-fmacro-prefix-map only affects __FILE__ and __BASE_FILE__.
Other references, for example in debug information, are not affected.
This makes handling of file references in the compiler outputs harder to
use and creates problems for reproducible builds.
Switch to -ffile-prefix map which affects all references.
Also drop the documentation section advising manual specification of
-fdebug-prefix-map for reproducible builds, as it is not necessary
anymore.
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/lkml/c49cc967294f9a3a4a34f69b6a8727a6d3959ed8.camel@decadent.org.uk/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Meanwhile explicitly state that the headers are uapi headers.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The imperative paradigm used to build vmlinux, extract some info from it
or perform some checks on it, and subsequently modify it again goes
against the declarative paradigm that is usually employed for defining
make rules.
In particular, the Makefile.postlink files that consume their input via
an output rule result in some dodgy logic in the decompressor makefiles
for RISC-V and x86, given that the vmlinux.relocs input file needed to
generate the arch-specific relocation tables may not exist or be out of
date, but cannot be constructed using the ordinary Make dependency based
rules, because the info needs to be extracted while vmlinux is in its
ephemeral, non-stripped form.
So instead, for architectures that require the static relocations that
are emitted into vmlinux when passing --emit-relocs to the linker, and
are subsequently stripped out again, introduce an intermediate vmlinux
target called vmlinux.unstripped, and organize the reset of the build
logic accordingly:
- vmlinux.unstripped is created only once, and not updated again
- build rules under arch/*/boot can depend on vmlinux.unstripped without
running the risk of the data disappearing or being out of date
- the final vmlinux generated by the build is not bloated with static
relocations that are never needed again after the build completes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some architectures build vmlinux with static relocations preserved, but
strip them again from the final vmlinux image. Arch specific tools
consume these static relocations in order to construct relocation tables
for KASLR.
The fact that vmlinux is created, consumed and subsequently updated goes
against the typical, declarative paradigm used by Make, which is based
on rules and dependencies. So as a first step towards cleaning this up,
introduce a Kconfig symbol to declare that the arch wants to consume the
static relocations emitted into vmlinux. This will be wired up further
in subsequent patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remap source path prefixes in all output, including compiler
diagnostics, debug information, macro expansions, etc.
This removes a few absolute paths from the binary and also makes it
possible to use core::panic::Location properly.
Equivalent to the same configuration done for C sources in
commit 1d3730f001 ("kbuild: support -fmacro-prefix-map for external
modules") and commit a73619a845 ("kbuild: use -fmacro-prefix-map to
make __FILE__ a relative path").
Link: https://doc.rust-lang.org/rustc/command-line-arguments.html#--remap-path-prefix-remap-source-names-in-output
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
userprogs sometimes need access to UAPI headers.
This is currently not possible for Usermode Linux, as UM is only
a pseudo architecture built on top of a regular architecture and does
not have its own UAPI.
Instead use the UAPI headers from the underlying regular architecture.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit e27128db62 ("kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to
KBUILD_EXTRA_WARN") renamed KBUILD_ENABLE_EXTRA_GCC_CHECKS in 2019.
The migration in downstream code should be complete.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The -fzero-init-padding-bits=all option is not a warning flag, so
defining it in scripts/Makefile.extrawarn is inconsistent.
Move it to the top-level Makefile for consistency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db27 ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
While WAIT_FOR_ENDBR is specified to be a full speculation stop; it
has been shown that some implementations are 'leaky' to such an extend
that speculation can escape even the FineIBT preamble.
To deal with this, add additional hardening to the FineIBT preamble.
Notably, using a new LLVM feature:
e223485c9b
which encodes the number of arguments in the kCFI preamble's register.
Using this register<->arity mapping, have the FineIBT preamble CALL
into a stub clobbering the relevant argument registers in the
speculative case.
Scott sayeth thusly:
Microarchitectural attacks such as Branch History Injection (BHI) and
Intra-mode Branch Target Injection (IMBTI) [1] can cause an indirect
call to mispredict to an adversary-influenced target within the same
hardware domain (e.g., within the kernel). Instructions at the
mispredicted target may execute speculatively and potentially expose
kernel data (e.g., to a user-mode adversary) through a
microarchitectural covert channel such as CPU cache state.
CET-IBT [2] is a coarse-grained control-flow integrity (CFI) ISA
extension that enforces that each indirect call (or indirect jump)
must land on an ENDBR (end branch) instruction, even speculatively*.
FineIBT is a software technique that refines CET-IBT by associating
each function type with a 32-bit hash and enforcing (at the callee)
that the hash of the caller's function pointer type matches the hash
of the callee's function type. However, recent research [3] has
demonstrated that the conditional branch that enforces FineIBT's hash
check can be coerced to mispredict, potentially allowing an adversary
to speculatively bypass the hash check:
__cfi_foo:
ENDBR64
SUB R10d, 0x01234567
JZ foo # Even if the hash check fails and ZF=0, this branch could still mispredict as taken
UD2
foo:
...
The techniques demonstrated in [3] require the attacker to be able to
control the contents of at least one live register at the mispredicted
target. Therefore, this patch set introduces a sequence of CMOV
instructions at each indirect-callable target that poisons every live
register with data that the attacker cannot control whenever the
FineIBT hash check fails, thus mitigating any potential attack.
The security provided by this scheme has been discussed in detail on
an earlier thread [4].
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
[2] Intel Software Developer's Manual, Volume 1, Chapter 18
[3] https://www.vusec.net/projects/native-bhi/
[4] https://lore.kernel.org/lkml/20240927194925.707462984@infradead.org/
*There are some caveats for certain processors, see [1] for more info
Suggested-by: Scott Constable <scott.d.constable@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250224124200.820402212@infradead.org
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469 ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
I simply removed the offending MAKEFLAGS=<value>.
[1]: https://savannah.gnu.org/bugs/?62469
[2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags
Fixes: ea01fa9f63 ("tools: Connect to the kernel build system")
Fixes: a50e433327 ("perf tools: Honor parallel jobs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few
cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using only
stable Rust features. In particular, previously we were using the
unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize',
and now we will use the new 'derive_coerce_pointee' one, which is on
track to stabilization. This new feature is a macro that essentially
expands into code that internally uses the unstable features that we
were using before, without having to expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'.
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups.
-----BEGIN PGP SIGNATURE-----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=VLNX
-----END PGP SIGNATURE-----
Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
These are flags to be passed when linking proc macros for the Rust
toolchain. If unset, it defaults to $(KBUILD_HOSTLDFLAGS).
This is needed because the list of flags to link hostprogs is not
necessarily the same as the list of flags used to link libmacros.so.
When we build proc macros, we need the latter, not the former (e.g. when
using a Rust compiler binary linked to a different C library than host
programs).
To distinguish between the two, introduce this new variable to stand
out from KBUILD_HOSTLDFLAGS used to link other host progs.
Signed-off-by: HONG Yifan <elsk@google.com>
Link: https://lore.kernel.org/r/20241017210430.2401398-2-elsk@google.com
[ v3:
- `export`ed the variable. Otherwise it would not be visible in
`rust/Makefile`.
- Removed "additional" from the documentation and commit message,
since this actually replaces the other flags, unlike other cases.
- Added example of use case to documentation and commit message.
Thanks Alice for the details on what Google needs!
- Instead of `HOSTLDFLAGS`, used `KBUILD_HOSTLDFLAGS` as the fallback
to preserve the previous behavior as much as possible, as discussed
with Alice/Yifan. Thus moved the variable down too (currently we
do not modify `KBUILD_HOSTLDFLAGS` elsewhere) and avoided
mentioning `HOSTLDFLAGS` directly in the documentation.
- Fixed documentation header formatting.
- Reworded slightly.
- Miguel ]
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: HONG Yifan <elsk@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241112184455.855133-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Because the `macros` crate exposes procedural macros, it must be
compiled as a dynamic library (so it can be loaded by the compiler at
compile-time).
Before this change the resulting artifact was always named
`libmacros.so`, which works on hosts where this matches the naming
convention for dynamic libraries. However the proper name on macOS would
be `libmacros.dylib`.
This turns out to matter even when the dependency is passed with a path
(`--extern macros=path/to/libmacros.so` rather than `--extern macros`)
because rustc uses the file name to infer the type of the library (see
link). This is because there's no way to specify both the path to and
the type of the external library via CLI flags. The compiler could
speculatively parse the file to determine its type, but it does not do
so today.
This means that libraries that match neither rustc's naming convention
for static libraries nor the platform's naming convention for dynamic
libraries are *rejected*.
The only solution I've found is to follow the host platform's naming
convention. This patch does that by querying the compiler to determine
the appropriate name for the artifact. This allows the kernel to build
with CONFIG_RUST=y on macOS.
Link: https://github.com/rust-lang/rust/blob/d829780/compiler/rustc_metadata/src/locator.rs#L728-L752
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241216-b4-dylib-host-macos-v7-1-cfc507681447@gmail.com
[ Added `MAKEFLAGS=`s to avoid jobserver warnings. Removed space.
Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is new API which caters to the following requirements:
- Pack or unpack a large number of fields to/from a buffer with a small
code footprint. The current alternative is to open-code a large number
of calls to pack() and unpack(), or to use packing() to reduce that
number to half. But packing() is not const-correct.
- Use unpacked numbers stored in variables smaller than u64. This
reduces the rodata footprint of the stored field arrays.
- Perform error checking at compile time, rather than runtime, and return
void from the API functions. Because the C preprocessor can't generate
variable length code (loops), this is a bit tricky to do with macros.
To handle this, implement macros which sanity check the packed field
definitions based on their size. Finally, a single macro with a chain of
__builtin_choose_expr() is used to select the appropriate macros. We
enforce the use of ascending or descending order to avoid O(N^2) scaling
when checking for overlap. Note that the macros are written with care to
ensure that the compilers can correctly evaluate the resulting code at
compile time. In particular, care was taken with avoiding too many nested
statement expressions. Nested statement expressions trip up some
compilers, especially when passing down variables created in previous
statement expressions.
There are two key design choices intended to keep the overall macro code
size small. First, the definition of each CHECK_PACKED_FIELDS_N macro is
implemented recursively, by calling the N-1 macro. This avoids needing
the code to repeat multiple times.
Second, the CHECK_PACKED_FIELD macro enforces that the fields in the
array are sorted in order. This allows checking for overlap only with
neighboring fields, rather than the general overlap case where each field
would need to be checked against other fields.
The overlap checks use the first two fields to determine the order of the
remaining fields, thus allowing either ascending or descending order.
This enables drivers the flexibility to keep the fields ordered in which
ever order most naturally fits their hardware design and its associated
documentation.
The CHECK_PACKED_FIELDS macro is directly called from within pack_fields
and unpack_fields, ensuring that all drivers using the API receive the
benefits of the compile-time checks. Users do not need to directly call
any of the macros directly.
The CHECK_PACKED_FIELDS and its helper macros CHECK_PACKED_FIELDS_(0..50)
are generated using a simple C program in scripts/gen_packed_field_checks.c
This program can be compiled on demand and executed to generate the
macro code in include/linux/packing.h. This will aid in the event that a
driver needs more than 50 fields. The generator can be updated with a new
size, and used to update the packing.h header file. In practice, the ice
driver will need to support 27 fields, and the sja1105 driver will need
to support 0 fields. This on-demand generation avoids the need to modify
Kbuild. We do not anticipate the maximum number of fields to grow very
often.
- Reduced rodata footprint for the storage of the packed field arrays.
To that end, we have struct packed_field_u8 and packed_field_u16, which
define the fields with the associated type. More can be added as
needed (unlikely for now). On these types, the same generic pack_fields()
and unpack_fields() API can be used, thanks to the new C11 _Generic()
selection feature, which can call pack_fields_u8() or pack_fields_16(),
depending on the type of the "fields" array - a simplistic form of
polymorphism. It is evaluated at compile time which function will actually
be called.
Over time, packing() is expected to be completely replaced either with
pack() or with pack_fields().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-3-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----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=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
Replace lz4c with lz4 for kernel image compression.
Although lz4 and lz4c are functionally similar, lz4c has been deprecated
upstream since 2018. Since as early as Ubuntu 16.04 and Fedora 25, lz4
and lz4c have been packaged together, making it safe to update the
requirement from lz4c to lz4.
Consequently, some distributions and build systems, such as OpenEmbedded,
have fully transitioned to using lz4. OpenEmbedded core adopted this
change in commit fe167e082cbd ("bitbake.conf: require lz4 instead of
lz4c"), causing compatibility issues when building the mainline kernel
in the latest OpenEmbedded environment, as seen in the errors below.
This change also updates the LZ4 compression commands to make it backward
compatible by replacing stdin and stdout with the '-' option, due to some
unclear reason, the stdout keyword does not work for lz4 and '-' works for
both. In addition, this modifies the legacy '-c1' with '-9' which is also
compatible with both. This fixes the mainline kernel build failures with
the latest master OpenEmbedded builds associated with the mentioned
compatibility issues.
LZ4 arch/arm/boot/compressed/piggy_data
/bin/sh: 1: lz4c: not found
...
...
ERROR: oe_runmake failed
Link: https://github.com/lz4/lz4/pull/553
Suggested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This rule is unnecessary because you can generate foo/bar.symtypes
as a side effect using:
$ make KBUILD_SYMTYPES=1 foo/bar.o
While compiling *.o is slower than preprocessing, the impact is
negligible. I prioritize keeping the code simpler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Unless an explicit O= option is provided, external module builds must
start from the kernel directory.
This can be achieved by using the -C option:
$ make -C /path/to/kernel M=/path/to/external/module
This commit allows starting external module builds from any directory,
so you can also do the following:
$ make -f /path/to/kernel/Makefile M=/path/to/external/module
The key difference is that the -C option changes the working directory
and parses the Makefile located there, while the -f option only
specifies the Makefile to use.
As shown in the examples in Documentation/kbuild/modules.rst, external
modules usually have a wrapper Makefile that allows you to build them
without specifying any make arguments. The Makefile typically contains
a rule as follows:
KDIR ?= /path/to/kernel
default:
$(MAKE) -C $(KDIR) M=$(CURDIR) $(MAKECMDGOALS)
The log will appear as follows:
$ make
make -C /path/to/kernel M=/path/to/external/module
make[1]: Entering directory '/path/to/kernel'
make[2]: Entering directory '/path/to/external/module'
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
make[2]: Leaving directory '/path/to/external/module'
make[1]: Leaving directory '/path/to/kernel'
This changes the working directory twice because the -C option first
switches to the kernel directory, and then Kbuild internally recurses
back to the external module directory.
With this commit, the wrapper Makefile can directly include the kernel
Makefile:
KDIR ?= /path/to/kernel
export KBUILD_EXTMOD := $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
include $(KDIR)/Makefile
This avoids unnecessary sub-make invocations:
$ make
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
When Kbuild starts building in a separate output directory, it generates
a wrapper Makefile, allowing you to invoke 'make' from the output
directory.
This commit makes it more convenient, so you can invoke 'make' without
M= or MO=.
First, you need to build external modules in a separate directory:
$ make M=/path/to/module/source/dir MO=/path/to/module/build/dir
Once the wrapper Makefile is generated in /path/to/module/build/dir,
you can proceed as follows:
$ cd /path/to/module/build/dir
$ make
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Keep the consistent behavior when this Makefile is invoked from another
directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
This commit makes -fmacro-prefix-map work for external modules built in
a separate output directory. It improves the reproducibility of external
modules and provides the benefits described in commit a73619a845
("kbuild: use -fmacro-prefix-map to make __FILE__ a relative path").
When building_out_of_srctree is not defined (e.g., when the kernel or
external module is built in the source directory), this option is
unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
There has been a long-standing request to support building external
modules in a separate build directory.
This commit introduces a new environment variable, KBUILD_EXTMOD_OUTPUT,
and its shorthand Make variable, MO.
A simple usage:
$ make -C <kernel-dir> M=<module-src-dir> MO=<module-build-dir>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
With the previous changes, $(extmod_prefix), $(MODORDER), and
$(MODULES_NSDEPS) are constant. (empty, modules.order, and
modules.nsdeps, respectively).
Remove these variables and hard-code their values.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Currently, Kbuild always operates in the output directory of the kernel,
even when building external modules. This increases the risk of external
module Makefiles attempting to write to the kernel directory.
This commit switches the working directory to the external module
directory, allowing the removal of the $(KBUILD_EXTMOD)/ prefix from
some build artifacts.
The command for building external modules maintains backward
compatibility, but Makefiles that rely on working in the kernel
directory may break. In such cases, $(objtree) and $(srctree) should
be used to refer to the output and source directories of the kernel.
The appearance of the build log will change as follows:
[Before]
$ make -C /path/to/my/linux M=/path/to/my/externel/module
make: Entering directory '/path/to/my/linux'
CC [M] /path/to/my/externel/module/helloworld.o
MODPOST /path/to/my/externel/module/Module.symvers
CC [M] /path/to/my/externel/module/helloworld.mod.o
CC [M] /path/to/my/externel/module/.module-common.o
LD [M] /path/to/my/externel/module/helloworld.ko
make: Leaving directory '/path/to/my/linux'
[After]
$ make -C /path/to/my/linux M=/path/to/my/externel/module
make: Entering directory '/path/to/my/linux'
make[1]: Entering directory '/path/to/my/externel/module'
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
make[1]: Leaving directory '/path/to/my/externel/module'
make: Leaving directory '/path/to/my/linux'
Printing "Entering directory" twice is cumbersome. This will be
addressed later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Highlights for this merge window:
* The whole caching of module code into huge pages by Mike Rapoport is going
in through Andrew Morton's tree due to some other code dependencies. That's
really the biggest highlight for Linux kernel modules in this release. With
it we share huge pages for modules, starting off with x86. Expect to see that
soon through Andrew!
* Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch series
I dropped his vmlinux.lds.h change at Masahiro's request as he would
prefer this to be specified in asm code [0].
[0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a
* Matthew Maurer and Sami Tolvanen have been tag teaming to help
get us closer to a modversions for Rust. In this cycle we take in
quite a lot of the refactoring for ELF validation. I expect modversions
for Rust will be merged by v6.14 as that code is mostly ready now.
* Adds a new modules selftests: kallsyms which helps us tests find_symbol()
and the limits of kallsyms on Linux today.
* We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
- https://patchwork.kernel.org/project/linux-modules/list/
- https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.md
- https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.md
- https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md
If you want to help avoid Linux kernel modules regressions, now its simple,
just add a new Linux modules sefltests under tools/testing/selftests/module/
That is it. All new selftests will be used and leveraged automatically by
the CI.
-----BEGIN PGP SIGNATURE-----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=Ny84
-----END PGP SIGNATURE-----
Merge tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Luis Chamberlain:
- The whole caching of module code into huge pages by Mike Rapoport is
going in through Andrew Morton's tree due to some other code
dependencies. That's really the biggest highlight for Linux kernel
modules in this release. With it we share huge pages for modules,
starting off with x86. Expect to see that soon through Andrew!
- Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch
series I dropped his vmlinux.lds.h change at Masahiro's request as he
would prefer this to be specified in asm code [0].
[0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a
- Matthew Maurer and Sami Tolvanen have been tag teaming to help get us
closer to a modversions for Rust. In this cycle we take in quite a
lot of the refactoring for ELF validation. I expect modversions for
Rust will be merged by v6.14 as that code is mostly ready now.
- Adds a new modules selftests: kallsyms which helps us tests
find_symbol() and the limits of kallsyms on Linux today.
- We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
https://patchwork.kernel.org/project/linux-modules/list/https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.mdhttps://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.mdhttps://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md
If you want to help avoid Linux kernel modules regressions, now its
simple, just add a new Linux modules sefltests under
tools/testing/selftests/module/ That is it. All new selftests will be
used and leveraged automatically by the CI.
* tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
tests/module/gen_test_kallsyms.sh: use 0 value for variables
scripts: Remove export_report.pl
selftests: kallsyms: add MODULE_DESCRIPTION
selftests: add new kallsyms selftests
module: Reformat struct for code style
module: Additional validation in elf_validity_cache_strtab
module: Factor out elf_validity_cache_strtab
module: Group section index calculations together
module: Factor out elf_validity_cache_index_str
module: Factor out elf_validity_cache_index_sym
module: Factor out elf_validity_cache_index_mod
module: Factor out elf_validity_cache_index_info
module: Factor out elf_validity_cache_secstrings
module: Factor out elf_validity_cache_sechdrs
module: Factor out elf_validity_ehdr
module: Take const arg in validate_section_offset
modules: Add missing entry for __ex_table
modules: Ensure 64-bit alignment on __ksymtab_* sections
$(KBUILD_OUTPUT) specifies the output directory of kernel builds.
Use a more generic name, 'output', to better reflect this code hunk in
the context of external module builds.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
'objtree' refers to the top of the output directory of kernel builds.
Rename abs_objtree to a more generic name, to better reflect its use in
the context of external module builds.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
$(objtree) refers to the top of the output directory of kernel builds.
This commit adds the explicit $(objtree)/ prefix to build artifacts
needed for building external modules.
This change has no immediate impact, as the top-level Makefile
currently defines:
objtree := .
This commit prepares for supporting the building of external modules
in a different directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Kbuild changes the working directory until it matches $(abs_objtree).
When $(need-sub-make) is empty, $(abs_objtree) is the same as $(CURDIR).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Add the build support for using Clang's Propeller optimizer. Like
AutoFDO, Propeller uses hardware sampling to gather information
about the frequency of execution of different code paths within a
binary. This information is then used to guide the compiler's
optimization decisions, resulting in a more efficient binary.
The support requires a Clang compiler LLVM 19 or later, and the
create_llvm_prof tool
(https://github.com/google/autofdo/releases/tag/v0.30.1). This
commit is limited to x86 platforms that support PMU features
like LBR on Intel machines and AMD Zen3 BRS.
Here is an example workflow for building an AutoFDO+Propeller
optimized kernel:
1) Build the kernel on the host machine, with AutoFDO and Propeller
build config
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
then
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile>
“<autofdo_profile>” is the profile collected when doing a non-Propeller
AutoFDO build. This step builds a kernel that has the same optimization
level as AutoFDO, plus a metadata section that records basic block
information. This kernel image runs as fast as an AutoFDO optimized
kernel.
2) Install the kernel on test/production machines.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
# To see if Zen3 support LBR:
$ cat proc/cpuinfo | grep " brs"
# To see if Zen4 support LBR:
$ cat proc/cpuinfo | grep amd_lbr_v2
# If the result is yes, then collect the profile using:
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) Generate Propeller profile:
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=propeller --propeller_output_module_name \
--out=<propeller_profile_prefix>_cc_profile.txt \
--propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
“create_llvm_prof” is the profile conversion tool, and a prebuilt
binary for linux can be found on
https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build
from source).
"<propeller_profile_prefix>" can be something like
"/home/user/dir/any_string".
This command generates a pair of Propeller profiles:
"<propeller_profile_prefix>_cc_profile.txt" and
"<propeller_profile_prefix>_ld_profile.txt".
6) Rebuild the kernel using the AutoFDO and Propeller profile files.
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
and
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \
CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a frequent
source of review comments, thus having the compiler guide new
developers on where they are expected (and where not) is very nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up locally
ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance, our
first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is the
support to write custom types that can be used as 'self', i.e. as
receivers, since the kernel needs to write types such as 'Arc' that
common userspace Rust would not. 'arbitrary_self_types' has been
accepted to become stable, and this is one of the steps required to
get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize' instead
of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some distributions
backported the fix (e.g. Debian -- thanks!). All major distributions
we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the extension
traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type 'T'
that is also generic over an allocator and considers the kernel's GFP
flags) and its shorthand aliases '{K,V,KV}Box'. Add 'ArrayLayout'
type. Add 'Vec' (a contiguous growable array type) and its shorthand
aliases '{K,V,KV}Vec', including iterator support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=Kn7b
-----END PGP SIGNATURE-----
Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
In beta Clippy (i.e. Rust 1.83.0), the `needless_lifetimes` lint has
been extended [1] to suggest eliding `impl` lifetimes, e.g.
error: the following explicit lifetimes could be elided: 'a
--> rust/kernel/list.rs:647:6
|
647 | impl<'a, T: ?Sized + ListItem<ID>, const ID: u64> FusedIterator for Iter<'a, T, ID> {}
| ^^ ^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
= note: `-D clippy::needless-lifetimes` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::needless_lifetimes)]`
help: elide the lifetimes
|
647 - impl<'a, T: ?Sized + ListItem<ID>, const ID: u64> FusedIterator for Iter<'a, T, ID> {}
647 + impl<T: ?Sized + ListItem<ID>, const ID: u64> FusedIterator for Iter<'_, T, ID> {}
A possibility would have been to clean them -- the RFC patch [2] did
this, while asking if we wanted these cleanups. There is an open issue
[3] in Clippy about being able to differentiate some of the new cases,
e.g. those that do not involve introducing `'_`. Thus it seems others
feel similarly.
Thus, for the time being, we decided to `allow` the lint.
Link: https://github.com/rust-lang/rust-clippy/pull/13286 [1]
Link: https://lore.kernel.org/rust-for-linux/20241012231300.397010-1-ojeda@kernel.org/ [2]
Link: https://github.com/rust-lang/rust-clippy/issues/13514 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241116181538.369355-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the build support for using Clang's AutoFDO. Building the kernel
with AutoFDO does not reduce the optimization level from the
compiler. AutoFDO uses hardware sampling to gather information about
the frequency of execution of different code paths within a binary.
This information is then used to guide the compiler's optimization
decisions, resulting in a more efficient binary. Experiments
showed that the kernel can improve up to 10% in latency.
The support requires a Clang compiler after LLVM 17. This submission
is limited to x86 platforms that support PMU features like LBR on
Intel machines and AMD Zen3 BRS. Support for SPE on ARM 1,
and BRBE on ARM 1 is part of planned future work.
Here is an example workflow for AutoFDO kernel:
1) Build the kernel on the host machine with LLVM enabled, for example,
$ make menuconfig LLVM=1
Turn on AutoFDO build config:
CONFIG_AUTOFDO_CLANG=y
With a configuration that has LLVM enabled, use the following
command:
scripts/config -e AUTOFDO_CLANG
After getting the config, build with
$ make LLVM=1
2) Install the kernel on the test machine.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
For Zen3:
$ cat proc/cpuinfo | grep " brs"
For Zen4:
$ cat proc/cpuinfo | grep amd_lbr_v2
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) To generate an AutoFDO profile, two offline tools are available:
create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part
of the AutoFDO project and can be found on GitHub
(https://github.com/google/autofdo), version v0.30.1 or later. The
llvm_profgen tool is included in the LLVM compiler itself. It's
important to note that the version of llvm_profgen doesn't need to
match the version of Clang. It needs to be the LLVM 19 release or
later, or from the LLVM trunk.
$ llvm-profgen --kernel --binary=<vmlinux> --perfdata=<perf_file> \
-o <profile_file>
or
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=extbinary --out=<profile_file>
Note that multiple AutoFDO profile files can be merged into one via:
$ llvm-profdata merge -o <profile_file> <profile_1> ... <profile_n>
6) Rebuild the kernel using the AutoFDO profile file with the same config
as step 1, (Note CONFIG_AUTOFDO_CLANG needs to be enabled):
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is no need to prune the rust/alloc directory because it was
removed by commit 9d0441bab7 ("rust: alloc: remove our fork of the
`alloc` crate").
There is no need to prune the rust/test directory because no '*.rs'
files are generated within it.
To avoid forking the 'grep -Fv generated' process, filter out generated
files using the option, ! -name '*generated*'.
Now that the '-path ... -prune' option is no longer used, there is no
need to use the absolute path. Searching in $(srctree), which can be
a relative path, is sufficient.
The comment mentions the use case where $(srctree) is '..', that is,
$(objtree) is a sub-directory of $(srctree). In this scenario, all
'*.rs' files under $(objtree) are generated files and filters out by
the '*generated*' pattern.
Add $(RCS_FIND_IGNORE) as a shortcut. Although I do not believe '*.rs'
files would exist under the .git directory, there is no need for the
'find' command to traverse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
This script has been broken for 5 years with no user complaints.
It first had its .mod.c parser broken in commit a3d0cb04f7 ("modpost:
use __section in the output to *.mod.c"). Later, it had its object file
enumeration broken in commit f65a486821 ("kbuild: change module.order
to list *.o instead of *.ko"). Both of these changes sat for years with
no reports.
Rather than reviving this script as we make further changes to `.mod.c`,
this patch gets rid of it because it is clearly unused.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Some architectures embed boot DTBs in vmlinux. A potential issue for
these architectures is a race condition during parallel builds because
Kbuild descends into arch/*/boot/dts/ twice.
One build thread is initiated by the 'dtbs' target, which is a
prerequisite of the 'all' target in the top-level Makefile:
ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
endif
For architectures that support the built-in boot dtb, arch/*/boot/dts/
is visited also during the ordinary directory traversal in order to
build obj-y objects that wrap DTBs.
Since these build threads are unaware of each other, they can run
simultaneously during parallel builds.
This commit introduces a generic build rule to scripts/Makefile.vmlinux
to support embedded boot DTBs in a race-free way. Architectures that
want to use this rule need to select CONFIG_GENERIC_BUILTIN_DTB.
After the migration, Makefiles under arch/*/boot/dts/ will be visited
only once to build only *.dtb files.
This change also aims to unify the CONFIG options used for built-in DTBs
support. Currently, different architectures use different CONFIG options
for the same purposes.
With this commit, the CONFIG options will be unified as follows:
- CONFIG_GENERIC_BUILTIN_DTB
This enables the generic rule for built-in boot DTBs. This will be
renamed to CONFIG_BUILTIN_DTB after all architectures migrate to the
generic rule.
- CONFIG_BUILTIN_DTB_NAME
This specifies the path to the embedded DTB.
(relative to arch/*/boot/dts/)
- CONFIG_BUILTIN_DTB_ALL
If this is enabled, all DTB files compiled under arch/*/boot/dts/ are
embedded into vmlinux. Only used by MIPS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 2f7ab1267d ("Kbuild: add Rust support"), Kconfig
generates include/generated/rustc_cfg, but its presence is not checked
in the top-level Makefile. It should be checked similarly to the C
header counterpart, include/generated/autoconf.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
This commit refactors the check for missing configuration files, making
it easier to add more files to the list.
The format of the error message has been slightly changed, as follows:
[Before]
ERROR: Kernel configuration is invalid.
include/generated/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
[After]
***
*** ERROR: Kernel configuration is invalid. The following files are missing:
*** - include/generated/autoconf.h
*** - include/config/auto.conf
*** Run "make oldconfig && make prepare" on kernel source to fix it.
***
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Back when we used Rust 1.60.0 (before Rust was merged in the kernel),
we added `-Wclippy::dbg_macro` to the compilation flags. This worked
great with our custom `dbg!` macro (vendored from `std`, but slightly
modified to use the kernel printing facilities).
However, in the very next version, 1.61.0, it stopped working [1] since
the lint started to use a Rust diagnostic item rather than a path to find
the `dbg!` macro [1]. This behavior remains until the current nightly
(1.83.0).
Therefore, currently, the `dbg_macro` is not doing anything, which
explains why we can invoke `dbg!` in samples/rust/rust_print.rs`, as well
as why changing the `#[allow()]`s to `#[expect()]`s in `std_vendor.rs`
doctests does not work since they are not fulfilled.
One possible workaround is using `rustc_attrs` like the standard library
does. However, this is intended to be internal, and we just started
supporting several Rust compiler versions, so it is best to avoid it.
Therefore, instead, use `disallowed_macros`. It is a stable lint and
is more flexible (in that we can provide different macros), although
its diagnostic message(s) are not as nice as the specialized one (yet),
and does not allow to set different lint levels per macro/path [2].
In turn, this requires allowing the (intentional) `dbg!` use in the
sample, as one would have expected.
Finally, in a single case, the `allow` is fixed to be an inner attribute,
since otherwise it was not being applied.
Link: https://github.com/rust-lang/rust-clippy/issues/11303 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/11307 [2]
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-13-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Some Clippy lints can be configured/tweaked. We will use these knobs to
our advantage in later commits.
This is done via a configuration file, `.clippy.toml` [1]. The file is
currently unstable. This may be a problem in the future, but we can adapt
as needed. In addition, we proposed adding Clippy to the Rust CI's RFL
job [2], so we should be able to catch issues pre-merge.
Thus introduce the file.
Link: https://doc.rust-lang.org/clippy/configuration.html [1]
Link: https://github.com/rust-lang/rust/pull/128928 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.71.0, `rustdoc` added the `unescaped_backticks` lint, which
detects what are typically typos in Markdown formatting regarding inline
code [1], e.g. from the Rust standard library:
/// ... to `deref`/`deref_mut`` must ...
/// ... use [`from_mut`]`. Specifically, ...
It does not seem to have almost any false positives, from the experience
of enabling it in the Rust standard library [2], which will be checked
starting with Rust 1.82.0. The maintainers also confirmed it is ready
to be used.
Thus enable it.
Link: https://doc.rust-lang.org/rustdoc/lints.html#unescaped_backticks [1]
Link: https://github.com/rust-lang/rust/pull/128307 [2]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.73.0, Clippy introduced the `ignored_unit_patterns` lint [1]:
> Matching with `()` explicitly instead of `_` outlines the fact that
> the pattern contains no data. Also it would detect a type change
> that `_` would ignore.
There is only a single case that requires a change:
error: matching over `()` is more explicit
--> rust/kernel/types.rs:176:45
|
176 | ScopeGuard::new_with_data((), move |_| cleanup())
| ^ help: use `()` instead of `_`: `()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ignored_unit_patterns
= note: requested on the command line with `-D clippy::ignored-unit-patterns`
Thus clean it up and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/ignored_unit_patterns [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.67.0, Clippy added the `unnecessary_safety_doc` lint [1],
which is similar to `unnecessary_safety_comment`, but for `# Safety`
sections, i.e. safety preconditions in the documentation.
This is something that should not happen with our coding guidelines in
mind. Thus enable the lint to have it machine-checked.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/unnecessary_safety_doc [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.67.0, Clippy added the `unnecessary_safety_comment` lint [1],
which is the "inverse" of `undocumented_unsafe_blocks`: it finds places
where safe code has a `// SAFETY` comment attached.
The lint currently finds 3 places where we had such mistakes, thus it
seems already quite useful.
Thus clean those and enable it.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/unnecessary_safety_comment [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Checking that we are not missing any `// SAFETY` comments in our `unsafe`
blocks is something we have wanted to do for a long time, as well as
cleaning up the remaining cases that were not documented [1].
Back when Rust for Linux started, this was something that could have
been done via a script, like Rust's `tidy`. Soon after, in Rust 1.58.0,
Clippy implemented the `undocumented_unsafe_blocks` lint [2].
Even though the lint has a few false positives, e.g. in some cases where
attributes appear between the comment and the `unsafe` block [3], there
are workarounds and the lint seems quite usable already.
Thus enable the lint now.
We still have a few cases to clean up, so just allow those for the moment
by writing a `TODO` comment -- some of those may be good candidates for
new contributors.
Link: https://github.com/Rust-for-Linux/linux/issues/351 [1]
Link: https://rust-lang.github.io/rust-clippy/master/#/undocumented_unsafe_blocks [2]
Link: https://github.com/rust-lang/rust-clippy/issues/13189 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sort the global Rust flags so that it is easier to follow along when we
have more, like this patch series does.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool
warnings), teach objtool about 'noreturn' Rust symbols and mimic
'___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be
objtool-warning-free, so enable it to run for all Rust object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on change.
- Split helpers file into several files in a folder, to avoid conflicts
in it. Eventually those files will be moved to the right places with
the new build system. In addition, remove the need to manually export
the symbols defined there, reusing existing machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc'
exists using an atomic), 'ListLinks' (the prev/next pointers for an
item in a linked list), 'List' (the linked list itself), 'Iter' (an
iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows
to remove elements), 'ListArcField' (a field exclusively owned by a
'ListArc'), as well as support for heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the upcoming
Rust Binder. This includes 'RBTree' (the red-black tree itself),
'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation
for a node), 'Iter' and 'IterMut' (immutable and mutable iterators),
'Cursor' (bidirectional cursor that allows to remove elements), as
well as an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite'
trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----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=52BN
-----END PGP SIGNATURE-----
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmby2+QVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGpQ0QALWMgox3OdceNiBT8QieqRFfwKFv
5jxtsZt+MbTdWNMEfgc4Cq2i5ZAqpYGZh32RwTiZJogBvYEIoO7M4Md9VwoEe/BC
q8VZ6FhUy7358IX/FCukfB0dYvkziRalBRDrE4iFmMMdhBvZ9nrvMxllqFCMllLj
DTrBTTiMus3qiiczr4tb5QwaIR6C+yqiEBF++ftLmWvo9dn8YNNUnI65fGjyQM/w
0wMPwsB3Y2HdnRpLUS6T18gZbjoXsAk4+WX0TpdBfTs3d7AdbzlSMtc0BslEm6Tb
JjIK6SbJCM3kNC7O0/gsUenOaSBxSbKjjg33gQxn/eNoi0nRt+qnBMMreYiTd95G
Hq86QcNfKQtWAagKRTppMkYEDqMU2RKH7BmJOsfQyeG9cGpAAu+0HsQv3f/h5QP1
MlA8o+NP5oQn6RbrhZz1Pqm24+OMxiXaBhmo8XbZ+MXzi/CBR54Eo4ip/FSHzXII
EGEAQL7t7YU7xu8qMIE6ZQMH7BJsjJNee0vrNiYZa4xHLYyHi6mJl8K6LlHQ3nEx
WOsPX9MLITtSJwcvIio/0sEnuR7pjcShGfqhbHO5tiOYznsbcSvu3+18HPGCpFRt
vYFkNIRc298k7++A+Zp2wwdD2TS+SSilrAImmJXMhf0M+Nyg2vnlfAo8t0QSkFlh
1g9dJuy+8jYRjHXP
=g4t/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
If RUST_LIB_SRC is defined in the top-level Makefile (via an environment
variable or command line), it is already exported.
The only situation where it is defined but not exported is when the
top-level Makefile is wrapped by another Makefile (e.g., GNUmakefile).
I cannot think of any other use cases.
I know some people use this tip to define custom variables. However,
even in that case, you can export it directly in the wrapper Makefile.
Example GNUmakefile:
export RUST_LIB_SRC = /path/to/your/sysroot/lib/rustlib/src/rust/library
include Makefile
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Create file module.builtin.ranges that can be used to find where
built-in modules are located by their addresses. This will be useful for
tracing tools to find what functions are for various built-in modules.
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: build cmd file with KBUILD_MODFILE
The generated data will look like:
.text 00000000-00000000 = _text
.text 0000baf0-0000cb10 amd_uncore
.text 0009bd10-0009c8e0 iosf_mbi
...
.text 00b9f080-00ba011a intel_skl_int3472_discrete
.text 00ba0120-00ba03c0 intel_skl_int3472_discrete intel_skl_int3472_tps68470
.text 00ba03c0-00ba08d6 intel_skl_int3472_tps68470
...
.data 00000000-00000000 = _sdata
.data 0000f020-0000f680 amd_uncore
For each ELF section, it lists the offset of the first symbol. This can
be used to determine the base address of the section at runtime.
Next, it lists (in strict ascending order) offset ranges in that section
that cover the symbols of one or more builtin modules. Multiple ranges
can apply to a single module, and ranges can be shared between modules.
The CONFIG_BUILTIN_MODULE_RANGES option controls whether offset range data
is generated for kernel modules that are built into the kernel image.
How it works:
1. The modules.builtin file is parsed to obtain a list of built-in
module names and their associated object names (the .ko file that
the module would be in if it were a loadable module, hereafter
referred to as <kmodfile>). This object name can be used to
identify objects in the kernel compile because any C or assembler
code that ends up into a built-in module will have the option
-DKBUILD_MODFILE=<kmodfile> present in its build command, and those
can be found in the .<obj>.cmd file in the kernel build tree.
If an object is part of multiple modules, they will all be listed
in the KBUILD_MODFILE option argument.
This allows us to conclusively determine whether an object in the
kernel build belong to any modules, and which.
2. The vmlinux.map is parsed next to determine the base address of each
top level section so that all addresses into the section can be
turned into offsets. This makes it possible to handle sections
getting loaded at different addresses at system boot.
We also determine an 'anchor' symbol at the beginning of each
section to make it possible to calculate the true base address of
a section at runtime (i.e. symbol address - symbol offset).
We collect start addresses of sections that are included in the top
level section. This is used when vmlinux is linked using vmlinux.o,
because in that case, we need to look at the vmlinux.o linker map to
know what object a symbol is found in.
And finally, we process each symbol that is listed in vmlinux.map
(or vmlinux.o.map) based on the following structure:
vmlinux linked from vmlinux.a:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
vmlinux linked from vmlinux.o:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
vmlinux.o -- need to use vmlinux.o.map
<symbol> -- ignored
...
vmlinux.o.map:
<section>
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
3. As sections, objects, and symbols are processed, offset ranges are
constructed in a straight-forward way:
- If the symbol belongs to one or more built-in modules:
- If we were working on the same module(s), extend the range
to include this object
- If we were working on another module(s), close that range,
and start the new one
- If the symbol does not belong to any built-in modules:
- If we were working on a module(s) range, close that range
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.
Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.
Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.
Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduce a Kconfig option for enabling the experimental option to
normalize integer types. This ensures that integer types of the same
size and signedness are considered compatible by the Control Flow
Integrity sanitizer.
The security impact of this flag is minimal. When Sami Tolvanen looked
into it, he found that integer normalization reduced the number of
unique type hashes in the kernel by ~1%, which is acceptable.
This option exists for compatibility with Rust, as C and Rust do not
have the same set of integer types. There are cases where C has two
different integer types of the same size and signedness, but Rust only
has one integer type of that size and signedness. When Rust calls into
C functions using such types in their signature, this results in CFI
failures. One example is 'unsigned long long' and 'unsigned long' which
are both 64-bit on LP64 targets, so on those targets this flag will give
both types the same CFI tag.
This flag changes the ABI heavily. It is not applied automatically when
CONFIG_RUST is turned on to make sure that the CONFIG_RUST option does
not change the ABI of C code. For example, some build may need to make
other changes atomically with toggling this flag. Having it be a
separate option makes it possible to first turn on normalized integer
tags, and then later turn on CONFIG_RUST.
Similarly, when turning on CONFIG_RUST in a build, you may need a few
attempts where the RUST=y commit gets reverted a few times. It is
inconvenient if reverting RUST=y also requires reverting the changes you
made to support normalized integer tags.
To avoid having this flag impact builds that don't care about this, the
next patch in this series will make CONFIG_RUST turn on this option
using `select` rather than `depends on`.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-1-c93caed3d121@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add all of the flags that are needed to support the shadow call stack
(SCS) sanitizer with Rust, and updates Kconfig to allow only
configurations that work.
The -Zfixed-x18 flag is required to use SCS on arm64, and requires rustc
version 1.80.0 or greater. This restriction is reflected in Kconfig.
When CONFIG_DYNAMIC_SCS is enabled, the build will be configured to
include unwind tables in the build artifacts. Dynamic SCS uses the
unwind tables at boot to find all places that need to be patched. The
-Cforce-unwind-tables=y flag ensures that unwind tables are available
for Rust code.
In non-dynamic mode, the -Zsanitizer=shadow-call-stack flag is what
enables the SCS sanitizer. Using this flag requires rustc version 1.82.0
or greater on the targets used by Rust in the kernel. This restriction
is reflected in Kconfig.
It is possible to avoid the requirement of rustc 1.80.0 by using
-Ctarget-feature=+reserve-x18 instead of -Zfixed-x18. However, this flag
emits a warning during the build, so this patch does not add support for
using it and instead requires 1.80.0 or greater.
The dependency is placed on `select HAVE_RUST` to avoid a situation
where enabling Rust silently turns off the sanitizer. Instead, turning
on the sanitizer results in Rust being disabled. We generally do not
want changes to CONFIG_RUST to result in any mitigations being changed
or turned off.
At the time of writing, rustc 1.82.0 only exists via the nightly release
channel. There is a chance that the -Zsanitizer=shadow-call-stack flag
will end up needing 1.83.0 instead, but I think it is small.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240829-shadow-call-stack-v7-1-2f62a4432abf@google.com
[ Fixed indentation using spaces. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was split
into new features by using an alternative approach for the code that
used what is now called the 'box_uninit_write' feature.
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers.
- Export bss symbols too.
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API.
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'.
Documentation:
- Remove unintended indentation (blockquotes) in generated output.
- Fix a couple typos.
MAINTAINERS:
- Remove Wedson as Rust maintainer.
- Update Andreas' email.
-----BEGIN PGP SIGNATURE-----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=nJge
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was
split into new features by using an alternative approach for the
code that used what is now called the 'box_uninit_write' feature
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers
- Export bss symbols too
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'
Documentation:
- Remove unintended indentation (blockquotes) in generated output
- Fix a couple typos
MAINTAINERS:
- Remove Wedson as Rust maintainer
- Update Andreas' email"
* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: update Andreas Hindborg's email address
MAINTAINERS: Remove Wedson as Rust maintainer
rust: macros: provide correct provenance when constructing THIS_MODULE
rust: allow `stable_features` lint
docs: rust: remove unintended blockquote in Quick Start
rust: alloc: eschew `Box<MaybeUninit<T>>::write`
rust: kernel: fix typos in code comments
docs: rust: remove unintended blockquote in Coding Guidelines
rust: block: fix wrong usage of lockdep API
rust: kbuild: fix export of bss symbols
Re-run Kconfig if we detect the Rust compiler has changed via the version
text, like it is done for C.
Unlike C, and unlike `RUSTC_VERSION`, the `RUSTC_VERSION_TEXT` is kept
under `depends on RUST`, since it should not be needed unless `RUST`
is enabled.
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit 5ce2176b81 ("genksyms: adjust the output format to modpost")
stopped generating *.symversions files.
Remove the left-over from the .gitignore file and the 'clean' rule.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Support for several Rust compiler versions started in commit 63b27f4a00
("rust: start supporting several compiler versions"). Since we currently
need to use a number of unstable features in the kernel, it is a matter
of time until one gets stabilized and the `stable_features` lint warns.
For instance, the `new_uninit` feature may become stable soon, which
would give us multiple warnings like the following:
warning: the feature `new_uninit` has been stable since 1.82.0-dev
and no longer requires an attribute to enable
--> rust/kernel/lib.rs:17:12
|
17 | #![feature(new_uninit)]
| ^^^^^^^^^^
|
= note: `#[warn(stable_features)]` on by default
Thus allow the `stable_features` lint to avoid such warnings. This is
the simplest approach -- we do not have that many cases (and the goal
is to stop using unstable features anyway) and cleanups can be easily
done when we decide to update the minimum version.
An alternative would be to conditionally enable them based on the
compiler version (with the upcoming `RUSTC_VERSION` or maybe with the
unstable `cfg(version(...))`, but that one apparently will not work for
the nightly case). However, doing so is more complex and may not work
well for different nightlies of the same version, unless we do not care
about older nightlies.
Another alternative is using explicit tests of the feature calling
`rustc`, but that is also more complex and slower.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240827100403.376389-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked
in upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAma/h9sACgkQGXyLc2ht
IW1pww/+OqaCo5lINZxaY9LKSX5Clm0eKESuXbeEW74Oqojhhv9daarTBgPH+0oO
yhs0UdWN2jacT31sDDSIpn2bswBPA07jY4D4J5MTmJEqEafLXLNzgFb+I9rcK/Kr
if2GoeVxyWMKvUCbZu6XQ+PRVJ078YwrSS2eaGASqecQRt+khQZ0MH1EGQD986qg
0Vtfd50p7MsVI9SyHUxazsUyV9FRvRgUUha6uPDB9dGCsP+GTYBFhJO+1s7vfb2I
quc3QaQoR5y9mjU7XtsDq5rLhgxxV1VKfODlYHlW8bh+Z33zwfFeheEgi114nfVa
DOy2jF7yj8f7WJAtDhhvUJCuJ7G1H2/B3Bx20esiV6u4WhgSZvoYwNxGgBEGw3CM
ujanA7/kuX3ZibyiBzEvhy03l1RqaBTaf307LJ1hV4GRyZTmnB8cFtrfRc2gptql
vVHAiA7krAQJoTphWbbGIUssZPVEnEVHrsb+kxZZWmSJix0gddNeZVX+XTd9YngJ
JaPDlEcdoiv7yQBjQ89b59/o21e5fphxUWCpmOv8Wy3K6ge+teDiF4g/Pgr4JPrY
AKllyUAn/LJLkVLgEMCJEWjJ8SAgKnvvJgxO3XodwgRkFzoroiZtX1UtC4iP3v9I
/sFhPNP1Ya/AXtU8P6uBwleViVG5Ste2PROgPnjINjik2Acv9EA=
=2uNw
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
When calling the `rust_is_available.sh` script, we need to make the
jobserver available to it, as commit ecab4115c4 ("kbuild: mark `rustc`
(and others) invocations as recursive") explains and did for the others.
Otherwise, we get a warning from `rustc` when calling `make rust-analyzer`
with parallel jobs, e.g. `-j8`. Using several jobs for that target does
not really matter, but developers may call `make` with jobs enabled in
all cases.
Thus fix it.
Fixes: 6dc9d9ca9a ("kbuild: rust-analyzer: better error handling")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240806233559.246705-1-ojeda@kernel.org
[ Reworded to add a couple more details mentioned in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
