The Qualcomm USB glue is not separate of the Synopsys DWC3 core and
several of the snps,dwc3 properties (such as clocks and reset) conflicts
in expectation with the Qualcomm integration.
Using the newly split out Synopsys DWC3 core properties, describe the
Qualcomm USB block in a single block. The new binding is a copy of
qcom,dwc3 with the needed modifications.
It would have been convenient to retain the two structures with the same
compatibles, but as there exist no way to select a binding based on the
absence of a subnode/patternProperty, a new generic compatible is
introduced to describe this binding.
To avoid redefining all the platform-specific compatibles, "select" is
used to tell the DeviceTree validator which binding to use solely on the
generic compatible. (Otherwise if the specific compatible matches during
validation, the generic one must match as well)
Mark qcom,dwc3 deprecated, to favor expressing future platforms using
the new combined binding.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-2-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SM8750 uses the Synopsys DWC3 controller. Add this to the compatibles list
to utilize the DWC3 QCOM and DWC3 core framework. Other than a revision
bump to DWC3 controller rev2.00a, the controller on SM8750 does not add any
additional vendor specific features compared to previous chipsets.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250409-sm8750_usb_master-v4-3-6ec621c98be6@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It makes sense that ARRAY_SIZE(prop) should == ARRAY_SIZE(prop-names),
so allow that to happen with interrupts.
Fixes bogus warnings such as:
usb@c2f8800: interrupt-names: ['pwr_event', 'qusb2_phy', 'hs_phy_irq'] is too short
Fixes: 53c6d854be ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250308-topic-dt_bindings_fixes_usb-v2-1-3169a3394d5b@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for existing
drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fI8A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloPwCguHSvL8FM6Xwaxc/hdfalwI4c49AAnRECaMhR
mA1owvXgrKO3hjDHo2Sg
=Z5yt
-----END PGP SIGNATURE-----
Merge tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
Update dt-bindings to add primary controller of QCS615 to USB
DWC3 controller list.
Although this controller has a QUSB2 Phy, it belongs to a
generation of SoCs like SDM670/SDM845/SM6350 where DP/DM is
used for wakeup instead of qusb2_phy interrupt.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241224084621.4139021-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
X1 has multiple DWC3 hosts, including one that's USB2, which naturally
means it doesn't have a SuperSpeed interrupt. Make it optional to fix
warnings such as:
usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241116-topic-x1e_usb2_bindings-v1-1-dde2d63f428f@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt changes for 6.13-rc1.
Overall, a pretty slow development cycle, the majority of the work going
into the debugfs interface for the thunderbolt (i.e. USB4) code, to help
with debugging the myrad ways that hardware vendors get their interfaces
messed up. Other than that, here's the highlights:
- thunderbolt changes and additions to debugfs interfaces
- lots of device tree updates for new and old hardware
- UVC configfs gadget updates and new apis for features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- typec driver updates and fixes
- lots of other small updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lBqA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTXQCfSs0ldBqZoINU/22q8BUg7ybb+pcAoL5EbbEm
b2igfp6YIEWAtUkactmO
=gwwq
-----END PGP SIGNATURE-----
Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.13-rc1.
Overall, a pretty slow development cycle, the majority of the work
going into the debugfs interface for the thunderbolt (i.e. USB4) code,
to help with debugging the myrad ways that hardware vendors get their
interfaces messed up. Other than that, here's the highlights:
- thunderbolt changes and additions to debugfs interfaces
- lots of device tree updates for new and old hardware
- UVC configfs gadget updates and new apis for features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- typec driver updates and fixes
- lots of other small updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property
dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property
dt-bindings: connector: Add time property for Sink BC12 detection completion
usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb
usb: dwc3: gadget: Cleanup SG handling
usb: dwc3: gadget: Fix looping of queued SG entries
usb: dwc3: gadget: Fix checking for number of TRBs left
usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
usb: ehci-spear: fix call balance of sehci clk handling routines
USB: make to_usb_device_driver() use container_of_const()
USB: make to_usb_driver() use container_of_const()
USB: properly lock dynamic id list when showing an id
USB: make single lock for all usb dynamic id lists
drivers/usb/storage: refactor min with min_t
drivers/usb/serial: refactor min with min_t
drivers/usb/musb: refactor min/max with min_t/max_t
drivers/usb/mon: refactor min with min_t
drivers/usb/misc: refactor min with min_t
drivers/usb/host: refactor min/max with min_t/max_t
...
Document compatible for the Synopsys DWC3 USB Controller on SAR2130P
platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241017-sar2130p-usb-v1-1-21e01264b70e@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update dt-bindings to add QCS8300 to USB DWC3 controller list.
The second controller of QCS8300 is High speed only capable and
doesn't have ss_phy_irq.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241009195348.2649368-2-quic_kriskura@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The X1E80100, just like its predecessors, has a Multiport controller.
This time around, 2 HS (eUSB) and 2 SS PHYs are attached.
Document it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240820-topic-h_mp-v2-1-d88518066372@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike MSM SoC, IPQ SoC doesn't use RPM to aggregate bandwidth
requests and scale the NoC frequency. The NoCs are turned on and
set to a specific frequency at boot time and that is used for the
lifetime of the system. Hence interconnect was not considered
previously.
The same approach was used for PCIe and at that point the
consensus was to move to interconnect. Hence implemented the ICC
driver and updating the existing USB driver to use the ICC
driver.
USB uses icc-clk framework to enable the NoC interface clock.
Hence the 'iface' clock is removed from the list of clocks.
Update the clock-names list accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-3-quic_varada@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPQ5332 has only three interrupts. Update the constraints
to fix the following dt_binding_check errors.
interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 53c6d854be ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240723100151.402300-2-quic_varada@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SC8180X platform has two single port DWC3 instances and a two-port
DWC3 instance. Add compatibles for these to the binding.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240610-sc8180x-dwc3-binding-compatible-v2-1-c7d5db9702a2@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event interrupts supported by this controller
(one for each port of multiport controller). Add all the 4 as
non-optional interrupts for SC8280XP-MP
Also each port of multiport has one DP and one DM IRQ. Add all DP/DM
IRQs related to 4 ports of SC8280XP Teritiary controller.
Also added SuperSpeed PHY interrupt for both Superspeed ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-6-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SDM660 was abusingly referencing one of the internal bus clocks, that
were recently dropped from Linux (because the original implementation
did not make much sense), circumventing the interconnect framework.
Drop it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-rpm_clk_cleanup-v3-1-a66e698932e3@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The high speed related interrupts present on QC targets are as follows:
1. dp/dm irq's
These IRQ's directly reflect changes on the DP/DM pads of the SoC. These
are used as wakeup interrupts only on SoCs with non-QUSB2 targets with
exception of SDM670/SDM845/SM6350.
2. qusb2_phy irq
SoCs with QUSB2 PHY do not have separate DP/DM IRQs and expose only a
single IRQ whose behavior can be modified by the QUSB2PHY_INTR_CTRL
register. The required DPSE/DMSE configuration is done in
QUSB2PHY_INTR_CTRL register of phy address space.
3. hs_phy_irq
This is completely different from the above two and is present on all
targets with exception of a few IPQ ones. The interrupt is not enabled by
default and its functionality is mutually exclusive of qusb2_phy on QUSB
targets and DP/DM on femto phy targets.
The DTs of several QUSB2 PHY based SoCs incorrectly define "hs_phy_irq"
when they should have been "qusb2_phy_irq". On Femto phy targets, the
"hs_phy_irq" mentioned is either the actual "hs_phy_irq" or "pwr_event",
neither of which would never be triggered directly are non-functional
currently. The implementation tries to clean up this issue by addressing
the discrepencies involved and fixing the hs_phy_irq's in respective DT's.
Classify SoC's into four groups based on whether qusb2_phy interrupt
or {dp/dm}_hs_phy_irq is used for wakeup in high speed and whether the
SoCs have hs_phy_irq present in them or not. The ss_phy_irq is optional
interrupt because there are mutliple SoC's which either support only High
Speed or there are multiple controllers within same Soc and the secondary
controller is High Speed only capable.
This breaks ABI on targets running older kernels, but since the interrupt
definitions are given wrong on many targets and to establish proper rules
for usage of DWC3 interrupts on Qualcomm platforms, DT binding update is
necessary. The bindings put pwr_event as the first interrupt and ss_phy as
the last. Since all SoCs have the pwr_event (HS) interrupt, but not all
controllers have the SS PHY interrupt, this would prevent, to some extent,
expressing that the SS PHY is optional by keeping it last in the binding
schema and making sure that minItems = maxItems - 1.
No new targets have been added to schema. Only the existing ones have been
re-ordered.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231227091951.685-2-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB/PHY/Thunderbolt fixes in here as well for later patches
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qualcomm SM6125 DWC3 USB controller comes with two interrupts (verified
with downstream/vendor code of Trinket DTSI from Xiaomi Laurel device).
Move the qcom,sm6125-dwc3 to appropriate place in allOf:if:then blocks
constraining interrupts.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20231111141953.51841-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 3828026c9e ("dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ca58c4ae75.
The patches for the features that these bindings described are still
under active development, so odds are these bindings will also have to
be changed in the future. As no in-tree code requires these bindings at
the moment, revert them.
Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/ZTeObdjSSok0tttg@hovoldconsulting.com
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event irq interrupts supported by this controller
(one for each port of multiport). Added all the 4 as non-optional
interrupts for SC8280XP-MP
Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM
IRQ's related to 4 ports of SC8280XP Teritiary controller.
Also added ss phy irq for both SS Ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230828133033.11988-2-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SDM660 SoC has two instances of DWC3 USB controller: one supporting USB
3.0 and one supporting only up to USB 2.0. The latter one does not use
iface clock, so allow such variant to fix dtbs_check warnings:
sda660-inforce-ifc6560.dtb: usb@c2f8800: clocks: [[37, 48], [37, 88], [37, 89], [37, 90]] is too short
sda660-inforce-ifc6560.dtb: usb@c2f8800: clock-names:2: 'iface' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230723141550.90223-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The binding does not have to specify assigned-clocks, because they are
already allowed by core DT schema. On the other hand, fixed
assigned-clocks in the binding will not fit different boards or SoCs.
Exactly this is the case for Qualcomm SuperSpeed DWC3 USB SoC controller
binding, where few boards have different assigned-clocks:
ipq8074-hk10-c1.dtb: usb@8cf8800: assigned-clocks: [[5, 131], [5, 132], [5, 133]] is too long
sdm660-xiaomi-lavender.dtb: usb@a8f8800: assigned-clocks: [[37, 92], [37, 91], [38, 64]] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230723141550.90223-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- New Support
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574, IPQ9574 USB3 PHY
- Updates
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmSlyssACgkQfBQHDyUj
g0d6yg/9Ghx1aHTN3DgdXQ0DNSv79IlQXSMP3KXQJgRxmMbdJyVIv/FdnEYRnXFD
Rhvfal/fbBiGh7VskrcuYjW8ijQ4cSyvcgu+2FeuPoRq/0x7S3XMlw/2Fex6H1wU
wCS2V3RVuePEQRYeO3eVHQyVxWEa8Qk+2Ry0KG1s9DBIZgeMuU2f1FRED6p9Ayz8
Q1dBA/mVpPnEFhhIaO66IpvTLZ2M8x+mk0wFLtDl7f5ImFz0A7lM+Dfr42rJ0rWi
A1YbTSpEMTKVaoNKhAxrqdIEZzlQ/sPWiqeDwA+Ao9l1N8Dn0UWVJfXIuwBi/XzK
9552nsWwQE4ikiEU4+mxq7pZqrlT5kt8axxdvIC9MH70yRTdrEH34IbOb2IaD+GM
oKW++7ZVyeFmSmy5XezrgYbHzEdh2HBESUrbrLUg0qFOR+5lccDOI2KxOKx08Myw
pLpjROADwwUpa2PJ3hTRhCGURPXRVPQuB2Du7s1ILH6Fckeq9rIbmYEVcKUt8dgu
ZJXCRMG7nEKmT5G6XND7pHfFmt+oA4zdQxnUpBOgY64RIcllbpkv1smbJYlyqfKG
1pvOSkzriacldQSVSuzUiQ3CFgVN1+NjBBSLHDd5UWilEKVCjP5+gNpLhg2oAiXu
VK6j8MeHOmVgVH2V2kSnNU9oUBorddoMiTua7ci14NbwqVwwjUU=
=ReXo
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574,
IPQ9574 USB3 PHY
UpdatesL
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding"
* tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (67 commits)
dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
dt-bindings: phy: intel,combo-phy: restrict node name suffixes
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
phy: tegra: xusb: check return value of devm_kzalloc()
phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
phy: qcom: add the SGMII SerDes PHY driver
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qualcomm: fix indentation in Makefile
phy: usb: suppress OC condition for 7439b2
phy: usb: Turn off phy when port is in suspend
phy: tegra: xusb: Clear the driver reference in usb-phy dev
dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
dt-bindings: phy: mxs-usb-phy: convert to DT schema format
dt-bindings: phy: qcom,qmp-usb: fix bindings error
dt-bindings: phy: qcom,qmp-ufs: fix the sc8180x regs
dt-bindings: phy: qcom,qmp-pcie: fix the sc8180x regs
phy: mediatek: tphy: add debugfs files
phy: core: add debugfs files
phy: fsl-imx8mp-usb: add support for phy tuning
...
Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
"biggest" thing in here is the removal of two obsolete drivers, u132-hcd
and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqC+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynP6QCg0MnpRjOSFyAB0t9LWFng4rRikj4AoIpxvs2T
GbU7NdPHU3fddq0KB+Nd
=M+Ib
-----END PGP SIGNATURE-----
Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present.
Add unevaluatedProperties or additionalProperties as appropriate, and
then add any missing properties flagged by the addition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Few Qualcomm SoCs require minimum performance level of power domain, so
allow it:
sm8550-mtp.dtb: usb@a6f8800: 'required-opps' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127121122.342191-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the SM8550 dwc3 compatible.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221116150600.3011160-1-abel.vesa@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Snapdragon 670 has DWC3 USB support. Add a compatible to reflect
that.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20220922024656.178529-3-mailingradian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a compatible for DWC3 found on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220716193257.456023-4-konrad.dybcio@somainline.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a wakeup-source property to the binding to describe whether the
wakeup interrupts can wake the system from suspend.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not all platforms have all of the four wakeup interrupts currently
described by the bindings.
Specifically, MSM8953/6/8 and SDM660 do not use the DP/DM interrupts,
while the SS PHY interrupt is optional on SDM660 and SC7280.
Note that no devicetree in mainline specify any wakeup interrupts for
- qcom,ipq4019-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
but let's keep the schema warnings about that for now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220713131340.29401-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SC8280XP to the DT schema.
Note that the SC8280XP controllers use the common set of five clocks and
an additional set of four interconnect clocks whose purpose is not
entirely clear at this point.
The set of wakeup interrupts is also different for SC8280XP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220713131340.29401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bindings defined strict clocks but several variants do not use them
in such order. Split the clocks and clock-names per variants to match
current DTS usage. In few cases this might not be complete match, due
to incomplete DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504131923.214367-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add compatibles for dedicated USB DWC3 blocks on Qualcomm IPQ8074,
MSM8994, QCS404 and SM6125. They differ against other variants in clock
and/or interrupts.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504131923.214367-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
