My current email address will stop working soon. Use
linux.dev email instead.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/655555/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
I will no longer regularly work on this platform. Hence will
step down from maintainer duties.
Also, add Jessica as a reviewer to the MSM DRM subsystem to help
out with the reviews.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/655558/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
perf report/top/annotate TUI:
- Accept the left arrow key as a Zoom out if done on the first column.
- Show if source code toggle status in title, to help spotting bugs with
the various disassemblers (capstone, llvm, objdump).
- Provide feedback on unhandled hotkeys.
Build:
- Better inform when certain features are not available with warnings in the
build process and in 'perf version --build-options' or 'perf -vv'.
perf record:
- Improve the --off-cpu code by synthesizing events for switch-out -> switch-in
intervals using a BPF program. This can be fine tuned using a --off-cpu-thresh
knob.
perf report:
- Add 'tgid' sort key.
perf mem/c2c:
- Add 'op', 'cache', 'snoop', 'dtlb' output fields.
- Add support for 'ldlat' on AMD IBS (Instruction Based Sampling).
perf ftrace:
- Use process/session specific trace settings instead of messing with
the global ftrace knobs.
perf trace:
- Implement syscall summary in BPF.
- Support --summary-mode=cgroup.
- Always print return value for syscalls returning a pid.
- The rseq and set_robust_list don't return a pid, just -errno.
perf lock contention:
- Symbolize zone->lock using BTF.
- Add -J/--inject-delay option to estimate impact on application performance by
optimization of kernel locking behavior.
perf stat:
- Improve hybrid support for the NMI watchdog warning.
Symbol resolution:
- Handle 'u' and 'l' symbols in /proc/kallsyms, resolving some Rust symbols.
- Improve Rust demangler.
Hardware tracing:
Intel PT:
- Fix PEBS-via-PT data_src.
- Do not default to recording all switch events.
- Fix pattern matching with python3 on the SQL viewer script.
arm64:
- Fixups for the hip08 hha PMU.
Vendor events:
- Update Intel events/metrics files for alderlake, alderlaken, arrowlake,
bonnell, broadwell, broadwellde, broadwellx, cascadelakex, clearwaterforest,
elkhartlake, emeraldrapids, grandridge, graniterapids, haswell, haswellx,
icelake, icelakex, ivybridge, ivytown, jaketown, lunarlake, meteorlake,
nehalemep, nehalemex, rocketlake, sandybridge, sapphirerapids, sierraforest,
skylake, skylakex, snowridgex, tigerlake, westmereep-dp, westmereep-sp,
westmereep-sx.
python support:
- Add support for event counts in the python binding, add a counting.py example.
perf list:
- Display the PMU name associated with a perf metric in JSON.
perf test:
- Hybrid improvements for metric value validation test.
- Fix LBR test by ignoring idle task.
- Add AMD IBS sw filter ana d'ldlat' tests.
- Add 'perf trace --summary-mode=cgroup' test.
- Add tests for the various language symbol demanglers.
Miscellaneous.
- Allow specifying the cpu an event will be tied using '-e event/cpu=N/'.
- Sync various headers with the kernel sources.
- Add annotations to use clang's -Wthread-safety and fix some problems
it detected.
- Make dump_stack() use perf's symbol resolution to provide better backtraces.
- Intel TPEBS support cleanups and fixes. TPEBS stands for Timed PEBS
(Precision Event-Based Sampling), that adds timing info, the retirement
latency of instructions.
- Various memory allocation (some detected by ASAN) and reference counting
fixes.
- Add a 8-byte aligned PERF_RECORD_COMPRESSED2 to replace PERF_RECORD_COMPRESSED.
- Skip unsupported event types in perf.data files, don't stop when finding one.
- Improve lookups using hashmaps and binary searches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaD9ViwAKCRCyPKLppCJ+
JzOfAQDXlukhPQyuJ4j1ie0x1QO4jalloMbG1Bkp3hn6yjxafAD9Ha5wr+dwnAj4
FfxOVqua29r8Htn4aGahXZ0nnlVp9Ac=
=bwgD
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.16-1-2025-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf report/top/annotate TUI:
- Accept the left arrow key as a Zoom out if done on the first column
- Show if source code toggle status in title, to help spotting bugs
with the various disassemblers (capstone, llvm, objdump)
- Provide feedback on unhandled hotkeys
Build:
- Better inform when certain features are not available with warnings
in the build process and in 'perf version --build-options' or 'perf -vv'
perf record:
- Improve the --off-cpu code by synthesizing events for switch-out ->
switch-in intervals using a BPF program. This can be fine tuned
using a --off-cpu-thresh knob
perf report:
- Add 'tgid' sort key
perf mem/c2c:
- Add 'op', 'cache', 'snoop', 'dtlb' output fields
- Add support for 'ldlat' on AMD IBS (Instruction Based Sampling)
perf ftrace:
- Use process/session specific trace settings instead of messing with
the global ftrace knobs
perf trace:
- Implement syscall summary in BPF
- Support --summary-mode=cgroup
- Always print return value for syscalls returning a pid
- The rseq and set_robust_list don't return a pid, just -errno
perf lock contention:
- Symbolize zone->lock using BTF
- Add -J/--inject-delay option to estimate impact on application
performance by optimization of kernel locking behavior
perf stat:
- Improve hybrid support for the NMI watchdog warning
Symbol resolution:
- Handle 'u' and 'l' symbols in /proc/kallsyms, resolving some Rust
symbols
- Improve Rust demangler
Hardware tracing:
Intel PT:
- Fix PEBS-via-PT data_src
- Do not default to recording all switch events
- Fix pattern matching with python3 on the SQL viewer script
arm64:
- Fixups for the hip08 hha PMU
Vendor events:
- Update Intel events/metrics files for alderlake, alderlaken,
arrowlake, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, clearwaterforest, elkhartlake, emeraldrapids,
grandridge, graniterapids, haswell, haswellx, icelake, icelakex,
ivybridge, ivytown, jaketown, lunarlake, meteorlake, nehalemep,
nehalemex, rocketlake, sandybridge, sapphirerapids, sierraforest,
skylake, skylakex, snowridgex, tigerlake, westmereep-dp,
westmereep-sp, westmereep-sx
python support:
- Add support for event counts in the python binding, add a
counting.py example
perf list:
- Display the PMU name associated with a perf metric in JSON
perf test:
- Hybrid improvements for metric value validation test
- Fix LBR test by ignoring idle task
- Add AMD IBS sw filter ana d'ldlat' tests
- Add 'perf trace --summary-mode=cgroup' test
- Add tests for the various language symbol demanglers
Miscellaneous:
- Allow specifying the cpu an event will be tied using '-e
event/cpu=N/'
- Sync various headers with the kernel sources
- Add annotations to use clang's -Wthread-safety and fix some
problems it detected
- Make dump_stack() use perf's symbol resolution to provide better
backtraces
- Intel TPEBS support cleanups and fixes. TPEBS stands for Timed PEBS
(Precision Event-Based Sampling), that adds timing info, the
retirement latency of instructions
- Various memory allocation (some detected by ASAN) and reference
counting fixes
- Add a 8-byte aligned PERF_RECORD_COMPRESSED2 to replace
PERF_RECORD_COMPRESSED
- Skip unsupported event types in perf.data files, don't stop when
finding one
- Improve lookups using hashmaps and binary searches"
* tag 'perf-tools-for-v6.16-1-2025-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (206 commits)
perf callchain: Always populate the addr_location map when adding IP
perf lock contention: Reject more than 10ms delays for safety
perf trace: Set errpid to false for rseq and set_robust_list
perf symbol: Move demangling code out of symbol-elf.c
perf trace: Always print return value for syscalls returning a pid
perf script: Print PERF_AUX_FLAG_COLLISION flag
perf mem: Show absolute percent in mem_stat output
perf mem: Display sort order only if it's available
perf mem: Describe overhead calculation in brief
perf record: Fix incorrect --user-regs comments
Revert "perf thread: Ensure comm_lock held for comm_list"
perf test trace_summary: Skip --bpf-summary tests if no libbpf
perf test intel-pt: Skip jitdump test if no libelf
perf intel-tpebs: Avoid race when evlist is being deleted
perf test demangle-java: Don't segv if demangling fails
perf symbol: Fix use-after-free in filename__read_build_id
perf pmu: Avoid segv for missing name/alias_name in wildcarding
perf machine: Factor creating a "live" machine out of dwarf-unwind
perf test: Add AMD IBS sw filter test
perf mem: Count L2 HITM for c2c statistic
...
* LED Triggers:
* Allow writing "default" to the sysfs 'trigger' attribute to set an LED to its default trigger
* If the default trigger is "none", writing "default" will remove the current trigger
* Updated sysfs ABI documentation for the new "default" trigger functionality
* LED KUnit Testing:
* Provide a skeleton KUnit test suite for the LEDs framework
* Expand the LED class device registration KUnit test to cover more scenarios, including
`brightness_get` behavior
* Add KUnit tests for the LED lookup and get API (`led_add_lookup`, `devm_led_get`)
* LED Flash Class:
* Add support for setting flash/strobe duration through a new `duration_set` op and
`led_set_flash_duration()` function, aligning with `V4L2_CID_FLASH_DURATION`
* Texas Instruments TPS6131x:
* Add a new driver for the TPS61310/TPS61311 flash LED controllers
* The driver supports the device's three constant-current sinks for flash and torch modes
* LED Core:
* Prevent potential `snprintf()` truncations in LED names by checking for buffer overflows
* ChromeOS EC LEDs:
* Avoid a -Wflex-array-member-not-at-end GCC warning by replacing an on-stack flexible structure
definition with a utility function call
* Multicolor LEDs:
* Fix issue where setting multi_intensity while software blinking is active could stop blinking
* PCA955x LEDs:
* Avoid potential buffer overflow when creating default labels by changing a field's type to
`u8` and updating format specifiers
* PCA995x LEDs:
* Fix a typo (stray space) in an `of_device_id` entry in the `pca995x_of_match` table
* Kconfig:
* Prevent LED drivers from being enabled by default when `COMPILE_TEST` is set
* Device Property API:
* Split `device_get_child_node_count()` into a new helper `fwnode_get_child_node_count()` that
doesn't require a device struct, making the API more symmetrical
* Driver Modernization (using `fwnode_get_child_node_count()`):
* Update `leds-pwm-multicolor`, `leds-ncp5623` and `leds-ncp5623` to use the new
`fwnode_get_child_node_count()` helper, removing their custom implementation
* As above in the USB Type-C TCPM driver
* Driver Modernization (using new GPIO setter callbacks):
* Convert `leds-lgm-sso` to use new GPIO line value setter callbacks which return an integer
for error handling
* Convert `leds-pca955x`, `leds-pca9532` and `leds-tca6507` to use new GPIO setter callbacks
* Documentation:
* Remove the `.rst` extension for `leds-st1202` in the documentation index for consistency
* LP8860 LEDs:
* Use `regmap_multi_reg_write()` for EEPROM writes instead of manual looping
* Use scoped mutex guards and `devm_mutex_init()` to simplify function exits and ensure
automatic cleanup
* Remove default register definitions that are unused when regmap caching is not active
* Use `devm_regulator_get_enable_optional()` to handle the optional regulator, simplifying
enabling and removing manual disabling
* Refactor `lp8860_unlock_eeprom()` to only perform the unlock operation, removing the lock
part and an unnecessary parameter
* Use a `devm` action to disable the enable-GPIO, simplifying cleanup and error paths, and
remove the now-empty `.remove()` function
* Turris Omnia LEDs:
* Drop unnecessary commas in terminator entries of `struct attribute` and
`struct of_device_id` arrays
* MT6370 RGB LEDs:
* Use the `LINEAR_RANGE()` for defining `struct linear_range` entries to improve robustness
* Texas Instruments TPS6131x:
* Add new devicetree bindings for the TI TPS61310/TPS61311 flash LED driver
-----BEGIN PGP SIGNATURE-----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=iVDb
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"LED Triggers:
- Allow writing "default" to the sysfs 'trigger' attribute to set an
LED to its default trigger
- If the default trigger is "none", writing "default" will remove the
current trigger
- Updated sysfs ABI documentation for the new "default" trigger
functionality
LED KUnit Testing:
- Provide a skeleton KUnit test suite for the LEDs framework
- Expand the LED class device registration KUnit test to cover more
scenarios, including 'brightness_get' behavior
- Add KUnit tests for the LED lookup and get API ('led_add_lookup',
'devm_led_get')
LED Flash Class:
- Add support for setting flash/strobe duration through a new
'duration_set' op and 'led_set_flash_duration()' function, aligning
with 'V4L2_CID_FLASH_DURATION'
Texas Instruments TPS6131x:
- Add a new driver for the TPS61310/TPS61311 flash LED controllers
- The driver supports the device's three constant-current sinks for
flash and torch modes
LED Core:
- Prevent potential 'snprintf()' truncations in LED names by checking
for buffer overflows
ChromeOS EC LEDs:
- Avoid a -Wflex-array-member-not-at-end GCC warning by replacing an
on-stack flexible structure definition with a utility function call
Multicolor LEDs:
- Fix issue where setting multi_intensity while software blinking is
active could stop blinking
PCA955x LEDs:
- Avoid potential buffer overflow when creating default labels by
changing a field's type to 'u8' and updating format specifiers
PCA995x LEDs:
- Fix a typo (stray space) in an 'of_device_id' entry in the
'pca995x_of_match' table
Kconfig:
- Prevent LED drivers from being enabled by default when
'COMPILE_TEST' is set
Device Property API:
- Split 'device_get_child_node_count()' into a new helper
'fwnode_get_child_node_count()' that doesn't require a device
struct, making the API more symmetrical
Driver Modernization (using 'fwnode_get_child_node_count()'):
- Update 'leds-pwm-multicolor', 'leds-ncp5623' and 'leds-ncp5623' to
use the new 'fwnode_get_child_node_count()' helper, removing their
custom implementation
- As above in the USB Type-C TCPM driver
Driver Modernization (using new GPIO setter callbacks):
- Convert 'leds-lgm-sso' to use new GPIO line value setter callbacks
which return an integer for error handling
- Convert 'leds-pca955x', 'leds-pca9532' and 'leds-tca6507' to use
new GPIO setter callbacks
Documentation:
- Remove the '.rst' extension for 'leds-st1202' in the documentation
index for consistency
LP8860 LEDs:
- Use 'regmap_multi_reg_write()' for EEPROM writes instead of manual
looping
- Use scoped mutex guards and 'devm_mutex_init()' to simplify
function exits and ensure automatic cleanup
- Remove default register definitions that are unused when regmap
caching is not active
- Use 'devm_regulator_get_enable_optional()' to handle the optional
regulator, simplifying enabling and removing manual disabling
- Refactor 'lp8860_unlock_eeprom()' to only perform the unlock
operation, removing the lock part and an unnecessary parameter
- Use a 'devm' action to disable the enable-GPIO, simplifying cleanup
and error paths, and remove the now-empty '.remove()' function
Turris Omnia LEDs:
- Drop unnecessary commas in terminator entries of 'struct attribute'
and 'struct of_device_id' arrays
MT6370 RGB LEDs:
- Use the 'LINEAR_RANGE()' for defining 'struct linear_range' entries
to improve robustness
Texas Instruments TPS6131x:
- Add new devicetree bindings for the TI TPS61310/TPS61311 flash LED
driver"
* tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (31 commits)
leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver
dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driver
leds: flash: Add support for flash/strobe duration
leds: rgb: leds-mt6370-rgb: Improve definition of some struct linear_range
leds: led-test: Provide tests for the lookup and get infrastructure
leds: led-test: Fill out the registration test to cover more test cases
leds: led-test: Remove standard error checking after KUNIT_ASSERT_*()
leds: pca995x: Fix typo in pca995x_of_match's of_device_id entry
leds: Provide skeleton KUnit testing for the LEDs framework
leds: tca6507: Use new GPIO line value setter callbacks
leds: pca9532: Use new GPIO line value setter callbacks
leds: pca955x: Use new GPIO line value setter callbacks
leds: lgm-sso: Use new GPIO line value setter callbacks
leds: Do not enable by default during compile testing
leds: turris-omnia: Drop commas in the terminator entries
leds: lp8860: Disable GPIO with devm action
leds: lp8860: Only unlock in lp8860_unlock_eeprom()
leds: lp8860: Enable regulator using enable_optional helper
leds: lp8860: Remove default regs when not caching
leds: lp8860: Use new mutex guards to cleanup function exits
...
* Samsung Exynos ACPM:
* Populate child platform devices from device tree data
* Introduce a new API, `devm_acpm_get_by_node()`, for child devices to get the ACPM handle
* ROHM PMICs:
* Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver
* Add support for controlling the BD96802 using the BD96801 regulator driver
* Add support to the BD96805, which is almost identical to the BD96801
* Add support to the BD96806, which is similar to the BD96802
* Maxim MAX77759:
* Add a core driver for the MAX77759 companion PMIC
* Add a GPIO driver for the expander functions on the MAX77759
* Add an NVMEM driver to expose the non-volatile memory on the MAX77759
* STMicroelectronics STM32MP25:
* Add support for the STM32MP25 SoC to the stm32-lptimer
* Add support for the STM32MP25 to the clocksource driver, handling new register access requirements
* Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs
* Broadcom BCM590xx:
* Add support for the BCM59054 PMU
* Parse the PMU ID and revision to support behavioral differences between chip revisions
* Add regulator support for the BCM59054
* Samsung S2MPG10:
* Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C
* Exynos ACPM:
* Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption
* Allow PMIC access during late system shutdown by switching to `udelay()` instead of a sleeping function
* Fix an issue where reading command results longer than 8 bytes would fail
* Silence non-error `-EPROBE_DEFER` messages during boot to clean up logs
* Exynos LPASS:
* Fix an error handling path by switching to `devm_regmap_init_mmio()` to prevent resource leaks
* Fix a bug where `exynos_lpass_disable()` was called twice in the remove function
* Fix another resource leak in the probe's error path by using `devm_add_action_or_reset()`
* Samsung SEC:
* Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings
* Fix the core driver to correctly handle errors from `sec_irq_init()` instead of ignoring them
* STMPE-SPI:
* Correct an undeclared identifier in the `MODULE_DEVICE_TABLE` macro
* MAINTAINERS:
* Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference
* Maxim Drivers:
* Correct the spelling of "Electronics" in Samsung copyright headers across multiple files
* General:
* Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705,
max8925, rt5033, and sprd-sc27xx drivers
* Samsung SEC Drivers:
* Split the driver into a transport-agnostic core (`sec-core`) and transport-specific (`sec-i2c`,
`sec-acpm`) modules to support non-I2C devices
* Merge the `sec-core` and `sec-irq` modules to reduce memory consumption
* Move internal APIs to a private header to clean up the public API
* Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper
macros like `dev_err_probe()`, `MFD_CELL`, and `REGMAP_IRQ_REG`
* Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity
* Rework platform data and regmap instantiation to use OF match data instead of a large switch statement
* ROHM BD96801/2:
* Prepare the driver for new models by separating chip-specific data into its own structure
* Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification
* Broadcom BCM590xx:
* Refactor the regulator driver to store descriptions in a table to ease support for new chips
* Rename BCM59056-specific data to prepare for the addition of other regulators
* Use `dev_err_probe()` for cleaner error handling
* Exynos ACPM:
* Correct kerneldoc warnings and use the conventional 'np' argument name
* General MFD:
* Convert `aat2870` and `tps65010` to use the per-client debugfs directory provided by the I2C core
* Convert `sm501`, `tps65010` and `ucb1x00` to use the new GPIO line value setter callbacks
* Constify `regmap_irq_chip` and other structures in `88pm886` to move data to read-only sections
* BCM590xx:
* Drop the unused "id" member from the `bcm590xx` struct in preparation for a replacement
* Samsung SEC Core:
* Remove forward declarations for functions that no longer exist
* SM501:
* Remove the unused `sm501_find_clock()` function
* New Compatibles:
* Google: Add a PMIC child node to the `google,gs101-acpm-ipc` binding
* ROHM: Add new bindings for `rohm,bd96802-regulator` and `rohm,bd96802-pmic`, and add compatibles
for BD96805 and BD96806
* Maxim: Add new bindings for `maxim,max77759-gpio`, `maxim,max77759-nvmem`, and the top-level
`maxim,max77759`
* STM: Add `stm32mp25` compatible to the `stm32-lptimer` binding
* Broadcom: Add `bcm59054` compatible
* Atmel/Microchip: Add `microchip,sama7d65-gpbr` and `microchip,sama7d65-secumod` compatibles
* Samsung: Add `s2mpg10` compatible to the `samsung,s2mps11` MFD binding
* MediaTek: Add compatibles for `mt6893` (scpsys), `mt7988-topmisc`, and `mt8365-infracfg-nao`
* Qualcomm: Add `qcom,apq8064-mmss-sfpb` and `qcom,apq8064-sps-sic` syscon compatibles
* Refactoring & Cleanup:
* Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts
* Convert the Microchip AT91 secumod binding to YAML
* Drop unrelated consumer nodes from binding examples to reduce bloat
* Correct indentation and style in various DTS examples
-----BEGIN PGP SIGNATURE-----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=hiAm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
- New drivers
* Driver for KEBA fan controller
* Driver for KEBA battery monitoring controller
* Driver for MAX77705
- Support added to existing drivers
* asus-ec-sensors: Support or MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula
* ina238: Support for SQ52206
* pmbus/lt3074: Support for lt3074
* pmbus/max34440: Support for ADPM12160
* pmbus/mpq8785: Support for MPM82504 and for MPM3695 family
* dell-smm: Add the Dell OptiPlex 7050 to the DMI whitelist
* k10temp: Support for Zen5 Ryzen Desktop
- Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=vmBd
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- KEBA fan controller
- KEBA battery monitoring controller
- MAX77705
Support added to existing drivers:
- MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors)
- SQ52206 support (ina238)
- lt3074 support (pmbus/lt3074)
- ADPM12160 support (pmbus/max34440)
- MPM82504 and for MPM3695 family support (pmbus/mpq8785)
- Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm)
- Zen5 Ryzen Desktop support (k10temp)
Various other minor fixes and improvements"
* tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature.
hwmon: (isl28022) Fix current reading calculation
hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data
hwmon: Add KEBA fan controller support
hwmon: pmbus: mpq8785: Add support for MPM3695 family
hwmon: pmbus: mpq8785: Add support for MPM82504
hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration
hwmon: pmbus: mpq8785: Prepare driver for multiple device support
dt-bindings: hwmon: Add bindings for mpq8785 driver
hwmon: (ina238) Modify the calculation formula to adapt to different chips
hwmon: (ina238) Add support for SQ52206
dt-bindings: Add SQ52206 to ina2xx devicetree bindings
hwmon: (ina238) Add ina238_config to save configurations for different chips
hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO.
hwmon: (isl28022, nct7363) Convert to use maple tree register cache
hwmon: (asus-ec-sensors) check sensor index in read_string()
hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula.
dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support
hwmon: (max77705) Add initial support
hwmon: (tmp102) add vcc regulator support
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCaD2Y1wAKCRDh3BK/laaZ
PFSHAP4q1+mOlQfZJPH/PFDwa+F0QW/uc3szXatS0888nxui/gEAsIeyyJlf+Mr8
/1JPXxCqcapRFw9xsS0zioiK54Elfww=
=2KxA
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Remove tmp page copying in writeback path (Joanne).
This removes ~300 lines and with that a lot of complexity related to
avoiding reclaim related deadlock. The old mechanism is replaced with
a mapping flag that tells the MM not to block reclaim waiting for
writeback to complete. The MM parts have been reviewed/acked by
respective maintainers.
- Convert more code to handle large folios (Joanne). This still just
adds the code to deal with large folios and does not enable them yet.
- Allow invalidating all cached lookups atomically (Luis Henriques).
This feature is useful for CernVMFS, which currently does this
iteratively.
- Align write prefaulting in fuse with generic one (Dave Hansen)
- Fix race causing invalid data to be cached when setting attributes on
different nodes of a distributed fs (Guang Yuan Wu)
- Update documentation for passthrough (Chen Linxuan)
- Add fdinfo about the device number associated with an opened
/dev/fuse instance (Chen Linxuan)
- Increase readdir buffer size (Miklos). This depends on a patch to VFS
readdir code that was already merged through Christians tree.
- Optimize io-uring request expiration (Joanne)
- Misc cleanups
* tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: increase readdir buffer size
readdir: supply dir_context.count as readdir buffer size hint
fuse: don't allow signals to interrupt getdents copying
fuse: support large folios for writeback
fuse: support large folios for readahead
fuse: support large folios for queued writes
fuse: support large folios for stores
fuse: support large folios for symlinks
fuse: support large folios for folio reads
fuse: support large folios for writethrough writes
fuse: refactor fuse_fill_write_pages()
fuse: support large folios for retrieves
fuse: support copying large folios
fs: fuse: add dev id to /dev/fuse fdinfo
docs: filesystems: add fuse-passthrough.rst
MAINTAINERS: update filter of FUSE documentation
fuse: fix race between concurrent setattrs from multiple nodes
fuse: remove tmp folio for writebacks and internal rb tree
mm: skip folio reclaim in legacy memcg contexts for deadlockable mappings
fuse: optimize over-io-uring request expiration check
...
Update my e-mail address and add relevant entries to the .mailmap file.
[bhelgaas: drop maintainer status change]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250418045251.7434-1-kwilczynski@kernel.org
* Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/.
kernel/ patches acked by Peter Zijlstra.
* Add MGLRU support to the access tracking perf test.
ARM fixes:
* Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change.
* Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o private
IRQs allocated.
* Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum.
* Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping.
* Avoid dereferencing a NULL pointer in the VGIC debug code, which can
happen if the device doesn't have any mapping yet.
s390:
* Fix interaction between some filesystems and Secure Execution
* Some cleanups and refactorings, preparing for an upcoming big series
x86:
* Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
* Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
* Refine and harden handling of spurious faults.
* Add support for ALLOWED_SEV_FEATURES.
* Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
* Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
* Don't account temporary allocations in sev_send_update_data().
* Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
* Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
* Advertise support to userspace for WRMSRNS and PREFETCHI.
* Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
* Add a module param to control and enumerate support for device posted
interrupts.
* Fix a potential overflow with nested virt on Intel systems running 32-bit kernels.
* Flush shadow VMCSes on emergency reboot.
* Add support for SNP to the various SEV selftests.
* Add a selftest to verify fastops instructions via forced emulation.
* Refine and optimize KVM's software processing of the posted interrupt bitmap, and share
the harvesting code between KVM and the kernel's Posted MSI handler
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg9TjwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOUxQf7B7nnWqIKd7jSkGzSD6YsSX9TXktr
2tJIOfWM3zNYg5GRCidg+m4Y5+DqQWd3Hi5hH2P9wUw7RNuOjOFsDe+y0VBr8ysE
ve39t/yp+mYalNmHVFl8s3dBDgrIeGKiz+Wgw3zCQIBZ18rJE1dREhv37RlYZ3a2
wSvuObe8sVpCTyKIowDs1xUi7qJUBoopMSuqfleSHawRrcgCpV99U8/KNFF5plLH
7fXOBAHHniVCVc+mqQN2wxtVJDhST+U3TaU4GwlKy9Yevr+iibdOXffveeIgNEU4
D6q1F2zKp6UdV3+p8hxyaTTbiCVDqsp9WOgY/0I/f+CddYn0WVZgOlR+ow==
=mYFL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
- support for game controllers requiring delayed initialization
packets, such as ByoWave Proteus, in xpad driver
- a change to atkbd driver to not reset the keyboard on Loongson devices
- tweaks to gpio-keys and matrix_keypad drivers
- fixes to documentation for Amiga joysticks
- a fix to ims-pcu driver to better handle malformed firmware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaD0unwAKCRBAj56VGEWX
nOfoAQCX4WWJumaFu9wAix2cdu+zfNNmqvtOZu0rWrs0ah8NzgD/VGLoemFf3gg3
SjetSN3yHI5XUicvs2Jcydts7n3GMgI=
=32Le
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for game controllers requiring delayed initialization
packets, such as ByoWave Proteus, in xpad driver
- a change to atkbd driver to not reset the keyboard on Loongson
devices
- tweaks to gpio-keys and matrix_keypad drivers
- fixes to documentation for Amiga joysticks
- a fix to ims-pcu driver to better handle malformed firmware
* tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - check record size in ims_pcu_flash_firmware()
Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer()
Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT
Input: amijoy - make headings compliant w/ guidelines in documentation
Input: amijoy - fix grammar in documentation
Input: amijoy - fix Amiga 4-joystick adapter pinout in documentation
Input: amijoy - fix broken table formatting in documentation
Input: atkbd - do not reset keyboard by default on Loongson
Input: xpad - send LED and auth done packets to all Xbox One controllers
Input: xpad - add the ByoWave Proteus controller
Input: xpad - allow delaying init packets
MAINTAINERS: update dlg,da72??.txt to yaml
dt-bindings: input: convert dlg,da7280.txt to dt-schema
dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties
Input: snvs_pwrkey - support power-off-time-sec
dt-bindings: crypto: fsl,sec-v4.0-mon: Add "power-off-time-sec"
Input: matrix_keypad - detect change during scan
Input: matrix_keypad - add function for reading row state
register a master device. This is a problem that has been there forever:
the "master" device was not always present depending on a number of
heuristics such as the presence of fixed partitions and the absence of a
Kconfig symbol to force its presence. This was a problem for runtime PM
operations which might not have the "master" device available in all
situation.
The SPI NAND subsystem has seen the introduction of DTR operations (the
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmg91NEACgkQJWrqGEe9
VoR8egf+JPTtykQ+Bip9bHStgfpxi0+OKL81PUuPBsbs5C546u5t6ZRhoPsU+KqL
ZTyUk3ys7HcSwZCuiS9V6ea6TNV1FvAVZm+ONpkuPnU60++z8YfVr8ZvtgT0IUXx
COi+5ksdsTFZMyRG+VybRKnYNrTYB7j7CqVL8ifxq1XYWnYdhjy5PH4DgAKnBhGL
523kN2eR85AhvJ4aulsKbcqQQYKvJIQbhjAKklA3yQVarDmoOdiSmndoZlRy+MDu
B9DaRMvRRa/g1nI0stvR9K7FtdSrMYTg4kowR9jPRx0zEZXFFsZbASgcC+3G7HdK
7rLFWrN+G6fitcEjeAnfyV+sKF48LA==
=tW1t
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"A big core MTD change is the introduction of a new class to always
register a master device. This is a problem that has been there
forever: the "master" device was not always present depending on a
number of heuristics such as the presence of fixed partitions and the
absence of a Kconfig symbol to force its presence. This was a problem
for runtime PM operations which might not have the "master" device
available in all situation.
The SPI NAND subsystem has seen the introduction of DTR operations
(the equivalent of DDR transfers), which involved quite a few
preparation patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for
old legacy SoCs with an update of the ->exec_op() hook, there has been
the introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion"
* tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (42 commits)
mtd: rawnand: brcmnand: legacy exec_op implementation
mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk
mtd: nand: brcmnand: fix NAND timeout when accessing eMMC
mtd: nand: sunxi: Add randomizer configuration before randomizer enable
mtd: spinand: esmt: fix id code for F50D1G41LB
mtd: rawnand: brcmnand: remove unused parameters
mtd: core: always create master device
mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()
mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()
mtd: rawnand: qcom: Fix read len for onfi param page
mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base
dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller
mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd()
mtd: rawnand: Use non-hybrid PCI devres API
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips
mtd: spinand: winbond: Add octal support
mtd: spinand: winbond: Add support for W35N01JW in single mode
mtd: spinand: winbond: Rename DTR variants
...
Commit 65eaac591b ("um: Remove obsolete legacy network transports")
removes the directory arch/um/os-Linux/drivers/, but misses to remove the
file entry in TUN/TAP DRIVER referring to that directory.
Remove this obsolete file entry. While at it, put the section name in
capital letters.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250507071004.35120-1-lukas.bulwahn@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
semaphore" from Lance Yang enhances the hung task detector. The
detector presently dumps the blocking tasks's stack when it is blocked
on a mutex. Lance's series extends this to semaphores.
- The 2 patch series "nilfs2: improve sanity checks in dirty state
propagation" from Wentao Liang addresses a couple of minor flaws in
nilfs2.
- The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
- The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
volume keys" from Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in the
series [0/N] cover letter.
- The 2 patch series "sysfs: add counters for lockups and stalls" from
Max Kellermann adds /sys/kernel/hardlockup_count and
/sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
- The 3 patch series "fork: Page operation cleanups in the fork code"
from Pasha Tatashin implements a number of code cleanups in fork.c.
- The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
the gdb scripts.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
=g45L
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
simplifies the act of creating a pte which addresses the first page in a
folio and reduces the amount of plumbing which architecture must
implement to provide this.
- The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox
is a shower of largely unrelated folio infrastructure changes which
clean things up and better prepare us for future work.
- The 3 patch series "memory,x86,acpi: hotplug memory alignment
advisement" from Gregory Price adds early-init code to prevent x86 from
leaving physical memory unused when physical address regions are not
aligned to memory block size.
- The 2 patch series "mm/compaction: allow more aggressive proactive
compaction" from Michal Clapinski provides some tuning of the (sadly,
hard-coded (more sadly, not auto-tuned)) thresholds for our invokation
of proactive compaction. In a simple test case, the reduction of a guest
VM's memory consumption was dramatic.
- The 8 patch series "Minor cleanups and improvements to swap freeing
code" from Kemeng Shi provides some code cleaups and a small efficiency
improvement to this part of our swap handling code.
- The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API"
from Dmitry Levin adds the ability for a ptracer to modify syscalls
arguments. At this time we can alter only "system call information that
are used by strace system call tampering, namely, syscall number,
syscall arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report
guard regions" from Andrei Vagin extends the info returned by the
PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more
efficiently get at the info about guard regions.
- The 2 patch series "Fix parameter passed to page_mapcount_is_type()"
from Gavin Shan implements that fix. No runtime effect is expected
because validate_page_before_insert() happens to fix up this error.
- The 3 patch series "kernel/events/uprobes: uprobe_write_opcode()
rewrite" from David Hildenbrand basically brings uprobe text poking into
the current decade. Remove a bunch of hand-rolled implementation in
favor of using more current facilities.
- The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64"
from Anshuman Khandual provides enhancements and generalizations to the
pte dumping code. This might be needed when 128-bit Page Table
Descriptors are enabled for ARM.
- The 12 patch series "Always call constructor for kernel page tables"
from Kevin Brodsky "ensures that the ctor/dtor is always called for
kernel pgtables, as it already is for user pgtables". This permits the
addition of more functionality such as "insert hooks to protect page
tables". This change does result in various architectures performing
unnecesary work, but this is fixed up where it is anticipated to occur.
- The 9 patch series "Rust support for mm_struct, vm_area_struct, and
mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM
structures.
- The 3 patch series "fix incorrectly disallowed anonymous VMA merges"
from Lorenzo Stoakes takes advantage of some VMA merging opportunities
which we've been missing for 15 years.
- The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED
and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB
flushing. Instead of flushing each address range in the provided iovec,
we batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- The 6 patch series "Track node vacancy to reduce worst case allocation
counts" from Sidhartha Kumar makes the maple tree smarter about its node
preallocation. stress-ng mmap performance increased by single-digit
percentages and the amount of unnecessarily preallocated memory was
dramaticelly reduced.
- The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from
Baoquan He removes a few unnecessary things which Baoquan noted when
reading the code.
- The 3 patch series ""Enhance sysfs handling for memory hotplug in
weighted interleave" from Rakie Kim "enhances the weighted interleave
policy in the memory management subsystem by improving sysfs handling,
fixing memory leaks, and introducing dynamic sysfs updates for memory
hotplug support". Fixes things on error paths which we are unlikely to
hit.
- The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups
including tiered memory" from SeongJae Park introduces new DAMOS quota
goal metrics which eliminate the manual tuning which is required when
utilizing DAMON for memory tiering.
- The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from
Baoquan He provides cleanups and small efficiency improvements which
Baoquan found via code inspection.
- The 2 patch series "vmscan: enforce mems_effective during demotion"
from Gregory Price "changes reclaim to respect cpuset.mems_effective
during demotion when possible". because "presently, reclaim explicitly
ignores cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated." "This is useful for isolating workloads on a
multi-tenant system from certain classes of memory more consistently."
- The 2 patch series ""Clean up split_huge_pmd_locked() and remove
unnecessary folio pointers" from Gavin Guo provides minor cleanups and
efficiency gains in in the huge page splitting and migrating code.
- The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang
creates a slab cache for `struct mem_cgroup', yielding improved memory
utilization.
- The 4 patch series "add max arg to swappiness in memory.reclaim and
lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness="
argument for memory.reclaim MGLRU's lru_gen. This directs proactive
reclaim to reclaim from only anon folios rather than file-backed folios.
- The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike
Rapoport is the first step on the path to permitting the kernel to
maintain existing VMs while replacing the host kernel via file-based
kexec. At this time only memblock's reserve_mem is preserved.
- The 7 patch series "mm: Introduce for_each_valid_pfn()" from David
Woodhouse provides and uses a smarter way of looping over a pfn range.
By skipping ranges of invalid pfns.
- The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to
one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless
VMA scanning when a task is pinned a single NUMA mode. Dramatic
performance benefits were seen in some real world cases.
- The 2 patch series "JFS: Implement migrate_folio for
jfs_metapage_aops" from Shivank Garg addresses a warning which occurs
during memory compaction when using JFS.
- The 4 patch series "move all VMA allocation, freeing and duplication
logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c
into the more appropriate mm/vma.c.
- The 6 patch series "mm, swap: clean up swap cache mapping helper" from
Kairui Song provides code consolidation and cleanups related to the
folio_index() function.
- The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal
Moola does that.
- The 8 patch series "memcg: Fix test_memcg_min/low test failures" from
Waiman Long addresses some bogus failures which are being reported by
the test_memcontrol selftest.
- The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare
hook" from Lorenzo Stoakes commences the deprecation of
file_operations.mmap() in favor of the new
file_operations.mmap_prepare(). The latter is more restrictive and
prevents drivers from messing with things in ways which, amongst other
problems, may defeat VMA merging.
- The 4 patch series "memcg: decouple memcg and objcg stocks"" from
Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's
one. This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- The 6 patch series "mm/damon: minor fixups and improvements for code,
tests, and documents" from SeongJae Park is "yet another batch of
miscellaneous DAMON changes. Fix and improve minor problems in code,
tests and documents."
- The 7 patch series "memcg: make memcg stats irq safe" from Shakeel
Butt converts memcg stats to be irq safe. Another step along the way to
making memcg charging and stats updates NMI-safe, a BPF requirement.
- The 4 patch series "Let unmap_hugepage_range() and several related
functions take folio instead of page" from Fan Ni provides folio
conversions in the hugetlb code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA
ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x
Qqb/UGMEpilyre1PayQqOnct3aSL9Ao=
=tYYm
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straig reuses of the existing
chip in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently
a low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets.
-----BEGIN PGP SIGNATURE-----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=ewvq
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
The main update in size is the removal of the TI DaVinci DA830 SoC
support. DA830 is similar to DA850, which remain supported, but
only the reference board was ever supported, and we removed that
one 3 years ago as it had never been converted to devicetree.
There are some other cleanups for OMAP4 and a few boards using
old GPIO interfaces.
-----BEGIN PGP SIGNATURE-----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=8hph
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The main update in size is the removal of the TI DaVinci DA830 SoC
support. DA830 is similar to DA850, which remain supported, but only
the reference board was ever supported, and we removed that one 3
years ago as it had never been converted to devicetree.
There are some other cleanups for OMAP4 and a few boards using old
GPIO interfaces"
* tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: s3c: stop including gpio.h
ARM: dts: davinci: da850-evm: Increase fifo threshold
ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY
ARM: broadcom: MAINTAINERS: Cover bcm2712 files
bus: ti-sysc: PRUSS OCP configuration
ARM: davinci: remove support for da830
ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4
ARM: omap2plus_defconfig: enable I2C devices of GTA04
ARM: s3c/gpio: use new line value setter callbacks
ARM: scoop/gpio: use new line value setter callbacks
ARM: sa1100/gpio: use new line value setter callbacks
ARM: orion/gpio: use new line value setter callbacks
Updates are across the usual driver subsystems with SoC specific drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups for a
few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus better
support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google, aspeed,
wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung
SoCs
-----BEGIN PGP SIGNATURE-----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=RhpA
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
- Revert an x86 commit that went into 6.15 and caused idle power,
including power in suspend-to-idle, to rise rather dramatically
on systems booting with "nosmt" in the kernel command line (Rafael
Wysocki).
- Prevent freeing an uninitialized pointer in error path of
dt_idle_state_present() in the PSCI cpuidle driver (Dan Carpenter).
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy).
- Add Rust abstractions for CPUFreq framework (Viresh Kumar).
- Add Rust abstractions for OPP framework (Viresh Kumar).
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar).
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg5+xcSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO16TEH/AgeHkVPfEDWDsaPDSHmYPyITQKu6NOD
udFxbh93TTcgEOK3iradZLdZvXDpqiHqwMxoiCadETuJMvMHdUpJJ/sPG5mju9AY
lRd7ajhHNQOV4I+BIwP7CUVK3CSpnBBlBDHk/SuEbviSL+oJifeZdRvk0GTzfkz1
fbr51qAS2TfAcxI1Y+KnFbrUW6R0lC38kf7ZlMbSt5ZcWFWlLxuzrxaqeriObs7Z
jNQCypbOi/btbVkPfC+0m+qc6PVmxV22naBHWV/rqI3y5Xg6UPMTlquxO1C/K51J
p3k37pvWSwVXF4AbgsRz074QXsrugfvgbsJArq7zk180XwTj5aiY4sY=
=ADMT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These revert an x86 commit that introduced a nasty power regression on
some systems, fix PSCI cpuidle driver and ACPI cpufreq driver
regressions, add Rust abstractions for cpufreq, OPP, clk, and
cpumasks, add a Rust-based cpufreq-dt driver, and do a minor SCMI
cpufreq driver cleanup:
- Revert an x86 commit that went into 6.15 and caused idle power,
including power in suspend-to-idle, to rise rather dramatically on
systems booting with "nosmt" in the kernel command line (Rafael
Wysocki)
- Prevent freeing an uninitialized pointer in error path of
dt_idle_state_present() in the PSCI cpuidle driver (Dan Carpenter)
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy)
- Add Rust abstractions for CPUFreq framework (Viresh Kumar)
- Add Rust abstractions for OPP framework (Viresh Kumar)
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar)
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton)"
* tag 'pm-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (21 commits)
Revert "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
rust: opp: Move `cfg(CONFIG_OF)` attribute to the top of doc test
cpuidle: psci: Fix uninitialized variable in dt_idle_state_present()
rust: opp: Make the doctest example depend on CONFIG_OF
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
...
Merge Rust support for cpufreq and OPP, a new Rust-based cpufreq-dt
driver, an SCMI cpufreq driver cleanup, and an ACPI cpufreq driver
regression fix:
- Add Rust abstractions for CPUFreq framework (Viresh Kumar).
- Add Rust abstractions for OPP framework (Viresh Kumar).
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar).
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton).
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy).
* pm-cpufreq:
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
rust: opp: Move `cfg(CONFIG_OF)` attribute to the top of doc test
rust: opp: Make the doctest example depend on CONFIG_OF
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
i2c-core updates
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates
- support per-channel alias pools
- added support for dynamic address translation
(also adds FPC202 driver as its user)
- add 'static' and 'passthrough' flags
i2c-host updates
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)
-----BEGIN PGP SIGNATURE-----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=clhN
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
new machine. The migration process took longer than expected and disrupted my
workflow, but I think I'm ready to go and things should speed up from here.
Luckily, this has been a semi-quiet cycle. The core framework remains unchanged
this time around. In terms of shiny new code though, we have support for the
SpacemiT K1 SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the
usual silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is likely
because they put one SoC support inside a driver for a different SoC that is
very similar. Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along with some
Kconfig changes to make compile testing simpler and even more DT binding
conversions to boot. The exciting part is still the new SoC support like
SpacemiT and Sophgo support though, which really dominate the diffstat because
they introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to YAML
-----BEGIN PGP SIGNATURE-----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=bEFK
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
AIC100 devices generates Reliability, Availability, Serviceability events
via MHI QAIC_STATUS channel. Support such events and print a structured
log with details of the events, and if the event describes an uncorrected
error, reset the device to put it back into service. As these events may
not all be reported via other mechanisms like AER, maintain counts of
the number of errors observed for each type.
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250516160634.1408309-1-jeff.hugo@oss.qualcomm.com
Update my mail address to my new @kernel.org one and also add a mailmap
entry to make sure everything gets sent there for easier filtering.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250528221718.45204-1-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to publish
TDX "Runtime Measurement Registers" ("RTMRs") that either maintain a
hash of stored values (similar to a TPM PCR) or provide statically
provisioned data. These measurements are validated by a relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCaDj38gAKCRDfioYZHlFs
Z3EKAQC2K7RgoufBlLv4C79W8IGiUirKKQvtY9aiC7s/W8R4UwEApwV5gXQx2ImN
cEIIkAkVI2h9wJ9LHxyr3R5XfZPBGgA=
=2fTp
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi: Add driver for Dasharo devices supporting fans and
temperatures monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace using
power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering more
than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to new
variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the enlarged
scope
- power: supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and "cell
imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ABI: testing: sysfs-class-oxp:
- add missing documentation
- add tt_led attribute documentation
Add AMD ISP platform config for OV05C10:
- Add AMD ISP platform config for OV05C10
alienware-wmi-wmax:
- Add a DebugFS interface
- Add HWMON support
- Add support for manual fan control
- Add support for the "custom" thermal profile
- Expose GPIO debug methods
- Fix awcc_hwmon_fans_init() label logic
- Fix uninitialized bitmap in awcc_hwmon_fans_init()
- Improve ID processing
- Improve internal AWCC API
- Improve platform profile probe
- Modify supported_thermal_profiles[]
- Rename thermal related symbols
amd/hsmp: acpi:
- Add sysfs files to display HSMP telemetry
amd/hsmp:
- fix building with CONFIG_HWMON=m
- Report power via hwmon sensors
- Use a single DRIVER_VERSION for all hsmp modules
arm64: huawei-gaokun-ec:
- Remove unneeded semicolon
asus-wmi:
- fix build without CONFIG_SUSPEND
- Refactor Ally suspend/resume
Avoid -Wflex-array-member-not-at-end warning:
- Avoid -Wflex-array-member-not-at-end warning
barco-p50:
- use new GPIO line value setter callbacks
dell-ddv:
- Expose the battery health to userspace
- Expose the battery manufacture date to userspace
- Implement the battery matching algorithm
dell-pc:
- Propagate errors when detecting feature support
- Transition to faux device
- Use non-atomic bitmap operations
docs: ABI:
- Fix "aassociated" to "associated"
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
Documentation: ABI:
- Add sysfs platform and debugfs ABI documentation for alienware-wmi
Documentation: admin-guide: laptops:
- Add documentation for alienware-wmi
Documentation: admin-guide: pm:
- Add documentation for agent_types
- Add documentation for die_id
Documentation: wmi: alienware-wmi:
- Add GPIO control documentation
Documentation: wmi:
- Improve and update alienware-wmi documentation
Do not enable by default during compile testing:
- Do not enable by default during compile testing
hid-asus:
- check ROG Ally MCU version and warn
hwmon:
- (oxp-sensors) Add all OneXFly variants
- (oxp-sensors) Distinguish the X1 variants
int0002:
- use new GPIO line value setter callbacks
int3472:
- Add handshake pin support
- Add skl_int3472_register_clock() helper
- Avoid GPIO regulator spikes
- Debug log when remapping pins
- Drop unused gpio field from struct int3472_gpio_regulator
- Export int3472_discrete_parse_crs()
- For mt9m114 sensors map powerdown to powerenable
- Make regulator supply name configurable
- Move common.h to public includes, symbols to INTEL_INT3472
- Prepare for registering more than 1 GPIO regulator
- Remove unused sensor_config struct member
- Rework AVDD second sensor quirk handling
- Stop setting a supply-name for GPIO regulators
- Stop using devm_gpiod_get()
intel/pmc:
- Convert index variables to be unsigned
- Create Intel PMC SSRAM Telemetry driver
- Improve pmc_core_get_lpm_req()
- Move error handling to init function
- Move PMC Core related functions
- Move PMC devid to core.h
- Remove unneeded header file inclusion
- Remove unneeded io operations
- Rename core_ssram to ssram_telemetry
- Use devm for mutex_init
intel: power-domains:
- Add interface to get Linux die ID
intel-uncore-freq:
- Add attributes to show agent types
- Add attributes to show die_id
intel/vsec:
- Change return type of intel_vsec_register
Introduce dasharo-acpi platform driver:
- Introduce dasharo-acpi platform driver
ISST:
- Do Not Restore SST MSRs on CPU Online Operation
- Support SST-PP revision 2
- Support SST-TF revision 2
- Update minor version
mellanox:
- Cosmetic changes to improve code style
- Introduce support of Nvidia smart switch
- Rename field to improve code readability
mlxbf-pmc:
- Support additional PMC blocks
mlx-platform:
- Add support for new Nvidia system
mlxreg-dpu:
- Add initial support for Nvidia DPU
- Fix smatch warnings
nvsw-sn2200:
- Add support for new system flavour
- Fix .items in nvsw_sn2201_busbar_hotplug
oxpec:
- Add a lower bounds check in oxp_psy_ext_set_prop()
- Add charge threshold and behaviour to OneXPlayer
- Add support for the OneXPlayer G1
- Add turbo led support to X1 devices
- Adhere to sysfs-class-hwmon and enable pwm on 2
- Convert defines to using tabs
- Follow reverse xmas convention for tt_toggle
- Make turbo val apply a bitmask
- Move fan speed read to separate function
- Move hwmon/oxp-sensors to platform/x86
- Move pwm_enable read to its own function
- Move pwm value read/write to separate functions
- Rename ec group to tt_toggle
- Rename rval to ret in tt_toggle
portwell-ec:
- Add GPIO and WDT driver for Portwell EC
power: supply:
- add inhibit-charge-awake to charge_behaviour
power: supply: core:
- Add additional health status values
silicom:
- use new GPIO line value setter callbacks
sony-laptop:
- Remove unused sony laptop camera code
thermal/drivers/acerhdf:
- Constify struct thermal_zone_device_ops
thinkpad-acpi:
- Add support for new hotkey for camera shutter switch
tools/power/x86/intel-speed-select:
- Skip uncore frequency update
- Support SST PP revision 2 fields
- v1.23 release
tuxedo:
- Add virtual LampArray for TUXEDO NB04 devices
- Prevent invalid Kconfig state
Use strscpy()/scnprintf() with acpi_device_name/class():
- Use strscpy()/scnprintf() with acpi_device_name/class()
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaDWJ7wAKCRBZrE9hU+XO
MT8JAQDWW6qBoXuqpd6Yx1oOyROc6gJMQAsS9sNc7I60mGooEAEAnTLhOHDGkKb5
av1fz/SmXGl7joeRYkZV9FRzJ/26AAk=
=ytxa
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()
-----BEGIN PGP SIGNATURE-----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=gMwN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
A new virtio RTC driver.
vhost scsi now logs write descriptors so migration works.
Some hardening work in virtio core.
An old spec compliance issue fixed in vhost net.
A couple of cleanups, fixes in vringh, virtio-pci, vdpa.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmg2ukkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpXCYIAKvqsUujiF0W1Kv2uqrztrWVYPL5wEOgiwfD
ElxeYvkzGsaBHW1zfAxUz4az5K9qigNdm9JE55Kc79Sd/5yuLASXZtcma5d5Y4G6
JS45EhsCFxbJjtIFv2hXlTBTuo0LkxDRNzCX/CtNL/k4+H0vCn5pPfv19hUTT1T4
BH+/JA64FAquSCnMK10CG3byT8hfchlxM5TV4iQriolaOtN4gCroLp2lSzT0D2Ux
cT8e+2IwEjdx3iRkrAaNJSbpmz34xUu3TsaR7KxTZ+a0/+Zcs6aBVOhkqsyPLnPf
XK1EDwtizT+Kz6XXei+kH8sWhARQ4dU4iNn4aMKmf3937QIOSYs=
=VJy5
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A new virtio RTC driver
- vhost scsi now logs write descriptors so migration works
- Some hardening work in virtio core
- An old spec compliance issue fixed in vhost net
- A couple of cleanups, fixes in vringh, virtio-pci, vdpa
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: reject shm region if length is zero
virtio_rtc: Add RTC class driver
virtio_rtc: Add Arm Generic Timer cross-timestamping
virtio_rtc: Add PTP clocks
virtio_rtc: Add module and driver core
vringh: use bvec_kmap_local
vhost: vringh: Use matching allocation type in resize_iovec()
virtio-pci: Fix result size returned for the admin command completion
vdpa/octeon_ep: Control PCI dev enabling manually
vhost-scsi: log event queue write descriptors
vhost-scsi: log control queue write descriptors
vhost-scsi: log I/O queue write descriptors
vhost-scsi: adjust vhost_scsi_get_desc() to log vring descriptors
vhost: modify vhost_log_write() for broader users
* Add large stage-2 mapping (THP) support for non-protected guests when
pKVM is enabled, clawing back some performance.
* Enable nested virtualisation support on systems that support it,
though it is disabled by default.
* Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
* Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is automatically
extracted from the published JSON files), and helps dealing with the
evolution of the architecture.
* Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
* New selftest checking the pKVM ownership transition rules
* Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
* Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
* Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
* Add a new selftest for the SVE host state being corrupted by a
guest.
* Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
* Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
* Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
* and the usual random cleanups.
LoongArch:
* Don't flush tlb if the host supports hardware page table walks.
* Add KVM selftests support.
RISC-V:
* Add vector registers to get-reg-list selftest
* VCPU reset related improvements
* Remove scounteren initialization from VCPU reset
* Support VCPU reset from userspace using set_mpstate() ioctl
x86:
* Initial support for TDX in KVM. This finally makes it possible to use the
TDX module to run confidential guests on Intel processors. This is quite a
large series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some TDVMCALLs
to userspace, and handling several special VM exits from the TDX module.
This has been in the works for literally years and it's not really possible
to describe everything here, so I'll defer to the various merge commits
up to and including commit 7bcf7246c4 ("Merge branch 'kvm-tdx-finish-initial'
into HEAD").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg02hwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNnkwf/db4xeWKSMseCIvBVR+ObDn3LXhwT
hAgmTkDkP1zq9RfbfJSbUA1DXRwfP+f1sWySLMWECkFEQW9fGIJF9fOQRDSXKmhX
158U3+FEt+3jxLRCGFd4zyXAqyY3C8JSkPUyJZxCpUbXtB5tdDNac4rZAXKDULwe
sUi0OW/kFDM2yt369pBGQAGdN+75/oOrYISGOSvMXHxjccNqvveX8MUhpBjYIuuj
73iBWmsfv3vCtam56Racz3C3v44ie498PmWFtnB0R+CVfWfrnUAaRiGWx+egLiBW
dBPDiZywMn++prmphEUFgaStDTQy23JBLJ8+RvHkp+o5GaTISKJB3nedZQ==
=adZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c4 ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
Add Yang Shen as the maintainer of the HiSilicon SFC driver,
replacing Jay Fang.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20250529061704.190725-1-shenyang39@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Yang Shen as the maintainer of the HiSilicon SPI Controller driver,
replacing Jay Fang.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20250529061406.183992-1-shenyang39@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmg3D64SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkcIsQAK2eEc+BxQer975wzvtMg6gF9eoex4a+
rZ7jxfDzDtNvTauoQsrpehDZp0FnySaVGCU36lHGB2OvDnhCpPc5hXzKDWQpOuqQ
SHrGG3/6FTbdTG/HfHUcbNyrUzIf53SADSObiQ3qg4gyEQ3sCpcOKtVtMcU8rvsY
/HqMnsJWFaROUMjMtCcnUSgjmeY9kBvha3sTXUqgeRugEOCvZD7z4rpqFIcQqHw7
e2Fi8dwIXEYNxqPp6MRq2qdyUTewCRruE8ZIMAFuhtfYeMElUZMPlqlMENX3AzTQ
cr0EgwcFOUxRA7oZRxhoBNBsVXavtSpQr4ZDoWplxP4aQ37n5tc1E9Q72axpB/Og
FbJRl6GvWYnCd8071BczgmfHlKaTAigPvt2Z4r6JjM5I/Bij/IZ3k+On1OTuOAj/
EqfFkdZ0a5cfKrwUMP+oSGtSAywkMVUtnIKJlZeRbjSj2432sCfe2jVAlS8ELM43
3LUgXYrAKtA87g171LlsRu5EEpI5QmqPb+i5LpPlEXe2TJEgPisyfecJ3NafF/2+
j575lm+TFNm9NTNhGGjDPEvw0djI5wSGGMe9J4gC74eWi6s5t6C4cuUf84TKWdwR
x+9H0IB7rfFncAwXHJuUUtzd+fPHaYzs5dDGbSgMQOXr1cr1wlubCK8mQ1r/Wt/a
3GjFIOQKW2Q5
=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
The marquee feature for this release is that the limit on the
maximum rsize and wsize has been raised to 4MB. The default remains
at 1MB, but risk-seeking administrators now have the ability to try
larger I/O sizes with NFS clients that support them. Eventually the
default setting will be increased when we have confidence that this
change will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can
add experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can
be lifted.
Many thanks to the contributors, reviewers, testers, and bug
reporters who participated during the v6.16 development cycle.
-----BEGIN PGP SIGNATURE-----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=FbeG
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
* Some cleanups and refactorings, preparing for an upcoming big series
-----BEGIN PGP SIGNATURE-----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=KT//
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Fix interaction between some filesystems and Secure Execution
* Some cleanups and refactorings, preparing for an upcoming big series
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
-----BEGIN PGP SIGNATURE-----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=4pGJ
-----END PGP SIGNATURE-----
Merge tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
Refactor some gmap functions; move the implementation into a separate
file with only helper functions. The new helper functions work on vm
addresses, leaving all gmap logic in the gmap functions, which mostly
become just wrappers.
The whole gmap handling is going to be moved inside KVM soon, but the
helper functions need to touch core mm functions, and thus need to
stay in the core of kernel.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250528095502.226213-4-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250528095502.226213-4-imbrenda@linux.ibm.com>
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC plugins,
the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaDUq9gAKCRA2KwveOeQk
u+ZCAQDhqpOE/yn5gfjyplIvaTtzj9CaW6g11AmPYrimJCuj3QD9G+0o35kzlXOw
f0ZIj2U7LFNgbLos+20hQwhMFf1Zhgg=
=OYzD
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
This bulk of the changes in this release are driver work, as well as
new device support we have some important work on performance over
several drivers, and big overhauls for maintainability on a couple too.
Highlights include:
- Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of
the NXP FSPI driver from Haibo Chen.
- Performance improvements for the AXI SPI engine.
- Support for writes to memory mapped flashes on Renesas devices.
- Integrated DMA support for Tegra210 QSPI, used by the Tegra234.
- DMA support for Amlogic SPI controllers.
- Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip
RK3528 and Samsung Exynos Autov920.
An update to fix some issues with the Atmel QSPI driver runtime PM
pulled in a new API from the PM core, and the Renesas memory mapped
write changes pull in some code that's shared in drivers/memory.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgzCzkACgkQJNaLcl1U
h9DF5gf+MlaB2j6ggH/OnXdV6aQTcjta357+ptWH3CDQbx0nsMj50i+eqxhzOK69
tyOMX0gcqo8bBQq1mhm3Z2fDYbYYRKwf7OwymHD1KGNGn9zegORNw790/XGTeoMo
m5f9Trz9UNP+7NjWuOioKoy6zghp4Ti2WAAUPhGUQBnyaV269bonNvisRtqnDP5u
nOu1DYANZqL3icuUIdJ3Aklmn4On1svUPuE9HOn/GNocZZWegcCHfBjmSRuLUAGO
RR1jP/d+RfSvTSrdqZGwrfWLFBBirjSLXNB1g7sjiVTnSseuBnOZ/z7PuBQQ+NuB
ENyoQXNLFZKMTQ5wmuQpXnwIIXsxYg==
=FmJ2
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The bulk of the changes in this release are driver work, as well as
new device support we have some important work on performance over
several drivers, and big overhauls for maintainability on a couple
too. Highlights include:
- Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of
the NXP FSPI driver from Haibo Chen
- Performance improvements for the AXI SPI engine
- Support for writes to memory mapped flashes on Renesas devices
- Integrated DMA support for Tegra210 QSPI, used by the Tegra234
- DMA support for Amlogic SPI controllers
- Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip
RK3528 and Samsung Exynos Autov920
An update to fix some issues with the Atmel QSPI driver runtime PM
pulled in a new API from the PM core, and the Renesas memory mapped
write changes pull in some code that's shared in drivers/memory"
* tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
spi: spi-qpic-snand: return early on error from qcom_spi_io_op()
spi: loopback-test: fix up const pointer issue in rx_ranges_cmp()
spi: gpio: fix const issue in spi_to_spi_gpio()
spi: spi-qpic-snand: remove superfluous parameters of qcom_spi_check_error()
dt-bindings: spi: samsung: add exynosautov920-spi compatible
spi: spi-qpic-snand: reuse qcom_spi_check_raw_flash_errors()
spi: dt-bindings: Add rk3528-spi compatible
spi: spi_amd: Update Kconfig dependencies
spi: spi_amd: Add HIDDMA basic write support
spi: spi_amd: Remove read{q,b} usage on DMA buffer
spi: sh-msiof: Move register definitions to <linux/spi/sh_msiof.h>
spi: sh-msiof: Document frame start sync pulse mode
spi: sh-msiof: Double maximum DMA transfer size using two groups
spi: sh-msiof: Simplify BRG's Division Ratio
spi: sh-msiof: Increase TX FIFO size for R-Car V4H/V4M
spi: sh-msiof: Correct RX FIFO size for R-Car Gen3
spi: sh-msiof: Correct RX FIFO size for R-Car Gen2
spi: sh-msiof: Add core support for dual-group transfers
spi: sh-msiof: Correct SIMDR2_GRPMASK
spi: sh-msiof: SIFCTR bitfield conversion
...
This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs. We did gain support for Analog ADP5055 and TI TPS65214 devices,
and there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's minor
fixes and API updates.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgzBksACgkQJNaLcl1U
h9DfSQf+KAyyETqQ504yew2Yin0jdPsHrlrPw9OmK/4gwk9DNvzAELGBqolQWaEV
vDaLniVbqDoFDZECDKfKHPkw1GRjo8CUd1JaMcEv+cUHvdO7cyRR/44Kguuc78Q7
nkaBrgyYA9iK+3hH3t7aK4oKHcLzAcdrFHgAIm5P0mld0pr1UrQmYlsQpvEEAhEb
TpxT+9V04DjPbpyNC4k0GCvJS1EXaS2X3kjKnowTSylCdxxGC7HbQK1QX0OSEvWV
5wJz+46bmcjAggf4PM8DlFtLCmLdMlb2+g0iNfikwvvBVBe0fhDW657apSTq18XS
+K9bnCEupseehFA/r+gjh1EFjFWPLQ==
=QoGH
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs.
We did gain support for Analog ADP5055 and TI TPS65214 devices, and
there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's
minor fixes and API updates"
* tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: qcom_spmi: Constify struct spmi_voltage_range
regulator: max8952: Correct Samsung "Electronics" spelling in copyright headers
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
regulator: gpio: Use dev_err_probe
regulator: pca9450: Add restart handler
regulator: da9121: Fix Wvoid-pointer-to-enum-cast warning
regulator: tps65219: Add TI TPS65214 Regulator Support
regulator: tps65219: Add support for TPS65215 Regulator IRQs
regulator: tps65219: Add support for TPS65215 regulator resources
regulator: tps65219: Update struct names
regulator: pf9453: convert to use maple tree register cache
regulator: max20086: Change enable gpio to optional
regulator: max20086: Fix MAX200086 chip id
regulator: adp5055: Remove unneeded semicolon
regulator: adp5055: remove duplicate device table
regulator: adp5055: Add driver for adp5055
regulator: dt-bindings: adi,adp5055-regulator: Add adp5055 support
regulator: don't compare raw GPIO descriptor pointers
regulator: rpi-panel-attiny: use new GPIO line value setter callbacks
regulator: rpi-panel-attiny: use lock guards for the state mutex
...
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----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=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
* ASoC:
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices; not much used as of this writing, rather for
future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip
SAI controllers
* HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
* USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
* Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes
-----BEGIN PGP SIGNATURE-----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=ApEf
-----END PGP SIGNATURE-----
Merge tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
ASoC:
- Support for automatically enumerating DAIs from standards
conforming SoundWire SDCA devices; not much used as of this
writing, rather for future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and
Rockchip SAI controllers
HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes"
* tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits)
firmware: cs_dsp: Fix OOB memory read access in KUnit test
ASoC: codecs: add support for ES8375
ASoC: dt-bindings: Add Everest ES8375 audio CODEC
ALSA: hda: acpi: Make driver's match data const static
ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS()
ALSA: atmel: Replace deprecated strcpy() with strscpy()
ALSA: core: fix up bus match const issues.
ASoC: wm_adsp: Make cirrus_dir const
ASoC: tegra: Tegra264 support in isomgr_bw
ASoC: tegra: AHUB: Add Tegra264 support
ASoC: tegra: ADX: Add Tegra264 support
ASoC: tegra: AMX: Add Tegra264 support
ASoC: tegra: I2S: Add Tegra264 support
ASoC: tegra: Update PLL rate for Tegra264
ASoC: tegra: ASRC: Update ARAM address
ASoC: tegra: ADMAIF: Add Tegra264 support
ASoC: tegra: CIF: Add Tegra264 support
dt-bindings: ASoC: Document Tegra264 APE support
dt-bindings: ASoC: admaif: Add missing properties
ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property
...
This time around the pwm changes for the next release contain three new
drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual collection of
cleanups in both the core and drivers, support for new variants in
existing drivers, conversion of dt bindings to yaml and documentation
updates.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmgzfgYACgkQj4D7WH0S
/k5nJggAoGbk5rGkAMzTNvrQxJLkS2MFQclHyiW+QQu3pOmIcK9rDYP7GI7LNHl5
PBfFGkeWmabdVyMwej87kNarrHLQxHvCfS8Ooc1rGYgaARhJhE2N2/xKLxNQPnhe
ZL95O6jcubdllOdHpaWHGaMkPvw4QVMZD9uRuy7ikuf+EiuUhqsqdMQix3x6RXc4
43XLJ1N5SNeHDdF8LVNEwnNwzYFjtLK94dEajPPw+EsiHQ/DyAEohl3vA6k4duxX
OnN5BA39SadBWLD4zZLj8LWZC38/1mEx+FUat5ub2q/Buj2/2rxg60Gp+0jyrDMK
44t3wlIM/VHpTzLN1Zh1UpY0bM8eIg==
=Y7Ef
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time around the pwm changes for the next release contain three
new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual
collection of cleanups in both the core and drivers, support for new
variants in existing drivers, conversion of dt bindings to yaml and
documentation updates.
Thanks for contributions and reviews go to Alexey Charkov,
AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin
Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark,
Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto,
Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor
Gamblin"
* tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits)
dt-bindings: timer: renesas,tpu: remove binding documentation
pwm: adp5585: make sure to include mod_devicetable.h
pwm: Tidyup PWM menu for Renesas
pwm: Restore alphabetic ordering in Kconfig and Makefile
pwm: Formally describe the procedure used to pick a hardware waveform setting
pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up
pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests
ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB
arm64: defconfig: Add Renesas MSIOF sound support
arm64: defconfig: Enable Renesas RZ/G2L GPT config
pwm: add support for NXPs high-side switch MC33XS2410
dt-bindings: pwm: add support for MC33XS2410
pwm: rzg2l-gpt: Accept requests for too high period length
dt-bindings: pwm: vt8500-pwm: Convert to YAML
dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893
pwm: Fix various formatting issues in kernel-doc
pwm: Add support for RZ/G2L GPT
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Better document return value of pwm_round_waveform_might_sleep()
pwm: loongson: Fix an error code in probe()
...
Highlights:
* New supported architectures: m68k, SPARC (32 and 64 bit)
* Compatibility with kselftest_harness.h
* A more robust mechanism to include all of nolibc from each header
* Split existing features into new headers to simplify adoption
* Compatibility with UBSAN and it is used in the testsuite
* Many small new features focussing on usage in kselftests
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCaDTMAgAKCRDB+h1jyw5b
ONycAQD35X+ca33v05Zup3oEne2zZtKqeRlStcFTp2AY03MpngEA46IsX5yBf1Hj
GgsmC/RFGicF9RjaymgdAB5WOg0CeAc=
=tjwV
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- New supported architectures: m68k, SPARC (32 and 64 bit)
- Compatibility with kselftest_harness.h
- A more robust mechanism to include all of nolibc from each header
- Split existing features into new headers to simplify adoption
- Compatibility with UBSAN and it is used in the testsuite
- Many small new features focussing on usage in kselftests
* tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits)
selftests: harness: Stop using setjmp()/longjmp()
selftests: harness: Add "variant" and "self" to test metadata
selftests: harness: Add teardown callback to test metadata
selftests: harness: Move teardown conditional into test metadata
selftests: harness: Don't set setup_completed for fixtureless tests
selftests: harness: Implement test timeouts through pidfd
selftests: harness: Remove dependency on libatomic
selftests: harness: Remove inline qualifier for wrappers
selftests: harness: Mark functions without prototypes static
selftests: harness: Ignore unused variant argument warning
selftests: harness: Use C89 comment style
selftests: harness: Add kselftest harness selftest
selftests/nolibc: drop include guards around standard headers
tools/nolibc: move NULL and offsetof() to sys/stddef.h
tools/nolibc: move uname() and friends to sys/utsname.h
tools/nolibc: move makedev() and friends to sys/sysmacros.h
tools/nolibc: move getrlimit() and friends to sys/resource.h
tools/nolibc: move reboot() to sys/reboot.h
tools/nolibc: move prctl() to sys/prctl.h
tools/nolibc: move mount() to sys/mount.h
...
- The most significant change is the replacement of the old kernel-doc
script (a monstrous collection of Perl regexes that predates the Git era)
with a Python reimplementation. That, too, is a horrifying collection of
regexes, but in a much cleaner and more maintainable structure that
integrates far better with the Sphinx build system.
This change has been in linux-next for the full 6.15 cycle; the small
number of problems that turned up have been addressed, seemingly to
everybody's satisfaction. The Perl kernel-doc script remains in tree (as
scripts/kernel-doc.pl) and can be used with a command-line option if need
be. Unless some reason to keep it around materializes, it will probably
go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
=BQ9X
-----END PGP SIGNATURE-----
Merge tag 'docs-6.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
multiple architectures can share the fs API for manipulating their
respective hw resource control implementation. This is the second step
in the work towards sharing the resctrl filesystem interface, the next
one being plugging ARM's MPAM into the aforementioned fs API.
-----BEGIN PGP SIGNATURE-----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=eNCr
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Carve out the resctrl filesystem-related code into fs/resctrl/ so that
multiple architectures can share the fs API for manipulating their
respective hw resource control implementation.
This is the second step in the work towards sharing the resctrl
filesystem interface, the next one being plugging ARM's MPAM into the
aforementioned fs API"
* tag 'x86_cache_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
MAINTAINERS: Add reviewers for fs/resctrl
x86,fs/resctrl: Move the resctrl filesystem code to live in /fs/resctrl
x86/resctrl: Always initialise rid field in rdt_resources_all[]
x86/resctrl: Relax some asm #includes
x86/resctrl: Prefer alloc(sizeof(*foo)) idiom in rdt_init_fs_context()
x86/resctrl: Squelch whitespace anomalies in resctrl core code
x86/resctrl: Move pseudo lock prototypes to include/linux/resctrl.h
x86/resctrl: Fix types in resctrl_arch_mon_ctx_{alloc,free}() stubs
x86/resctrl: Move enum resctrl_event_id to resctrl.h
x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl
fs/resctrl: Add boiler plate for external resctrl code
x86/resctrl: Add 'resctrl' to the title of the resctrl documentation
x86/resctrl: Split trace.h
x86/resctrl: Expand the width of domid by replacing mon_data_bits
x86/resctrl: Add end-marker to the resctrl_event_id enum
x86/resctrl: Move is_mba_sc() out of core.c
x86/resctrl: Drop __init/__exit on assorted symbols
x86/resctrl: Resctrl_exit() teardown resctrl but leave the mount point
x86/resctrl: Check all domains are offline in resctrl_exit()
x86/resctrl: Rename resctrl_sched_in() to begin with "resctrl_arch_"
...
Add the virtio_rtc module and driver core. The virtio_rtc module implements
a driver compatible with the proposed Virtio RTC device specification.
The Virtio RTC (Real Time Clock) device provides information about current
time. The device can provide different clocks, e.g. for the UTC or TAI time
standards, or for physical time elapsed since some past epoch. The driver
can read the clocks with simple or more accurate methods.
Implement the core, which interacts with the Virtio RTC device. Apart from
this, the core does not expose functionality outside of the virtio_rtc
module. Follow-up patches will expose PTP clocks and an RTC Class device.
Provide synchronous messaging, which is enough for the expected time
synchronization use cases through PTP clocks (similar to ptp_kvm) or RTC
Class device.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-2-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power,
cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair
copper, compliant with IEEE 802.3.
The driver implements basic features such as:
- Device initialization
- RGMII interface timing configuration
- Wake-on-LAN support
- LED initialization and control via /sys/class/leds
This driver has been tested on multiple Variscite boards, including:
- VAR-SOM-MX93 (i.MX93)
- VAR-SOM-MX8M-PLUS (i.MX8MP)
Example boot log showing driver probe:
[ 7.692101] imx-dwmac 428a0000.ethernet eth0:
PHY [stmmac-0:00] driver [MXL86110 Gigabit Ethernet] (irq=POLL)
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250521212821.593057-1-stefano.radaelli21@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to: Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, Viktor Malik
-----BEGIN PGP SIGNATURE-----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=dsj5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz
Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby
(SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay
Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy,
Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav
Jain, Venkat Rao Bagalkote, and Viktor Malik.
* tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits)
MAINTAINERS: powerpc: Remove myself as a reviewer
powerpc/iommu: Use str_disabled_enabled() helper
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
powerpc/mm/fault: Use str_write_read() helper function
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
powerpc/kernel: Fix ppc_save_regs inclusion in build
powerpc: Transliterate author name and remove FIXME
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
powerpc/8xx: Reduce alignment constraint for kernel memory
powerpc/boot: Fix build with gcc 15
powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
powerpc/pseries/htmdump: Add htm flags support to htmdump module
powerpc/pseries/htmdump: Add htm setup support to htmdump module
powerpc/pseries/htmdump: Add htm info support to htmdump module
powerpc/pseries/htmdump: Add htm status support to htmdump module
powerpc/pseries/htmdump: Add htm start support to htmdump module
powerpc/pseries/htmdump: Add htm configure support to htmdump module
...
Summary of changes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
-----BEGIN PGP SIGNATURE-----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=6mun
-----END PGP SIGNATURE-----
Merge tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Joel Fernandes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
rcutorture: Fix issue with re-using old images on ARM64
rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
rcutorture: Reduce TREE01 CPU overcommit
torture: Check for "Call trace:" as well as "Call Trace:"
rcutorture: Perform more frequent testing of ->gpwrap
torture: Add testing of RCU's Rust bindings to torture.sh
torture: Add --do-{,no-}normal to torture.sh
checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
rcutorture: Comment invocations of tick_dep_set_task()
rcu/nocb: Add Safe checks for access offloaded rdp
rcuscale: using kcalloc() to relpace kmalloc()
doc/RCU/listRCU: refine example code for eliminating stale data
doc: Update LWN RCU API links in whatisRCU.rst
Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
rust: sync: rcu: Mark Guard methods as inline
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
rcu: Remove swake_up_one_online() bandaid
MAINTAINERS: Update Zqiang's email address
rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
srcu: Use rcu_seq_done_exact() for polling API
...
API:
- Fix memcpy_sglist to handle partially overlapping SG lists.
- Use memcpy_sglist to replace null skcipher.
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK.
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS.
- Hide CRYPTO_MANAGER.
- Add delayed freeing of driver crypto_alg structures.
Compression:
- Allocate large buffers on first use instead of initialisation in scomp.
- Drop destination linearisation buffer in scomp.
- Move scomp stream allocation into acomp.
- Add acomp scatter-gather walker.
- Remove request chaining.
- Add optional async request allocation.
Hashing:
- Remove request chaining.
- Add optional async request allocation.
- Move partial block handling into API.
- Add ahash support to hmac.
- Fix shash documentation to disallow usage in hard IRQs.
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64.
- Drop avx10_256 xts(aes)/ctr(aes) on x86.
- Improve avx-512 optimisations for xts(aes).
- Move chacha arch implementations into lib/crypto.
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm.
- Disable powerpc/poly1305 as it has no SIMD fallback.
- Move sha256 arch implementations into lib/crypto.
- Convert deflate to acomp.
- Set block size correctly in cbcmac.
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss.
- Fix warm-reboot failure by making shutdown do more work in qat.
- Add locking in zynqmp-sha.
- Remove cavium/zip.
- Add support for PCI device 0x17D8 to ccp.
- Add qat_6xxx support in qat.
- Add support for RK3576 in rockchip-rng.
- Add support for i.MX8QM in caam.
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up.
- Add new SEV/SNP platform shutdown API in ccp.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmgz47AACgkQxycdCkmx
i6fvKRAAr4Xa903L0r1Q1P1alQqoFFCqimUWeH72m68LiWynHWi0lUo0z/+tKweg
mnPStz7/Ha9HRHJjdNCMPnlJqXQDkuH3bIOuBJCwduDuhHo9VGOd46XGzmGMv3gb
HKuZhI0lk7pznK3CSyD/2nHmbDCHD+7feTZSBMoN9mm875+aSoM6fdxgak8uPFcq
KbB1L+hObTn2kAPSqRrNOR8/xG2N7hdH8eax7Li+LAtqYNVT5HvWVECsB/CKRPfB
sgAv3UTzcIFapSSHUHaONppSeoqPAIAeV7SdQhJvlT+EUUR/h/B6+D9OUQQqbphQ
LBalgTnqMKl0ymDEQFQ6QyYCat9ZfNmDft2WcXEsxc8PxImkgJI1W3B8O51sOjbG
78D8JqVQ96dleo4FsBhM2wfG0b41JM6zU4raC4vS7a3qsUS+Q1MpehvcS1iORicy
SpGdE8e7DLlxKhzWyW1xJnbrtMZDC7Sa2hUnxrvP0/xOvRhChKscRVtWcf0a5q7X
8JmuvwVSOJuSbQ3MeFbQvpo5lR9+0WsNjM6e9miiH6Y7vZUKmWcq2yDp377qVzeh
7NK6+OwGIQZZExrmtPw2BXwssT9Eg+ks6Y7g2Ne7yzvrjVNfEPY7Cws/5w7p8mRS
qhrcpbJNFlWgD7YYkmGZFTQ8DCN25ipP8lklO/hbcfchqLE/o1o=
=O8L5
-----END PGP SIGNATURE-----
Merge tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaDNd3xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKz0tAQCDqDA4Jd/54nnKpChMlKH8MTQDuwfz
8GHZi50mn4Rw5gD/f+hOGItPfswBId/+MZy+rKWL7bE2e9DdJdtoqRRtwA4=
=RWFl
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: add SPDX license identifier
lib/crc16: unexport crc16_table and crc16_byte()
w1: ds2406: use crc16() instead of crc16_byte() loop
MAINTAINERS: add crc_kunit.c back to CRC LIBRARY
lib/crc: make arch-optimized code use subsys_initcall
crypto: crc32 - remove "generic" from file and module names
x86/crc: drop "glue" from filenames
sparc/crc: drop "glue" from filenames
s390/crc: drop "glue" from filenames
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
powerpc/crc: drop "glue" from filenames
arm64/crc: drop "glue" from filenames
arm/crc: drop "glue" from filenames
s390/crc32: Remove no-op module init and exit functions
s390/crc32: Remove have_vxrs static key
lib/crc: make the CPU feature static keys __ro_after_init
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEEsH5R1a/fCoV1sAS4bgaPnkoY3cFAmgm4zAWHGEuaGluZGJv
cmdAa2VybmVsLm9yZwAKCRDhuBo+eShjd8+nD/4xLZRdP5/Sq8boG/ZjPwja8ATv
MjSrakeOHFPJx+ac/QNmhkWmVQrpazA72YU9NN5VL9UdM+eFHJ4EmFIUQFcKsYhU
edj5Fyegc2/CzY4wPcJQcY4ck9n6xoWqR//75uEtHRfMVAwJguQ7/qg7XR+Skhy7
RSuJ96qi2uf6ktrZUGVilkF+tjhg0j9eoiJUnU+2d5khT/vqlezv/x6xC1Vxr5WK
JgsIhg9NzEc3BjZotmurZ7WaAIFey83ta8r7fwQM+SfSqMbLbdXu3XNQ5v9MBbBO
YDsxl2LD2ukCzucbY5h6/h1TjQ+IBUSx9ExEq0ATG46HzMGBc7EFMYb3Q2klaSX2
lfK5YKvZVFPZUp1Yr94+YIvyhU6g0dtDELOBVB5lj1FHv7wqDOUY9wofh+tLgyMT
PTp/sYHc7UUvPghFMNhrkbGaIrUI2fRZviTgAJGOp2zE2gvV2lz4Jg9UvBkbpezc
q8X6xx+3r1dj5MhlrjeLifLWiXaZhumT2D5TEwYl3LjKLzekFKCMoqJ5eqFPSty9
vvp5uBk7siErAlAi3xq19HWmrGoacMg0tPqe9QElkA2jzBzNBcEdo7NQAAOzjkg+
NA58fKyrcmKrI7Y1NQmHTmx1RIUOWPXyW7ddZS8CGgsDzlVH35gIBPFqmj235tSq
67Rtb/Iev7KtPL0z8w==
=d1MQ
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Allow creation of rw files with custom permissions. This allows
drivers to better protect secrets written through configfs
- Fix a bug where an error condition did not cause an early return
while populating attributes
- Report ENOMEM rather than EFAULT when kvasprintf() fails in
config_item_set_name()
- Add a Rust API for configfs. This allows Rust drivers to use configfs
through a memory safe interface
* tag 'configfs-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
MAINTAINERS: add configfs Rust abstractions
rust: configfs: add a sample demonstrating configfs usage
rust: configfs: introduce rust support for configfs
configfs: Correct error value returned by API config_item_set_name()
configfs: Do not override creating attribute file failure in populate_attrs()
configfs: Delete semicolon from macro type_print() definition
configfs: Add CONFIGFS_ATTR_PERM helper
-----BEGIN PGP SIGNATURE-----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=1PNK
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmgu4Z8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnBV7B/9i36vJXJuRMvLhP6vQNeEtixa5YkWe
AZ/ALtAlYVzQXIKYJs7st+bxzQLmN7BfvcGdtXmtgIsNttNL1Kl1asvKFuRN3hqp
CNjH83vqmoJMbKjcnPmxi/t3IfprfTU99g34gz5ayJN15rYptQAZRIFoX63Di6jC
XvJbhM2ztJqHA5o5kMseCJ8kRq+RCAunI5Z1hltaAUWmypdc1RPWAJQed4x1ssSM
8ctyWGy32ctyIoZ+B8tXzE3FoTay5UditN0lfdOe9pE+j6ZeYZRKdquKh4gLvK9c
mFjxQm/TqbWWIWuts30iy2dp2PgNEyFrcJUZWu8/y5rhZSQQeqzQww8v
=ILU2
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-05-22
this is a pull request of 22 patches for net-next/main.
The series by Biju Das contains 19 patches and adds RZ/G3E CANFD
support to the rcar_canfd driver.
The patch by Vincent Mailhol adds a struct data_bittiming_params to
group FD parameters as a preparation patch for CAN-XL support.
Felix Maurer's patch imports tst-filter from can-tests into the kernel
self tests and Vincent Mailhol adds support for physical CAN
interfaces.
linux-can-next-for-6.16-20250522
* tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
selftests: can: test_raw_filter.sh: add support of physical interfaces
selftests: can: Import tst-filter from can-tests
can: dev: add struct data_bittiming_params to group FD parameters
can: rcar_canfd: Add RZ/G3E support
can: rcar_canfd: Enhance multi_channel_irqs handling
can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info
can: rcar_canfd: Update RCANFD_GAFLCFG macro
can: rcar_canfd: Add rcar_canfd_setrnc()
can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro
can: rcar_canfd: Update RCANFD_GERFL_ERR macro
can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro
can: rcar_canfd: Use of_get_available_child_by_name()
...
====================
Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
or aren't considered necessary for -stable kernels. 19 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDLNqwAKCRDdBJ7gKXxA
juanAQD4aZn7ACTpbIgDIlLVJouq6OOHEYye9hhxz19UN2mAUgEAn8jPqvBDav3S
HxjMFSdgLUQVO03FCs9tpNJchi69nw0=
=R3UI
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"22 hotfixes.
13 are cc:stable and the remainder address post-6.14 issues or aren't
considered necessary for -stable kernels. 19 are for MM"
* tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mailmap: add Jarkko's employer email address
mm: fix copy_vma() error handling for hugetlb mappings
memcg: always call cond_resched() after fn()
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
mm: vmalloc: only zero-init on vrealloc shrink
mm: vmalloc: actually use the in-place vrealloc region
alloc_tag: allocate percpu counters for module tags dynamically
module: release codetag section when module load fails
mm/cma: make detection of highmem_start more robust
MAINTAINERS: add mm memory policy section
MAINTAINERS: add mm ksm section
kasan: avoid sleepable page allocation from atomic context
highmem: add folio_test_partial_kmap()
MAINTAINERS: add hung-task detector section
taskstats: fix struct taskstats breaks backward compatibility since version 15
mm/truncate: fix out-of-bounds when doing a right-aligned split
MAINTAINERS: add mm reclaim section
MAINTAINERS: update page allocator section
mm: fix VM_UFFD_MINOR == VM_SHADOW_STACK on USERFAULTFD=y && ARM64_GCS=y
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled
...
Rewrite the textual description for the WonderMedia I2C controller
as YAML schema, and switch the filename to follow the compatible
string.
The controller only supports two bus speeds (100kHz and 400kHz)
so restrict clock-frequency values accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250506-vt8500-i2c-binding-v3-1-401c3e090a88@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
I'm working on a Samsung device which includes this MFD and would like
to be Cc'ed to further contributions and help on reviewing them. Add me
as reviewer.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-32-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
sec_irq_init() is an internal API for the core driver, and doesn't
belong into the public header.
Due to an upcoming split of the driver into a core and i2c driver,
we'll also be adding more internal APIs, which again shouldn't be in
the public header.
Move it into a new internal include.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-7-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Currently kernel/fork.c both contains absolutely key logic relating to a
number of kernel subsystems and also has absolutely no assignment in
MAINTAINERS.
Correct this by placing this file in relevant sections - mm core, exec and
the scheduler so people know who to contact when making changes here.
scripts/get_maintainers.pl can perfectly well handle a file being in
multiple sections, so this functions correctly.
Intent is that we keep putting changes to kernel/fork.c through Andrew's
tree.
Link: https://lkml.kernel.org/r/20250513145706.122101-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgvRsEACgkQJNaLcl1U
h9DInQf/SD/3ygLJOY3h7YMcY8ua39Jcu01cDtJ4F8Aezt2T+hTppxd/uUqPYiyM
UcS6B+0yzFbtpKrtdectPoYIBYBXcoH34tnDn0/Qj9yaYX9BzFV1j6meIPJA10Wv
CdCG35QKNamxL7PfCq/QxekWuS91TcRDZLzsX04lme5jm12q89/mWtenMIlAtRXH
JCaVp6CzGaXBMpTJYK3uQ9DwszqMnSLmkoPvXJQAr8ymOJ/emOMY9uKPF5nSYtEU
4T4jbIvt/stR5vsfgRUgOPuXquf2oupExgzOPdGWXWSGOg23QeiJcfeE+7OH1bAf
k551jztnqivFhY5Ad72iipiaPYhSzw==
=G6Xw
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
subsystems and follow-ups for the recent netdev locking changes,
anyhow there are no known pending regressions.
Including fixes from bluetooth, ipsec and CAN.
Current release - regressions:
- eth: team: grab team lock during team_change_rx_flags
- eth: bnxt_en: fix netdev locking in ULP IRQ functions
Current release - new code bugs:
- xfrm: ipcomp: fix truesize computation on receive
- eth: airoha: fix page recycling in airoha_qdma_rx_process()
Previous releases - regressions:
- sched: hfsc: fix qlen accounting bug when using peek in hfsc_enqueue()
- mr: consolidate the ipmr_can_free_table() checks.
- bridge: netfilter: fix forwarding of fragmented packets
- xsk: bring back busy polling support in XDP_COPY
- can:
- add missing rcu read protection for procfs content
- kvaser_pciefd: force IRQ edge in case of nested IRQ
Previous releases - always broken:
- xfrm: espintcp: remove encap socket caching to avoid reference leak
- bluetooth: use skb_pull to avoid unsafe access in QCA dump handling
- eth: idpf:
- fix null-ptr-deref in idpf_features_check
- fix idpf_vport_splitq_napi_poll()
- eth: hibmcge: fix wrong ndo.open() after reset fail issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=W+1w
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is somewhat larger than what I hoped for, with a few PRs from
subsystems and follow-ups for the recent netdev locking changes,
anyhow there are no known pending regressions.
Including fixes from bluetooth, ipsec and CAN.
Current release - regressions:
- eth: team: grab team lock during team_change_rx_flags
- eth: bnxt_en: fix netdev locking in ULP IRQ functions
Current release - new code bugs:
- xfrm: ipcomp: fix truesize computation on receive
- eth: airoha: fix page recycling in airoha_qdma_rx_process()
Previous releases - regressions:
- sched: hfsc: fix qlen accounting bug when using peek in
hfsc_enqueue()
- mr: consolidate the ipmr_can_free_table() checks.
- bridge: netfilter: fix forwarding of fragmented packets
- xsk: bring back busy polling support in XDP_COPY
- can:
- add missing rcu read protection for procfs content
- kvaser_pciefd: force IRQ edge in case of nested IRQ
Previous releases - always broken:
- xfrm: espintcp: remove encap socket caching to avoid reference leak
- bluetooth: use skb_pull to avoid unsafe access in QCA dump handling
- eth: idpf:
- fix null-ptr-deref in idpf_features_check
- fix idpf_vport_splitq_napi_poll()
- eth: hibmcge: fix wrong ndo.open() after reset fail issue"
* tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-af: Fix APR entry mapping based on APR_LMT_CFG
octeontx2-af: Set LMT_ENA bit for APR table entries
net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done
octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf
selftests/tc-testing: Add an HFSC qlen accounting test
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
idpf: fix idpf_vport_splitq_napi_poll()
net: hibmcge: fix wrong ndo.open() after reset fail issue.
net: hibmcge: fix incorrect statistics update issue
xsk: Bring back busy polling support in XDP_COPY
can: slcan: allow reception of short error messages
net: lan743x: Restore SGMII CTRL register on resume
bnxt_en: Fix netdev locking in ULP IRQ functions
MAINTAINERS: Drop myself to reviewer for ravb driver
net: dwmac-sun8i: Use parsed internal PHY address instead of 1
net: ethernet: ti: am65-cpsw: Lower random mac address error print to info
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
idpf: fix null-ptr-deref in idpf_features_check
...
Commit 835a0c10d3 ("leds: Rename simple directory to simatic") renames
the driver's directory to drivers/leds/simatic, but misses to adjust the
SIEMENS IPC LED DRIVERS section in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference. Adjust the file entry to this renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250325092159.213463-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.
There is a known merge conflict due to changes in neighbouring lines.
Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/
Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics. Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!
Includes the usual mix of new device support, features and general
cleanup.
This time we also have some tree wide changes.
- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
with. This series includes quite a few related cleanups such as use
of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
iio_device_claim/release_direct() which is structured so that sparse
can warn on failed releases. There were a few false positives but
those were mostly in code that benefited from being cleaned up as part
of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
version over time. This version takes the size of the supplied buffer
which the core checks is at least as big as expected by calculation
from channel descriptions of those channels enabled. Use this in
an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
correctly aligned buffers for timestamps being added onto the end of
channel data.
New device support
------------------
adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
MT8173.
meson-saradc
- Support the GXLX SoCs. Mostly this is a workaround for some unrelated
clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
functionality of the already supported bd79703. Included making this
driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.
Features
--------
Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
things like generated ramps for testing purposes. Enable this for
adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
Get the interrupt by name, but fallback to previous assumption on the first
being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
parts already supported by this driver. Includes some general driver
cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
the supply.
winsen,mhz19b
- New driver for this C02 sensor.
Cleanup and minor fixes
-----------------------
dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
default anyway.
adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
for a messy definition that has to work for all supported parts.
Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmgt1EgRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0Foii3g//bZJT2/rHGIkU/MKUsYQCZGh5ux7X59Kk
DT8R7i8RYg2dshbtkkHUn/S6yC3OX84q3Legzy8TtHkPvGMK1NSwWCrn2cqkCZdG
4kksfq3P41FmRrpSfm4p+WSAD9nYzA/LToSLdwGIOa44lKxlCElBgsIDz/HxwXLB
N08H5jniST+cmSWAkkxCj15jcKXGtuIUS3XSCffwlzQZNPHp7guk4u+5EiUaPwvy
X75iZ6SthUo9GfE6QyhE4rdOceix6S5wsQrKVpGKB7ZuQbXYQxlvNVt/l5p6MGdY
teoqB7CyUADD1yHZp9L85+JSqjbodxm5a/Y9b0wQKHV33dxphEVZeli9t+VZYg6K
fSM5xq0Cmt0msXLGRgB1uvZcEfj+vlkn7SN9nyyfTN2nXoac1E/MYCEiCLMhOj6D
jxwc1aQDwaT+f6U6mRyRab2+TPea7AOv81x0MyRclOArqY4NCOPIG+XvC2nouYXk
9MSyK4FIysbINjenFCZdpdibp3HKWGqc8rTv3NWrx7CejAYQoEkYW5WA9qyzy/I8
8gDbcQskcYcehrI8ztc1ratfKl5k0QJPCgcLvuTpxK3PkQCgX+dGnL1EXW7D4BRx
7Gl6O7gW7JR6kVx7LidJAxUSykoCdtPyiDxfEU8ypERiype2E6EJN/Bn11o1P8zr
VZ/PdGti5gg=
=vLKV
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.16 - take 2
Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.
There is a known merge conflict due to changes in neighbouring lines.
Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/
Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics. Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!
Includes the usual mix of new device support, features and general
cleanup.
This time we also have some tree wide changes.
- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
with. This series includes quite a few related cleanups such as use
of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
iio_device_claim/release_direct() which is structured so that sparse
can warn on failed releases. There were a few false positives but
those were mostly in code that benefited from being cleaned up as part
of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
version over time. This version takes the size of the supplied buffer
which the core checks is at least as big as expected by calculation
from channel descriptions of those channels enabled. Use this in
an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
correctly aligned buffers for timestamps being added onto the end of
channel data.
New device support
------------------
adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
MT8173.
meson-saradc
- Support the GXLX SoCs. Mostly this is a workaround for some unrelated
clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
functionality of the already supported bd79703. Included making this
driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.
Features
--------
Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
things like generated ramps for testing purposes. Enable this for
adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
Get the interrupt by name, but fallback to previous assumption on the first
being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
parts already supported by this driver. Includes some general driver
cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
the supply.
winsen,mhz19b
- New driver for this C02 sensor.
Cleanup and minor fixes
-----------------------
dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
default anyway.
adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
for a messy definition that has to work for all supported parts.
Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.
* tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits)
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
iio: pressure: zpa2326_spi: remove bits_per_word = 8
iio: pressure: ms5611_spi: remove bits_per_word = 8
...
please pull the following for 6.16:
- Krzysztof updates the BCM2711/BCM283X entry to also match on the
bcm2712 pattern to cover the Raspberry Pi 5 files
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmgjUhUACgkQh9CWnEQH
BwQktg/9EKay/eC8F3bQGU6PilDDLcLXBP8OQ9NZcuAZAn/vqP0i2vqMLzXuOjzf
g/4yHWruMzzuZWeWnQgdv/fUnuXWYPBD9nf0a6C23KeFoXCKYUB0k7ySetv/n0Sp
O83GLSlozmm1DOEK8fFHfdSCf3KQ4g/QvIAdD+PKc8v9C/Ic/yfWcerXPsn0n1zC
80p0rbWDdS7ptMhy/WM7oqw9IxNIVc/dZDjVOJ/yOEhx6Jj4CEnhoN8LesM8W024
kKJ2v/xTlwAaYiyKHsLsM0xXWhS4kc0RLc3nmcFPZTQWInJEC5O5GDxkB175yHUq
9DNvfu0d00eN6irzTWaBnvBOZS9sl5IWJd8xH8olmCy8F8NFiegByZgXjL5ORgae
dv3a/mB5Ce5tP17u1dIdVOyQTZ6Qq127CuMDVvOSZgxX/JAHpgSImf/EYOM5D0mM
44bXNQgAAssgimEgisB0h92+RtokiAdVgnNlRlhCxLKbbitv9WVyIjvavkHBslTg
ZenNOWkYzrbQOXvPcz+u6NO4SOjaTPmCYeKauXi3+AS0aKHRmlG6HitbmJFQQg8F
R6m4nXKVLWWyVEWylJ/4jjntoAtMS3KhxuXuTvMXTUUK9DdlxJgYVT/f/1ULmCkg
LvYMCzFbN/eUoYwDaT/Wa+m+syXjxz7EtSWweEs7ANd13ssW6MU=
=W5h3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=UvjF
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.16/maintainers' of https://github.com/Broadcom/stblinux into soc/arm
This pull request contains MAINTAINERS file update for Broadcom SoCs,
please pull the following for 6.16:
- Krzysztof updates the BCM2711/BCM283X entry to also match on the
bcm2712 pattern to cover the Raspberry Pi 5 files
* tag 'arm-soc/for-6.16/maintainers' of https://github.com/Broadcom/stblinux:
ARM: broadcom: MAINTAINERS: Cover bcm2712 files
Link: https://lore.kernel.org/r/20250513140808.2047729-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The TPS61310/TPS61311 is a flash LED driver with I2C interface. Its power
stage is capable of supplying a maximum total current of roughly 1500mA.
The TPS6131x provides three constant-current sinks, capable of sinking up
to 2 x 400mA (LED1 and LED3) and 800mA (LED2) in flash mode. In torch mode
each sink (LED1, LED2, LED3) supports currents up to 175mA.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Link: https://lore.kernel.org/r/20250514-leds-tps6131x-v5-2-a4fb9e7f2c47@emfend.at
Signed-off-by: Lee Jones <lee@kernel.org>
This is [1/3] part of hinic3 Ethernet driver initial submission.
With this patch hinic3 is a valid kernel module but non-functional
driver.
The driver parts contained in this patch:
Module initialization.
PCI driver registration but with empty id_table.
Auxiliary driver registration.
Net device_ops registration but open/stop are empty stubs.
tx/rx logic.
All major data structures of the driver are fully introduced with the
code that uses them but without their initialization code that requires
management interface with the hw.
Co-developed-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Co-developed-by: Gur Stavi <gur.stavi@huawei.com>
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Aeonsemi PHYs and the requirement of a firmware to correctly work.
Also document the max number of LEDs supported and what PHY ID expose
when no firmware is loaded.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45
registers before the firmware is loaded.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the parity bit. The parity bit is a way the IPC use to
follow correct order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7510
before the firmware is loaded.
They all support up to 5 LEDs with various HW mode supported.
While implementing it was found some strange coincidence with using the
same logic for implementing C22 in MMD regs in Broadcom PHYs.
For reference here the AS21xxx PHY name logic:
AS21x1xxB1
^ ^^
| |J: Supports SyncE/PTP
| |P: No SyncE/PTP support
| 1: Supports 2nd Serdes
| 2: Not 2nd Serdes support
0: 10G, 5G, 2.5G
5: 5G, 2.5G
2: 2.5G
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-6-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
-----BEGIN PGP SIGNATURE-----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=lBee
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KRaD
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
-----BEGIN PGP SIGNATURE-----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=5fbP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u6x7
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16, part two
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
* tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Rust abstractions for CPUFreq framework (Viresh Kumar).
- Rust abstractions for OPP framework (Viresh Kumar).
- Basic Rust abstractions for Clk and Cpumask frameworks (Viresh Kumar).
- Minor cleanup to the SCMI cpufreq driver (Mike Tipton).
-----BEGIN PGP SIGNATURE-----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=Zx0u
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM CPUFreq updates for 6.16 from Viresh Kumar:
"- Rust abstractions for CPUFreq framework (Viresh Kumar).
- Rust abstractions for OPP framework (Viresh Kumar).
- Basic Rust abstractions for Clk and Cpumask frameworks (Viresh Kumar).
- Minor cleanup to the SCMI cpufreq driver (Mike Tipton)."
* tag 'cpufreq-arm-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (24 commits)
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
rust: devres: require a bound device
rust: pci: move iomap_region() to impl Device<Bound>
rust: device: implement Bound device context
rust: pci: preserve device context in AsRef
...
I've used several email addresses and a previous name to contribute.
Consolidate all of these to my primary email and update my name.
Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tests for the can subsystem have been in the can-tests repository[1] so
far. Start moving the tests to kernel selftests by importing the current
tst-filter test. The test is now named test_raw_filter and is substantially
updated to be more aligned with the kernel selftests, follow the coding
style, and simplify the validation of received CAN frames. We also include
documentation of the test design. The test verifies that the single filters
on raw CAN sockets work as expected.
We intend to import more tests from can-tests and add additional test cases
in the future. The goal of moving the CAN selftests into the tree is to
align the tests more closely with the kernel, improve testing of CAN in
general, and to simplify running the tests automatically in the various
kernel CI systems.
[1]: https://github.com/linux-can/can-tests
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/87d289f333cba7bbcc9d69173ea1c320e4b5c3b8.1747833283.git.fmaurer@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a selftest for the kselftest harness itself so any changes can be
validated.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-1-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add Nuvoton NCT7201/NCT7202 system voltage monitor 12-bit ADC driver
NCT7201/NCT7202 supports up to 12 analog voltage monitor inputs and up
to 4 SMBus addresses by ADDR pin. Meanwhile, ALERT# hardware event pins
for independent alarm signals, and all the threshold values could be set
for system protection without any timing delay. It also supports reset
input RSTIN# to recover system from a fault condition.
Currently, only single-edge mode conversion and threshold events are
supported.
Signed-off-by: Eason Yang <j2anfernee@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250512083156.3300006-3-j2anfernee@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a binding specification for the Nuvoton NCT7201/NCT7202 up to 12-bit
ADCs with I2C interface.
Signed-off-by: Eason Yang <j2anfernee@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250512083156.3300006-2-j2anfernee@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the DFRobot SEN0322 oxygen sensor.
To instantiate (assuming device is connected to I2C-2):
echo 'sen0322 0x73' > /sys/class/i2c-dev/i2c-2/device/new_device
To get the oxygen concentration (assuming device is iio:device0) multiply
the values read from:
/sys/bus/iio/devices/iio:device0/in_concentration_raw
/sys/bus/iio/devices/iio:device0/in_concentration_scale
Datasheet: https://wiki.dfrobot.com/Gravity_I2C_Oxygen_Sensor_SKU_SEN0322
Signed-off-by: Tóth János <gomba007@gmail.com>
Link: https://patch.msgid.link/20250506-iio-chemical-sen0322-v4-2-1465ac8dc190@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are
low-power, 16-bit, buffered voltage output DACs with software-
programmable gain controls, providing full-scale output spans of 2.5V or
5V for reference voltages of 2.5V. These devices operate from a single
2.7V to 5.5V supply and are guaranteed monotonic by design. The "R"
variants include a 2.5V, 5ppm/°C internal reference, which is disabled
by default.
Support for monitoring internal die temperature, output voltages, and
current of a selected channel via the MUXOUT pin using an external ADC
is currently not implemented.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250429-togreg-v7-3-0af9c543b545@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel)
low-power, 16-bit, buffered voltage output DACs with software-
programmable gain controls. They provide full-scale output spans of 2.5V
or 5V for reference voltages of 2.5V. These devices operate on a single
2.7V to 5.5V supply and are guaranteed to be monotonic by design.
The "R" variants include a 2.5V, 5ppm/°C internal reference, which is
disabled by default.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://patch.msgid.link/20250429-togreg-v7-2-0af9c543b545@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The connected PMU contains several useful nvmem cells such as RTC offset,
boot failure counters, reboot/shutdown selector, and a few others.
In addition M3+ machines have their USB-PD controller connected via SPMI.
Signed-off-by: Jean-Francois Bortolotti <jeff@borto.fr>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Co-developed-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250409-spmi-v4-2-eb81ecfd1f64@gmail.com
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250518032330.2959766-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Over last year, several patches for drivers/mux/ were not picked up,
even after multiple pings or resends, so mark the mux subsystem as odd
fixes to clarify actual status of lack of maintainers with dedicated
time and indicate that someone could help here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501175303.144102-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Peter hands over the maintain role of m10bmc-sec driver to Matthew.
- Qasim's change fix potential NULL pointer for fpga test.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCaCDOLBMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIza47QA/0ktlQtDL6FP1Y+1zR+7ouVYhQrqFdBx
owEuiuOUp7o8AP0a7ah1cQhXavXkO4oYK5wLHzkB2ywyBEVUOuL36AEMCQ==
=vW2j
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.16-rc1
- Peter hands over the maintain role of m10bmc-sec driver to Matthew.
- Qasim's change fix potential NULL pointer for fpga test.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
fpga: m10bmc-sec: change contact for secure update driver
Renesas R-Car V4H (r8a779g0) has PCIe controller, and it requires
specific firmware downloading. So, add a document about the firmware
how to get.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[kwilczynski: commit log, refactor the document content and then add
this new file to a correct index under the top-level PCI documentation]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250507100947.608875-1-yoshihiro.shimoda.uh@renesas.com
Convert the Marvell Armada-3700 UART binding to DT schema. It is a
straight-forward conversion.
Drop the long deprecated single interrupt support.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154408.1595932-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
-----BEGIN PGP SIGNATURE-----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=WChc
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.16-1
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
Changes to ABI and kernel-doc need to be c/c linux-doc. Update
the maintainer's entry to cover those files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <eb9690301ed71a778d6947f458db3c66c0ba5415.1747817887.git.mchehab+huawei@kernel.org>
The recent changes in the gpiolib-acpi.c need also updates in the Documentation
and MAINTAINERS. Do the necessary changes here.
Fixes: babb541af627 ("gpiolib: acpi: Move quirks to a separate file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250516193436.09bdf8cc@canb.auug.org.au
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for memory policy and
migration and add appropriate maintainers and reviewers.
[lorenzo.stoakes@oracle.com: add Ying as reviewer]
Link: https://lkml.kernel.org/r/ed6f0fc2-5608-4eea-b1be-07e3e19be263@lucifer.local
Link: https://lkml.kernel.org/r/20250515191358.205684-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Rakie Kim <rakie.kim@sk.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gregory Price <gourry@gourry.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for Kernel Samepage
Merging (KSM) and add appropriate maintainers and reviewers.
Link: https://lkml.kernel.org/r/20250515190404.203596-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hung-task detector is missing in MAINTAINERS. While it's been quiet
recently, I'm actively working on it and volunteering to review patches.
Adding this section will make it easier for contributors to know who to
contact.
Link: https://lkml.kernel.org/r/20250513052234.46463-1-lance.yang@linux.dev
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In furtherance of ongoing efforts to ensure people are aware of who
de-facto maintains/has an interest in specific parts of mm, as well trying
to avoid get_maintainers.pl listing only Andrew and the mailing list for
mm files - establish a reclaim memory management section and add relevant
maintainers/reviewers.
This is a key part of memory management so sensibly deserves its own
section.
This encompasses both 'classical' reclaim and MGLRU and thus reflects this
in the reviewers from both, as well as those who have contributed
specifically on the memcg side of things.
Link: https://lkml.kernel.org/r/20250512143122.87740-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make Vlastimil maintainer of this section (with thanks to Vlastimil for
agreeing to this!) and add page isolation files for which this section
seem most appropriate.
We may wish to, in future, refactor/rename some of these files to more
logically fit what is actually being performed, but for the time being
this seems the most sensible place.
Additionally, fix the alphabetical ordering of files.
Link: https://lkml.kernel.org/r/20250512144603.90379-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I have been working on the vmalloc code for several years, contributing to
improvements and fixes. Add myself as co-maintainer ("M") alongside
Andrew Morton.
Link: https://lkml.kernel.org/r/20250507150257.61485-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Christop Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I haven't been able to participate and help with this as much as I had
hoped, and it doesn't look like I will be able to spend time on powerpc
going forward.
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420163248.1746379-1-naveen@kernel.org
Maintenance of the ravb driver will be handled by Niklas for now. I
still intend to review patches, and will be using my own email address
going forward.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250519133354.6564-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for internal 2.5Gphy on MT7988. This driver will load
necessary firmware and add appropriate time delay to make sure
that firmware works stably. The firmware loading procedure takes
about 11ms in this driver.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some common KVM test cases are supported on LoongArch now as following:
coalesced_io_test
demand_paging_test
dirty_log_perf_test
dirty_log_test
guest_print_test
hardware_disable_test
kvm_binary_stats_test
kvm_create_max_vcpus
kvm_page_table_test
memslot_modification_stress_test
memslot_perf_test
set_memory_region_test
And other test cases are not supported by LoongArch such as rseq_test,
since it is not supported on LoongArch physical machine either.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
Add a MAINTAINERS entry as part of integration of the EcoNet MIPS platform.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Introduce initial Rust abstractions for the cpufreq core. This includes
basic representations for cpufreq flags, relation types, and the cpufreq
table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Introduce initial Rust abstractions for the Operating Performance Points
(OPP) framework. This includes bindings for `struct dev_pm_opp` and
`struct dev_pm_opp_data`, laying the groundwork for further OPP
integration.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This implements cpu::from_cpu(), which returns a reference to
Device for a CPU. The C struct is created at initialization time for
CPUs and is never freed and so ARef isn't returned from this function.
The new helper will be used by Rust based cpufreq drivers.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.
Co-developed-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Signed-off-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250424184952.1290019-1-pratap.nirujogi@amd.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
To pick up changes for other tools/ libraries used by perf and for
header synchronization with the kernel sources originals.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEmavcbPjUEuTeX8D8C3DlOqA41YcFAmgly3gACgkQC3DlOqA4
1Yce5QgAq0UK170Dk8yrq97PevhAc35OekOvZ2kC7rS/Mp7E7de6puVR0Xawh9rU
xLJC9ldAXCFS8jKzW/9yd6hJqe03KXVULtHD0tdOCoxkp5jfQCx+RWG9BaHljs9T
NWIqKP93Fe83qqWgnSjtG1lTPPNbx++JD61xvnl/eMEh/xU0kVeuhxuqhdyoj1NT
8IzSSFIJBnh4LtgCzGxhNkA8Ar+SShKdFkc+4nL3AoD9DTRx5NiFDfG6OKWTK75h
GA0VB3Ip7Jt8PTFBdxXYcEEe7sYXGtjkiNUHYa+sv4VdU83BTfYgyBi+6PeIADjq
N9BI418qfSkt2VBV1cYHZwe+O89fvw==
=nC7o
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-next-20250515' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
Add initial abstractions for the clk APIs. These provide the minimal
functionality needed for common use cases, making them straightforward
to introduce in the first iteration.
These will be used by Rust based cpufreq / OPP layers to begin with.
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Non-trivial C macros and inlined C functions cannot be used directly
in the Rust code and are used via functions ("helpers") that wrap
those so that they can be called from Rust.
In order to prepare for adding Rust abstractions for the clock APIs,
add clock helpers required by the Rust implementation.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Update the MAINTAINERS file to include the Rust abstractions for cpumask
API.
Yury has indicated that he does not wish to maintain the Rust code but
would like to be listed as a reviewer.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Current driver uses static LMTST region allocated by firmware.
Firmware allocated memory for LMTST is available in PF/VF BAR2.
Using this memory have performance impact as this is mapped as
device memory. There is another option to allocate contiguous
memory at run time and map this in LMT MAP table with the
help of AF driver. With this patch dynamic allocated memory
is used for LMTST.
Also add myself as maintainer for crypto octeontx2 driver
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updates for v6.16
CI:
- uprev mesa
GPU:
- ACD (Adaptive Clock Distribution) support for X1-85. This is required
enable the higher frequencies.
- Drop fictional `address_space_size`. For some older devices, the address
space size is limited to 4GB to avoid potential 64b rollover math problems
in the fw. For these, an `ADRENO_QUIRK_4GB_VA` quirk is added. For
everyone else we get the address space size from the SMMU `ias` (input
address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems
MDSS:
- Added SAR2130P support to MDSS driver
DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes
DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling
DSI:
- Added support for SA8775P
- Added SAR2130P support
MDP4:
- Fixed LCDC / LVDS controller on
HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com
Introduce Rust support for the `xarray` data structure:
- Add a rust abstraction for the `xarray` data structure. This abstraction
allows rust code to leverage the `xarray` to store types that implement
`ForeignOwnable`. This support is a dependency for memory backing feature of
the rust null block driver, which is waiting to be merged.
- Set up an entry in MAINTAINERS for the xarray rust support. Patches will go
to the new rust xarray tree and then via the rust subsystem tree for now.
`kernel` crate:
- Allow `ForeignOwnable` to carry information about the pointed-to type. This
helps asserting alignment requirements for the pointer passed to the foreign
language.
-----BEGIN PGP SIGNATURE-----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=Ig1t
-----END PGP SIGNATURE-----
Merge tag 'rust-xarray-for-v6.16' of https://github.com/Rust-for-Linux/linux into rust-next
Pull XArray updates from Andreas Hindborg:
"Introduce Rust support for the 'xarray' data structure:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a dependency
for memory backing feature of the Rust null block driver, which is
waiting to be merged.
- Set up an entry in MAINTAINERS for the XArray Rust support. Patches
will go to the new Rust XArray tree and then via the Rust subsystem
tree for now.
'kernel' crate:
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the pointer
passed to the foreign language."
* tag 'rust-xarray-for-v6.16' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: add entry for Rust XArray API
rust: xarray: Add an abstraction for XArray
rust: types: add `ForeignOwnable::PointedTo`
- Morph the rust hrtimer subsystem into the rust timekeeping subsystem,
covering delay, sleep, timekeeping, timers. This new subsystem has all the
relevant timekeeping C maintainers listed in the entry.
- Replace `Ktime` with `Delta` and `Instant` types to represent a duration of
time and a point in time.
- Temporarily add `Ktime` to `hrtimer` module to allow `hrtimer` to delay
converting to `Instant` and `Delta`.
-----BEGIN PGP SIGNATURE-----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=M1o/
-----END PGP SIGNATURE-----
Merge tag 'rust-timekeeping-for-v6.16-v2' of https://github.com/Rust-for-Linux/linux into rust-next
Pull timekeeping updates from Andreas Hindborg:
- Morph the Rust hrtimer subsystem into the Rust timekeeping subsystem,
covering delay, sleep, timekeeping, timers. This new subsystem has
all the relevant timekeeping C maintainers listed in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer' to
delay converting to 'Instant' and 'Delta'.
* tag 'rust-timekeeping-for-v6.16-v2' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: rust: Add a new section for all of the time stuff
rust: time: Introduce Instant type
rust: time: Introduce Delta type
rust: time: Add PartialEq/Eq/PartialOrd/Ord trait to Ktime
rust: hrtimer: Add Ktime temporarily
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaCi8agAKCRDdBJ7gKXxA
jm01AQCFDY9R8TeT7ppzJcgkLGtV/UdBJG9aiinORBKOmA1sRQD/URnDRJZqjVGO
Wtp1RkMJG4+u7OeuTvj9LIhuigJ7uQM=
=M3Y/
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cD7r
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
* tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove duplicated word in warning message
x86/CPU/AMD: Add X86_FEATURE_ZEN6
x86/sev: Make sure pages are not skipped during kdump
x86/sev: Do not touch VMSA pages during SNP guest memory kdump
MAINTAINERS: Update Alexey Makhalov's email address
x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
- fix an interrupt storm on system wake-up in gpio-pca953x
- fix an out-of-bounds write in gpio-virtuser
- update MAINTAINERS with an entry for the sloppy logic analyzer
-----BEGIN PGP SIGNATURE-----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=Qbvo
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an interrupt storm on system wake-up in gpio-pca953x
- fix an out-of-bounds write in gpio-virtuser
- update MAINTAINERS with an entry for the sloppy logic analyzer
* tag 'gpio-fixes-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: fix potential out-of-bound write
gpio: pca953x: fix IRQ storm on system wake up
MAINTAINERS: add me as maintainer for the gpio sloppy logic analyzer
This patch updates Zqiang's email address to qiang.zhang@linux.dev.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Acked-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
resctrl has existed for quite a while as a filesystem interface private to
arch/x86. To allow other architectures to support the same user interface
for similar hardware features, it has been moved to /fs/.
Add those with a vested interest in the common code as reviewers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-26-james.morse@arm.com
Resctrl is a filesystem interface to hardware that provides cache
allocation policy and bandwidth control for groups of tasks or CPUs.
To support more than one architecture, resctrl needs to live in /fs/.
Move the code that is concerned with the filesystem interface to
/fs/resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-25-james.morse@arm.com
Add Makefile and Kconfig for fs/resctrl. Add ARCH_HAS_CPU_RESCTRL
for the common parts of the resctrl interface and make X86_CPU_RESCTRL
select this.
Adding an include of asm/resctrl.h to linux/resctrl.h allows the
/fs/resctrl files to switch over to using this header instead.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-16-james.morse@arm.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmghHIMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQP4H/0nzYeRJaWdhar4B
tb3tOUyHpokhqNpWYA+fSxq83H1yTuxv3PoHDJg1OEXfmwmfKS8+UelkBZX+fl/q
gfUz9CdmgMfXyXHw3jQnDGx6IwBDT5z3GfKbmFyzft8vqMyfGSGYmfdSaR+MZrD6
WxxCyNgPWGkT41MgvHW8JAH8Hj+yyzpu7uqx3LIS2KA3dJcxZGJUYC3uA2UBIuGD
CmTuWaG6zY4uTtiAOXUscKyA9wCh7cawTLJKAtc6SEpzAbMmZ3nUiOAVoKf70R0t
EqH16aToV+th/zUvCuPKT3bWIkiNxDsibtwfW9fIJ8aZnQuvO/bK4ygHXjy8C/vc
PUaWMIA=
=evf8
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc6' into next
Sync up with mainline to bring in xpad controller changes.
Sabrina put quite some effort in reviewing the ovpn module
during its official submission to netdev.
For this reason she obtain extensive knowledge of the module
architecture and implementation.
Make her an official reviewer, so that I can be supported
in reviewing and acking new patches.
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Precision Time Management (PTM) mechanism defined in PCIe spec r6.0,
sec 6.21 allows precise coordination of timing information across multiple
components in a PCIe hierarchy with independent local time clocks.
PCI core already supports enabling PTM in the root port and endpoint
devices through PTM Extended Capability registers. But the PTM context
supported by the PTM capable components such as Root Complex (RC) and
Endpoint (EP) controllers were not exposed as of now. Part of the reason is
that the spec doesn't define how the context information is exposed to the
software and left it to the vendor implementation. So there is no
standardized way to get access to the context information and each vendor
have defined their own way.
This commit adds debugfs support to expose the PTM context to userspace
from both PCIe RC and EP controllers. Since the context information is
exposed in a vendor specific way, the debugfs interface allows the
controller drivers to implement callbacks for each attribute, to be called
by the generic PTM driver.
The Controller drivers are expected to call pcie_ptm_create_debugfs() to
create the debugfs attributes for the PTM context and call
pcie_ptm_destroy_debugfs() to destroy them. The drivers should also
populate the relevant callbacks in the 'struct pcie_ptm_ops' structure
based on the controller implementation.
Below PTM context are exposed through debugfs:
PCIe RC
=======
1. PTM Local clock
2. PTM T2 timestamp
3. PTM T3 timestamp
4. PTM Context valid
PCIe EP
=======
1. PTM Local clock
2. PTM T1 timestamp
3. PTM T4 timestamp
4. PTM Master clock
5. PTM Context update
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: fix overflow issue reported by Dan Carpenter from
https://lore.kernel.org/linux-pci/b41c1754-c6b7-4805-9f14-7c643d6c5304@suswa.mountain]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-1-02d26d51400b@linaro.org
These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature
ranges.
- Seven more Rockchip fixes address minor issues with
specific boards
- Invalid clk controller references in multiple amlogic
chips, plus one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx
chips
-----BEGIN PGP SIGNATURE-----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=6PRF
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
Add a new MAINTAINERS section for the ULTRATRONIK BOARD SUPPORT, covering
the stm32mp157c-ultra-fly-sbc.dts board support file.
This ensures that maintainers of this board are properly listed and can be
notified for any relevant changes.
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Signed-off-by: Börge Strümpfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20250508143818.2574558-4-goran.radni@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Convert the Google Goldfish PIC interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144658.1289158-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Amazon FIC interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144548.1286525-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Aspeed SCU interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144613.1287360-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Aspeed I2C interrupt controller binding to schema format.
Drop the "#address-cells" and "#size-cells" as they are unused and
incorrect anyways.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20250505144605.1287121-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Arm Versatile FPGA interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250505144558.1286889-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
While altr,msi-controller is used with PCI, it is not a PCI host bridge
and is just an MSI provider. Move it with other MSI providers in the
'interrupt-controller' directory.
Acked-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154253.1593870-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2dKC
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-nvmem-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and NVMEM due for the v6.16 merge window
Add myself and Javier as maintainer for drm_panic, drm_panic_qr_code
and drm_log.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250507075529.263355-1-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Right now these are performed in kernel/fork.c which is odd and a
violation of separation of concerns, as well as preventing us from
integrating this and related logic into userland VMA testing going
forward.
There is a fly in the ointment - nommu - mmap.c is not compiled if
CONFIG_MMU not set, and neither is vma.c.
To square the circle, let's add a new file - vma_init.c. This will be
compiled for both CONFIG_MMU and nommu builds, and will also form part of
the VMA userland testing.
This allows us to de-duplicate code, while maintaining separation of
concerns and the ability for us to userland test this logic.
Update the VMA userland tests accordingly, additionally adding a
detach_free_vma() helper function to correctly detach VMAs before freeing
them in test code, as this change was triggering the assert for this.
[akpm@linux-foundation.org: remove stray newline, per Liam]
Link: https://lkml.kernel.org/r/f97b3a85a6da0196b28070df331b99e22b263be8.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "move all VMA allocation, freeing and duplication logic to
mm", v3.
Currently VMA allocation, freeing and duplication exist in kernel/fork.c,
which is a violation of separation of concerns, and leaves these functions
exposed to the rest of the kernel when they are in fact internal
implementation details.
Resolve this by moving this logic to mm, and making it internal to vma.c,
vma.h.
This also allows us, in future, to provide userland testing around this
functionality.
We additionally abstract dup_mmap() to mm, being careful to ensure
kernel/fork.c acceses this via the mm internal header so it is not exposed
elsewhere in the kernel.
As part of this change, also abstract initial stack allocation performed
in __bprm_mm_init() out of fs code into mm via the
create_init_stack_vma(), as this code uses vm_area_alloc() and
vm_area_free().
In order to do so sensibly, we introduce a new mm/vma_exec.c file, which
contains the code that is shared by mm and exec. This file is added to
both memory mapping and exec sections in MAINTAINERS so both sets of
maintainers can maintain oversight.
As part of this change, we also move relocate_vma_down() to mm/vma_exec.c
so all shared mm/exec functionality is kept in one place.
We add code shared between nommu and mmu-enabled configurations in order
to share VMA allocation, freeing and duplication code correctly while also
keeping these functions available in userland VMA testing.
This is achieved by adding a mm/vma_init.c file which is also compiled by
the userland tests.
This patch (of 4):
There is functionality that overlaps the exec and memory mapping
subsystems. While it properly belongs in mm, it is important that exec
maintainers maintain oversight of this functionality correctly.
We can establish both goals by adding a new mm/vma_exec.c file which
contains these 'glue' functions, and have fs/exec.c import them.
As a part of this change, to ensure that proper oversight is achieved, add
the file to both the MEMORY MAPPING and EXEC & BINFMT API, ELF sections.
scripts/get_maintainer.pl can correctly handle files in multiple entries
and this neatly handles the cross-over.
[akpm@linux-foundation.org: fix comment typo]
Link: https://lkml.kernel.org/r/80f0d0c6-0b68-47f9-ab78-0ab7f74677fc@lucifer.local
Link: https://lkml.kernel.org/r/cover.1745853549.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/91f2cee8f17d65214a9d83abb7011aa15f1ea690.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We introduced KHO into Linux: A framework that allows Linux to pass
metadata and memory across kexec from Linux to Linux. KHO reuses fdt as
file format and shares a lot of the same properties of firmware-to- Linux
boot formats: It needs a stable, documented ABI that allows for forward
and backward compatibility as well as versioning.
As first user of KHO, we introduced memblock which can now preserve memory
ranges reserved with reserve_mem command line options contents across
kexec, so you can use the post-kexec kernel to read traces from the
pre-kexec kernel.
This patch adds memblock schemas similar to "device" device tree ones to a
new kho bindings directory. This allows us to force contributors to
document the data that moves across KHO kexecs and catch breaking change
during review.
Link: https://lkml.kernel.org/r/20250509074635.3187114-18-changyuanl@google.com
Co-developed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With KHO in place, let's add documentation that describes what it is and
how to use it.
Link: https://lkml.kernel.org/r/20250509074635.3187114-17-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add the infrastructure to generate Kexec HandOver metadata. Kexec
HandOver is a mechanism that allows Linux to preserve state - arbitrary
properties as well as memory locations - across kexec.
It does so using 2 concepts:
1) KHO FDT - Every KHO kexec carries a KHO specific flattened device tree
blob that describes preserved memory regions. Device drivers can
register to KHO to serialize and preserve their states before kexec.
2) Scratch Regions - CMA regions that we allocate in the first kernel.
CMA gives us the guarantee that no handover pages land in those
regions, because handover pages must be at a static physical memory
location. We use these regions as the place to load future kexec
images so that they won't collide with any handover data.
Link: https://lkml.kernel.org/r/20250509074635.3187114-5-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge measurement-register infrastructure for v6.16. Resolve conflicts
with the establishment of drivers/virt/coco/guest/ for cross-vendor
common TSM functionality.
Address a mis-merge with a fixup from Lukas:
Link: http://lore.kernel.org/20250509134031.70559-1-lukas.bulwahn@redhat.com
Restore lib/tests/crc_kunit.c to CRC LIBRARY following the rename in
commit db6fe4d61e ("lib: Move KUnit tests into tests/ subdirectory")
which made it no longer match the file pattern lib/crc*.
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250511052151.420228-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tony Nguyen says:
====================
Prepare for Intel IPU E2000 (GEN3)
This is the first part in introducing RDMA support for idpf.
----------------------------------------------------------------
Tatyana Nikolova says:
To align with review comments, the patch series introducing RDMA
RoCEv2 support for the Intel Infrastructure Processing Unit (IPU)
E2000 line of products is going to be submitted in three parts:
1. Modify ice to use specific and common IIDC definitions and
pass a core device info to irdma.
2. Add RDMA support to idpf and modify idpf to use specific and
common IIDC definitions and pass a core device info to irdma.
3. Add RDMA RoCEv2 support for the E2000 products, referred to as
GEN3 to irdma.
This first part is a 5 patch series based on the original
"iidc/ice/irdma: Update IDC to support multiple consumers" patch
to allow for multiple CORE PCI drivers, using the auxbus.
Patches:
1) Move header file to new name for clarity and replace ice
specific DSCP define with a kernel equivalent one in irdma
2) Unify naming convention
3) Separate header file into common and driver specific info
4) Replace ice specific DSCP define with a kernel equivalent
one in ice
5) Implement core device info struct and update drivers to use it
----------------------------------------------------------------
v1: https://lore.kernel.org/20250505212037.2092288-1-anthony.l.nguyen@intel.com
IWL reviews:
[v5] https://lore.kernel.org/20250416021549.606-1-tatyana.e.nikolova@intel.com
[v4] https://lore.kernel.org/20250225050428.2166-1-tatyana.e.nikolova@intel.com
[v3] https://lore.kernel.org/20250207194931.1569-1-tatyana.e.nikolova@intel.com
[v2] https://lore.kernel.org/20240824031924.421-1-tatyana.e.nikolova@intel.com
[v1] https://lore.kernel.org/20240724233917.704-1-tatyana.e.nikolova@intel.com
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
iidc/ice/irdma: Update IDC to support multiple consumers
ice: Replace ice specific DSCP mapping num with a kernel define
iidc/ice/irdma: Break iidc.h into two headers
iidc/ice/irdma: Rename to iidc_* convention
iidc/ice/irdma: Rename IDC header file
====================
Link: https://patch.msgid.link/20250509200712.2911060-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the initial nova-drm driver skeleton.
nova-drm is connected to nova-core through the auxiliary bus and
implements the DRM parts of the nova driver stack.
For now, it implements the fundamental DRM abstractions, i.e. creates a
DRM device and registers it, exposing a three sample IOCTLs.
DRM_IOCTL_NOVA_GETPARAM
- provides the PCI bar size from the bar that maps the GPUs VRAM
from nova-core
DRM_IOCTL_NOVA_GEM_CREATE
- creates a new dummy DRM GEM object and returns a handle
DRM_IOCTL_NOVA_GEM_INFO
- provides metadata for the DRM GEM object behind a given handle
I implemented a small userspace test suite [1] that utilizes this
interface.
Link: https://gitlab.freedesktop.org/dakr/drm-test [1]
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250424160452.8070-3-dakr@kernel.org
[ Kconfig: depend on DRM=y rather than just DRM. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
- New board support: TQMa8XxS, TQMa95xxSA, TQMa93xx, MBa91xxCA,
i.MX943 EVK, Nitrogen8M Plus ENC Carrier, Toradex SMARC i.MX8MP,
Libra-i.MX 8M Plus FPSC board
- A couple of imx8mp-tqma8mpql-mba8mp-ras314 board updates that support
Raspberry Pi Camera V2 and LVDS using device tree overlay
- A series from Adam Ford that updates i.MX8M Beacon boards for RTC
capacitive load, HDMI audio, Ethernet PHY, etc.
- A set of changes from Daniel Baluta that enables i.MX8MP DSP node
for rproc usage
- A few changes from Francesco Dolcini that add EEPROM compatible
fallback for imx8mp-verdin board, add fan PWM configuation for
imx8mp-toradex-smarc board
- A series from Frank Li to enable PCIe EP support all i.MX8 devices
using device tree overlay
- A change from Laurentiu Mihalcea to enable Sound Open Firmware (SOF)
support on imx95-19x19-evk board
- A few changes from Markus Niebel to disable MDIO Open Drain for
imx93-tqma9352 devices
- A couple of changes from Max Krummenacher to enable PCIe and SATA
support for i.MX8 Apalis and Colibri boards
- A series from Primoz Fiser to enable various devices/functions for
i.MX93 phycore boards
- A patch set from Xu Yang to add USB2.0 support for i.MX95 EVK boards
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmghzEsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7o7gf+K6yNLsEH7fJ/L1faCYfElURJXg+f
X3nfCJwlC7rHAa7yFTb8U2Fu/1Tl4Xm8EtBr8RYIiPq3i+K80jRk/Ns9g/YJPIAT
XrPFVXI9OFWKrYazZVcMvxIDSDS6oB+HjugKb4iJGqktDDvvC+hVc1dzjvyTua39
N0sU3vOUDMPVfmzUFuedfH181M8MLe2gK3dM8t+5c8asVSogP6XElZG+nLF/2djm
/ZuBTUePrMLLnVWTSNzbmYZcFxMoK34Bl87yoin47S1zALL9gfxS/VMXFXiJsQ8Q
c0be/siJQlwSCzmkvrDzuU7Nw5mEboNHM1e7bDEMfdtrZfkA3b7z0bTIVQ==
=8sq6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=A7Fy
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree change for 6.16:
- New board support: TQMa8XxS, TQMa95xxSA, TQMa93xx, MBa91xxCA,
i.MX943 EVK, Nitrogen8M Plus ENC Carrier, Toradex SMARC i.MX8MP,
Libra-i.MX 8M Plus FPSC board
- A couple of imx8mp-tqma8mpql-mba8mp-ras314 board updates that support
Raspberry Pi Camera V2 and LVDS using device tree overlay
- A series from Adam Ford that updates i.MX8M Beacon boards for RTC
capacitive load, HDMI audio, Ethernet PHY, etc.
- A set of changes from Daniel Baluta that enables i.MX8MP DSP node
for rproc usage
- A few changes from Francesco Dolcini that add EEPROM compatible
fallback for imx8mp-verdin board, add fan PWM configuation for
imx8mp-toradex-smarc board
- A series from Frank Li to enable PCIe EP support all i.MX8 devices
using device tree overlay
- A change from Laurentiu Mihalcea to enable Sound Open Firmware (SOF)
support on imx95-19x19-evk board
- A few changes from Markus Niebel to disable MDIO Open Drain for
imx93-tqma9352 devices
- A couple of changes from Max Krummenacher to enable PCIe and SATA
support for i.MX8 Apalis and Colibri boards
- A series from Primoz Fiser to enable various devices/functions for
i.MX93 phycore boards
- A patch set from Xu Yang to add USB2.0 support for i.MX95 EVK boards
* tag 'imx-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
arm64: dts: freescale: Add PHYTEC phyBOARD-Nash-i.MX93 support
arm64: dts: freescale: imx8mp-toradex-smarc: use generic gpio node name
arm64: dts: freescale: imx8mp-toradex-smarc: add gpio expander
arm64: dts: freescale: imx8mp-toradex-smarc: add embedded controller
arm64: dts: freescale: imx8mp-toradex-smarc: add fan PWM configuration
arm64: dts: imx93-tqma9352-mba91xxca: disable Open Drain for MDIO
arm64: dt: imx95: Add TQMa95xxSA
arm64: dts: imx: Align wifi node name with bindings
arm64: dts: freescale: add initial device tree for TQMa8XxS
arm64: dts: imx8mp-tqma8mpql-mba8mp-ras314: Add Raspberry Pi Camera V2 overlay
arm64: dts: imx8mp-tqma8mpql-mba8mp-ras314: Add LVDS device tree overlay
arm64: dts: freescale: Add minimal dts support for imx943 evk
arm64: dts: freescale: Add basic dtsi for imx943
arm64: dts: imx8-colibri: Add PCIe support
arm64: dts: freescale: imx93-phyboard-segin: Order node alphabetically
arm64: dts: freescale: imx93-phyboard-segin: Add EQOS Ethernet
arm64: dts: freescale: imx93-phyboard-segin: Add I2S audio
arm64: dts: freescale: imx93-phyboard-segin: Add USB support
arm64: dts: freescale: imx93-phyboard-segin: Add CAN support
arm64: dts: freescale: imx93-phyboard-segin: Add RTC support
...
Link: https://lore.kernel.org/r/20250512103858.50501-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are updates from Marek Behún for the cznic platform drivers:
This series adds support for generating ECDSA signatures with hardware
stored private key on Turris Omnia and Turris MOX.
This ability is exposed via the keyctl() syscall.
* 'cznic/platform' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: use ffs() instead of __bf_shf()
firmware: turris-mox-rwtm: fix building without CONFIG_KEYS
platform: cznic: fix function parameter names
firmware: turris-mox-rwtm: Add support for ECDSA signatures with HW private key
firmware: turris-mox-rwtm: Drop ECDSA signatures via debugfs
platform: cznic: turris-omnia-mcu: Add support for digital message signing with HW private key
platform: cznic: Add keyctl helpers for Turris platform
platform: cznic: turris-omnia-mcu: Refactor requesting MCU interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We start to have support many Sitronix displays in the tiny directory,
and we expect more to come.
Move them to their own subdirectory.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
There are some fuse-*.rst files in Documentation directory,
let's make get_mantainers.pl work on those file instead of only
fuse.rst.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A vmalloc subsystem includes "lib/test_vmalloc.c" test suite. Add an "F:"
entry under VMALLOC section to track this file as part of the subsystem.
Link: https://lkml.kernel.org/r/20250417161216.88318-3-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christop Hellwig <hch@infradead.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to the recently applied commit that permits this merge,
mprotect()'ing a faulted VMA, adjacent to an unfaulted VMA, such that the
two share characteristics would fail to merge due to what appear to be
unintended consequences of commit 965f55dea0 ("mmap: avoid merging
cloned VMAs").
Now we have fixed this bug, assert that we can indeed merge anonymous VMAs
this way.
Also assert that forked source/target VMAs are equally rejected.
Previously, all empty target anon merges with one VMA faulted and the
other unfaulted would be rejected incorrectly, now we ensure that unforked
merge, but forked do not.
Additionally, add the new test file to the MEMORY MAPPING section in
MAINTAINERS, as these tests are explicitly memory mapping related.
Link: https://lkml.kernel.org/r/2b69330274a3b71721f7042c5eabe91143934415.1744104124.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have introduced Rust bindings for core mm abstractions as part of this
series, so add an entry in MAINTAINERS to be explicit about who maintains
this.
Patches are anticipated to be taken through the mm tree as usual with
other mm code.
Link: https://rust-for-linux.com/rust-kernel-policy#how-is-rust-introduced-in-a-subsystem
Link: https://lore.kernel.org/all/33e64b12-aa07-4e78-933a-b07c37ff1d84@lucifer.local/
Link: https://lkml.kernel.org/r/20250408-vma-v16-9-d8b446e885d9@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for GUP (Get User
Pages) support and add appropriate maintainers and reviewers.
Link: https://lkml.kernel.org/r/20250506173601.97562-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Neil is planning retirement, and has asked me to replace his Suse
email address with his personal email address. Both addresses
currently route to the same mailbox.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaB/D0AAKCRDdBJ7gKXxA
jk1lAPwNV14Sra7MJpVsLGip2BaJLgG+9vQ/Fg3pntEhwX4u0gD/fXEzTog/A73O
xD7jQQStJYxHwu0K8CXIDUniZAXSSQw=
=US5c
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
-----BEGIN PGP SIGNATURE-----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=0qWn
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
Convert the v3,v360epc-pci binding to DT schema format.
Add "clocks" which was not documented and is required. Drop "syscon"
which was documented, but is not used.
Drop the "v3,v360epc-pci" compatible by itself as this device is only
used on the Arm Integrator/AP and not likely going to be used anywhere
else at this point.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250505220139.2202164-1-robh@kernel.org
1. Mediatek: Add support for MT6893 MTK SMI.
2. STM32: Add new driver for STM32 Octo Memory Manager (OMM), which
manages muxing between two OSPI busses.
3. Several cleanups and minor improvements (OMAP GPMC, Kconfig entries,
BT1 L2).
-----BEGIN PGP SIGNATURE-----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=HskW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1zDp
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.16
1. Mediatek: Add support for MT6893 MTK SMI.
2. STM32: Add new driver for STM32 Octo Memory Manager (OMM), which
manages muxing between two OSPI busses.
3. Several cleanups and minor improvements (OMAP GPMC, Kconfig entries,
BT1 L2).
* tag 'memory-controller-drv-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: add entry for STM32 OCTO MEMORY MANAGER driver
memory: Add STM32 Octo Memory Manager driver
dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller
bus: firewall: Fix missing static inline annotations for stubs
memory: bt1-l2-ctl: replace scnprintf() with sysfs_emit()
memory: mtk-smi: Add support for Dimensity 1200 MT6893 SMI
dt-bindings: memory: mtk-smi: Add support for MT6893
memory: tegra: Do not enable by default during compile testing
memory: Simplify 'default' choice in Kconfig
memory: omap-gpmc: remove GPIO set() and direction_output() callbacks
memory: omap-gpmc: use the dedicated define for GPIO direction
Link: https://lore.kernel.org/r/20250508093451.55755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
-----BEGIN PGP SIGNATURE-----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=aV7w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VKvM
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.16
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
* tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: quirk: Force perf level get fastchannel
firmware: arm_scmi: quirk: Fix CLOCK_DESCRIBE_RATES triplet
firmware: arm_scmi: Add common framework to handle firmware quirks
firmware: arm_scmi: Ensure that the message-id supports fastchannel
MAINTAINERS: add entry for i.MX SCMI extensions
firmware: imx: Add i.MX95 SCMI CPU driver
firmware: imx: Add i.MX95 SCMI LMM driver
firmware: arm_scmi: imx: Add i.MX95 CPU Protocol
firmware: arm_scmi: imx: Add i.MX95 LMM protocol
dt-bindings: firmware: Add i.MX95 SCMI LMM and CPU protocol
firmware: arm_scmi: imx: Add LMM and CPU documentation
firmware: arm_scmi: Add polling support to raw mode
firmware: arm_scmi: Exclude transport devices from bus matching
firmware: arm_scmi: Assign correct parent to arm-scmi platform device
firmware: arm_scmi: Refactor error logging from SCMI device creation to single helper
firmware: arm_scmi: Refactor device matching logic to eliminate duplication
firmware: arm_scmi: Ensure scmi_devices are always matched by name as well
Link: https://lore.kernel.org/r/20250507134713.49039-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The email address bounced. I couldn't find a newer one in recent git
history (last activity 9 years ago), so delete this email entry.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250331190731.5094-2-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This driver exposes the non volatile memory using the platform device
registered by the core MFD driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Srinivas Kandagatla <srini@kernel.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-3-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This driver supports the GPIO functions using the platform device
registered by the core MFD driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-2-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This describes its GPIO module.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250325-max77759-mfd-v6-1-c0870ca662ba@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
This adds support for TQMa8XQPS and TQMa8XDPS modules on MB-SMARC-2 board.
As the only difference is the mounted SoC, both module and baseboard
files are shared.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the file 'c3-isp.rst' that documents the c3-isp driver.
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add the file 'metafmt-c3-isp.rst' that documents
the meta format of c3-isp.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The C3 ISP supports multi-camera and multi-exposure HDR, integrates
advanced imaging technologies for optimal quality, and drives the
core pipeline to transform raw sensor data into high-fidelity images
through demosaicing, color correction, and tone mapping operations.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: drop unnecessary vb2_ops_wait_prepare/finish callbacks]
Add a header that describes the 3A statistics buffer and the
parameters buffer for C3 ISP
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
c3-isp is used to process raw image.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a driver for the MIPI adapter unit found on the Amlogic C3 SoC.
This driver is used to align the MIPI data from the MIPI CSI-2 receiver
unit and send the aligned data to the ISP unit.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
c3-mipi-adapter is used to organize mipi data and
send raw data to ISP module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a driver for the CSI-2 receiver unit found on the Amlogic C3 SoC.
Create a drivers/media/platform/amlogic/c3/ directory to host the driver
and the forthcoming support for the Amlogic C3 MIPI adapter and C3 ISP.
This driver is used to receive the MIPI data from image sensor.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix typo: uinit -> unit]
c3-mipi-csi2 is used to receive mipi data from image sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose the most commonly used TDX MRs (Measurement Registers) as sysfs
attributes. Use the ioctl() interface of /dev/tdx_guest to request a full
TDREPORT for access to other TD measurements.
Directory structure of TDX MRs inside a TDVM is as follows:
/sys/class/misc/tdx_guest
└── measurements
├── mrconfigid
├── mrowner
├── mrownerconfig
├── mrtd:sha384
├── rtmr0:sha384
├── rtmr1:sha384
├── rtmr2:sha384
└── rtmr3:sha384
Read the file/attribute to retrieve the current value of an MR. Write to
the file/attribute (if writable) to extend the corresponding RTMR. Refer to
Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest for more
information.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
[djbw: fixup exit order]
Link: https://patch.msgid.link/20250508010606.4129953-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This sample kernel module demonstrates how to make MRs accessible to user
mode through the tsm-mr library.
Once loaded, this module registers a `miscdevice` that host a set of
emulated measurement registers as shown in the directory tree below.
/sys/class/misc/tsm_mr_sample
└── measurements
├── config_mr
├── report_digest:sha512
├── rtmr0:sha256
├── rtmr1:sha384
├── rtmr_crypto_agile:sha256
├── rtmr_crypto_agile:sha384
└── static_mr:sha384
Among the MRs in this example:
- `config_mr` demonstrates a hashless MR, like MRCONFIGID in Intel TDX or
HOSTDATA in AMD SEV.
- `static_mr` demonstrates a static MR. The suffix `:sha384` indicates its
value is a sha384 digest.
- `rtmr0` is an RTMR with `TSM_MR_F_WRITABLE` **cleared**, preventing
direct extensions; as a result, the attribute `rtmr0:sha256` is
read-only.
- `rtmr1` is an RTMR with `TSM_MR_F_WRITABLE` **set**, permitting direct
extensions; thus, the attribute `rtmr1:sha384` is writable.
- `rtmr_crypto_agile` demonstrates a "single" MR that supports multiple
hash algorithms. Each supported algorithm has a corresponding digest,
usually referred to as a "bank" in TCG terminology. In this specific
sample, the 2 banks are aliased to `rtmr0` and `rtmr1`, respectively.
- `report_digest` contains the digest of the internal report structure
living in this sample module's memory. It is to demonstrate the use of
the `TSM_MR_F_LIVE` flag. Its value changes each time an RTMR is
extended.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
Link: https://patch.msgid.link/20250506-tdx-rtmr-v6-2-ac6ff5e9d58a@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Introduce new TSM Measurement helper library (tsm-mr) for TVM guest drivers
to expose MRs (Measurement Registers) as sysfs attributes, with Crypto
Agility support.
Add the following new APIs (see include/linux/tsm-mr.h for details):
- tsm_mr_create_attribute_group(): Take on input a `struct
tsm_measurements` instance, which includes one `struct
tsm_measurement_register` per MR with properties like `TSM_MR_F_READABLE`
and `TSM_MR_F_WRITABLE`, to determine the supported operations and create
the sysfs attributes accordingly. On success, return a `struct
attribute_group` instance that will typically be included by the guest
driver into `miscdevice.groups` before calling misc_register().
- tsm_mr_free_attribute_group(): Free the memory allocated to the attrubute
group returned by tsm_mr_create_attribute_group().
tsm_mr_create_attribute_group() creates one attribute for each MR, with
names following this pattern:
MRNAME[:HASH]
- MRNAME - Placeholder for the MR name, as specified by
`tsm_measurement_register.mr_name`.
- :HASH - Optional suffix indicating the hash algorithm associated with
this MR, as specified by `tsm_measurement_register.mr_hash`.
Support Crypto Agility by allowing multiple definitions of the same MR
(i.e., with the same `mr_name`) with distinct HASH algorithms.
NOTE: Crypto Agility, introduced in TPM 2.0, allows new hash algorithms to
be introduced without breaking compatibility with applications using older
algorithms. CC architectures may face the same challenge in the future,
needing new hashes for security while retaining compatibility with older
hashes, hence the need for Crypto Agility.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
[djbw: fixup bin_attr const conflict]
Link: https://patch.msgid.link/20250509020739.882913-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Adds a driver for the ITE Embedded Controller (EC) on Portwell boards.
It integrates with the Linux GPIO and watchdog subsystems to provide:
- Control/monitoring of up to 8 EC GPIO pins.
- Hardware watchdog timer with 1-255 second timeouts.
The driver communicates with the EC via I/O port 0xe300 and identifies
the hardware by the "PWG" firmware signature. This enables enhanced
system management for Portwell embedded/industrial platforms.
Signed-off-by: Yen-Chi Huang <jesse.huang@portwell.com.tw>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/a04be962-b207-4085-af5b-523f59bffcbc@portwell.com.tw
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the common.h header file to include/linux/platform_data/x86/int3472.h
and add a "INTEL_INT3472" kernel-symbol-namespace to the exported symbols.
This is a preparation patch for exporting some more symbols for re-use in
the atomisp driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
commit ba47652ba6 ("media: meye: remove this deprecated driver")
removed the meye driver but left behind the code in sony-laptop.c
which that driver used to call.
Remove the sony_pic_camera_command() function, and the set of
defines (SONY_PIC_COMMAND_*) in a header used for the interface
and the static helpers it called.
Cleanup remaining #defines.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250505152558.40526-1-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key
controllable RGB keyboard backlight. The firmware API for it is implemented
via WMI.
To make the backlight userspace configurable this driver emulates a
LampArray HID device and translates the input from hidraw to the
corresponding WMI calls. This is a new approach as the leds subsystem lacks
a suitable UAPI for per-key keyboard backlights, and like this no new UAPI
needs to be established.
The handle_* functions an corresponding structs are named based on the HID
spec: HID Usage Tables 1.6 -> 26 Lighting And Illumination Page (0x59)
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250425210043.342288-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce a driver for devices running Dasharo firmware. The driver
supports thermal monitoring using a new ACPI interface in Dasharo. The
initial version supports monitoring fan speeds, fan PWM duty cycles and
system temperatures as well as determining which specific interfaces are
implemented by firmware.
It has been tested on a NovaCustom laptop running pre-release Dasharo
firmware, which implements fan and thermal monitoring for the CPU and
the discrete GPU, if present.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Link: https://lore.kernel.org/all/20250507075214.36729-1-lukas.bulwahn@redhat.com
Link: https://lore.kernel.org/r/20250425112147.69308-2-michal.kopec@3mdeb.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for Transparent Huge
Page support and add appropriate maintainers and reviewers.
[lorenzo.stoakes@oracle.com: add Dev Jain as THP reviewer]
Link: https://lkml.kernel.org/r/327e6f2f-0f0f-48af-9ca2-3f8cadf0d8bf@lucifer.local
Link: https://lkml.kernel.org/r/20250424111632.103637-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In furtherance of ongoing efforts to ensure people are aware of who
de-facto maintains/has an interest in specific parts of mm, as well trying
to avoid get_maintainers.pl listing only Andrew and the mailing list for
mm files - establish a 'core' memory management section establishing David
as co-maintainer alongside Andrew (thanks David for volunteering!) along
with a number of relevant reviewers.
We try to keep things as fine-grained as possible, so we place only
obviously 'general' mm things here. For files which are specific to a
particular part of mm, we prefer new entries.
Link: https://lkml.kernel.org/r/20250423123042.59082-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Separate out the reverse mapping part of memory management and assign
appropriate maintainers and reviewers.
David has long been invovled in work with the reverse mapping and
continues to do so, so is well suited to maintain this area of the kernel.
I have a lot of experience working with the anonymous reverse mapping and
continue to work in this area, and also have good knowledge of the walking
code and code related to VMAs.
This helps people identify who to ask for help, and also additionally makes
life easier in review.
Link: https://lkml.kernel.org/r/20250418150052.299220-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Add a new reviewer, Hongbo Li, for better community development;
- Fix an I/O hang out of file-backed mounts;
- Address a rare data corruption caused by concurrent I/Os on the
same deduplicated compressed data;
- Minor cleanup.
-----BEGIN PGP SIGNATURE-----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=b+bQ
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer, Hongbo Li, for better community development
- Fix an I/O hang out of file-backed mounts
- Address a rare data corruption caused by concurrent I/Os on the same
deduplicated compressed data
- Minor cleanup
* tag 'erofs-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure the extra temporary copy is valid for shortened bvecs
erofs: remove unused enum type
fs/erofs/fileio: call erofs_onlinefolio_split() after bio_add_folio()
MAINTAINERS: erofs: add myself as reviewer
To pick up fixes from the latest perf-tools pull request from Namhyung
and get perf-tools-next in line with thinngs in other areas it uses,
like tools/lib/bpf, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge series from Haibo Chen <haibo.chen@nxp.com>:
PATCH1/3/4 to clean up the code, make the code more readable
PATCH2 add the runtime pm support
PATCH5 use devm_add_action_or_reset() to replace remove() callback, this can avoid
oops when do bind/unbind test
The clock binding for Maxim MAX77686/MAX77802/MAX77620 is already
covered by mfd/maxim,max77686.yaml.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250505161943.1433081-1-robh@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert binding doc imx.txt to yaml format. Create two yaml files:
fsl,imx6-mipi-csi2.yaml and fsl,imx-capture-subsystem.yaml.
Additional changes:
- add example for fsl,imx6-mipi-csi2
- add irq err1 and err2 description
- update MAINTAINERS
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: drop empty line at the end of the yaml files]
Commit 59b24c0047 ("media: dt-bindings: media: i2c: align filenames
format with standard") renames the files in
Documentation/devicetree/bindings/media/i2c/, but misses to adjust the file
entry in OMNIVISION OV7670 SENSOR DRIVER.
Adjust the file entry after this renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
I recently left WolfVision but would like to continue to maintain the
Sony IMX415 image sensor driver. Update my e-mail address.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In commit 5b0e91fd47 ("media: imx335: Orphan the driver"), the IMX335
driver was marked as an orphan.
I have several of these sensors, tested on Raspberry Pi and NXP systems,
and the full datasheet. Add myself as a maintainer for the IMX335.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VD55G1 is a monochrome global shutter camera with a 804x704 maximum
resolution with RAW8 and RAW10 bytes per pixel.
The driver supports :
- Auto exposure from the sensor, or manual exposure mode
- HDR subtraction mode, allowing edge detection and background removal
- Auto exposure cold start, using configuration values from last stream
to start the next one
- LED GPIOs for illumination
- Most standard camera sensor features (hblank, vblank, test patterns,
again, dgain, hflip, vflip, auto exposure bias, etc.)
Add driver source code to MAINTAINERS file.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Also update MAINTAINERS file accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add V4L2 sub-device driver for STMicroelectronics VD56G3 camera sensor.
This is a 1.5 M pixel global shutter image sensor with an active array
size of 1124 x 1364 (portrait orientation).
The driver supports Mono (VD56G3) and Color (VD66GY) variants.
Signed-off-by: Sylvain Petinot <sylvain.petinot@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add devicetree bindings Documentation for ST VD56G3 & ST VD66GY camera
sensors. Update MAINTAINERS file.
Signed-off-by: Sylvain Petinot <sylvain.petinot@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a new driver for the Omnivision OV02C10 camera sensor. This is based
on the out of tree driver by Hao Yao <hao.yao@intel.com> from:
https://github.com/intel/ipu6-drivers/blob/master/drivers/media/i2c/ov02c10.c
This has been tested on a Dell XPS 9440 together with the IPU6 isys CSI
driver and the libcamera software ISP code.
Tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> # Dell XPS 9340
Tested-by: Heimir Thor Sverrisson <heimir.sverrisson@gmail.com> # Dell XPS 9440
Signed-off-by: Heimir Thor Sverrisson <heimir.sverrisson@gmail.com>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> # Dell XPS 9340
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The main changes are once more for the NXP i.MX platform, addressing
multiple regressions in recent devicetree updates for the i.MX8MM
and i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update
to disambiguate NXP i.MX SoCs from Sony IMX image sensors.
The stm32 platform devicetree files get some compatibility fixes
for the interrupt controller node.
Another compatibility fix is done for the Arm Morello platform's
cache controller node.
The code changes are all for firmware drivers, fixing kernel-side
bugs on the Arm FF-A and SCMI drivers.
-----BEGIN PGP SIGNATURE-----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=1WdR
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are once more for the NXP i.MX platform, addressing
multiple regressions in recent devicetree updates for the i.MX8MM and
i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update to
disambiguate NXP i.MX SoCs from Sony IMX image sensors.
The stm32 platform devicetree files get some compatibility fixes for
the interrupt controller node.
Another compatibility fix is done for the Arm Morello platform's cache
controller node.
The code changes are all for firmware drivers, fixing kernel-side bugs
on the Arm FF-A and SCMI drivers"
* tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp23 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp23 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp21 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp21 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
arm64: dts: morello: Fix-up cache nodes
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
firmware: arm_scmi: Fix timeout checks on polling path
firmware: arm_scmi: Balance device refcount when destroying devices
Add a new MAINTAINERS entry for the Renesas RZ/V2H(P) USB2PHY Port Reset
driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250415195131.281060-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Triggered by noticing that the pwm-rcar driver isn't covered by the
Renesas maintainer entry, add this driver to it. Instead of adding it
explicitly, just add a file regex for "rcar" (and drop the one entry
that gets redundant by that).
Looking at the output of
$ git ls-files | grep rcar
only shows files related to that architecture, so no X: line is
currently needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250404080045.367845-2-u.kleine-koenig@baylibre.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046d
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
Add a new schema which extends opp-v2 to support a new vendor specific
property required for Adreno GPUs found in Qualcomm's SoCs. The new
property called "qcom,opp-acd-level" carries a u32 value recommended
for each opp needs to be shared to GMU during runtime.
Also, update MAINTAINERS file include the new opp-v2-qcom-adreno.yaml.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649351/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In preparation for creating a new drivers/virt/coco/host/ directory to
house shared host driver infrastructure for confidential computing, move
configfs-tsm to a guest/ sub-directory. The tsm.ko module is renamed to
tsm_reports.ko. The old tsm.ko module was only ever demand loaded by
kernel internal dependencies, so it should not affect existing userspace
module install scripts.
The new drivers/virt/coco/guest/ is also a preparatory landing spot for
new / optional TSM Report mechanics like a TCB stability enumeration /
watchdog mechanism. To be added later.
Cc: Wu Hao <hao.wu@intel.com>
Cc: Yilun Xu <yilun.xu@intel.com>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/174107246641.1288555.208426916259466774.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for new + common TSM (TEE Security Manager)
infrastructure, namespace the TSM report symbols in tsm.h with an
_REPORT suffix to differentiate them from other incoming tsm work.
Cc: Yilun Xu <yilun.xu@intel.com>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/174107246021.1288555.7203769833791489618.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Before extending the driver with functions from the R-Car ISP core that
will span multiple files move the existing driver to a separate
directory. While at it rename the single source file to allow future
files to be grouped by functions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250423163113.2961049-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Updates to PSCI Devicetree binding seems to be not picked up from the
mailing list, probably because actual maintainers are not CC-ed. Add
the binding to the PCSI maintainers entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501150934.77317-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Introduce the zoned_loop.rst documentation file under
admin-guide/blockdev to document the zoned loop block device driver.
An overview of the driver is provided and its usage to create and delete
zoned devices described.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250407075222.170336-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The zoned loop block device driver allows a user to create emulated
zoned block devices using one regular file per zone as backing storage.
Compared to null_blk or scsi_debug, it has the advantage of allowing
emulating large zoned devices without requiring the same amount of
memory as the capacity of the emulated device. Furthermore, zoned
devices emulated with this driver can be re-started after a host reboot
without any loss of the state of the device zones, which is something
that null_blk and scsi_debug do not support.
This initial implementation is simple and does not support zone resource
limits. That is, a zoned loop block device limits for the maximum number
of open zones and maximum number of active zones is always 0.
This driver can be either compiled in-kernel or as a module, named
"zloop". Compilation of this driver depends on the block layer support
for zoned block device (CONFIG_BLK_DEV_ZONED must be set).
Using the zloop driver to create and delete zoned block devices is
done by writing commands to the zoned loop control character device file
(/dev/zloop-control). Creating a device is done with:
$ echo "add [options]" > /dev/zloop-control
The options available for the "add" operation cat be listed by reading
the zloop-control device file:
$ cat /dev/zloop-control
add id=%d,capacity_mb=%u,zone_size_mb=%u,zone_capacity_mb=%u,conv_zones=%u,base_dir=%s,nr_queues=%u,queue_depth=%u
remove id=%d
The options available allow controlling the zoned device total
capacity, zone size, zone capactity of sequential zones, total number
of conventional zones, base directory for the zones backing file, number
of I/O queues and the maximum queue depth of I/O queues.
Deleting a device is done using the "remove" command:
$ echo "remove id=0" > /dev/zloop-control
This implementation passes various tests using zonefs and fio (t/zbd
tests) and provides a state machine for zone conditions that is
compliant with the T10 ZBC and NVMe ZNS specifications.
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250407075222.170336-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SD-FEC entry claims ownership of the generic
drivers/misc/Kconfig and
drivers/misc/Makefile
in reality that driver is just one of many using those files.
Remove those file entries.
Fixes: e00feed03f ("MAINTAINERS: add maintainer for SD-FEC")
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250427233016.124044-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an entry for the Rust xarray abstractions.
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250423-rust-xarray-bindings-v19-3-83cdcf11c114@gmail.com
[ Changed T: entry branch to `xarray-rust` - Andreas ]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:
This patchset adds some checks on kernel minimum rate requirements.
This avoids potential clock rate misconfiguration, when setting the
kernel frequency on STM32MP2 SoCs.
On the Huawei Matebook E Go tablet the EC provides access to the adapter
and battery status. Add the driver to read power supply status on the
tablet.
This driver is inspired by the following drivers:
drivers/power/supply/lenovo_yoga_c630_battery.c
drivers/platform/arm64/acer-aspire1-ec.c
drivers/acpi/battery.c
drivers/acpi/ac.c
base-commit: 613af589b566093ce7388bf3202fca70d742c166
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250313103437.108772-1-mitltlatltl@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
To prepare for the IDC upgrade to support different CORE
PCI drivers, rename header file from iidc.h to iidc_rdma.h
since this files functionality is specifically for RDMA support.
Use net/dscp.h include in irdma osdep.h and DSCP_MAX type.h,
instead of iidc header and define.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Merge series from David Lechner <dlechner@baylibre.com>:
In order to achieve a 4 MSPS rate on a 16-bit ADC with a 80 MHz SCLK
using the SPI offload feature of the AXI SPI Engine, we need to shave
off some time that is spent executing unnecessary instructions. There
are a few one-time setup instructions that can be moved so that they
execute only once when the SPI offload trigger is enabled rather than
repeating each time the offload is triggered. Additionally, a recent
change to the IP block allows dropping the SYNC instruction completely.
With these changes, we are left with only the 3 instructions that are
needed to to assert CS, transfer the data, and deassert CS. This makes
3 + 16 * 12.5 ns = 237.5 ns < 250 ns which is comfortably within the
available time period.
The EC of OneXPlayer devices used to only control the fan. This is no
longer the case, with the EC of OneXPlayer gaining additional
functionality (turbo button, turbo led, battery controls).
As it will be beneficial from a complexity perspective to retain this
driver as a single unit, move it out of hwmon, and into platform/x86.
Also, remove the hwmon documentation to prepare moving it to
Documentation/ABI/.
While at it, add myself to the maintainer's file.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
- An i.MX8MP change from Ahmad Fatoum to fix the broken nominal device
tree caused by commit 9f7595b3e5 ("arm64: dts: imx8mp: configure
GPU and NPU clocks to overdrive rate")
- A MAINTAINERS update from Michael Riesch to exclude Sony IMX image
sensor drivers from i.MX entry
- A i.MX95 device tree change from Richard Zhu to correct the range of
PCIe app-reg region
- An opos6ul device tree change from Sébastien Szymanski to fix
an Ethernet regression caused by commit c7e73b5051 ("ARM: imx:
mach-imx6ul: remove 14x14 EVK specific PHY fixup")
- An imx8mm-verdin device tree change from Wojciech Dubowik to fix
a SD card regression caused by commit f5aab0438e ("regulator:
pca9450: Fix enable register for LDO5")
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmgPPxkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM50Twf9Eyj8zsNr7RPTPxJmo/tfWPHKGyRF
9l3oKgCYtdO8E0zck/aR/XgYkRY3Y3JdP7Mh4SKmw7mCb6+PHL9UnN72bxPKUuIj
FrvguIjuf8d9iYdQvfncGUv0IZE95M0BBcP9TjKELf4l4N7floZAc32YVItzCQx1
ZKGLnSAD133YR4j1CbAenxBogoiczN628iuklYqTzJm2B7sJBvwrXSa5BKZruFdC
jjtpKamPPb6I1aMqTkgz2Ofbk4KuauAcK1ixgvIAelJXrXngmPcIf+L2rOU0gCZv
XsyVUT2FwFIeHo9aQmQxxZr5v+xFmrRrbTxXZqvmcWMrUWruHm82A2wN9Q==
=YGnN
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.15:
- An i.MX8MP change from Ahmad Fatoum to fix the broken nominal device
tree caused by commit 9f7595b3e5 ("arm64: dts: imx8mp: configure
GPU and NPU clocks to overdrive rate")
- A MAINTAINERS update from Michael Riesch to exclude Sony IMX image
sensor drivers from i.MX entry
- A i.MX95 device tree change from Richard Zhu to correct the range of
PCIe app-reg region
- An opos6ul device tree change from Sébastien Szymanski to fix
an Ethernet regression caused by commit c7e73b5051 ("ARM: imx:
mach-imx6ul: remove 14x14 EVK specific PHY fixup")
- An imx8mm-verdin device tree change from Wojciech Dubowik to fix
a SD card regression caused by commit f5aab0438e ("regulator:
pca9450: Fix enable register for LDO5")
* tag 'imx-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
Add a new section for all of the time stuff to MAINTAINERS file, with
the existing hrtimer entry fold.
Acked-by: John Stultz <jstultz@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250423192857.199712-7-fujita.tomonori@gmail.com
[ Changed T: entry branch to `timekeeping-next` - Andreas ]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Toradex SMARC iMX8MP and SMARC iMX95 SoM modules use a small Embedded
Controller (EC) to manage power and reset functions and related SMARC
signals.
This driver implements power-off and reboot handlers, communicating with
the EC via I2C to issue the appropriate power management commands.
During probe, the driver logs the Embedded Controller ID (unique ID for
each SMARC board supported) in hex format along with the firmware version.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250414171455.155155-3-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The Toradex Embedded Controller provides system power-off and restart
functionalities.
The two variants, SMARC iMX95 and SMARC iMX8P, have a compatible
I2C interface.
Besides this, different compatible values are defined to allow for
future implementation differences.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250414171455.155155-2-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the arm BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/arm/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I have a solid background in file systems and since much of my
recent work has focused on EROFS, I am familiar with it. Now I
have the time and am willing to help review EROFS patches.
I hope my participation can be helpful to the EROFS patch review
process.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Acked-by: Chao Yu <chao@kernel.org>
Acked-by: Gao Xiang <xiang@kernel.org>
Link: https://lore.kernel.org/r/20250424030653.3308358-1-lihongbo22@huawei.com
Signed-off-by: Gao Xiang <xiang@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into usb-next
We need the USB fixes in here as well, and this resolves the following
merge conflicts that were reported in linux-next:
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/host/xhci.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete the hda_cs_dsp module and move the one array and one function
that is used by the cs35l41_hda driver into that driver.
The cs35l41 and cs35l56 drivers stopped creating ALSA controls to
wrap firmware controls. The reasons are explained in:
commit 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls
for firmware coefficients")
and
commit 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls
for firmware coefficients")
The cs35l56_hda driver now doesn't use hda_cs_dsp_ctl at all. The
cs35l41_hda driver only uses the small array of firmware names and the
function to read a control value. All other functions and data in
hda_cs_dsp_ctl are unused. There is no need to keep a separate module
for such a small amount of data and code that is only used by one driver,
so remove the whole module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250424181214.66759-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=5H9J
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaAvyTwAKCRCRxhvAZXjc
okgIAQDlcp1CoIBOxNaqg9PzuWjg4uaNeiKqDVliy83bu8zGhAEAmwLSVEVJGvJl
ACFkKgc7+qaa3p67UmXf2HVrIg79+ww=
=o5Iw
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- For some reason we went from zero to three maintainers for HFS/HFS+
in a matter of days. The lesson to learn from this might just be that
we need to threaten code removal more often!?
- Fix a regression introduced by enabling large folios for lage logical
block sizes. This has caused issues for noref migration with large
folios due to sleeping while in an atomic context.
New sleeping variants of pagecache lookup helpers are introduced.
These helpers take the folio lock instead of the mapping's private
spinlock. The problematic users are converted to the sleeping
variants and serialize against noref migration. Atomic users will
bail on seeing the new BH_Migrate flag.
This also shrinks the critical region of the mapping's private lock
and the new blocking callers reduce contention on the spinlock for
bdev mappings.
- Fix two bugs in do_move_mount() when with MOVE_MOUNT_BENEATH. The
first bug is using a mountpoint that is located on a mount we're not
holding a reference to. The second bug is putting the mountpoint
after we've called namespace_unlock() as it's no longer guaranteed
that it does stay a mountpoint.
- Remove a pointless call to vfs_getattr_nosec() in the devtmpfs code
just to query i_mode instead of simply querying the inode directly.
This also avoids lifetime issues for the dm code by an earlier bugfix
this cycle that moved bdev_statx() handling into vfs_getattr_nosec().
- Fix AT_FDCWD handling with getname_maybe_null() in the xattr code.
- Fix a performance regression for files when multiple callers issue a
close when it's not the last reference.
- Remove a duplicate noinline annotation from pipe_clear_nowait().
* tag 'vfs-6.15-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/xattr: Fix handling of AT_FDCWD in setxattrat(2) and getxattrat(2)
MAINTAINERS: hfs/hfsplus: add myself as maintainer
splice: remove duplicate noinline from pipe_clear_nowait
devtmpfs: don't use vfs_getattr_nosec to query i_mode
fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount()
fs: fall back to file_ref_put() for non-last reference
mm/migrate: fix sleep in atomic for large folios and buffer heads
fs/ext4: use sleeping version of sb_find_get_block()
fs/jbd2: use sleeping version of __find_get_block()
fs/ocfs2: use sleeping version of __find_get_block()
fs/buffer: use sleeping version of __find_get_block()
fs/buffer: introduce sleeping flavors for pagecache lookups
MAINTAINERS: add HFS/HFS+ maintainers
fs/buffer: split locking for pagecache lookups
Here are some small USB driver fixes and new device ids for 6.15-rc4.
Nothing major in here, just the normal set of issues that have cropped
up after -rc1:
- new device ids for usb-serial drivers
- new device quirks added
- typec driver fixes
- chipidea driver fixes
- xhci driver fixes
- wdm driver fixes
- cdns3 driver fixes
- MAINTAINERS file update
All of these, except for the MAINTAINERS file update, have been in
linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaAtzuQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynJ+gCgnnXV+nmrAvFffI5LQWlui2xOT8AAoKGt8e8v
+FBjTEXoyXzzsbQCYBNS
=P5vR
-----END PGP SIGNATURE-----
Merge tag 'usb-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.15-rc4.
Nothing major in here, just the normal set of issues that have cropped
up after -rc1:
- new device ids for usb-serial drivers
- new device quirks added
- typec driver fixes
- chipidea driver fixes
- xhci driver fixes
- wdm driver fixes
- cdns3 driver fixes
- MAINTAINERS file update
All of these, except for the MAINTAINERS file update, have been in
linux-next for a while with no reported issues"
* tag 'usb-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
MAINTAINERS: Assign maintainer for the port controller drivers
USB: serial: simple: add OWON HDS200 series oscilloscope support
USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe
USB: serial: option: add Sierra Wireless EM9291
usb: typec: class: Unlocked on error in typec_register_partner()
usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive
USB: wdm: add annotation
USB: wdm: wdm_wwan_port_tx_complete mutex in atomic context
USB: wdm: close race between wdm_open and wdm_wwan_port_stop
USB: wdm: handle IO errors in wdm_wwan_port_start
USB: VLI disk crashes if LPM is used
usb: dwc3: gadget: check that event count does not exceed event buffer length
USB: storage: quirk for ADATA Portable HDD CH94
usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive
USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02)
usb: dwc3: xilinx: Prevent spike in reset signal
usb: cdns3: Fix deadlock when using NCM gadget
usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handling
usb: chipidea: ci_hdrc_imx: fix call balance of regulator routines
usb: chipidea: ci_hdrc_imx: fix usbmisc handling
...
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
Per Mark's comments in [1], each driver in one patchset and not merge
the changes to one driver in one patch, so worked out three patches.
- Sort the included headers.
- Drop sound/tpa6130a2-plat.h because no user is creating the device using
platform data
- Covert to GPIO descriptors
Checking the DTS polarity, all users are using GPIOD_ACTIVE_HIGH.
so all should work as expected with this patch.
I not have hardware to test, just my best effort to do this.
[1] https://lore.kernel.org/all/66db9962-d773-4c7a-bf59-4698eca9eedc@sirena.org.uk/
Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaAuR4g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynU0wCg2YmcO0R7M4+g5SPHEFN0jy2xcaAAn1rMLbAY
E4U8Wo13hNMRtzMeI814
=YKYd
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
drivers/base/memory: Avoid overhead from for_each_present_section_nr()
software node: Prevent link creation failure from causing kobj reference count imbalance
device property: Add a note to the fwnode.h
drivers/base: Add myself as auxiliary bus reviewer
drivers/base: Extend documentation with preferred way to use auxbus
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
MAINTAINERS: update the location of the driver-core git tree
rust: firmware: Use `ffi::c_char` type in `FwFunc`
MAINTAINERS: pci: add entry for Rust PCI code
The all hisilicon PMU JSON events were missing to be listed there.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250418070812.3771441-4-hejunhao3@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Especially the port manager (tcpm.c) is so major driver that
it should have somebody watching over it who really
understands it, and the port controller interface in
general. Assigning Badhri as the designated reviewer and
restoring the status to Maintained from Orphan.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250407133306.387576-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I used to maintain Allwinner SoC cpufreq and thermal drivers and
have some work experience in the F2FS file system.
I volunteered to maintain the code together with Slava and Adrian.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/20250423123423.2062619-1-frank.li@vivo.com
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert the Analog Devices ad5820 to DT schema format.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add in the ov02e10 driver from the Intel IPU6 repository.
Signed-off-by: Jingjing Xiong <jingjing.xiong@intel.com>
Co-developed-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hao Yao <hao.yao@intel.com>
Co-developed-by: Jim Lai <jim.lai@intel.com>
Signed-off-by: Jim Lai <jim.lai@intel.com>
Co-developed-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Append missing vendor and align with other sony definitions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Change the maintainer for the Intel MAX10 BMC Secure Update driver from
Peter Colberg to Matthew Gerlach and update the ABI documentation.
Signed-off-by: Peter Colberg <peter.colberg@altera.com>
Acked-by: Matthew Gerlach <matthew.gerlach@altera.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250317210136.72816-1-peter.colberg@altera.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Since the IMX (as in i.MX, the NXP SoCs) MAINTAINERS entry claims
everything that contains the name "imx", hanges to device tree
bindings for any Sony IMX image sensor are likely to be sent to the
maintainers listed therein. Add the missing exclude to fix that.
Fixes: da8b7f0fb0 ("MAINTAINERS: add all files matching "imx" and "mxs" to the IMX entry")
Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite the textual description for the WonderMedia PWM controller
as YAML schema, and switch the filename to follow the compatible
string.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418-via_pwm_binding-v2-1-17545f4d719e@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Change the references to Cirrus Logic files under include/sound to be a
wildcard of all cs* and use X: to exclude the three cs* files that are not
related to ASoC.
This means that new Cirrus Logic files added to include/sound will be
picked up automatically as an ASoC file without any changes to MAINTAINERS.
New files are most likely to be for ASoC drivers now.
It's also easier to manage than ranges of wildcarding for different sets of
files.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250423192714.22158-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite the textual description for the VIA/WonderMedia interrupt
controller as YAML schema.
The original textual version did not contain information about the
usage of 'interrupts' to describe the connection of a chained
controller to its parent, add it here. A chained controller can
trigger up to 8 different interrupts (IRQ0~7) on its parent.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250418-via_intc_binding-v2-1-b649ce737f71@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Maxim MAX77705 is a Companion Power Management and Type-C interface IC.
It includes charger and fuel gauge blocks, and is capable of measuring
charger input current, system bus volatage and current, and bypass
voltage.
Add support for mentioned measurements.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250423-initial-support-for-max77705-sensors-v6-1-ff379e1b06c5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add hardware monitoring and regulator support for LT3074. The LT3074 is an
ultrafast, ultralow noise 3A, 5.5V dropout linear regulator. The PMBus
serial interface allows telemetry for input/output voltage, bias voltage,
output current, and die temperature.
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Link: https://lore.kernel.org/r/20250421-upstream-lt3074-v3-2-71636322f9fe@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge series from João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>:
I'm working on integrating a system with a MAX20086 and noticed these
small issues in the driver: the chip ID for MAX20086 is 0x30 and not
0x40. Also, in my use case, the enable pin is always enabled by
hardware, so the enable GPIO isn't needed. Without these changes, the
driver fails to probe.
Convert the marvell,armada8k-pcie binding to DT schema. The binding
uses different names for reg, clocks, and phys which have to be added
to the common Synopsys DWC binding.
The "marvell,reset-gpio" property was not documented. Mark it deprecated
as the "reset-gpios" property can be used instead. The "msi-parent"
property was also not documented.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250414214135.1680076-1-robh@kernel.org
Add documentation for ad3552r driver, needed to describe the high-speed
driver debugfs attributes and shows how the user may use them.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250409-wip-bl-ad3552r-fixes-v5-2-fb429c3a6515@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lars-Peter has not been active in IIO reviewing for some time. Without
David, Nuno and Andy, along with many others who review IIO patches, I
would not be able to keep up with the rate of change and would have
become a bottleneck to development.
Hence update the MAINTAINERS entry to more accurately reflect reality.
This is not intended to give the 3 of them any more work or to oblige
them to review any particular series, so if there are any series waiting
a long time continue to poke me via the list.
Acked-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250406153120.2129133-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Both the hfs and hfsplus filesystem have been orphaned since at least
2014, i.e., over 10 years. However, HFS/HFS+ driver needs to stay
for Debian Ports as otherwise we won't be able to boot PowerMacs
using GRUB because GRUB won't be usable anymore on PowerMacs with
HFS/HFS+ being removed from the kernel.
This patch proposes to add Viacheslav Dubeyko and
John Paul Adrian Glaubitz as maintainers of HFS/HFS+ driver.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/20250417223507.1097186-1-slava@dubeyko.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert ftm-quaddec.txt to yaml format.
Additional changes:
- Remove "status" at example.
- Remove label at example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250410222509.3242241-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The Rockchip RK3576 SoC features a new audio controller, the Serial
Audio Interface, or SAI for short. It is capable of both sending and
receiving audio over up to 4 lanes for each direction using the I2S,
PCM or TDM formats.
This driver is derived from the downstream vendor driver. That is why
its original author, Sugar Zhang, is listed as a Co-developer, with
their signoff. Since adjustments to make the driver suitable for
upstream were quite extensive, I've added myself to the authors and put
myself as the commit author; all added bugs are my fault alone, and not
that of the original author at Rockchip.
The hardware is somewhat similar to the Rockchip I2S-TDM hardware when
judged based on their register map, except it uses the same mclk for
tx and rx. It appears to be much more flexible with regards to TDM.
The loopback stuff and mono mode are new as well.
In line with the changes that were made to the Rockchip I2S-TDM driver
after upstreaming, the mclk-calibrate functionality was dropped, and
setting the mclk rate properly is now left up to the Common Clock
Framework, similar to how it is in the upstream I2S-TDM driver now.
A spinlock has been introduced to protect register write accesses that
depend on the bclk/fs to be stopped, i.e. XFER[1:0] being 0. I couldn't
find whether the asoc core held a per-instance lock so only one callback
can run at a time, and so it seemed prudent to add this.
I couldn't successfully test whether TDM was working, though I've tried
with a TAS6424 codec board. I'm not sure yet whether to blame the codec
driver, this version of the SAI driver, or the vendor implementation of
the SAI driver. The TDM mask registers remain untouched in both this
version and the downstream vendor version, which is suspicious, though
the Linux ASoC core wouldn't be able to support the 128 (!!!) slots of
TDM the hardware supports anyway.
Regular old 2-channel stereo I2S thrown at an I2S stereo codec works
well though. I tested with the CPU-side SAI controller in provider mode
and an Everest ES8388 codec as the consumer.
Some vendor driver features (no-dmaengine, fifo rockchip performance
monitoring, many kcontrols) were dropped for this initial upstream
version. They can always be added later if they make sense for upstream.
Co-developed-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250410-rk3576-sai-v2-6-c64608346be3@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rockchip introduced a new audio controller called the "Serial Audio
Interface", or "SAI" for short, on some of their newer SoCs. In
particular, this controller is used several times on the RK3576 SoC.
Add a schema for it, with only an RK3576 compatible for now. Other SoCs
may follow as mainline support for them lands.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250410-rk3576-sai-v2-5-c64608346be3@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These files are already correctly covered by the S390 NETWORKING DRIVERS
section. In practice commits for these drivers feed into the Networking
subsystem. So it seems appropriate to also list them under NETWORKING
DRIVERS.
This aids developers, and tooling such as get_maintainer.pl
alike to CC patches to all the appropriate people and mailing lists.
And is in keeping with an ongoing effort for NETWORKING entries
in MAINTAINERS to more accurately reflect the way code is maintained.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417-ism-maint-v1-2-b001be8545ce@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ism.h appears to be part of s390 networking drivers
so add it to the corresponding section in MAINTAINERS.
This aids developers, and tooling such as get_maintainer.pl
alike to CC patches to the appropriate people and mailing lists.
And is in keeping with an ongoing effort for NETWORKING entries
in MAINTAINERS to more accurately reflect the way code is maintained.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417-ism-maint-v1-1-b001be8545ce@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaAR3JgAKCRDdBJ7gKXxA
jtmLAP9d1h4Y7BnjJ876oPm8s3GQoasiAP6AJw3hbK7rX880vwD8DqU1IM3bTBDu
Z9ro41MvytxWKRMEaaYUMcrh04l1IQk=
=Fcx+
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"16 hotfixes. 2 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS"
[ Basic counting skills are clearly not a strictly necessary requirement
for kernel maintainers. - Linus ]
* tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add section for locking of mm's and VMAs
mm: vmscan: fix kswapd exit condition in defrag_mode
mm: vmscan: restore high-cpu watermark safety in kswapd
MAINTAINERS: add Pedro as reviewer to the MEMORY MAPPING section
mm/memory: move sanity checks in do_wp_page() after mapcount vs. refcount stabilization
mm, hugetlb: increment the number of pages to be reset on HVO
writeback: fix false warning in inode_to_wb()
docs: ABI: replace mcroce@microsoft.com with new Meta address
mm/gup: fix wrongly calculated returned value in fault_in_safe_writeable()
MAINTAINERS: add memory advice section
MAINTAINERS: add mmap trace events to MEMORY MAPPING
mm: memcontrol: fix swap counter leak from offline cgroup
MAINTAINERS: add MM subsection for the page allocator
MAINTAINERS: update SLAB ALLOCATOR maintainers
fs/dax: fix folio splitting issue by resetting old folio order + _nr_pages
mm/page_alloc: fix deadlock on cpu_hotplug_lock in __accept_page()
Toolchain and infrastructure:
- Fix missing KASAN LLVM flags on first build (and fix spurious
rebuilds) by skipping '--target'.
- Fix Make < 4.3 build error by using '$(pound)'.
- Fix UML build error by removing 'volatile' qualifier from io helpers.
- Fix UML build error by adding 'dma_{alloc,free}_attrs()' helpers.
- Clean gendwarfksyms warnings by avoiding to export '__pfx' symbols.
- Clean objtool warning by adding a new 'noreturn' function for 1.86.0.
- Disable 'needless_continue' Clippy lint due to new 1.86.0 warnings.
- Add missing 'ffi' crate to 'generate_rust_analyzer.py'.
'pin-init' crate:
- Import a couple fixes from upstream.
-----BEGIN PGP SIGNATURE-----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=fm2H
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix missing KASAN LLVM flags on first build (and fix spurious
rebuilds) by skipping '--target'
- Fix Make < 4.3 build error by using '$(pound)'
- Fix UML build error by removing 'volatile' qualifier from io
helpers
- Fix UML build error by adding 'dma_{alloc,free}_attrs()' helpers
- Clean gendwarfksyms warnings by avoiding to export '__pfx' symbols
- Clean objtool warning by adding a new 'noreturn' function for
1.86.0
- Disable 'needless_continue' Clippy lint due to new 1.86.0 warnings
- Add missing 'ffi' crate to 'generate_rust_analyzer.py'
'pin-init' crate:
- Import a couple fixes from upstream"
* tag 'rust-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: helpers: Add dma_alloc_attrs() and dma_free_attrs()
rust: helpers: Remove volatile qualifier from io helpers
rust: kbuild: use `pound` to support GNU Make < 4.3
objtool/rust: add one more `noreturn` Rust function for Rust 1.86.0
rust: kasan/kbuild: fix missing flags on first build
rust: disable `clippy::needless_continue`
rust: kbuild: Don't export __pfx symbols
rust: pin-init: use Markdown autolinks in Rust comments
rust: pin-init: alloc: restrict `impl ZeroableOption` for `Box` to `T: Sized`
scripts: generate_rust_analyzer: Add ffi crate
Add a sample Rust auxiliary driver based on a PCI driver for QEMU's
"pci-testdev" device.
The PCI driver only registers an auxiliary device, in order to make the
corresponding auxiliary driver probe.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250414131934.28418-6-dakr@kernel.org
[ Use `ok_or()` when accessing auxiliary::Device::parent(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the basic auxiliary abstractions required to implement a
driver matching an auxiliary device.
The design and implementation is analogous to PCI and platform and is
based on the generic device / driver abstractions.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414131934.28418-4-dakr@kernel.org
[ Fix typos, `let _ =` => `drop()`, use `kernel::ffi`. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
I'm currently maintaining the PCI endpoint subsystem and reviewing the
native host bridge and endpoint drivers. However, this affects my endpoint
maintainership role since I cannot merge endpoint patches that depend on
the controller drivers (which is more common). Moreover, the controller
driver patches would also benefit from a helping hand in maintaining them.
So I'd like to step up to maintain the native host bridge and endpoint
drivers together with the endpoint subsystem.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250418094905.9983-1-manivannan.sadhasivam@linaro.org
The TI FPC202 dual port controller serves as a low-speed signal aggregator
for common port types such as SFP, QSFP, Mini-SAS HD, and others.
It aggregates GPIO and I2C signals across two downstream ports, acting as
both a GPIO controller and an I2C address translator for up to two logical
devices per port.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The FPC202 dual port controller serves as a low speed signal aggregator for
common port types, notably SFP. It provides access to I2C and low-speed
GPIO signals of a downstream device through a single upstream control
interface.
Up to two logical I2C addresses can be accessed on each of the FPC202's
ports. The port controller acts as an I2C translator (ATR). It converts
addresses of incoming and outgoing I2C transactions. One use case of this
is accessing two SFP modules at logical address 0x50 from the same upstream
I2C controller, using two different client aliases.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Recently in the discussion with David the idea of having
a common helper popped up. The helper converts the given
bits per word to bytes. The result will always be power-of-two
(e.g. for 37 bits it returns 8 bytes) or 0 for 0 input.
More details are in the respective code comment.
This mini-series introduces it and replaces current users
under drivers/spi and we expect more (and possibly some
lurking in other subsystems).
We place this under memory mapping as related to memory mapping
abstractions in the form of mm_struct and vm_area_struct (VMA). Now we
have separated out mmap/vma locking logic into the mmap_lock.c and
mmap_lock.h files, so this should encapsulate the majority of the mm
locking logic in the kernel.
Suren is best placed to maintain this logic as the core architect of VMA
locking as a whole.
Link: https://lkml.kernel.org/r/e6ed679a184ca444b20dfa77af96913fd8b5efa0.1744799282.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pedro has offered to review memory mapping code. He has good experience
in this area and has provided excellent feedback on memory mapping series
in the past so I feel he'll be a great addition.
Link: https://lkml.kernel.org/r/20250416135301.43513-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The madvise code straddles both VMA and page table manipulation. As a
result, separate it out into its own section and add maintainers/reviewers
as appropriate.
We additionally include the mman-common.h file as this contains the shared
madvise flags and it is important we maintain this alongside madvise.c.
Link: https://lkml.kernel.org/r/20250411072724.10841-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Jann Horn <jannh@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MEMORY MAPPING does not list the mmap.h trace point file, but does list
the mmap.c file. Couple the trace points with the users and authors of
the trace points for notifications of updates.
Link: https://lkml.kernel.org/r/20250411173328.8172-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a subsection for the page allocator, including compaction as it's
crucial for high-order allocations and works together with the
anti-fragmentation features. Add reviewers (including myself) who
voluteered.
Link: https://lkml.kernel.org/r/20250410090021.72296-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Christoph Lameter (Ampere) <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With permission, reduce the number of maintainers. Create a CREDITS entry
for Joonsoo (Pekka already has one). Thanks for all the work!
Link: https://lkml.kernel.org/r/20250410090021.72296-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Christoph Lameter (Ampere) <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Socfpga's DWMAC glue comes in a variety of flavours with multiple
options when it comes to physical interfaces, making it not so easy to
test. Having access to a Cyclone5 with RGMII as well as Lynx PCS
variants, add myself as a maintainer to help with reviews and testing.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250416125453.306029-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CE4100 PCI specific code has no 'pci' suffix in the filename,
intel_mid_pci.c is the only one that duplicates the folder name in its
filename, drop that redundancy.
While at it, group the respective modules in the Makefile.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20250407070321.3761063-1-andriy.shevchenko@linux.intel.com
Current release - regressions:
- 2 fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth: hibmcge: fixes for link and MTU handling, pause frames etc.
- eth: igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EObk
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
A collection of small fixes since the previous PR. All are
device-specific like quirks, new IDs, and other safe (or rather
boring) changes.
-----BEGIN PGP SIGNATURE-----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=MjEv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
I am moving on to other things and longfang is going to
take over the role of hisi_dma maintainer. Update the
MAINTAINERS accordingly.
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20250402085423.347526-1-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ovpn-cli tool can be compiled and used as selftest for the ovpn
kernel module.
[NOTE: it depends on libmedtls for decoding base64-encoded keys]
ovpn-cli implements the netlink and RTNL APIs and can thus be integrated
in any script for more automated testing.
Along with the tool, a bunch of scripts are provided that perform basic
functionality tests by means of network namespaces.
These scripts take part to the kselftest automation.
The output of the scripts, which will appear in the kselftest
reports, is a list of steps performed by the scripts plus some
output coming from the execution of `ping`, `iperf` and `ovpn-cli`
itself.
In general it is useful only in case of failure, in order to
understand which step has failed and why.
Please note: since peer sockets are tied to the userspace
process that created them (i.e. exiting the process will result
in closing the socket), every run of ovpn-cli that created
one will go to background and enter pause(), waiting for the
signal which will allow it to terminate.
Termination is accomplished at the end of each script by
issuing a killall command.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-23-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit introduces basic netlink support with family
registration/unregistration functionalities and stub pre/post-doit.
More importantly it introduces the YAML uAPI description along
with its auto-generated files:
- include/uapi/linux/ovpn.h
- drivers/net/ovpn/netlink-gen.c
- drivers/net/ovpn/netlink-gen.h
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-2-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
OpenVPN is a userspace software existing since around 2005 that allows
users to create secure tunnels.
So far OpenVPN has implemented all operations in userspace, which
implies several back and forth between kernel and user land in order to
process packets (encapsulate/decapsulate, encrypt/decrypt, rerouting..).
With `ovpn` we intend to move the fast path (data channel) entirely
in kernel space and thus improve user measured throughput over the
tunnel.
`ovpn` is implemented as a simple virtual network device driver, that
can be manipulated by means of the standard RTNL APIs. A device of kind
`ovpn` allows only IPv4/6 traffic and can be of type:
* P2P (peer-to-peer): any packet sent over the interface will be
encapsulated and transmitted to the other side (typical OpenVPN
client or peer-to-peer behaviour);
* P2MP (point-to-multipoint): packets sent over the interface are
transmitted to peers based on existing routes (typical OpenVPN
server behaviour).
After the interface has been created, OpenVPN in userspace can
configure it using a new Netlink API. Specifically it is possible
to manage peers and their keys.
The OpenVPN control channel is multiplexed over the same transport
socket by means of OP codes. Anything that is not DATA_V2 (OpenVPN
OP code for data traffic) is sent to userspace and handled there.
This way the `ovpn` codebase is kept as compact as possible while
focusing on handling data traffic only (fast path).
Any OpenVPN control feature (like cipher negotiation, TLS handshake,
rekeying, etc.) is still fully handled by the userspace process.
When userspace establishes a new connection with a peer, it first
performs the handshake and then passes the socket to the `ovpn` kernel
module, which takes ownership. From this moment on `ovpn` will handle
data traffic for the new peer.
When control packets are received on the link, they are forwarded to
userspace through the same transport socket they were received on, as
userspace is still listening to them.
Some events (like peer deletion) are sent to a Netlink multicast group.
Although it wasn't easy to convince the community, `ovpn` implements
only a limited number of the data-channel features supported by the
userspace program.
Each feature that made it to `ovpn` was attentively vetted to
avoid carrying too much legacy along with us (and to give a clear cut to
old and probalby-not-so-useful features).
Notably, only encryption using AEAD ciphers (specifically
ChaCha20Poly1305 and AES-GCM) was implemented. Supporting any other
cipher out there was not deemed useful.
Both UDP and TCP sockets are supported.
As explained above, in case of P2MP mode, OpenVPN will use the main system
routing table to decide which packet goes to which peer. This implies
that no routing table was re-implemented in the `ovpn` kernel module.
This kernel module can be enabled by selecting the CONFIG_OVPN entry
in the networking drivers section.
NOTE: this first patch introduces the very basic framework only.
Features are then added patch by patch, however, although each patch
will compile and possibly not break at runtime, only after having
applied the full set it is expected to see the ovpn module fully working.
Cc: steffen.klassert@secunet.com
Cc: antony.antony@secunet.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-1-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
or aren't considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaABuqgAKCRDdBJ7gKXxA
jkZ7AQCkxrzIxZs7uUcHZNIGpNhbhg0Dl07j6txgf7piCBSk4wD+LX6skmC2CXLF
QWDhw1+dKHY/Ha0TSQkXUlMTjAP1mA4=
=3vRc
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
Add dma_alloc_attrs() and dma_free_attrs() helpers to fix a build
error when CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, dma_alloc_attrs() and
dma_free_attrs() are included in both bindings_generated.rs and
bindings_helpers_generated.rs. The former takes precedence so behavior
remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_alloc_attrs` in crate `bindings`
--> rust/kernel/dma.rs:171:23
|
171 | bindings::dma_alloc_attrs(
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_alloc_pages`
|
::: rust/bindings/bindings_generated.rs:44568:5
|
44568 | / pub fn dma_alloc_pages(
44569 | | dev: *mut device,
44570 | | size: usize,
44571 | | dma_handle: *mut dma_addr_t,
44572 | | dir: dma_data_direction,
44573 | | gfp: gfp_t,
44574 | | ) -> *mut page;
| |___________________- similarly named function `dma_alloc_pages` defined here
error[E0425]: cannot find function `dma_free_attrs` in crate `bindings`
--> rust/kernel/dma.rs:293:23
|
293 | bindings::dma_free_attrs(
| ^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_free_pages`
|
::: rust/bindings/bindings_generated.rs:44577:5
|
44577 | / pub fn dma_free_pages(
44578 | | dev: *mut device,
44579 | | size: usize,
44580 | | page: *mut page,
44581 | | dma_handle: dma_addr_t,
44582 | | dir: dma_data_direction,
44583 | | );
| |______- similarly named function `dma_free_pages` defined here
Fixes: ad2907b4e3 ("rust: add dma coherent allocator abstraction")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250412000507.157000-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Wentong is no longer with Intel, I will take over as the maintainer of the
Intel LJCA driver.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Wentong Wu <wentongw@amazon.com>
Link: https://lore.kernel.org/r/20250221083713.25947-1-lixu.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the one who participated in initial development of auxiliary bus
and later reviewed many of existing auxiliary bus consumers, I would
like to be CCed on all auxiliary bus changes.
Add myself as a reviewer to do not miss new development in that area.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Link: https://lore.kernel.org/r/b60e74e286b1d3935de46092470f716701c924a1.1743510317.git.leon@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Specifically list various Cirrus Logic and Wolfson Micro codec header files
under include/sound/ within the ASoC section of MAINTAINERS. Note that not
all the include/sound/cs* files are part of ASoC, so more-specific patterns
are needed.
These files are all part of ASoC codec drivers, and are owned by specific
Cirrus Logic and Wolfson Micro sections of MAINTAINERS. But the overall
include/sound/* maintainership is only Takashi Iwai and Jaroslav Kysela.
So by default get_maintainer.pl would only show Takashi and Jaroslav as
maintainers for any patch that changes these files without changing any
code under sound/soc.
There is a separate MAINTAINERS section for ASoC, so the headers must be
added there to make the ASoC maintainers show up in get_maintainer.pl.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415122927.512200-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver core git tree has moved, so properly document it.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/2025041447-showbiz-other-7130@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I have done quite some review on hugetlb code over the years, and some
work on it as well, the latest being the hugetlb pagewalk unification
which is a work in progress, and touches hugetlb code to great lengths.
HugeTLB does not have many reviewers, so I would like to help out by
offering myself as an official Reviewer.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Link: https://lkml.kernel.org/r/20250409082452.269180-1-osalvador@suse.de
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmf5ExAACgkQ+mJfZA7r
E8rS+Qf/WVswQAzNmDQxSBYvZJl7PFzk0zgrTTixwz8ePDezcnEE/+7VsMuQ3ZY+
k/7uve2WApoRAh8Z4+rpxHu/x3F4fI8oWXXt9Ug7f0OwVlKz4cgE5ax04m+90wqu
j7N5NZcGwMUEPR192GZqALxzSaWsRhPH0p8A32f9PU/Tq1+UTSEwwaMKDIRdmtiR
VHU8rS694tuXXuGoHiHOPMYDacxyQE7XRyTqaBaBvMQrjgbc+ZqcdG+b+Mnp3t6N
GIs4CkT6UkDEpnovA66FSiBWLBkrnNFfnyO5WEUbR13CB459XpwB0as8o2HW85oT
Q6Nui8w3ZeaGUi6U764fNm/FxFh4vw==
=3VwH
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-04-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
Add entry for i.MX SCMI extensions and myself as maintainer
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-7-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Bjorn, Krzysztof and I agreed that I will maintain the Rust PCI code.
Therefore, create a new entry in the MAINTAINERS file.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250407133059.164042-1-dakr@kernel.org
[ Align Krzysztof's email address. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes the KConfig for cs_dsp and cs-amp-lib tests so that
CONFIG_KUNIT_ALL_TESTS doesn't cause them to add modules to the build.
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Andrew as kexec/kdump maintainer because he has been helping review
and merge ready kexec/kdump patches.
And I would like to nominate myself as kexec maintainer because I always
try to review generic kexec codes.
Link: https://lkml.kernel.org/r/20250328104402.16826-1-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Simon Horman <horms@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmf5JhcACgkQ10qiO8sP
aABRNg/9HIlOM4Sl2PmNC9eGZqVghboxmADjuLoj/3md+B+YU0WaF9IVQ3/FrePi
08CnZ5GTC5Efzd1evc9djiAG/9S0b6yilAJtp+oFT6HjSF1IXicWOb1A6heLirY3
UyNulN8nIFTjTYG+TUTFpiuDbGCjIkBsqLHZhr+TM4DE4Hq+WLwWB5hMr6Oqfc4D
VOnLGJTtZaPqJyFmr23tYDMbI10swpume2ZyHtVGUyrr/oDo6nZ3J9D9c/C8yO2g
ZTQWo+zLGeXLQVKkJ7F/rUEU8BXz/ebl+qiyl9GS6mGq50HCwWNPHe5SIkY0a/4Y
mCAkfb+Qf/3n7ktYv9jJIXAEON+CD3Xpd3xm2IOhOqJG6doD7p6xLMNRUaGWZH/s
YMm2bA65C3LXkLQvYctbIlikWPb2GaqGr8NkRIzvIp1AtYfxU2xIfmH+gHjqX8du
TECMWt+8N3E6l9wHWXYnixl7YaQJkv/1VxQ5y0MBF/lI1I8v5IAYUzfq4V4PkKC9
0yaLRdc46eKCV8R3Sph7021KCzjqYw8kFUQi/XrG+0ebh+f88F/jTpPh2N2ekdrM
8ayUzTho+bXrQCvjdyjDjDqfR1aPmgkeFo/SzPHhIUY97ZMLm37iK4bqNJ6Xb1oQ
oqqunSzL2d8g3u69nKRpIYF8Ot6ITa8AiHoBKHDzoknYYNj2jWg=
=FdK4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a handful of fixes, notably
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
* tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"
wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error
wifi: iwlwifi: pcie: set state to no-FW before reset handshake
wifi: wl1251: fix memory leak in wl1251_tx_work
wifi: brcmfmac: fix memory leak in brcmf_get_module_param
wifi: iwlwifi: mld: silence uninitialized variable warning
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()
wifi: at76c50x: fix use after free access in at76_disconnect
wifi: add wireless list to MAINTAINERS
iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled
wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning
wifi: iwlwifi: mld: reduce scope for uninitialized variable
====================
Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Huawei Matebook E Go tablet implements the UCSI interface in the
onboard EC. Add the glue driver to interface with the platform's UCSI
implementation.
This driver is inspired by the following drivers:
drivers/usb/typec/ucsi/ucsi_yoga_c630.c
drivers/usb/typec/ucsi/ucsi_glink.c
drivers/soc/qcom/pmic_glink_altmode.c
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250316094357.462022-1-mitltlatltl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's some crossover between venus and iris, I'd like to help out with
the reviews for iris to ensure we keep upstream chugging along.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stan has stepped back from active venus development as a result I'd like to
volunteer my help in keeping venus maintained upstream.
Discussing with the qcom team on this we agreed
+M for Dikshita
+R for me
Many thanks to Stan for his hard work over the years from originating this
driver upstream to his many years of maintenance of it too.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add ABI description for the alienware-wmi driver.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-12-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add driver admin-guide documentation for the alienware-wmi driver.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-11-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add ADI ADP5055 driver support. The device consists
of 3 buck regulators able to connect to high input voltages of up to 18V
with no preregulators.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://patch.msgid.link/20250409-upstream-adp5055-v6-2-faa6e810deb1@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation for devicetree bindings for ADP5055. The device consists
of 3 buck regulators able to connect to high input voltages of up to 18V
with no preregulators.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://patch.msgid.link/20250409-upstream-adp5055-v6-1-faa6e810deb1@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the UAPI for the Asahi driver targeting the GPU in the Apple
M1 and M2 series systems on chip. The UAPI design is based on other
modern Vulkan-capable drivers, including Xe and Panthor. Memory
management is based on explicit VM management. Synchronization is
exclusively explicit sync.
This UAPI is validated against our open source Mesa stack, which is
fully conformant to the OpenGL 4.6, OpenGL ES 3.2, OpenCL 3.0, and
Vulkan 1.4 standards. The Vulkan driver supports sparse, exercising the
VM_BIND mechanism.
This patch adds the standalone UAPI header. It is implemented by an open
source DRM driver written in Rust. We fully intend to upstream this
driver when possible. However, as a production graphics driver, it
depends on a significant number of Rust abstractions that will take a
long time to upstream. In the mean time, our userspace is upstream in
Mesa but is not allowed to probe with upstream Mesa as the UAPI is not
yet reviewed and merged in the upstream kernel. Although we ship a
patched Mesa in Fedora Asahi Remix, any containers shipping upstream
Mesa builds are broken for our users, including upstream Flatpak and
Waydroid runtimes. Additionally, it forces us to maintain forks of Mesa
and virglrenderer, which complicates bisects.
The intention in sending out this patch is for this UAPI to be
thoroughly reviewed. Once we as the DRM community are satisfied with the
UAPI, this header lands signifying that the UAPI is stable and must only
be evolved in backwards-compatible ways; it will be the UAPI implemented
in the DRM driver that eventually lands upstream. That promise lets us
enable upstream Mesa, solving all these issues while the upstream Rust
abstractions are developed.
https://github.com/alyssarosenzweig/linux/commits/agx-uapi-v7 contains
the DRM driver implementing this proposed UAPI.
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33984 contains
the Mesa patches to implement this proposed UAPI.
That Linux and Mesa branch together give a complete graphics/compute
stack on top of this UAPI.
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/20250408-agx-uapi-v7-1-ad122d4f7324@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Update MAINTAINERS file to reflect changes to Joel's email address for
upstream work.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Add GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge as keywords to
the GPIO entry so that we get notified if anybody tries to use these
deprecated symbols. We'll drop them from here once we remove them from
the kernel.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-3-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Blaize BLZP1600 GPIO controller is provided by VeriSilicon
Microelectronics based on the GPIO APB v0.2 design. It has 32
input/output ports which can be configured as edge or level
triggered interrupts. It also provides a de-bounce feature.
This controller is used on the Blaize BLZP1600 SoC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/20250327-kernel-upstreaming-add_gpio_support-v2-2-bbe51f8d66da@blaize.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ofdrm and simpledrm drivers are special as they operate on
externally provided framebuffers. Move them into their own sub-
directory. Will let them share common code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-5-tzimmermann@suse.de
Add reset controller driver for the T-HEAD TH1520 SoC that manages
hardware reset lines for various subsystems. The driver currently
implements support for GPU reset control, with infrastructure in place
to extend support for NPU and Watchdog Timer resets in future updates.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-3-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a YAML schema for the T-HEAD TH1520 SoC reset controller. This
controller manages resets for subsystems such as the GPU within the
TH1520 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-2-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Remove the entries for Arnaud Ebalard and Boris Brezillon as
requested.
Link: https://lore.kernel.org/linux-crypto/20f0162643f94509b0928e17afb7efbd@ssi.gouv.fr/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register a new driver(spi_amd_pci) for the HID2 SPI controller using the
PCI ID of the LPC bridge device.
Add a new common probe function in spi_amd driver to encapsulate the
code required for registering the controller driver. This function will be
utilized by both the existing ACPI driver and the newly introduced
PCI-based driver for the HID2 SPI controller. The MMIO register base
address of the HID2 SPI controller can be obtained from the PCI LPC bridge
registers.
By implementing these changes, the DMA buffer will be correctly associated
with the LPC bridge device, preventing IO_PAGE_FAULT caused by IOMMU when
the LPC bridge attempts DMA operations on addresses owned by the HID2
SPI controller.
Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250402121514.2941334-1-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
-----BEGIN PGP SIGNATURE-----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=GiQ6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
status db, ntb_perf double unmap (in error case), and MSI 64bit
arithmetic. Also, add new AMD NTB PCI IDs, update AMD NTB maintainer,
and pull in patch to reduce the stack usage in IDT driver.
-----BEGIN PGP SIGNATURE-----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=N7zn
-----END PGP SIGNATURE-----
Merge tag 'ntb-6.15' of https://github.com/jonmason/ntb
Pull ntb fixes from Jon Mason:
"Bug fixes for NTB Switchtec driver mw negative shift, Intel NTB link
status db, ntb_perf double unmap (in error case), and MSI 64bit
arithmetic.
Also, add new AMD NTB PCI IDs, update AMD NTB maintainer, and pull in
patch to reduce the stack usage in IDT driver"
* tag 'ntb-6.15' of https://github.com/jonmason/ntb:
ntb_hw_amd: Add NTB PCI ID for new gen CPU
ntb: reduce stack usage in idt_scan_mws
ntb: use 64-bit arithmetic for the MSI doorbell mask
MAINTAINERS: Update AMD NTB maintainers
ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk()
ntb: intel: Fix using link status DB's
ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
Current release - regressions:
- 4 fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so that
the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=phQZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfv22EACgkQYKtH/8kJ
UicOgBAAq+9CX/Fcvrzu4dHtNphY9JUkO2Jpzvuj9471Yo2E8UAvXFCOBa43gLHr
wCAvH1qF/ID/6UhHDC5tH+dHz5HzRYiIatzwO0V65W6rPhIqSBnLbmO4YGnryRwA
uOx/jd+tdgDJZCn1V0BrvWgYxPC7tE/tk8AJZiHaRG2awpXrRRjtu3WZCEI5+UF6
zoUOJoiesMm+ca9xbDJwhcgKPqnig+7XTHXtYF51JSyFSoxg1dDd9VJbZyq2eAtP
1Lsjwn+kQxywJruxAZFC0xEB3ormAGTchsecTUcf31hdtJfTGgJzanpZPKEX56gM
kxd0pJ2OwjMDN076bUZXmL4yzaC9fK8ecITHS4BKcY4GTtuPTvvYbNMg87Ag0/tr
i3rhZcYple973PM6fl1OztbEBJ2rGvUe10GZ+MTMEPUN24SA252zru55gdfLsIJp
kTRQmkpGjcZ2ZqahqlkBZ7QNVP9/e4C4mbmflLtFfKBID2ON30YFVEy+d2D1AVkm
7EzSvb12ntEb1S+17w6FFmERN7zaDBXG1M3mjecyZ33sEKI92sM9L/AFYkrhWe9b
JNi3h93FCK9CWQRULR2Yos7IHOIOeXVf3tXH4QXiH1mlRmZ9scCc75MqyhkbpR7H
uU7Bq3bhiwhcYeDbkFcyu+rl/9YxgwgW0hujx/WLuJ54V54q2cI=
=ENMh
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
Fixes:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
The following is an automated shortlog grouped by driver:
ISST:
- Correct command storage data length
MAINTAINERS:
- consistently use my dedicated email address
thinkpad_acpi:
- disable ACPI fan access for T495* and E560
- Fix NULL pointer dereferences while probing
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+/vRQAKCRBZrE9hU+XO
MStcAQDEc8URl/7qYzOV226aWHL3XeKIkb3XkFNn1klwbHAIIwD+KwNy3amvaeRX
fTNEvNngWO2jjjCSoUITgZGsLp8XcgU=
=YLB+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
* tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: consistently use my dedicated email address
platform/x86: ISST: Correct command storage data length
platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560
platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
- irqdomain cleanups from Jiry
- Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart
- Remove deadcode from fsl-mc bus
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCZ91HWxwcY2hyaXN0b3Bo
ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14CT4A/0Pi/m5rSAdYlvumCcBE
XrnZaFJq8JeSc2DWWPxE3yQaAQCdTZNdXQK1wLgvsVc9eAsfnrLYreo+KX56wjvK
c0+YAA==
=y8a5
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RBvv
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux into soc/drivers-2
FSL SOC Changes for 6.15:
- irqdomain cleanups from Jiry
- Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart
- Remove deadcode from fsl-mc bus
* tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
from Mike Rapoport fixes a couple of issues with the just-merged "arch,
mm: reduce code duplication in mem_init()" series.
- The 4 patch series "MAINTAINERS: add my isub-entries to MM part." from
Mike Rapoport does some maintenance on MAINTAINERS.
- The 6 patch series "remove tlb_remove_page_ptdesc()" from Qi Zheng
does some cleanup work to the page mapping code.
- The 7 patch series "mseal system mappings" from Jeff Xu permits
sealing of "system mappings", such as vdso, vvar, vvar_vclock, vectors
(arm compat-mode), sigpage (arm compat-mode).
- Plus the usual shower of singleton patches.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+4XpgAKCRDdBJ7gKXxA
jnwtAP43Rp3zyWf034fEypea36xQqcsy4I7YUTdZEgnFS7LCZwEApM97JvGHsYEr
Ns9Zhnh+E3RWASfOAzJoVZVrAaMovg4=
=MyVR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1.
Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2Zaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIgQCaAyMozdrZtTiOs1OcZEuTkoCtKrEAniqe0OiL
s7R6j2NoOIwo9d6hBsjh
=IH7I
-----END PGP SIGNATURE-----
Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2YPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2OQCgvxCyoeuNPuV4X89JdrgocMTMyTYAn15pGgDa
r7w9UDO/D7UqRnKEnFy+
=lJwK
-----END PGP SIGNATURE-----
Merge tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
Pravin has not been active for a while, missingmaints reports:
Subsystem OPENVSWITCH
Changes 138 / 253 (54%)
(No activity)
Top reviewers:
[41]: aconole@redhat.com
[31]: horms@kernel.org
[23]: echaudro@redhat.com
[8]: fw@strlen.de
[6]: i.maximets@ovn.org
INACTIVE MAINTAINER Pravin B Shelar <pshelar@ovn.org>
Let's elevate Aaron, Eelco and Ilya to the status of maintainers.
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401001520.2080231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ+1ZqAAKCRCRxhvAZXjc
oqO7AP4jdW03PHsk5zkbuUTzTTngkZQ1AypIJLTCYIoKPATMowD+ILMjOTsVOfxA
h38ziAM3tubsz1pwkGuIlsU+drwz5Ao=
=QfJV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Add a new maintainer for configfs
- Fix exportfs module description
- Place flexible array memeber at the end of an internal struct in the
mount code
- Add new maintainer for netfslib as Jeff Layton is stepping down as
current co-maintainer
- Fix error handling in cachefiles_get_directory()
- Cleanup do_notify_pidfd()
- Fix syscall number definitions in pidfd selftests
- Fix racy usage of fs_struct->in exec during multi-threaded exec
- Ensure correct exit code is reported when pidfs_exit() is called from
release_task() for a delayed thread-group leader exit
- Fix conflicting iomap flag definitions
* tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix conflicting values of iomap flags
fs: namespace: Avoid -Wflex-array-member-not-at-end warning
MAINTAINERS: configfs: add Andreas Hindborg as maintainer
exportfs: add module description
exit: fix the usage of delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()
netfs: add Paulo as maintainer and remove myself as Reviewer
cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory
exec: fix the racy usage of fs_struct->in_exec
selftests/pidfd: fixes syscall number defines
pidfs: cleanup the usage of do_notify_pidfd()
- Remove the IBM CAPI (cxl) driver
Thanks to: Andrew Donnellan.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ+0ppwAKCRAF0oADX8se
IW2NAQDU+ZNn8xlyePGg2lRE+RZHndB8QL3AqiA0G9MxOKf1zwEA1XxGuqhqhRTx
tMqKobTucDuDzS9IoE9jWXj5Eo9QBgs=
=lpPm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc",
error queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported,
avoid spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BDoM
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Core:
- Fix a possible NULL pointer dereference due to IBI coming when the target
driver is not yet probed.
Drivers:
- mipi-i3c-hci: Use I2C DMA-safe api
- svc: add Nuvoton npcm845 support
-----BEGIN PGP SIGNATURE-----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=pT5I
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The silvaco driver gets support for the integration of the IP in the
Nuvoton npcm845 SoC. There is also a fix for a possible NULL pointer
dereference that can happen with early IBIs. Summary:
Core:
- Fix a possible NULL pointer dereference due to IBI coming when the
target driver is not yet probed.
Drivers:
- mipi-i3c-hci: Use I2C DMA-safe api
- svc: add Nuvoton npcm845 support"
* tag 'i3c/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Add NULL pointer check in i3c_master_queue_ibi()
i3c: master: Drop duplicate check before calling OF APIs
i3c: master: svc: Fix implicit fallthrough in svc_i3c_master_ibi_work()
i3c: master: svc: Fix missing STOP for master request
i3c: master: svc: Use readsb helper for reading MDB
i3c: master: svc: Fix missing the IBI rules
i3c: master: svc: Fix i3c_master_get_free_addr return check
i3c: master: svc: Fix npcm845 DAA process corruption
i3c: master: svc: Fix npcm845 invalid slvstart event
i3c: master: svc: Fix npcm845 FIFO empty issue
i3c: master: svc: Add support for Nuvoton npcm845 i3c
dt-bindings: i3c: silvaco: Add npcm845 compatible string
dt-bindings: i3c: dw: Add power-domains
i3c: master: svc: Flush FIFO before sending Dynamic Address Assignment(DAA)
i3c: mipi-i3c-hci: Use I2C DMA-safe api
i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API
MAINTAINERS: Add Frank Li to Silvaco I3C
MAINTAINERS: Remove Conor Culhane from Silvaco I3C
Link: https://lkml.kernel.org/r/20250326215541.1809379-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Willaims <dan.j.williams@intel.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20250326215541.1809379-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Willaims <dan.j.williams@intel.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
