DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding. While touching the lines do
other non-functional changes: replace raw number with proper define for
GPIO flag and use generic node name.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250107125901.227995-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX8MP, there are 3 interrupts, the third interrupt is
SPDIF wakeup interrupt from PHY
Add ref: dai-common.yaml for #sound-dai-cells is needed and
XCVR is a DAI device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/1719481981-4069-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
The difference between each platform is in below table.
+---------+--------+----------+--------+
| SOC | PHY | eARC/ARC | SPDIF |
+---------+--------+----------+--------+
| i.MX8MP | V1 | Yes | Yes |
+---------+--------+----------+--------+
| i.MX93 | N/A | N/A | Yes |
+---------+--------+----------+--------+
| i.MX95 | V2 | N/A | Yes |
+---------+--------+----------+--------+
On i.MX95, there are two PLL clock sources, they are the parent
clocks of the XCVR root clock. one is for 8kHz series rates, named
as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
They are optional clocks, if there are such clocks, then the driver
can switch between them to support more accurate sample rates.
As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
clocks and clock-names properties.
On i.MX95, the 'interrupts' configuration has the same constraint
as i.MX93.
Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
there is no such hardware setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/1716972002-2315-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike i.MX8MP, i.MX93 has two XCVR interrupts.
Describe the two interrupts for the i.MX93 to fix the following
dt-schema warning:
imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long
from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206113047.2240055-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "fsl,imx93-xcvr" for i.MX93 platform.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20230104023953.2973362-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
