC call is deprecated,
the service is moved on a SCMI service.
- Add ADC internal channels (VREFINT/VDDCORE).
- ST:
- Enable ADC1&2 on STM32MP15 DKx boards.
- Adopt generic IIO bindings on STM32MP157C ED1
- Add supplies for OV5640 in STM32MP157C EV1
to fix yaml validation.
- Fix i2s bindings to match with the YAML validation (DKx boards).
- DH:
- Rearrange MAC EEPROM.
- Rename AV96 sound card.
- Adopt generic IIo bindings.
- Fix audio routing.
-PHYTEC:
- Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.
* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
ARM: dts: stm32: add vrefint calibration on stm32mp15
ARM: dts: stm32: add adc internal channels to stm32mp15
ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
ARM: dts: stm32: fix warnings on stm32f469-disco board
ARM: dts: stm32: Shorten the AV96 HDMI sound card name
ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
ARM: dts: stm32: add STM32MP1-based Phytec board
...
Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Rudraksha Gupta
|
2b01dda161 |
ARM: dts: qcom: Add Samsung Galaxy Express support
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and USB. Signed-off-by: Rudraksha Gupta <guptarud@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230607050025.86636-5-guptarud@gmail.com |
||
|
Aurelien Jarno
|
e925743edc |
arm: dts: bcm: Enable device-tree overlay support for RPi devices
Add the '-@' DTC option for the Raspberry Pi devices. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (for instance from the firmware or the bootloader) on these devices. The Rasbperry Pi devices are well known for their GPIO header, that allow various "HATs" or other modules do be connected and this enables users to create out-of-tree device-tree overlays for these modules. Please note that this change does increase the size of the resulting DTB by ~40%. For example, with v6.4-rc1 increase in size is as follows: bcm2711-rpi-400.dtb 27556 -> 38141 bytes bcm2711-rpi-4-b.dtb 27484 -> 38069 bytes bcm2711-rpi-cm4-io.dtb 27373 -> 38076 bytes bcm2835-rpi-a.dtb 12879 -> 18235 bytes bcm2835-rpi-a-plus.dtb 13015 -> 18371 bytes bcm2835-rpi-b.dtb 12997 -> 18377 bytes bcm2835-rpi-b-plus.dtb 13237 -> 18666 bytes bcm2835-rpi-b-rev2.dtb 13085 -> 18514 bytes bcm2835-rpi-cm1-io1.dtb 13109 -> 18528 bytes bcm2835-rpi-zero.dtb 12923 -> 18311 bytes bcm2835-rpi-zero-w.dtb 13449 -> 18889 bytes bcm2836-rpi-2-b.dtb 14500 -> 20252 bytes bcm2837-rpi-3-a-plus.dtb 14930 -> 20713 bytes bcm2837-rpi-3-b.dtb 15107 -> 20979 bytes bcm2837-rpi-3-b-plus.dtb 15463 -> 21443 bytes bcm2837-rpi-cm3-io3.dtb 14429 -> 20098 bytes bcm2837-rpi-zero-2-w.dtb 14781 -> 20524 bytes Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Link: https://lore.kernel.org/r/20220410225940.135744-3-aurelien@aurel32.net [ukleinek: rebased to v6.4-rc1] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> |
||
|
Andreas Kemnade
|
445d5be64b |
ARM: dts: omap4: add initial support for Epson Moverio BT-200
Add the devices working with current drivers for the Epson Moverio BT-200 AR glasses consisting of a control unit and the glasses itself. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-Id: <20230313110409.2294154-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Ludwig Kormann
|
de2bdfb7f7 |
arm: dts: sunxi: Add ICnova A20 ADB4006 board
Add board support for ICnova A20 SomPi compute module on ICnova ADB4006 development board. Specification: SoM - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz - 512MB DDR3 RAM - Fast Ethernet (Phy: Realtek RTL8201CP) ADB4006 - I2C - 2x USB 2.0 - 1x Fast Ethernet port - 1x SATA - 2x buttons (PWRON, Boot) - 2x LEDS - serial console - HDMI - µSD-Card slot - Audio Line-In / Line-Out - GPIO pinheaders https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006 https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230510111528.2155582-3-ludwig.kormann@ict42.de Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> |
||
|
Steffen Trumtrar
|
b195a9d7f7 |
ARM: dts: stm32: add STM32MP1-based Phytec board
Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec stm32m157c-som. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Christoph Niedermaier
|
145e2732a5 |
ARM: dts: imx6ull-dhcor: Add Marantec maveo box
Add support for Marantec maveo box. The system is used to get a smart conntection to a door drive. It has USB, WiFi, Bluetooth, Zigbee and NFC interfaces. The core of this system is a soldered i.MX6ULL DHCOR SoM from DH electronics. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Pawel Dembicki
|
5668d088ee |
ARM: dts: kirkwood: Add Endian 4i Edge 200 board
Add Endian 4i Edge 200 is 5-port firewall.
It have also clone: Endian UTM Mini (The same hardware, with added WLAN
card).
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 512MB (Micron 29F4G08AAC)
- Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
- Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: MicroSD Slot
- MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
(Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
- USB: 1x USB 2.0 port
- Console: RJ-45 port
- LEDs: 3x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
||
|
Arnd Bergmann
|
8f09b5ec41 |
- added D1 crypto node
- enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCZDFhwAAKCRB0Ba7+DO8k k4J/AP0UdafVPx8HFMiXUBABSdrSVvwDWDhXcqeMiWQXZ6UWogEA7gUTOZ+ZFr2u /GDOiM0CscDyQlbHWEYx5tkAhfBUnQU= =Sv3O -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5dGQACgkQYKtH/8kJ UicCgA//fqzpR1CLYH4xCF6jIiVtTEPAEU615BA+AJAWg9mACWALutARbTmvOfJo jUpCyNsVV6vCH1kGLBj36FgkVOTid691Q7lEo4lrR8Mg9hV3S+rBlbgbMD6LRX54 qSmvDVxKh3AFcDvbfxBYMKRBo+kq4samrbin0W+7E6C7Q9hqEzDGMgMRTrAGyRiF H3w6Anjbm8jdUddMGHTNveGVJZG8VDKAdOeDVzvQMACg83S4CgQWSyH/AQhq0OtG kpCMS+d3/0ElO6to0yXt5BlrsfqqmFk2lc9ovDfVUU3Z+uNOfc+V83w2mqt8+jeF Y2+kptB0LeEWwqDxFJeAHPIztPlhfZeqszsbzfAPoxhbqg1FyHGqtdsuAj/I82TD dnDVoipEWJHOf3Go3TDgz9fetsRidett0ZfAxQy2Z1/5NTRDNfFY2hSJbf1haEvO 4BOm8ZpVDHPY/wMbinu+4kiFmzu6eVMUITkdNjYAzx5W5TkPK7comTNhDe3k97dD gWyToAsAjbs6jxsRYI4M9DP7y0YR8hFuOIOMt1dibXn/S2VkteboBhID8hxl1fuY yf0p7PWkyk5ev9r6+vZScmlwDqfNXingd9Bdmr5xaRl4kIKCVO6oDJpoQT/O2dY8 kY3YIklnbJgiDsgNFJNSYqWMI+xFO8aQQDZFmDf5Wh2/3qWnvWc= =Dm8i -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - added D1 crypto node - enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s * tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: add MangoPi MQ-R-T113 board dt-bindings: arm: sunxi: document MangoPi MQ-R board names ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dts: add riscv include prefix link ARM: dts: suniv: Add Lctech Pi F1C200s devicetree ARM: dts: suniv: add device tree for PopStick v1.1 dt-binding: arm: sunxi: add two board compatible strings dt-bindings: vendor-prefixes: add Source Parts and Lctech names ARM: dts: suniv: licheepi-nano: enable USB ARM: dts: suniv: add USB-related device nodes riscv: dts: nezha-d1: add gpio-line-names arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS riscv: dts: allwinner: d1: Add crypto engine node Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
0efb9fa003 |
i.MX arm32 device tree changes for 6.4:
- New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxJLYUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4t4ggAigOtwEXTRhhC7IZvZssp2ZlKhIJ7 kBKRCv1tZyyDIH6ZSrEiysjGALSPii/FrEg+Xr09ye/VPCP1kQSmXrPUpunTTqHT 3MEABv+uTH7IcLdI0g7CBUkVL+pj5sPmzQw48qA5Xrgfb8ip6HaZ4SdmoiemhrnK oQq9YRfSaOHGGVxc9SIrNPueUXZ+tUMjpWs5oi8ITm2EbMCNxwFmOCtQM038enXO MPG8COX2IxWyhCg6sqV9Lb2wPv0l+cKF2YiDKMvENjFkoUhDKgG2engr50OjHWl6 rbzaGsgjmZaq4uNhHdCbBNd849O8pH+dbT1Ix1jYAUe9r8TFKgcWp+r6xQ== =PiES -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5cN4ACgkQYKtH/8kJ UicG7w//bCBxm2ZmSkpPZWoOmDMRq1OG3O35KJdZgtwGDZH5E4UMN/j0rnvVCKR5 pqNQHfG4f7OfTk2lq0HDfWFifaXmEJyOXXtCxYWoS5fIXgzOgb6lbcQNRqzNMmXX WtE6Ut8+lOdoB45fDP1Zgy1qP5w6IOHvOcKaTXs0jNs4KXhLu1i+i70PuEG/jkjY vt9W1hVVziM48KucbXQ9FAmSnZ4Pr0mHlFggamZRsRmx5dfioOsWyy4miVZy59PK 7v6s6dmJ7LBlxM+nrtWYGbRHv7agociuCGF8gZwaKOl34OuuBYAda5F+hTLrx539 oAi1ck7GblWklPp+wMMgwp6eT7jIX/TmF05lMvMnPp3aczLlUT7UdkweruyMS+04 GPt+GNK025sR4FNIFCybOF6/oUSe7v2nMBLDDfe4mKltpg0k0LcgR7AbRN8qMVYB Ekt68WJPDP9sRZ1tRyq0F6CKLdqYf828o9zCrSc/QWqmZeIfv/FubMkiJB2PpRVf fZfzXtLOudmddSdlSY8YCKm2JG/Z2QLf7kIlg/W4Ue5iaGIaX5YQjPf1LG6s3RKf hPDbQTk28lj4XajAdQPdv0Dl9KONiqTeKQ1G5L6MSwTFaHnMpxTVlZNsKT2LSmXo 7fgsksfkxN4CRXlM13lLdVdQprwKXyx11iYfebdl8V3vqLst3lg= =Pr0F -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm32 device tree changes for 6.4: - New board device trees: Tolino Vison, chargebyte Tarragon, new revision of the IOTA board. - A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC. - A series from Oleksij Rempel to configure Ethernet reference clock from device tree. - A series from Stefan Wahren to use label references for i.MX28 based boards. * tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits) ARM: dts: imx6ull: Add chargebyte Tarragon support ARM: dts: imx: Add devicetree for Tolino Vison ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board ARM: dts: imx6dl-yapp4: Remove unneeded status "okay" ARM: dts: imx6dl-yapp4: Move status to the end of property list ARM: dts: imx6dl-yapp4: Move phy reset into switch node ARM: dts: imx28-tx28: add SPDX-License-Identifier ARM: dts: imx28-ts4600: Convert to use label references ARM: dts: imx28-evk: Convert to use label references ARM: dts: imx28-duckbill-2: Include base board ARM: dts: imx28-duckbill: Convert to use label references ARM: dts: imx28-cfa10036: Convert to use label references ARM: dts: imx28-apx4devkit: Convert to use label references ARM: dts: imx28-m28/sps1: Convert to use label references ARM: dts: imx28-apf28: Convert to use label references ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815 ARM: dts: imx7d-remarkable2: Enable the cyttsp5 ARM: dts: imx6dl-yapp4: Use reset-gpios property name ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL ... Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Stefan Wahren
|
5e4f393ccb |
ARM: dts: imx6ull: Add chargebyte Tarragon support
This adds the support for chargebyte Tarragon, which is an Electrical Vehicle Supply Equipment (EVSE) for AC charging stations (according to IEC 61851, ISO 15118). The Tarragon board is based on an i.MX6ULL SoC and is available in 4 variants (Master, Slave, SlaveXT, Micro), which provide more or less peripherals. Supported features: * 512 MB DDR RAM * eMMC * Debug UART * 100 Mbit Ethernet * USB 2.0 Host interface * Powerline communication (QCA700x) * 2x RS485 * Digital in- and outputs (12 V) * One-Wire master for external temp sensors * 2x relay outputs * 2x motor interfaces Link: https://chargebyte.com/products/charging-station-communication/charge-control-c Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Neil Armstrong
|
a9414bef86 |
ARM: dts: oxnas: remove obsolete device tree files
Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andre Przywara
|
20c5db6c3d |
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
The MangoPi MQ-R-T113 is a small SBC with the Allwinner T113-s3 SoC. The SoC features two Arm Cortex-A7 cores and 128 MB of co-packaged DDR3 DRAM. The board adds mostly connectors and the required regulators, plus a Realtek RTL8189FTV WiFi chip. Power comes in via a USB-C connector wired as a peripheral, and there is a second USB-C connector usable as a host port. Add a .dtsi file describing most of the board's peripherals, and include that from the actual board .dts file. This allows to re-use the .dtsi for the MQ-R-F113 RISC-V variant of that board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230320005249.13403-5-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> |
||
|
Andrew Davis
|
a63945c3b5 |
ARM: dts: am57xx-idk: Add IDK displays and touchscreens
This is a more interesting use of DT Overlays than the previous patches.
Here we have two touchscreen modules. Each is compatible with, and can be
attached to, either of the two AM57xx IDK development board variants
(AM571x or AM572x).
Due to the way the extension header was wired on the development boards,
the touch sensor on the touchscreen modules will connect to different
SoC pins when connected. For this the touch sensor is modeled as an
additional overlay that is specific to the development board for which it
is connected.
Basically the LCD overlay can be swapped, but the touchscreen overlay
that attaches to the LCD must be used with the corresponding base DT
and not to the LCD.
AM571x -\ /- osd101t2045.dtbo -\ /- am571x-idk-touchscreen.dtbo
X X
AM572x -/ \- osd101t2587.dtbo -/ \- am572x-idk-touchscreen.dtbo
Signed-off-by: Andrew Davis <afd@ti.com>
Message-Id: <20230307161715.15209-4-afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
||
|
Andrew Davis
|
26d03d1417 |
ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support
The A3 revision of the AM57xx GP EVM has the same EVM feature set as the original but is paired with an updated revision C BeagleBoard X15. DT Overlays allow us to model this in the same way, we simply apply the EVM overlay to the Rev C BeagleBoard to create the Rev A3 AM57xx GP EVM. Signed-off-by: Andrew Davis <afd@ti.com> Message-Id: <20230307161715.15209-3-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Andrew Davis
|
0fff0e49d7 |
ARM: dts: ti: Add AM57xx GP EVM board support
The AM57xx GP EVM boards are built on top the AM57xx BeagleBoard-X15. The EVM extends the BeagleBoard by adding a touchscreen, some buttons, and a handful of peripheral extension slots. Being a plugin extension of an existing standalone board; we define the am57xx-evm as a composite-DTB of the base am57xx-beagle-x15 and a new am57xx-evm overlay. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Message-Id: <20230307161715.15209-2-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Andreas Kemnade
|
f491698935 |
ARM: dts: imx: Add devicetree for Tolino Vison
Add a devicetree for the Tolino Vision Ebook reader. It is based on boards marked with "37NB-E60Q30+4A3". It is equipped with an i.MX6SL SoC. Expected to work: - Buttons - Wifi - LEDs - uSD - eMMC - USB - RTC - Touchscreen - Backlight Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Michal Vokáč
|
7da4734751 |
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
The PCB used for all the current boards (Ursa, Draco, Hydra, Orion, Crux) was slightly redesigned and delivers some new features while some unused components were removed. - External RTC chip with supercap added. - Secure element added. - LCD display power supply enable/disable signal added. - Touch keyboard reset and interrupt signals added. - Factory reset GPIO button added. - Audio codec LM49350 (EoL) removed and replaced by PWM audio output. - QCA8334 switch was replaced by Marvell 88E6141. - PCIe completely removed. - uSD card removed and replaced by board-to-board expansion connector. There are four configuration variants of the new board: 1. Pegasus The board configuration is based on Orion with the following major changes: - Quad core SoC - 4GB of RAM - RTC with supercap added - Secure element added 2. Pegasus+ This is the very same board as Pegasus but uses the i.MX6QuadPlus SoC. 3. Lynx The board configuration is based on Draco with the following major changes: - DualLite SoC - 1GB of RAM - RTC with supercap added - Secure element added 4. Phoenix The board configuration is based on Ursa with the following major changes: - DualLite Soc - 1GB of RAM - RTC with supercap added - Secure element added - LCD display support removed - UART2 removed - Factory reset GPIO button added Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Andre Przywara
|
cc1858614f |
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Alongside the obligatory micro-SD card slot, the board features a SPI-NAND flash chip, LCD and touch connectors, and unpopulated expansion header pins. There are two USB Type-C ports on the board: One supplies the power, also connects to the USB MUSB OTG controller port. The other one is connected to an CH340 USB serial chip, which in turn is connected to UART1. Add a devicetree file, so that the board can be used easily. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230319212936.26649-7-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> |
||
|
Icenowy Zheng
|
7452d4799c |
ARM: dts: suniv: add device tree for PopStick v1.1
PopStick is a minimal Allwinner F1C200s dongle, with its USB controller wired to a USB Type-A plug, a SD slot and a SPI NAND flash on board, and an on-board CH340 USB-UART converted connected to F1C200s's UART0. Add a device tree for it. As F1C200s is just F1C100s with a different DRAM chip co-packaged, directly use F1C100s DTSI here. This commit covers the v1.1 version of this board, which is now shipped. v1.0 is some internal sample that have not been shipped at all. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230319212936.26649-6-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> |
||
|
Linus Torvalds
|
950b6662e2 |
SoC: DT changes for 6.3
About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for
TV boxes and so far only comes with a dts for its refernece design.
The other 32-bit boards that were added are two ASpeed AST2600 based BMC
boards, the Microchip sam9x60_curiosity development board (Armv5 based!),
the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53
and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113 chip,
plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700 non-merge
changesets, among them over 400 alone for Qualcomm. The newly added SoCs
this time are all recent high-end embedded SoCs for various markets,
each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410),
SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568,
RK3566 and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding
to the total number of changes.
-----BEGIN PGP SIGNATURE-----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=I8Ga
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
|
||
|
Arnd Bergmann
|
5be374d0d1 |
SoCFPGA dts updates for v6.3, part 2
- Add support for the enclustra PE1 board that is based on Arria10 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmPuVEwACgkQGZQEC4Gj KPTCNw//ep469IEVowFT5PXHc9gKCHek678rsxjoY9xDtRfIksxA2YLhkoJW8Znc NZJ5rN/pnTEyofwPxVPaqb2HQexAogyEAvSv9s3azzPijbbVkKuXKN9EsBeJEISK uFN+fpFWo66ZHRNMcEarOQEs4Jjguw/ZdooQCw+P/uliyesepBvsmbqVkqs/aAzv LMhChMxXqu0eXswQGZrsk/d/HD7wNuG14+aWtT3x3fMaVuLOyUIhQMUi0Wp2URl8 vILWX2i4W2KryENcWYX8irX5iBuEPjLMuUf0B3U21opCttxMIxIvq3aesWzgoMyX uz07VX0ggS/32umTO9c756xoFDa7oUKDiqU9GOnOSUfPUcL1YhB5c2TSPs492Zwd Q9cs5ZPmbP3OM1n6EwNC4IFoUal+/jQ4OGHMGk2P1jruiZ/8h/A63EBjtnOnTyPz JQXT2VgA6Sx+LLq+RvDuTTlpZp03TjnhIpzz0njJkGB16leYkDrD/el1WBQ4k7f7 0U+466Gj/BcvyE5pKlgPaJzqETylJdt7udgqNsQL6LwiJW7lgY0li4vg7n0tnZy7 ccz2MnZN+9SRShEePcxMoeZFxBE7glTH6/2wET9bvMp0osl5ujTPHDxfWTMX+KfE Jzjma8LakI8qa/OX19kTmb5rfyO5DDF7NEozq4CGWvuaetqEzfU= =8EYA -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPumuIACgkQmmx57+YA GNmebhAAoJcW9YTJS1ablsuQxC8cwt5fJpd1y7H5nEykQuIhQoo9NOoxrHkyZuhx k/gTKs91ssWkGs5cDU13FPHJMWAq///oNAo+6YUyYXHF9roKjqUzcJc32Fyps+7s cZSBfC+152332+nidFtPZwzDeUtThHN4OR7WMqNrKY0ouDSN+MeBLLZBPN+jOvhL IUYNa1BY5m1+3n8D92jZ7k+/NXmVctKMs0xJ61+ACE6V4coAjjDA6JS0ox/c1Kf1 uCSN/qaqwOjIEShsoABBJD2AILbZ2JUbNfxopyPBBSFCeqD/apQM8Wmh59kvH5Zj H+jNLmn6dFEM/3VjcKPL7/02gARY0GfhjGHkCy2Kjv8M/gQB2zZhJKBu73YdlfuI wRIIrwcFDQSoFDSQnTC973jwte56Xlp6o0e+0Af4PpwnN7bLdNSfcr4g7mMQmP1+ lrJjNuDoKuDk6qaeSpYf1VTR2AbXtg2ks140C0c07oyiASOKEamhK78DMt9OrFm4 DrPW8/2v2jVlAC0YAApFfocZs2Xsp8w4K1JQE1kBEW/Vn2QeM4oJjwg+OHaVx/59 snXVr6Eu82trn+z1QAQ9bdcocZXHR8alwZ0sVCMdjyfd07uOrceTFRx0qzIGSUsc U+CAZwTwkl91LTNdNJXolnO9NaQ46xVw5LkTxFIwFiLDHXBKDLI= =E8ON -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA dts updates for v6.3, part 2 - Add support for the enclustra PE1 board that is based on Arria10 * tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Steffen Trumtrar
|
2d050f0648 |
ARM: dts: socfpga: Add enclustra PE1 devicetree
The enclustra PE1 is a baseboard from enclustra GmbH for the enclustra Mercury AA1+ SOM. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> |
||
|
Arnd Bergmann
|
306b8201b0 |
AT91 device tree updates for 6.3 #2
It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY+N5WwAKCRCejrg/N2X7 /QIbAQCQ5aARiG6B3IglSdVTQk8a+CRWpelxB9CMCXEohhRkhgD+JS6XRejjoF78 cj3J30OP1SnkZQtTOygxEtmaxEMHNw0= =gcby -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPk71QACgkQmmx57+YA GNl+bBAAs549afzrf1oU7Iix5uMbSP77kUOB7g+SggOIEK0W5WDixbrklEBQ8X1t pZcRFDi/Z00o+Trxo6o0M4mlTu3nfO6uwbaCOpYZKjrZ4KLmzGd+EwPyEpWblHRF DdAtaU0NvPXcarb28Yf22mtx4p1O22KZOZ2FUMxrCVIH0IFVH7Lx8wu//kZjAclv 69/pG+MeXj9b0winnWx4/AhwpxWS1eX+phy6xymxTbw7uu1EPJ1L5Ho3VmjsDczR daHKsxsJfv6ht1KMHSNBAWOj/fMsK3FnuP3oIFV7vLGcM4pEupuQ2SVOnCKTLYyY AW4lIwfQe09ayNcI9X8Wj3cK/CQw75B6sMprxGTJrRz0yXlrZL3cpGtp+e2mECI2 MV6Yje9SsefpfGFMdKPUsKJ5Pn5QOmzvMELYwjhzXY22lyVGsqVUOMCMNnArHKSq BnpvZi9SpNleAtV2kHoFhCpoLCRoOiQb/n0kw+LBnXjO0Zc2m79cxN8lHY2XsYD2 OauFJ+DCuBVQmtQUSDtsnlUeUgC24O1CgZu3rfISZ7W0y6+OQT9TeWhMQvfOte3A sqJ7WPTFjrtpxgsFfzAgHCdfkF8sF6KqwNJZLws98fi9mTN7WRBIXcY8nQpljKjp WED1dUVaOt0B8YpQhYrlA8nCraroMOWjBrRPaP31HsGM7O9roOw= =Oe5O -----END PGP SIGNATURE----- Merge tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 device tree updates for 6.3 #2 It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors * tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60: Add missing flexcom definitions ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: fix spi4 node ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
153927e6f6 |
ASPEED device tree updates for 6.3
- New machines
* Ufispace NCPLite AST2600 BMC
* Facebook Greatlakes AST2600 BMC
- Updates for ethanolx, bletchley and tyan s8036
-----BEGIN PGP SIGNATURE-----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=Oyj6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5gN/
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 6.3
- New machines
* Ufispace NCPLite AST2600 BMC
* Facebook Greatlakes AST2600 BMC
- Updates for ethanolx, bletchley and tyan s8036
* tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: p10bmc: Enable UART2
ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
dt-bindings: arm: aspeed: document Ufispace NCPLite BMC
dt-bindings: vendor-prefixes: Add prefix for Ufi Space
arm: dts: aspeed: tyan s8036: Enable kcs interrupts
ARM: dts: aspeed: bletchley: Enable wdtrst1
ARM: dts: aspeed: bletchley: Rename flash1 label
ARM: dts: aspeed: ethanolx: Add BIOS flash chip
ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1
ARM: dts: aspeed: ethanolx: Add label for the master partition
ARM: dts: aspeed: ethanolx: Correct EEPROM device name
ARM: dts: aspeed: ethanolx: Enable VUART
ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC
dt-bindings: arm: aspeed: add Facebook Greatlakes board
Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Durai Manickam KR
|
3048a4deee |
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
Add device tree file for sam9x60 curiosity board. Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230207110651.197268-9-durai.manickamkr@microchip.com |
||
|
Arnd Bergmann
|
eacef7cc52 |
Two new 32bit SoC were added, the rv1126 and rk3128.
New boards are thr rk3128-eval-board, and a number of rv1126-based compute modules from Edgeble AI. Also included are some dt-binding improvements with relevant Acks from maintainers when the changes touch these areas. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmPapsgQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgU8SB/oCQymVxzPs3uJc9c+qFzB1Jnfja2BKQTmf zVTHjgfekCe39CdnwuFBgFni0GMrx5gbz/aO4x5L1sXL0ov6AhwMU1PVe3cFYH28 Q0xxDtYiv8r7lFEo2S53SlYn2+J7hFlgzl1hksfU4x02BzXdVJbun2D14fFayz+l 1CuezLmvZvqRYocIvh+cb7tvv0drAhyD/ffeTGinmg9Srw5r8cBIuSID/Nx7AooD gTV93OqQMXNHSaDPxRWUVL1nhhBb2vVu81rvpkqHp8RN/vKjtx6X9dgbHvlkXRDf JwW7UrfvULvoc3kihqsa1Cd4atOSxjjNb0wPRfnHmvIhEEvF3cTs =LbaR -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPdB+wACgkQmmx57+YA GNnGQA/6A8St7bfxRtpWzmCY8D/fSo12vVWRsuTSFClsw+bsuciE+0xptaEbrSeJ yjSTOaSIaOrB2mCdXHcgr/QITggcykwrStFXVRWrtp6Bf/ePkrSR8AqHnopst494 p4oLUX9V1nreYmym85i76gmg81Ka1Qai40wrzTWtJamobeTt8ssspN7qNSkncCb3 VC3woUNG0b0zydoCZfETykG1aniJTXxyWPLjIJnmiopX269iOU7/J9fx2WMn90hE JDon4DjjdRz8Gu0xCQ9nsR06571XjtTU4Bk4A8JfXi/qeccvTsaBMmMeZ14hMtAU 4SjvqnxbsoPU9thQFqwXJrcRSDI6hiuUZpMONdBF5BtlsYy8auE9Fkr/boyUt97j u2z3G05nIO4dmnGfL028GMcbf9rLQgRskxeIgCyIBcj8MpjVONRXaYJqzIdyYy9q +70heMagnvAAqOgRtIOJ+C8Plm9FPYb+ubpWk6+KyKCZZ/DmA7TQ9hhd+oYsRfwa hCZgT3wyUSi7OBoc0yEsL9Sh36iqEcU7ZlyAD4/wo7hggc5gR88+rZyp3cOQNF8j CyYBIJkiHjVJQyMeha9uGTw1FgQM+7Eh3rJE1SAK/w0VtcEfuwQaiuk+xHCuZiAG 7sP/ga7KB6sjbrfP/Iz6HLuNCwHScrbn/5SzqH1YV9wauu+Kbxc= =Ce+W -----END PGP SIGNATURE----- Merge tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Two new 32bit SoC were added, the rv1126 and rk3128. New boards are thr rk3128-eval-board, and a number of rv1126-based compute modules from Edgeble AI. Also included are some dt-binding improvements with relevant Acks from maintainers when the changes touch these areas. * tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: phy: rename phy-rockchip-inno-usb2.yaml dt-bindings: soc: rockchip: grf: add rockchip,rk3288-dp-phy.yaml dt-bindings: phy: rockchip: convert rockchip-dp-phy.txt to yaml ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO ARM: dts: rockchip: Add Ethernet GMAC node for RV1126 ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126 dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6 ARM: dts: rockchip: add brcmf node to rk3066a-mk808 ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128 ARM: dts: rockchip: add rk3128-evb ARM: dts: rockchip: add rk3128 soc dtsi dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2) dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2 dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd. ARM: dts: rockchip: Add Rockchip RV1126 SoC ARM: dts: rockchip: Add Rockchip RV1126 pinctrl dt-bindings: arm: rockchip: Add pmu compatible for rv1126 Link: https://lore.kernel.org/r/5651506.31r3eYUQgx@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
739a7c29a7 |
i.MX arm device tree change for 6.3:
- New board support: SK-iMX53, DHCOM i.MX6ULL based boards. - Increase MMC maximum frequency for i.MXRT1050. - A series from Krzysztof Kozlowski to align LED node names with dtschema, and use use generic node name for rave-sp device. - Use new media bus type macros for i.MX device trees. - A series from Marcel Ziswiler to improve gpio-key for Colibri and Apalis device trees. - A series from Marek Vasut to drop interrupt-names from dma-apb device. - A series from Philippe Schenker to disable USB over-current for Colibri and Apalis boards. - A few other small corrections and random changes. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXJMsUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM42WggAioylsMA3X2/Wq8m19Gwm49Xc8DGa Fi12vlbkQy08LUFPH7/2vrE2AvhHcgc9MNnOTOyKBtG3ihqvFPFem3t15BZ8qdrt O30qJYX9+uJf5dA3CI2UodNVSXTbuZifDxil9OPFzkYZDCxR/v620R/EfVwlWEH+ QFEqxOmsTFkELTXeHzpw1y+DbaVt3SMRNxXiZfBvY0J7vXEyMu7BsAKeR+IXyjfV LYg8TZO9cB53axeikvv/Ebx1F5SCfb3OB9k/qDC20cBM7ENeZkTDweOs7OME17OB r6ROTmP0E452o5/yyU6Ib1dgjolrd+Cl9HMjY/qaotw0KqDCG62tP4wk1g== =Rwqo -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPYPq4ACgkQmmx57+YA GNnH0xAAmmsxql/31QrZygfwRbIBSGKCOEPb33ORm/ARd33k9d1+J2l65pPRu4y/ EVef3T+zgFeC++egP45qrFe25J/pCrD2iNapya5P0ybT/G0QeM4UsGr4JSsq95nC V1TNRlqlqL78QOfFIrtEbMtmZBuRn3oVg9KgJnxnBumDF+y6EEjdqNe9sUAbFJeN dnC7K3g4tsijbWmOZbYBCL9FBegDKVw6j9pPAcT6BQevJCsb4nHGJ1JzMuYjqXXl R8QzOIjGKicMuxTNpl1uVnyuaK2pmGiwa3r9fRlaz3eQxqSslHWNprcPLRnAZf2e votSsldneDzYCY0BQYGUEneSp7rIwWjWTTPfcvJXRj7mniP97+O8QyheK1P/YMOA a2KwriIexx7t6bZv/XMMrgjB9/04alEzpL/8AXXF7qglyaeoFis3eUiJQuRGD1OB wjmYyeCf9HoYeKwWbTLddzKGgT84iOoV3Wa786n05iVrHQBdMMGUlrV2zX5chBxg 2p6lqr4lmkSUdIDCoEfRy4YqJqnMrMUH90445w6rwTxxSE3S1bc/7sfDJkyFKr7J GJHb/wjHDAlojBWP51nKFinD0QcM0xM7RwYnQKqyVPpHKO9HXGvpAb6KBpaPqUBo aTVsYgFExPkKhzN93jiyfTJOJLoKM8KODas52bRYhahTDHRxKak= =1aTN -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm device tree change for 6.3: - New board support: SK-iMX53, DHCOM i.MX6ULL based boards. - Increase MMC maximum frequency for i.MXRT1050. - A series from Krzysztof Kozlowski to align LED node names with dtschema, and use use generic node name for rave-sp device. - Use new media bus type macros for i.MX device trees. - A series from Marcel Ziswiler to improve gpio-key for Colibri and Apalis device trees. - A series from Marek Vasut to drop interrupt-names from dma-apb device. - A series from Philippe Schenker to disable USB over-current for Colibri and Apalis boards. - A few other small corrections and random changes. * tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits) ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board ARM: dts: imx7s: correct iomuxc gpr mux controller cells ARM: dts: imx: use generic node name for rave-sp ARM: dts: ls1021a: Disable CAN nodes by default ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names ARM: dts: colibri-imx6ull: improve wake-up with gpio key ARM: dts: colibri-imx6: improve wake-up with gpio key ARM: dts: imx: e70k02: Add touchscreen ARM: dts: vfxxx: Swap SAI DMA order ARM: dts: freescale: Use new media bus type macros ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible ARM: dts: imx: Add support for SK-iMX53 board ARM: dts: imx7s: Drop dma-apb interrupt-names ARM: dts: imx6ul: Drop dma-apb interrupt-names ARM: dts: imx6sx: Drop dma-apb interrupt-names ARM: dts: imx6qdl: Drop dma-apb interrupt-names ARM: dts: mxs: Drop dma-apb interrupt-names ARM: dts: imx6qdl: use MAC-address from nvmem ... Link: https://lore.kernel.org/r/20230130023947.11780-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Christoph Niedermaier
|
addaaf0a18 |
ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board
Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. For this board a DHCOM i.MX6ULL SoM configuration without WiFi/BT is used. The interface is used for the SD card instead. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Christoph Niedermaier
|
bae9847e12 |
ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LED and a custom board-to-board expansion connector. For this board a DHCOM i.MX6ULL SoM configuration without WiFi/BT is used. The interface is used for the SD card instead. Make this adjustment by using a separate DT include file. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Christoph Niedermaier
|
611b6c891e |
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
Add support for DH electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with i.MX6ULL and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Jordan Chang
|
28cfb03afc |
ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC
Add initial version of device tree for Ufispace NCPlite platform which is equipped with AST2600-based BMC. Signed-off-by: Jordan Chang <jordan.chang@ufispace.com> Link: https://lore.kernel.org/r/20230119102102.73414-4-jordan.chang@ufispace.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
|
Markuss Broks
|
75b976c46c |
ARM: dts: exynos: Add Samsung Galaxy S5 (SM-G900H) board
Samsung Galaxy S5 (SM-G900H) was sold alongside Samsung Galaxy S5 with Snapdragon SoC, however the Exynos version features a 3G capable Intel modem instead of Qualcomm version featuring LTE modem. This phone is based on Exynos5422. Currently, the touchscreen, USB, eMMC and the PMIC are enabled in the device-tree. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20230123222329.13994-3-markuss.broks@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
Delphine CC Chiu
|
c3769d87f3 |
ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC
Add linux device tree entry related to greatlakes specific devices connected to BMC SoC. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20221111034828.2377-3-Delphine_CC_Chiu@Wiwynn.com Signed-off-by: Joel Stanley <joel@jms.id.au> |
||
|
Arnd Bergmann
|
61b7f8920b |
ARM: s3c: remove all s3c24xx support
The platform was deprecated in commit
|
||
|
Dmitry Baryshkov
|
0b8576d844 |
ARM: dts: imx: Add support for SK-iMX53 board
Add support for the StartKit sk-imx53 board, a simple development board with the iMX536A SoC. Tested and works: - UARTs - SPI - I2C - GPU - USB - uSD - NAND - Ethernet Not tested: - Display - VPU - capture Not yet working: - Sound Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Johan Jonker
|
51a0b607c0 |
ARM: dts: rockchip: add rk3128-evb
Add rk3128 eval board dts Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/56dbd2ab-dc2c-2f7d-0403-1d29dfd3c2e7@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Jagan Teki
|
2ec8afbc91 |
ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board
Neural Compute Module 2(Neu2) IO board is an industrial form factor evaluation board from Edgeble AI. General features: - microSD slot - MIPI DSI connector - 2x USB Host - 1x USB OTG - Ethernet - mini PCIe - Onboard PoE - RS485, RS232, CAN - Micro Phone array - Speaker - RTC battery slot - 40-pin expansion Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform. Add support for it. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20221129075424.189655-9-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Arnd Bergmann
|
da060ab86e |
More Qualcomm DTS updates for 6.2
This introduces support for the OnePlus One, on MSM8974Pro, and properly marks other Pro devices as compatible thereof. Also on MSM8974, the description of USB devices and their PHYs are cleaned up. On the binding side compatibles for recently added ARM and ARM64 boards are added. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmOQsccVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3F03AP/jGKvcHJbyi69JkzAcC7ClcJ8GB7 +FVPRckxHETRr2joiOeqTmhfaAU5wl/Nl8Gg8qEnbMWFL0629X74SRgwGe7wr/2O QGOVekN8jIFxNwrQ2kaNn2Rgr30Z3din1Niz8a7ceZyMAbTgNF4PTaOi8/6HKWE0 aaPmnBWYJEcMj47HkPTvZCqQ0WvbbLUe4Oi2zAIToZn4jj1W+rch9pUjARObXBx9 FiSAhZ5NORysl+2N70c/7auhUHvDlIAXt+lcXdgNzpmKtSM7UOnRUMjg5xFselix C6HuRX+NghXlVwnIuPxrt5xky3SHoMTYxoHC+B3FqHm9zsL7dKgW7PGs0WcBWVTo hs5Dz5WZjbDgxP5i9RbWwp6Ui8OOEfzrd9uJdQg0yvh64tYeWKoP4AJ+DR3nhF+S hVogHfaKdqtb1dlVGDJKKMt1zLVRirIrDtTNpRjyNqmuRxahGXzWLo8zzDOxMIYD MDBGvr3hHxWTJ94KzqBdx/7AR1yUComm8XJrJxy2ucWGawzFodtjqDz03iQGdj74 ntAUnQh9C4Zr5EJIHD766BnpA413K5Faw/yNrmpAIT3sx+Y8rgcLyP9ZK5WMC5G4 pN6aG5+a6yCctqVXA5elfShpRQrTdW0wajaWXIXcLzjjlA+GBAeUSbR5EPXHGChQ UkFLNjS0sZ2CPY1b =Ack4 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmORADsACgkQmmx57+YA GNnRvg//dIWi+VylQ8ZKGkxQZ3KoWSa7GG0dg7nKsQT8lpmI2cHmw3db6yAtSEZz kgNFF+vrqhabaZJ6ZDeGMj3RUOHbx//5Q2LbJF7yUyJNrQ+4AAktjdhb95nu0BIn 2VB3hIPq9ZMkqACumf7MBBsSqEQ62t8GFFpbAsB3OyIs7XPm7jI4Q33AaI+0JC7t 6jUivS2R2Y5BwXMagrryo2obqfSTANd1tt1DFntugfSXrG07zk3smzueTNJU4C6s YDH5pLy4NnfDweIrMNc2JIzVHLiyZw1tDbeRv0jYqA4pFbCNb/P9cezqleiQ9n04 nzPhf3PZbcL4xYFNMsefrpSwn5l0NSZCYLhnN5OwjFO5j4y94AC5eIi4GRgrY+GN 3OTsDMYPFbFTNH64QDKFUTJd+0kaii+sWukWKcZuHrpGZ6to6TjL2cr3c+W37Nes SbtFdZQt3l54V8+3NlE+UwAk426oLQhQ/3RtaS1MroP0HsIv0/z72FV6RBaDf2K7 9Zh9QQkw3sjFVpAyUEo2g6iWgx3rGuSTk5hf6Qd3FhIXF64n/NJ0s3YHD86y0e+Q kKTfAL/RUJKSv88rAPa2C/e8J3di17xlby4TefYlJSXQQMJ9kMs5eNwmf2uZYSE9 ScpzfiJTB9OJhC7YdPRkckEGpbVjYYyfxUmyc1qYqqGuSe7Lris= =v6Rn -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm DTS updates for 6.2 This introduces support for the OnePlus One, on MSM8974Pro, and properly marks other Pro devices as compatible thereof. Also on MSM8974, the description of USB devices and their PHYs are cleaned up. On the binding side compatibles for recently added ARM and ARM64 boards are added. * tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits) dt-bindings: arm: qcom: Add zombie ARM: dts: qcom: msm8974: Add OnePlus One dt-bindings: arm: qcom: Document oneplus,bacon device ARM: dts: qcom: msm8974: clean up USB nodes arm: dts: qcom: use qcom,msm8974pro for pro devices dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974 ARM: dts: qcom: align LED node names with dtschema dt-bindings: arm: qcom: Document additional sa8540p device dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224) dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible dt-bindings: arm: cpus: add qcom kryo 360 compatible ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema ARM: dts: qcom-msm8960: use define for interrupt constants dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema ARM: dts: qcom: msm8226: Add MMCC node dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards ... Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Julian Goldsmith
|
378f023133 |
ARM: dts: qcom: msm8974: Add OnePlus One
OnePlus One is a smartphone launched in 2014 and is based on the Snapdragon 801 SoC (-AC variant). Supported features: * ADSP * Charger * Coincell charger * Fuel gauge * Internal storage * Touchscreen * UART * USB * Wifi/Bluetooth Signed-off-by: Julian Goldsmith <julian@juliangoldsmith.com> Co-developed-by: Oleg Chernovskiy <kanedias@keemail.me> Signed-off-by: Oleg Chernovskiy <kanedias@keemail.me> Co-developed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz |
||
|
Arnd Bergmann
|
9490ae741d |
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.2, please pull the following: - Linus adds support for the D-Link DWL-8610AP which is based upon the BCM53016 SoC and the D-Link DIR-890L routers - Maxime resolves a long standing issue affecting Raspberry Pi devices by switching entirely over to the VPU firmware clock provider rather than mixing the "bare metal" clock driver and VPU - Rafal corrects the description of the TP-Link router partitions to use the "safeloader" partition parser - Stefan fixes a number of invalid underscores in the bcm283x DTS files and also moves the ACT LED into a separate DTS include file for better re-use - Krzysztof aligns the LEDs DT nodes to the proper schema format - Pierre adds missing cache properties to various SoCs -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmOFR/0ACgkQh9CWnEQH BwTjQQ/8Dlt/3xTRb5m2Llq2fnsb+D6NkMDlQB2R0NS+CQ3796iMUpHb2uXmboIn 9k4N7Vldk2mng/MEaCj5M14/5uwscsg8pDCAQq13ATfhBTTJKJJ4XfVfgyCJvdI8 +zWe9VFOZkIEO14ZkD4uQoLQTFJAETe7sSPJHwPNm/9IAX2xu0ktGaLteF6k8jfE ykx+KuW7e5D+hJdT7LbyDjWPMJBB7U374h1P0Z/WGfdoFFbkwN7UfPvdCxT8LBHD ErMchplqH1iW1zP28QplokO492PLmlXfc3JjaZ15kx3xr1YXZ6Z1lZ1Z93nZ9h+k l1qBuKmaelRYp0vofcBdvEzT97DChhslPTpxhK+biiF4Jrazcxi4GZnhFbpShI+o R1BpFNoP2/bX+ZOUC+In15GlWF77zxOe/rrNbwGIJY7Ht4riLaa7U08c4zi61sKM p61N8n7hh7Nml1k7IW7E0hjPWguJQkkKDilfctKp+iWq13IzcNJhkoWkH8pD9y83 MJh6EsHT5ZNlzILy6Ny0SdckTV+TKNPwl5CGXayVrGK7bxQ1XcUHg85Ag2oWOG0b nybNNSwqj7TQIROb9jrJ/6QxaxW2PXQjBnK+KJb8iCBCAdxd48AfhUL+I0mrEuvx gpswLInl0CyfuxypwO8wuT4XgjtMQi79rrDb3itCyfR54Rtq7e4= =6fCc -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOHh1sACgkQmmx57+YA GNmQLxAAilkBtZ8tT4Dn2FWerOWUIxrBO5heq1YrOQ3o0r4bOCCtV0Rza0g2N8NI IMdzLqfBluOVNohEv8UpZA6VmRfvHIFLbHeJExaSiNuxWjo9LDXhnjIPSnK5Tkst QGF0aqdPiS7RJRe8is3eR+w40qlf9Mj7UBqLPmMsjHK1qN9HxOkiZH4h6pXSbDWe pDHdomnwVbP6V/z/eWdoeglWFxbST9gHMj5Iwrmwl0Ftuu6DHPaUV5Wv3bBcz6l1 otGF8eWNVKi+dfmN1DxqqgjcOx1wvNqnx0TNT09MqKKkbCZmiygOrTXzZMw/I7dX 5bZ/ycMARjkUcS+eLw2H+TC/YSgyF82FRV5Z/h+OKHwVtDhLOWBlOvAfD01LyXPv 8iO3CYOOMt7+AVhuPb/e7noHXUN7yAiNGyI3IU9n/enlgWqxxGGBguPZGiFLpETH auwj+/qq/lZG68//LmfvCSbikhTtmnflMIR50yKTtMAKAFNZvw544dVM9doVGpbw aNhkntoB1R99KiCJoaV9D8h8qKMwIQxZbMdTNENUbpDXUNsEtm4+/rOCS0X+CFy+ sxXTJ7G/DdnejluhKAI6e2KJ0is4x4fXy+vmT+AqGPaabjz9utKVKnXaOYHZTY1X DRVntuqQZtZjx5COvZPO2qxlecJ26+K6maJmS5UqbNGCwQxgGG0= =vkEv -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.2, please pull the following: - Linus adds support for the D-Link DWL-8610AP which is based upon the BCM53016 SoC and the D-Link DIR-890L routers - Maxime resolves a long standing issue affecting Raspberry Pi devices by switching entirely over to the VPU firmware clock provider rather than mixing the "bare metal" clock driver and VPU - Rafal corrects the description of the TP-Link router partitions to use the "safeloader" partition parser - Stefan fixes a number of invalid underscores in the bcm283x DTS files and also moves the ACT LED into a separate DTS include file for better re-use - Krzysztof aligns the LEDs DT nodes to the proper schema format - Pierre adds missing cache properties to various SoCs * tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux: arm: dts: Update cache properties for broadcom ARM: dts: broadcom: align LED node names with dtschema ARM: dts: bcm283x: Move ACT LED into separate dtsi ARM: dts: bcm283x: Fix underscores in node names ARM: dts: BCM5301X: Correct description of TP-Link partitions ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L dt-bindings: ARM: add bindings for the D-Link DIR-890L ARM: dts: bcm2835-rpi: Use firmware clocks for display ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP dt-bindings: ARM: add bindings for the D-Link DWL-8610AP Link: https://lore.kernel.org/r/20221129191755.542584-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
c93a25d775 |
mvebu dt for 6.2 (part 1)
Fix assigned-addresses for every PCIe Root Port Align LED node names with dtschema Add a new kirkwood based board: Zyxel NSA310S Fix compatible string for gpios for Armada 38x and 39x Add interrupts for watchdog on Armada XP Turris Omnia (Armada 385 based): - Add switch port 6 node - Add ethernet aliases Switch to using gpiod API in pm-board code -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCY4QDYQAKCRALBhiOFHI7 1WAEAJ9oLKs8LbLgO7CqgfY9j4g/bMWlMACfSxssqM2DqLd3EADd1y/JRRhwFaU= =iXv9 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOHeb0ACgkQmmx57+YA GNlkixAAjvYjGVuQgStoWcrnT/fL8qatMCtXxvgNDT8Tq0zil5l7I7sLS7CIvc/j nkRdgtP62xBafYVd0BdP9vUWmW9lzTHgxitsxU5lE/J5+65xtnnBpfpd1cPg4r4k kv4D2UmIbiAQL7JrvVB3nL36K8tNN1PSN+pOTrJ9zccyjrMRGXgYsCF9zZRJSVyB Rn39xJM3gFawlFkSRJDAwcByck/8sGd7bhGCgZq5SeSQ1dDuy7w0PP06QoXa8oqe 74EfcsDpP/2EbWKHjOSick4JDC6fiMM+i3G3h9MuZbpRemY2SxABHtaVdYh3G2yJ v8VRR5lZLK6A4iOYd2IDw27kHNh30kX6kHLhAYaXqBRc4ZTElSyo5V7xCWJIJ28T I6HunSsbBls1HXqkkMeow73VHoFe4ec1PNA5ToSrSzxqxUMvbAPza9Wflm+PktE7 eKajK+IIsBXwI5JtXAnF+uAMVuhBcqDnQrrOzbedts2cA14Hm/LG0dmb8BE9bDJR npv1NpZBP/xg5l98FFgaq06He6gcY7vlT3VyGUj3N+VYDQq0LFA0WK+pV1Z+ORYS vyfHANvhJ03FgFX2396rfkzXT7j8fhmbaGi+WvdPa2e39c5BQ6a2aP/G6iCmWWpe 7wg7iXE2npepBtj7PGOC9DX/xZ2nKjaR/fJMHc5wu46RnJO7JII= =Vk4K -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.2 (part 1) Fix assigned-addresses for every PCIe Root Port Align LED node names with dtschema Add a new kirkwood based board: Zyxel NSA310S Fix compatible string for gpios for Armada 38x and 39x Add interrupts for watchdog on Armada XP Turris Omnia (Armada 385 based): - Add switch port 6 node - Add ethernet aliases Switch to using gpiod API in pm-board code * tag 'mvebu-dt-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: armada-xp: add interrupts for watchdog ARM: dts: armada: align LED node names with dtschema ARM: mvebu: switch to using gpiod API in pm-board code ARM: dts: armada-39x: Fix compatible string for gpios ARM: dts: armada-38x: Fix compatible string for gpios ARM: dts: turris-omnia: Add switch port 6 node ARM: dts: turris-omnia: Add ethernet aliases ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port ARM: dts: kirkwood: Add Zyxel NSA310S board Link: https://lore.kernel.org/r/87cz979adf.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |