Dual-license this binding for consistency with other Tegra bindings and
move it into the soc/tegra directory.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document properly that Ebisu-support includes the Ebisu-4D variant, so
there won't be confusion what happened with support for this board.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004152751.3917-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add mt8188 svs compatible in dt-bindings.
Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230921052637.30444-2-chun-jen.tseng@mediatek.com
Document the Renesas SMARC Carrier-II EVK board which is based on the
Renesas RZ/G3S SMARC SoM. The SMARC Carrier-II EVK consists of an
RZ/G3S SoM module and a SMARC Carrier-II carrier board; the SoM module
sits on top of the carrier board.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-27-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On SM8450 and SM8550 based platforms, the Type-C plug orientation is given on a
GPIO line for each connector which are set by the PMIC(s).
Document this optional Type-C connector property, and take the
assumption an active level represents an inverted/flipped orientation.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231002-topic-sm8550-upstream-type-c-orientation-v2-1-125410d3ff95@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same
PM system controller, using ls2k0500 compatible as fallback for the
others.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add dt-bindings document for Graphics Core Information (GFXI) node. It
is used by NPCM video driver to retrieve Graphics core information.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Introduce MT7988 SoC compatibility string in mt7986-wo-ccif binding.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Document RZ/G3S (R9A08G045) SYSC bindings. The SYSC block found on the
RZ/G3S SoC is similar to the one found on the RZ/G2UL.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
These are the devicetree updates for Arm and RISC-V based SoCs,
mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips,
Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an
Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile
phone platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in
total, most of which are cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----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=bO3j
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
Cleanup bindings dropping the last remaining unneeded quotes. With this,
the check for this can be enabled in yamllint.
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> # for mtd
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for AT24/I2C
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230823183749.2609013-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
-----BEGIN PGP SIGNATURE-----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=SEyF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkC1sACgkQYKtH/8kJ
UifjiBAAnIlToZQERPaKlX1zQTYVfrMiyNQ8fyUGLnAj0bNFWFzYgS6p5NXerxdT
/sk2tipNqJyym3h797r2aAjAXpyTnKYIwZqGjvWGBbhaViv6ovuDYkJUBk0ffybB
a0Ve4M1JnVZATiwqeoZwi6/1/M2JC3+20O+LRL4lWzZAm61NsU4ULAcX4sHeUYYA
02wMfzkME0Ye7sthv9GBtbm8Szr+GEuDvUTXx0DI74QrZuj6+wl3rjZ2uRrT97ZX
DuPtmhl2ZVjCigCsfxdj2J8eq8dpkROAzAeGa9d/NctkCV+dHhSEWZ0LraauLCJk
iXA2ZXOACHWF4tn8TC/eDx0Pv6CS+gRVjyYYLNkWreDSPfk7Vqaua3iNc7AfhIJV
hfJV1QhDmRt+pXi8pJQSSbTtjfzaURzD78N7JLMRZdZPozRwD/kl1+m/r5OMT4C+
NI4cLB544Zb34WEUgjZYNUjk18vkZmEQnvWwAGIzOQgHq5m/m6o2QQOnTgiTwaXh
Neh8k+KKt85IwkjFarwmKsLhajHezHIEqgHrGdfiIFr9+hAMPBIgUP3/eo6PFDNk
XP+IVMeucEtn7Og6d6rQmJ0kPvL32ucdXWdqOwLijoDablFwX1Giif77LjN5LRYj
IxReK7C8CwZKqLf2k0pv8dLE4g8On6OThveedXbLNuMx+EgcB2w=
=RpyB
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the Loongson-2 SoC Power Management Controller binding with DT
schema format using json-schema.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230803063703.5659-2-zhuyinbo@loongson.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
-----BEGIN PGP SIGNATURE-----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=Ifxz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=namZ
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.6
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
arm64: dts: ti: verdin-am62: Add DSI display support
arm64: dts: ti: Add support for the AM62P5 Starter Kit
arm64: dts: ti: Introduce AM62P5 family of SoCs
dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
arm64: dts: ti: k3-am69-sk: Add phase tags marking
arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
arm64: dts: ti: k3-j784s4: Add phase tags marking
arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
arm64: dts: ti: k3-am62-main: Add node for DSS
arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-*: fix fss node dtbs check warnings
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
...
Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expenses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZNiusAAKCRB4tDGHoIJi
0u5JAP90hKhmPTWqxdRpnFrWi83k9RX4J6k5LHrqyt3e0sZ0HAD+JNiv4i4j8fDv
fm7usmraq8B2zLaV/AFmj9kiqdx0JgU=
=AH1c
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+tgF
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.6
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
riscv: dts: starfive: jh7110: Fix GMAC configuration
riscv: dts: starfive - Add hwrng node for JH7110 SoC
riscv: dts: starfive - Add crypto and DMA node for JH7110
riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
riscv: dts: starfive: jh7110: add dma controller node
riscv: dts: starfive: Add spi node and pins configuration
riscv: dts: starfive: Add USB dts node for JH7110
riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
riscv: dts: starfive: jh7110: Add syscon nodes
riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
...
Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RINGACC module on K3 SoCs have CFG register region which is usually
configured by a Device Management firmware. But certain entities such as
bootloader (like U-Boot) may have to access them directly. Describe this
region in the binding documentation for completeness of module
description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230809175932.2553156-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Document the System Control registers regions found on all Amlogic
SoC families and it's clock, power, pinctrl and phy subnodes.
The regions has various independent registers tied to other
hardware devices, thus the syscon compatible.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230706-b4-amlogic-bindings-convert-take2-v3-3-f63de6f12dcc@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
USB connector bindings is complete, thus no additional properties should
be allowed. Add missing 'reg' property and change additionalProperties
to false, so the schema will check for anything unexpected. This also
allows to drop the 'reg' from other bindings referencing the
usb-connector.yaml and make it required.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725102325.76336-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NVIDIA embedded controller bindings from the free-form text
format to json-schema.
Acked-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra AHB bindings from the free-form text format to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra flow controller bindings from the free-form text
format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are
described as remote processors in the device tree, with a dedicated
node where properties and services related to them can be described.
The Resource Power Manager (RPM) is also such a subsystem, with a
remote processor that is running a special firmware. Unfortunately,
the RPM never got a dedicated node representing it properly in the
device tree. Most of the RPM services are described below a top-level
/smd or /rpm-glink node.
However, SMD/GLINK is just one of the communication channels to the RPM
firmware. For example, the MPM interrupt functionality provided by the
RPM does not use SMD/GLINK but writes directly to a special memory
region allocated by the RPM firmware in combination with a mailbox.
Currently there is no good place in the device tree to describe this
functionality. It doesn't belong below SMD/GLINK but it's not an
independent top-level device either.
Introduce a new "qcom,rpm-proc" compatible that allows describing the
RPM as a remote processor/subsystem like all others. The SMD/GLINK node
is moved to a "smd-edge"/"glink-edge" subnode consistent with other
existing bindings. Additional subnodes (e.g. interrupt-controller for
MPM, rpm-master-stats) can be also added there.
Deprecate using the old top-level /smd node since all SMD edges
are now specified as subnodes of the remote processor.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-6-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To avoid several more small patches adding new RPM compatibles in the
future, add MDM9607, MSM8610, MSM8917, MSM8937 and MSM8952 at once.
All of these have been worked on over the time by some people and are
definitely compatible as-is with the smd-rpm driver.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-3-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MSM8909 is using qcom,smd-channels but is missing in the list, add it
there as well.
Fixes: 709d473dd5 ("dt-bindings: soc: qcom: smd-rpm: Add MSM8909")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-2-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some of the enum entries are not properly ordered, fix that.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-1-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Whitespace clean-ups in binding examples
- Restrict node name suffixes to "-[0-9]+" for cases of multiple
instances which don't have unit-addresses
- Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT schema
-----BEGIN PGP SIGNATURE-----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=cRW/
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- Whitespace clean-ups in binding examples
- Restrict node name suffixes to "-[0-9]+" for cases of multiple
instances which don't have unit-addresses
- Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT
schema
* tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: soc: qcom: stats: Update maintainer email
dt-bindings: cleanup DTS example whitespaces
dt-bindings: timestamp: restrict node name suffixes
dt-bindings: slimbus: restrict node name suffixes
dt-bindings: watchdog: restrict node name suffixes
dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
There are two new SoC families this time, and both appear fairly similar:
The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core
Cortex-A35 based chips for the low-power industrial embedded market,
and they mark the first 64-bit product in a widely used family of 32-bit
Arm MCUs and SoCs.
The way into the kernel is completely different here: The team at ST has
a long history of working upstream with their STM32MP1 and other SoCs,
and they produced a complete port to arm64 together with the initial
announcement. Nuvoton also has multiple SoC product lines with current
or previous upstream support, but those are maintained by third parties
and are unrelated. The patch series from Nuvoton's Jacky Huang had to
go through many revisisions to get to this point and is still missing
a few drivers including the serial port for the moment.
The branch contains the devicetree files as well as all the code changes,
in order to have something that can be tested standalone.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScqtkACgkQYKtH/8kJ
Uifqyg//XgvZBxb/2GILYcThVgLoo1fYA9tG5M0LERY/aPiUwrCwIl5swGQXK4vK
E3UBLsQURer4yEBRq7iB6RGbwa4Opjdy3yTkj6WSgEMPh6e6jGvmm+dJ7HuWeviS
8oeyo3Xar6tIF+A8xlBloHA4J6690FYB40McQzh8sWG5SE+id56S71NGnNW0kQTn
wsul9BZcGVoyMYNBi/uXtOVUPy7jF3UBC3HJF9UOT7q77bCLjVc/aHmmnZ3zmbYA
2oX3X5hVJakFba6vnz+rjNlzuAoGXJPDdsKFxBysdsksac/TxqRIQGNe75DZZVgz
ESTpt1QqjmCFw32HEzi8Ne22FOpzlBqUxBMznHPenpz1/om2ezs3q7ffuPqKvMaq
PANuK++JKJaBChVMzJbn84Sr1fvO4ecGJpKZTFC6t6SqHQNQFJT6rfMHx01Xw2wW
LjKfEBCR6zEXN0+FaaujgJ4y/9pH1VHPynrZJG9WEwPUEZb2kJ/2RMXjNpzOWKiB
pWYV1oW2TqFKYKhFm/pjkbi6Rq76UwEi8fWWoGMkmeV3KZ/0GFauQhItu6mX3s7W
uGnUQyrBzWzUoashYFuNtXKHYdwuWgOmG660BXHkyxwvqV96ICGEJ+97zGIBDj81
F8zLxEjPbsEZqGGSosAyk9oYC6eh7eK2V7xx+CUYLTuKZw13zNo=
=zaVi
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are two new SoC families this time, and both appear fairly
similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
both dual-core Cortex-A35 based chips for the low-power industrial
embedded market, and they mark the first 64-bit product in a widely
used family of 32-bit Arm MCUs and SoCs.
The way into the kernel is completely different here: The team at ST
has a long history of working upstream with their STM32MP1 and other
SoCs, and they produced a complete port to arm64 together with the
initial announcement. Nuvoton also has multiple SoC product lines with
current or previous upstream support, but those are maintained by
third parties and are unrelated. The patch series from Nuvoton's Jacky
Huang had to go through many revisisions to get to this point and is
still missing a few drivers including the serial port for the moment.
The branch contains the devicetree files as well as all the code
changes, in order to have something that can be tested standalone"
* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
clk: nuvoton: Use clk_parent_data instead of string for parent clock
clk: nuvoton: Update all constant hex values to lowercase
clk: nuvoton: Add clk-ma35d1.h for driver extern functions
remoteproc: stm32: use correct format strings on 64-bit
MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
arm64: dts: st: add stm32mp257f-ev1 board support
dt-bindings: stm32: document stm32mp257f-ev1 board
arm64: dts: st: introduce stm32mp25 pinctrl files
arm64: dts: st: introduce stm32mp25 SoCs family
arm64: introduce STM32 family on Armv8 architecture
dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
pinctrl: stm32: add stm32mp257 pinctrl support
dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
Documentation/process: add soc maintainer handbook
reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
reset: Add Nuvoton ma35d1 reset driver support
clk: nuvoton: Add clock driver for ma35d1 clock controller
arm64: dts: nuvoton: Add initial ma35d1 device tree
dt-bindings: serial: Document ma35d1 uart controller
...
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
rk3588-based "General-register-files" register areas and a move to
C99 array inits for the dtpm driver to fix sparse warnings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmSGMvYQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVtnB/9Mm4ppU1GRJiK8TSZIVFfM5YZRoNyGgRXF
oGtF8LvMq7/v0Ep1G+NgvbwdwCpzlIM0Z9Uo/3AfVqft9rFN8TpKbYDLRGryuIbC
L+8kqk4pmBo/U6ZApwylUcBGNymyliHdsOYqMqbWqRvwK2tXbgMlO6c3Yna0VXD7
l8fvn9/jtHBQwVniF9iIGbQbAS+avJcyCamh8Wn/Hs5Ke60NRNUhLuvHs4mom82R
26IuO9QkkRQCU/hC22NydPnBmK7dSQMqiInI9XgoMYOZi9TJ8+OrTExc0kkUZVAL
i4Vg+XGmDXmTtAd11C6NjsLhMuzhsR1znk3ndQjsjUnw0QlhNSHP
=rrNf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=R3D1
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
An addition to the rk3588 power-domains, some new syscon compatibles for
rk3588-based "General-register-files" register areas and a move to
C99 array inits for the dtpm driver to fix sparse warnings.
* tag 'v6.5-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: dtpm: use C99 array init syntax
dt-bindings: soc: rockchip: add rk3588 pipe-phy syscon
dt-bindings: soc: rockchip: add rk3588 usb2phy syscon
soc: rockchip: power-domain: add rk3588 mem module support
Link: https://lore.kernel.org/r/10286366.nUPlyArG6x@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The detection of split/non-split firmware files in the MDT loader is
corrected. The Geni driver is updated to not enable unused interrupts,
in some configurations. The count unit for MSM8998 in BWMON is corrected.
RPM master stats driver is corrected to check for the right return value
of devm_ioremap().
Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to
the list of platforms.
-----BEGIN PGP SIGNATURE-----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=KYPl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YKVY
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.5
The detection of split/non-split firmware files in the MDT loader is
corrected. The Geni driver is updated to not enable unused interrupts,
in some configurations. The count unit for MSM8998 in BWMON is corrected.
RPM master stats driver is corrected to check for the right return value
of devm_ioremap().
Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to
the list of platforms.
* tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
Link: https://lore.kernel.org/r/20230615163104.1461905-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Konrad Dybcio is promoted, from reviewer, to co-maintainer.
The mdt_loader gets a fix to the detection of split binaries, where the
previous logic sometimes concluded that the first segments was not
split, in a split image. The unconditional calling of
scm_pas_mem_setup() turns out to cause a regression and is reverted.
The altmode subfunction of pmic_glink is enabled for SM8450.
A new driver for exposing power statistics from the RPM, for debugging
purposes, is introduced.
OCMEM gets a debug prints of the hardware version, QMI helpers are
transitioned to alloc_ordered_workqueue() and an error message in
ramp_controller is improved.
An API is introduced to the SMEM driver to allow other drivers to query
the SoC id, rather than open-coding the parsing of the relevant SMEM
item. This is then used to clean up the Qualcomm NVMEM-based cpufreq
driver.
Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302.
-----BEGIN PGP SIGNATURE-----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=9Fv4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4/0b
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.5
Konrad Dybcio is promoted, from reviewer, to co-maintainer.
The mdt_loader gets a fix to the detection of split binaries, where the
previous logic sometimes concluded that the first segments was not
split, in a split image. The unconditional calling of
scm_pas_mem_setup() turns out to cause a regression and is reverted.
The altmode subfunction of pmic_glink is enabled for SM8450.
A new driver for exposing power statistics from the RPM, for debugging
purposes, is introduced.
OCMEM gets a debug prints of the hardware version, QMI helpers are
transitioned to alloc_ordered_workqueue() and an error message in
ramp_controller is improved.
An API is introduced to the SMEM driver to allow other drivers to query
the SoC id, rather than open-coding the parsing of the relevant SMEM
item. This is then used to clean up the Qualcomm NVMEM-based cpufreq
driver.
Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302.
* tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
soc: qcom: ocmem: Add OCMEM hardware version print
cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
cpufreq: qcom-nvmem: use SoC ID-s from bindings
soc: qcom: smem: introduce qcom_smem_get_soc_id()
soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: socinfo: move SMEM item struct and defines to a header
soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer
dt-bindings: sram: qcom,imem: Document MSM8226
soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
soc: qcom: socinfo: Add IDs for IPQ5018 family
dt-bindings: arm: qcom,ids: Add IDs for IPQ5018 family
soc: qcom: Introduce RPM master stats driver
dt-bindings: soc: qcom: Add RPM Master stats
soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues
soc: qcom: ramp_controller: Improve error message for failure in .remove()
dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
soc: qcom: rpmpd: use correct __le32 type
dt-bindings: soc: qcom: eud: Fix compatible string in the example
...
Link: https://lore.kernel.org/r/20230611010044.2481875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Linux RPMh implementation refrains from sending some RPMh votes until
the system is about to enter suspend (which is indicated by all CPU cores
entering a low-power state). Lack of the power-domains property will make
it such that these votes are never sent.
Require the power-domains property as discussed in [1].
[1] https://lore.kernel.org/linux-arm-msm/20230512150425.3171122-1-quic_bjorande@quicinc.com/
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-rsc-v1-1-b4a985f57b8b@linaro.org
The pipe-phy syscon is used by rockchip,rk3588-naneng-combphy,
which in turn is the PHY for USB3, PCIe and SATA.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230522173423.64691-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Modify Nuvoton NPCM and MA35 platform board bindings
- Move 'nuvoton,npcm-gcr.yaml' from 'bindings/arm/npcm' to
'bindings/soc/nuvoton'.
- Rename the 'bindings/arm/npcm' directory to 'bindings/arm/nuvoton'.
- Add bindings for ARMv8-based Nuvoton SoCs and platform boards, and
include the initial bindings for ma35d1 series development boards.
Modify MAINTAINERS
- Remove the line for 'bindings/arm/npcm/' under ARM/NUVOTON NPCM, as it
has been renamed.
- Add ARM/NUVOTON MA35 for Nuvoton MA35 series SoCs maintainer and files.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a compatible for the PMIC Wrapper found on the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230412131216.198313-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The RPM MSG RAM contains per-RPM-master (e.g. APPS, ADSP etc.) sleep
statistics. They let one assess which core is actively preventing the
system from entering a true low-power mode.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230405-topic-master_stats-v6-1-2277b4433748@linaro.org
The MSM8226 RPM uses SMD, so it must allow qcom,smd-channels:
qcom-msm8226-samsung-s3ve3g.dtb: rpm-requests: qcom,smd-channels: False schema does not allow ['rpm_requests']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230410181036.25943-1-krzysztof.kozlowski@linaro.org
Broadcom BCM23550 has a Cluster Dormant Control block that keeps the CPU
in idle state. A command needs to be sent to this block to bring the CPU
into running state.
This has been in use in mainline Linux since ~2016, but was never
documented. Add a dt-binding document for it.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230508135930.GA27583@standask-GA-A55M-S2HP
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
back the relevant compatible.
This reverts part of commit c40610198f ("soc: samsung: Remove
Exynos4212 related dead code").
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230501195525.6268-2-aweber.kernel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----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=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek, NXP,
Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all
add new features for existing machines, as well as new machines and
SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V
based D1 chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core
like its JH7100 predecessor, but with additional CPU cores
and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini
gets added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs,
based on the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the
Snapdragon family.
Including the initial board support for the added SoC platforms,
there are 52 new machines. The largest group are 19 boards
industrial embedded boards based on the NXP i.MX6 (32-bit)
and i.MX8 (64-bit) families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three "Banana Pi" variants based on the Amlogic g12b
(A311D, S922X) SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs,
including the rk3588s-khadas-edge2 and a few NanoPi
models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete "oxnas"
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the Qualcomm
Sc7180 "trogdor" design that were never part of products.
-----BEGIN PGP SIGNATURE-----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=j12m
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230322173501.3970991-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170205.4106310-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
smaller coding style changes
mtk-mutex:
- add support for mt8365 display and mt8195 VPP mutex
- add support for more then 32 mods
- use module_platform_driver instead of open coding
mtk-mmsys:
- add support for mt8195 RSZ switching
- add remove function
- use module_platform_driver instead of open coding
- split out mt8173 routing table from the legacy table
- bump up resets in mt8173 to 64
- add support for mt6795 (Helio X10)
- clean-up IS_REACHABLE code for cmdq
-----BEGIN PGP SIGNATURE-----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=8k5F
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DkhA
-----END PGP SIGNATURE-----
Merge tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers
mtk-svs:
smaller coding style changes
mtk-mutex:
- add support for mt8365 display and mt8195 VPP mutex
- add support for more then 32 mods
- use module_platform_driver instead of open coding
mtk-mmsys:
- add support for mt8195 RSZ switching
- add remove function
- use module_platform_driver instead of open coding
- split out mt8173 routing table from the legacy table
- bump up resets in mt8173 to 64
- add support for mt6795 (Helio X10)
- clean-up IS_REACHABLE code for cmdq
* tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits)
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
soc: mediatek: mutex: Use dev_err_probe()
soc: mediatek: mtk-mmsys: Add support for MT6795 Helio X10
soc: mediatek: mtk-mmsys: Change MT8173 num_resets to 64
soc: mediatek: mtk-mmsys: Split out MT8173 mmsys DDP routing table
soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ)
soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ
soc: mediatek: mtk-mutex: Use module_platform_driver() macro
soc: mediatek: mtk-mutex: Replace max handles number with definition
soc: mediatek: mtk-mutex: Compress of_device_id array entries
soc: mediatek: mtk-mmsys: Add MODULE_DEVICE_TABLE() to allow auto-load
soc: mediatek: mtk-mmsys: Compress of_device_id array entries
soc: mediatek: mtk-mmsys: Use module_platform_driver() macro
soc: mediatek: mtk-mmsys: Add .remove() callback
dt-bindings: soc: mediatek: add display mutex for MT8365 SoC
dt-bindings: soc: mediatek: specify which compatible requires clocks property
soc: mediatek: mtk-svs: add thermal voltage compensation if needed
soc: mediatek: mtk-svs: fix passing zero to 'PTR_ERR'
soc: mediatek: mtk-svs: delete node name check
soc: mediatek: mutex: support MT8195 VPPSYS
...
Link: https://lore.kernel.org/r/bc9f7a74-ce12-b323-021c-ff2c0473e979@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQ2CqEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM62WAf/cJ7W0MnV864M7GUBFKo4pO3brNFl
yumpJsbTtCDc5tl4h/UiLQeEq5rY3zudX8+nnMlkMT4uzSxjATmUMvLCnYb8Y8B8
sC2od3OXOn2xeR8XDL1OYTYFZ2NTj+V9n6IKd4y5DYfNSywLevUTenXG8JelC/OI
TAyMI1D+gjaB3dOs6V5Xoj7Pe9O5ImG3+Ev6scUGfEc95cDgJAeUxZ6cET2g55rN
0QUSlTFdNjw8S+DMEJcEIgiwg9kSJaSUJnVmSmijv6x0VE0Alo9ZBxChP8fY6Hve
GR0ks0MdhGgQWb4Gt8DdCkP5HakoKzVw0keUapiv2y0u/YqMdR540lphzQ==
=MLcb
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=PGBg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nYVY
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
-----BEGIN PGP SIGNATURE-----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=Bo2w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wYqZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.4
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
* tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
dt-bindings: firmware: document Qualcomm SC8180X SCM
dt-bindings: sram: qcom,imem: document SM6375 IMEM
soc: qcom: icc-bwmon: Handle global registers correctly
soc: qcom: icc-bwmon: Remove unused struct member
soc: qcom: smsm: Use dev_err_probe()
firmware: qcom_scm: Add SM6375 compatible
soc: qcom: llcc: Add configuration data for SM7150
dt-bindings: arm: msm: Add LLCC for SM7150
dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994
soc: qcom: pmic_glink: register ucsi aux device
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
firmware: qcom_scm: Clear download bit during reboot
dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible
dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
firmware: qcom_scm: Use fixed width src vm bitmap
dt-bindings: firmware: qcom,scm: document IPQ5332 SCM
dt-bindings: scm: Add compatible for IPQ9574
soc: qcom: rpmpd: Remove useless comments
...
Link: https://lore.kernel.org/r/20230410152421.4477-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present.
Add unevaluatedProperties or additionalProperties as appropriate, and
then add any missing properties flagged by the addition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Just like on Exynos5250, Exynos5420 and Exynos5433 the MIPI phy is
actually part of the Power Management Unit system controller thus allow
it as PMU's child.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207192851.549242-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
According to the mtk-mutex.c driver and the SoC DTS, the clock isn't
required to work properly for some of MTK SoC. Improve the clock
requirement by adding a condition which is function to the compatible.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230220-display-v1-14-45cbc68e188b@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170222.4107746-1-robh@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Drop the leading label in block controller examples, it is unused.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename blk_ctrl@ to blk-ctrl (with dash instead of underscore) in examples
so that they would match the imx8m[mn].dtsi in current Linux kernel.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-add the qcom,rpm-msm8994 compatible, dropped during conversion from
TXT to DT schema:
apq8094-sony-xperia-kitakami-karin_windy.dtb: smd: rpm:rpm-requests:compatible:0: 'qcom,rpm-msm8994' is not one of ['qcom,rpm-apq8084' ...]
Fixes: f935a752f2 ("dt-bindings: soc: qcom: smd-rpm: Convert binding to YAML schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305122428.167580-1-krzysztof.kozlowski@linaro.org
Document the compatible for RPM communication
over SMD for IPQ9574 SoC
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217142030.16012-2-quic_devipriy@quicinc.com
Document the LDB bridge subnode and add the subnode into the example.
For the subnode to work, the block control must scan its subnodes and
bind drivers to them, do not misuse either simple-bus or simple-mfd
here.
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Align the block controller example node name with Linux imx8mp.dtsi .
No functional change.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
The qcom,intents property is a list of pairs, thus it should be defined
as uint32-matrix.
Fixes: b2d7616e13 ("dt-bindings: soc: qcom: apr: add missing properties")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-5-krzysztof.kozlowski@linaro.org
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230307105645.5285-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable yamllint to check the preferred commenting style of requiring a
space after a comment character '#'. Fix the cases in the tree which
have a warning with this enabled. Most cases just need a space after the
'#'. A couple of cases with comments which were not intended to be
comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and
brcm,bcmgenet.yaml.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230303214223.49451-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatible for MT8195 VPPSYS on MUTEX.
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206091109.1324-2-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add "renesas,rzn1d400-eb" which target the RZ/N1 EB board when an
RZ/N1D-DB daughter board is plugged on it.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230209133507.150571-2-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the QMC (QUICC Multichannel Controller)
available in some PowerQUICC SoC such as MPC885 or MPC866.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-6-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the time slot assigner (TSA)
available in some PowerQUICC SoC such as MPC885
or MPC866.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip RK3399
PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties
-----BEGIN PGP SIGNATURE-----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=ywsL
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
Convert Qualcomm G-Link RPM edge binding to DT schema. Move it to
remoteproc as it better suits the purpose - communication channel with
remote processor.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for
TV boxes and so far only comes with a dts for its refernece design.
The other 32-bit boards that were added are two ASpeed AST2600 based BMC
boards, the Microchip sam9x60_curiosity development board (Armv5 based!),
the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53
and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113 chip,
plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700 non-merge
changesets, among them over 400 alone for Qualcomm. The newly added SoCs
this time are all recent high-end embedded SoCs for various markets,
each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410),
SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568,
RK3566 and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding
to the total number of changes.
-----BEGIN PGP SIGNATURE-----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=I8Ga
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes for
Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1.
-----BEGIN PGP SIGNATURE-----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=4Xcx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes
for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1"
* tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
dt-bindings: soc: samsung: exynos-pmu: allow phys as child
ARM: imx: mach-imx6ul: add imx6ulz support
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: drop redundant "ARMv8" from Kconfig option title
ARM: ep93xx: Convert to use descriptors for GPIO LEDs
ARM: s3c: fix s3c64xx_set_timer_source prototype
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
ARM: BCM63xx: remove useless goto statement
ARM: omap2: make functions static
ARM: omap2: remove unused omap2_pm_init
ARM: omap2: remove unused declarations
ARM: omap2: remove unused functions
ARM: omap2: smartreflex: remove on_init control
ARM: omap2: remove APLL control
ARM: omap2: simplify clock2xxx header
ARM: omap2: remove unused omap_hwmod_reset.c
ARM: omap2: remove unused headers
...
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmPmiz4VHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FMZ8QANXJEr7U2KX/yd4riBju6Btn0unl
I8TR5XlaQAoBUbyp4yTcCUfCe0mEiNcE/YgJwzSKY3mNxc9vLhn1GgqdF+5RFTZw
0H8GBjUpQiRoCC2+pq3YCEisQ49HYXy9W3ys6t1Y3l8xUDLhw5CkeKOGQCqeBDX7
pCflPy7HFUQwPhGt7AOmpNj8+Kh4GnpJHF3D2ShAMFNOn4+l0v8Gh7zDw62FmhBg
gjA7eS2aZS7KmqEJMAC4dEFdmhvvN+a80KaWNOOQn2sdLtD64pRW2hknxinPRN+t
dGQKeD+VGFHLfxWO40Lv0nP8P/EWjXiZdhO8HXLmVjHC56G/MG8AW0BkvxW9jPAa
QGlzY0TbEbi0MbbAnyCJTy6USGtVUZbEmfcZ8r3rUJX5xO8eszSjueD6fH/nKIgo
hDIIG8nSLf5TCY+NJzGr8dKENiElsgsfdNAypoX6kpXCRUCXxkiKlWzy/3oywVcO
bKm5xs76YNNaANFf46oO6kts7nrOcegyTAdvauFemy1Q3KSWQuFP4jNpcRvWnVMN
8/BlQ+a5uGofN/wwHS2CPmE1r8njEqlPc7wWNc0ugoRO4kAUtB2UldjjS/ZfaFvH
BZiDDXhjScPj8lKk4kzGOb34W5AKkwFbTwSR1oN0ckW9UNDx51pNu72YlU8WLydV
VHmzD9ndTkWSmp7W
=+KgT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8eLr
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
dt-bindings: soc: qcom: Introduce PMIC GLINK binding
soc: qcom: dcc: Drop driver for now
Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
-----BEGIN PGP SIGNATURE-----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=EWZ7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B0bJ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
platforms and implement USB Type-C handling and battery management.
This binding describes the component in the OS used to communicate with
the firmware and connect it's resources to those described in the
Devicetree, particularly the USB Type-C controllers relationship with
USB and DisplayPort components.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201041853.1934355-2-quic_bjorande@quicinc.com
New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.
A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.
As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmPatMIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVOAB/4tGUPXZQ/M4UV3NBOP5x0Btpk93MbhPl3m
i1jINiYawlh3hbVwrE5mnbtt/eZSUyMeAoBerv/aliUrk6EIGanl1MzDjXomv+BH
0ljl0sxCjMpNcQ+/GSMzLI225ZqtK3dLClgioaq6/hL9rnK4gSDngbHWAqfEdWLk
hbK52w90ovWcvcgStASUycPfj1RXjQnBbrt6K8BejhGhzln/B74dKy2k0v5QoG1F
/y/JJMTpHPXi1Sd/1/dFYipkTTjKLs6tkPUl7exh3FBjuOWanBTzKDIF1sbEOPXZ
sOW7T4sA672kmUtDcLuTtt7ENJzF/rWTiKvpl0LhjrsO1Jy7n1pn
=egzW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=oLg+
-----END PGP SIGNATURE-----
Merge tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New SoC supported is the rk3588.
New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.
A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.
As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.
* tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Correct the model name for Radxa E25
arm64: dts: rockchip: Drop unneeded model for Radxa CM3i
arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25
arm64: dts: rockchip: Fix compatible for Radxa CM3
arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3
arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
arm64: dts: rockchip: add display to RG503
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards
arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
dt-bindings: arm: rockchip: Add Radxa Compute Module 3
arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a
arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series
arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
arm64: dts: rockchip: fix hdmi cec on rock-3a
arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x
...
Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of redefining the 'ti,sci' and 'ti,sci-dev-id' properties multiple
times, reference the common schema where they are defined. Most cases
using these properties already do this, just udma and ringacc need to be
fixed.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230125221339.3057322-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Rename phy-rockchip-inno-usb2.yaml to a more common format of
rockchip,inno-usb2phy.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/99794484-d67e-ee1f-4e76-200de20a879c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
based boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXHOQUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6glgf/a3qSfIg5wGK3C0KEXqWzFfWIFRUk
ya3idK8x4rvCKEau4MpTZTQSW0o4+BuMMD/A0p+Eaz4y+vGeMNMNelD8lPhc1JuF
zxaatveiydrPFxRiKSUc3EE+RCtDLcJnqPSAcvX4Lzl0RAdVg8P+VjWMliWt5ZL1
iDkRA2xYkmkkzBmPzaShZyZ+o/d4r1r3hrqUwRu7SYsJwWGX5lT3DLZtafVciVFp
RbHTxKM7cQiboXZvj667LynUqdjrkrxjX5Bz24xxyKWL7omgwYWHyTYd6HLqkksQ
5GpVC+Dmo4gWaXuDbHIPn55utSdUhDChmaRGANPuXmyQPSLIin5yY+jgkw==
=+USu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPYPnMACgkQmmx57+YA
GNnQJBAAwkVek51qyNbZZBeQeQHoep+zK456N80TYb7VPk2JW+eh1XQFxt4NeGm2
yZ8w5BdVWZcGqXdEL2BvYkAg5L8/6yOe9k0vB3wd/yTU7BJDU2VyMy3wuENw0elX
ywGkNnaUZnhdtmtAeEvynldMFaT3dnGhnGvbvjb8V3P0vgwToKcKXTK30oULJq66
J887utqGUfJfjYfthJujzonvtWPXc/l4Xr3XCehW05OiCIcqzFWszCXqjv2lxHCQ
p5xxZe0TYST6wjUJKtCSPyP4/utB94Bre+CDxvIb45/tG8FcPURvIYDuWfuog5Bn
qu2YrHNYkSRKOoTy8ChkREw5U8RQECrgrYsrIx6HF2EuXIvnF6B+d5kVwLtgn+Dv
PcLE+PAzcdLgfCx4SGDOHVs54CkWAGpS6StRGty8znz+SKyQ6A751fyrcdYRdWpb
DzsThZLxi32Z9PXG1Xp7iL8PMfrZ8FnpBuFsJYWf0Gj2ZvaNILxPQ/YJZYIiMjOq
y5PURPo6lj9ys37NsOAQM//ctrMOP8eJLF9Gb3pKwY7+Ae3QadVx3HlF5haIw7yb
NKV3ywEOMm1Uiv4PUY62ysCCgwq6yQYDwiUna10QcDZH/9hrZJEzHE3ECbxVgk4w
rzOgLBSmT65I4CK3YghFLnAgq7DjjuIKyNbqDdAU6/Hs8rKruRw=
=pCXd
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 6.3:
- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
based boards.
* tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add verdin yavia carrier-board
dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM
dt-bindings: arm: Document the rest of i.MX28 based boards
dt-bindings: arm: fsl: Fix bindings for APF28Dev board
dt-bindings: power: fsl,imx-gpc: document interrupt-controller
dt-bindings: power: fsl,imx-gpc: correct compatibles
dt-bindings: power: fsl,imx-gpc: document fsl,imx6ul-gpc compatible
dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit
dt-bindings: arm: Move i.MX8MM Cloos PHG Board to TQM entry
dt-bindings: arm: Split i.MX8M Plus DHCOM based boards
dt-bindings: arm: Split i.MX8M Mini NITROGEN SoM based boards
dt-bindings: arm: Move MX8Menlo board to i.MX8M Mini Toradex Verdin SoM entry
dt-bindings: soc: imx: add IOMUXC GPR support
dt-bindings: arm: fsl: Add the Starterkit SK-iMX53 board
dt-bindings: vendor-prefixes: add Startkit
dt-bindings: soc: imx8mp-hsio-blk-ctrl: add clock cells
dt-bindings: arm: fsl: Enumerate Debix Model A Board
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
Link: https://lore.kernel.org/r/20230130023947.11780-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add new converted rockchip,rk3288-dp-phy.yaml to grf.yaml file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[dropped the unrelated blank line removals that didn't apply]
Link: https://lore.kernel.org/r/5759c6e1-9c89-4cb2-dd57-83a8db09f547@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MIPI and DisplayPort phys are actually part of the Power Management
Unit system controller, thus allow them as its children, instead of
specifying as separate device nodes with syscon phandle.
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The child nodes 'pinctrl', 'usb-hub', and 'clock-controller' in the
socionext,uniphier-soc-glue binding are not patterns, but the full node
name, so move them to 'properties'. As patterns, they were missing start
and end anchors so any prefix or suffix was allowed.
Fixes: 0611adff8b ("dt-bindings: soc: socionext: Add UniPhier SoC-glue logic")
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230120020339.3223112-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Convert soc/mediatek/pwrap.txt to soc/mediatek/mediatek,pwrap.yaml
- Add syscon compatible const for mt8186 and mt8195 to match the DTS needs,
which is missing from pwrap.txt.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20221005-mt6357-support-v8-2-560caaafee53@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Updated error handling in the async packer router driver made an
optional property required, fix this. Also improve error handling in the
probe function of the CPR driver.
-----BEGIN PGP SIGNATURE-----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=66gk
-----END PGP SIGNATURE-----
Merge tag 'qcom-driver-fixes-for-6.2' into drivers-for-6.3
Qualcomm driver fixes for v6.2
Updated error handling in the async packer router driver made an
optional property required, fix this. Also improve error handling in the
probe function of the CPR driver.
MSM8936/MSM8939 should like MSM8916 not require glink-channels.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117024846.1367794-3-bryan.odonoghue@linaro.org
Add IOC and PHP GRF syscon compatibles for RK3588.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230109155801.51642-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
"deprecated" keyword was indentend wrong - entire list of compatibles
starting with generic Exynos SoC compatible is deprecated.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: 0a2af7bdee ("dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynos850")
Link: https://lore.kernel.org/r/20230109083948.77462-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
modify VDOSYS0 mutex device tree Documentations for MT8188.
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221206020046.11333-4-nathan.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The protection domain functionality exists only in SoCs starting from
MSM8998 [1], while the APR bindings are also used on older platforms.
Commit 41288c3058 ("ASoC: dt-bindings: qcom,apr: Split services to
shared schema") made the "qcom,protection-domain" required but it
should remain optional to avoid dtbs_check warnings on older platforms,
e.g.:
arch/arm64/boot/dts/qcom/apq8096-db820c.dtb:
apr: service@3: 'qcom,protection-domain' is a required property
From schema: Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
[1]: https://lore.kernel.org/all/20200312120842.21991-1-sibis@codeaurora.org/
Fixes: 41288c3058 ("ASoC: dt-bindings: qcom,apr: Split services to shared schema")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229151648.19839-2-stephan@gerhold.net
The HSIO blk-ctrl has a internal PLL, which can be used as a reference
clock for the PCIe PHY. Add clock-cells to the binding to allow the
driver to expose this PLL.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the device tree bindings for Data Capture and Compare(DCC).
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/eb758cbdc7bd0973b3ca154b11fb8db54cde805f.1672148732.git.quic_schowdhu@quicinc.com
Convert the non-SMD RPM node bindings to dt-schema, the old txt bindings
are now removed since all bindings were converted.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221005-mdm9615-pinctrl-yaml-v5-2-910019fb8b9b@linaro.org
Document the Qualcomm Ramp Controller, found on various legacy
Qualcomm SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117132956.169432-2-angelogioacchino.delregno@collabora.com
Add DT binding schema for components belonging to the platform-specific
AHCI glue layer implemented in UniPhier SoCs.
This AHCI glue layer works as a sideband logic for the host controller,
including core reset, PHYs, and some signals to the controller.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-18-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.
This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-17-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the ADAMV block implemented on Socionext
Uniphier SoCs.
The ADAMV block is analog signal amplifier that is a part of the external
video and audio I/O system. This block is implemented on LD11 and LD20,
and this is defined for controlling audio I/O reset only.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-16-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the SD interface block implemented on
Socionext Uniphier SoCs.
This SD interface block is attached outside SDHC, and has some SD related
functions such as clock control, reset control, mode switch, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-15-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the media I/O block implemented on
Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4,
and LD11 SoCs.
Media I/O block implemented on Socionext UniPhier SoCs is an integrated
component of the stream type peripherals including SD, USB2.0, eMMC,
and MIO-DMAC.
Media I/O block has a common logic to control the component.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-14-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the peripheral block implemented on
Socionext Uniphier SoCs.
Peripheral block implemented on Socionext UniPhier SoCs is an integrated
component of the peripherals including UART, I2C/FI2C, and SCSSI.
Peripheral block has some function logics to control the component.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-13-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the SoC-glue logic debug part
implemented on Socionext Uniphier SoCs.
This SoC-glue logic debug part is a set of miscellaneous function
registers handling signals for specific devices outside system
components, and also has multiple functions such as efuse, debug unit,
several monitors for specific SoC, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-12-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the SoC-glue logic implemented on
Socionext Uniphier SoCs.
This SoC-glue logic is a set of miscellaneous function registers
handling signals for specific devices outside system components,
and also has multiple functions such as I/O pinmux, usb-phy, debug,
clock-mux for a specific SoC, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-11-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the system controller implemented on
Socionext Uniphier SoCs.
This system controller has multiple functions such as clock control,
reset control, internal watchdog timer, thermal management, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-10-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Exynosautov9 has several different SYSREGs, so use dedicated compatibles
for them and deprecate usage of generic Exynosautov9 compatible alone.
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20221214044342.49766-4-sriranjani.p@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos850 has two different SYSREGs, hence add dedicated compatibles for
them and deprecate usage of generic Exynos850 compatible alone.
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221214044342.49766-2-sriranjani.p@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add compatible for Tesla SYSREG controllers found on FSD SoC.
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Reviewed-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://lore.kernel.org/r/20221129115531.102932-2-sriranjani.p@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos850 has dedicated clock for accessing SYSREGs. Allow it, even
though Linux currently does not enable it and relies on bootloader.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221127123259.20339-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos5433 has several different SYSREGs, so use dedicated compatibles
for them and deprecate usage of generic Exynos5433 compatible alone (as
it is too generic).
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Sriranjani P <sriranjani.p@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221127123259.20339-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Split Samsung Exynos SoC SYSREG bindings to own file to narrow the
bindings and do not allow other parts of syscon.yaml. This allows
further customization of Samsung SoC bindings.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Sriranjani P <sriranjani.p@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221127123259.20339-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "Node|Tree|Generic bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [gG]eneric [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\? description\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\? document\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Vinod Koul <vkoul@kernel.org> # phy
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221216163815.522628-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop trailing "Devicetree bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
bigger updates, the rest is driver updates all over the place
-----BEGIN PGP SIGNATURE-----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=/It5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core got a new helper 'i2c_client_get_device_id()', designware got
some bigger updates, the rest is driver updates all over the place"
* tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (41 commits)
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: xiic: Make sure to disable clock on .remove()
i2c: hisi: Add support to get clock frequency from clock
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
i2c: slave-eeprom: Convert to i2c's .probe_new()
i2c: mux: pca954x: Convert to i2c's .probe_new()
drivers/i2c: use simple i2c probe
i2c: mux: pca9541: switch to using .probe_new
i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
i2c: qcom-geni: add support for I2C Master Hub variant
i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
soc: qcom: geni-se: add desc struct to specify clocks from device match data
dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
i2c: tegra: Set ACPI node as primary fwnode
i2c: smbus: add DDR support for SPD
i2c: /pasemi: PASemi I2C controller IRQ enablement
...
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
This looks like a relatively calm development cycle; there have been
only few changes in ALSA and ASoC core sides while we get lots of
device-specific fixes and updates as usual. Most of commits are about
ASoC, including Intel SOF/AVS and many device tree updates.
Below are some highlights:
Core:
- Improvement in memalloc helper for fallback allocations
- More cleanups of ASoC DAPM code
ASoC:
- Factoring out of mapping hw_params onto SoundWire configuration
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740
- Lots of device tree conversions and fixups
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
ALSA:
- Addition of PCM kselftest; still minimalistic but can be extended
in future
- Fixes for corner-case XRUNs with USB-audio implicit feedback mode
- Usual device-specific quirk updates for USB- and HD-audio
- FireWire DICE updates
Also, this PR also contains a few cross-tree updates:
- Some OMAP board file updates for removal of relevant OMAP platforms
- A new I2C API update for I2C probe API adaption
- A DRM update for the further hdmi-codec updates
-----BEGIN PGP SIGNATURE-----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=QV3a
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This looks like a relatively calm development cycle; there have been
only few changes in ALSA and ASoC core sides while we get lots of
device-specific fixes and updates as usual. Most of commits are about
ASoC, including Intel SOF/AVS and many device tree updates.
Below are some highlights:
Core:
- Improvement in memalloc helper for fallback allocations
- More cleanups of ASoC DAPM code
ASoC:
- Factoring out of mapping hw_params onto SoundWire configuration
- The ever ongoing overhauls of the Intel DSP code continue,
including support for loading libraries and probes with IPC4 on
SOF.
- Support for more sample formats on JZ4740
- Lots of device tree conversions and fixups
- Support for Allwinner D1, a range of AMD and Intel systems,
Mediatek systems with multiple DMICs, Nuvoton NAU8318, NXP
fsl_rpmsg and i.MX93, Qualcomm AudioReach Enable, MFC and SAL,
RealTek RT1318 and Rockchip RK3588
ALSA:
- Addition of PCM kselftest; still minimalistic but can be extended
in future
- Fixes for corner-case XRUNs with USB-audio implicit feedback mode
- Usual device-specific quirk updates for USB- and HD-audio
- FireWire DICE updates
This also contains a few cross-tree updates:
- Some OMAP board file updates for removal of relevant OMAP platforms
- A new I2C API update for I2C probe API adaption
- A DRM update for the further hdmi-codec updates"
* tag 'sound-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (417 commits)
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
ALSA: patch_realtek: Fix Dell Inspiron Plus 16
ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.
ASoC: dt-bindings: Correct Alexandre Belloni email
ASoC: dt-bindings: maxim,max98504: Convert to DT schema
ASoC: dt-bindings: maxim,max98357a: Convert to DT schema
ASoC: dt-bindings: Reference common DAI properties
ASoC: dt-bindings: Extend name-prefix.yaml into common DAI properties
ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const
ASoC: uniphier: aio-core: Make some read-only arrays static const
ASoC: wcd938x: Make read-only array minCode_param static const
ASoC: qcom: lpass-sc7280: Add maybe_unused tag for system PM ops
ASoC : SOF: amd: Add support for IPC and DSP dumps
ASoC: SOF: amd: Use poll function instead to read ACP_SHA_DSP_FW_QUALIFIER
ALSA: usb-audio: Workaround for XRUN at prepare
ALSA: pcm: Handle XRUN at trigger START
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
drm: tda99x: Don't advertise non-existent capture support
ASoC: hdmi-codec: Allow playback and capture to be disabled
kselftest/alsa: Add more coverage of sample rates and channel counts
...
Bluetooth controllers share the common local-bd-address property.
Add a generic YAML schema to replace bluetooth.txt for those.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants
While we have occasionally merged support for non-arm SoCs in the past,
this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M2 Ultra)
chips now have initial support. This is particularly nice as I am
typing this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250
(Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670),
MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile
phone chips that are closely related to others we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google
(Pixel 3a). There are also new variants of the Herobrine and Trogdor
chromebook motherboards. SA8540P is an automotive SoC used in the
Qdrive-3 development platform
- Rockchips gains no new SoC variants, but a lot of new boards:
three mobile gaming systems based on RK3326 Odroid-Go/rg351 family,
two more Anbernic gaming systems based on RK3566 and a number of
other RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo
Aura2 ebook reader, two i.MX8 based development boards, two Uniphier
Pro5 development boards, the STM32MP1 testbench board from DHCOR,
the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10
based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168,
TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm
and Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built.
-----BEGIN PGP SIGNATURE-----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=WCFd
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
variants.
While we have occasionally merged support for non-arm SoCs in the
past, this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
now have initial support. This is particularly nice as I am typing
this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
(Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
650) are all mobile phone chips that are closely related to others
we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
Google (Pixel 3a).
There are also new variants of the Herobrine and Trogdor chromebook
motherboards. SA8540P is an automotive SoC used in the Qdrive-3
development platform
- Rockchips gains no new SoC variants, but a lot of new boards: three
mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
more Anbernic gaming systems based on RK3566 and a number of other
RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
Kobo Aura2 ebook reader, two i.MX8 based development boards, two
Uniphier Pro5 development boards, the STM32MP1 testbench board from
DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
Helio X10 based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built"
* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
arm64: dts: apple: t6002: Fix GPU power domains
arm64: dts: apple: t600x-pmgr: Fix search & replace typo
arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
arm64: dts: apple: Rename dart-sio* to sio-dart*
arch: arm64: apple: t600x: Use standard "iommu" node name
arch: arm64: apple: t8103: Use standard "iommu" node name
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
arm64: dts: qcom: sm8450: align MMC node names with dtschema
arm64: dts: qcom: sc7180-trogdor: use generic node names
arm64: dts: qcom: sm8450-hdk: add sound support
arm64: dts: qcom: sm8450: add Soundwire and LPASS
...
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
-----BEGIN PGP SIGNATURE-----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=MwgS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u7Q7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.2
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
* tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the qcom,apr compatible, used by Qualcomm Asynchronous Packet
Router driver. There are no upstream DTSes using this compatible -
instead we have ones with APRv2 (qcom,apr-v2). The driver does not make
distinction between both compatibles, which raises the question whether
the compatible is really needed. Document it (as compatible with v2)
for completeness.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221201133637.46146-1-krzysztof.kozlowski@linaro.org
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.
Document the variant compatible, forbid UART and SPI sub-nodes,
and remove requirement for the Master AHB clock and iommu property.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Correct the APR/GPR example:
1. Use consistent 4-space indentation,
2. Add required properties to services nodes, so the binding check
passes once schema for these services is improved,
3. Add few other properties as APR/GPR is part of a GLINK edge:
qcom,glink-channels and qcom,intents.
4. Drop unnecessary services, to make the example compact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The APR/GPR nodes are organized like:
apr-or-gpr-device-node <- qcom,apr.yaml
apr-gpr-service@[0-9] <- qcom,apr.yaml
service-specific-components <- /schemas/sound/qcom,q6*.yaml
The schema for services (apr-gpr-service@[0-9]) already grows
considerably and is still quite not specific. It allows several
incorrect combinations, like adding a clock-controller to a APM device.
Restricting it would complicate the schema even more. Bringing new
support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as
well.
Simplify the qcom,apr.yaml by splitting the services to a shared file
which will be:
1. Referenced by qcom,apr.yaml with additionalProperties:true,
2. Referenced by specific bindings for services with
additionalProperties:false (not yet in this commit).
While moving the code, add also required 'reg' and
'qcom,protection-domain' to further constrain the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SM8450 and SC8280XP with Qualcomm GPR, the GLINK channel name
(qcom,glink-channels) for ADSP is "adsp_apps".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm driver updates for 6.2
The qcom,msm-id and qcom,board-id DeviceTree properties are documented,
to allow them to be used in configurations or devices requiring these
and the socinfo driver is updated to reuse the introduced identifiers.
The rpmh-rsc driver is extended to register for PM runtime notifications
from the CPU clusters, in order to submit sleep and wake votes the last
core in a cluster is being powered down.
A mechanism for keeping rpmhpd resources voted until sync_state is
introduced, this ensures that power-domains required during boot are
kept enabled. The rpmhpd power-domains for SDM670 are also added.
Support for the new QDU1000/QRU1000 platform is introduced in the rpmhpd
and socinfo drivers.
The APR driver gains missing error handling. QMI message descriptors in
the PDR driver are made const.
Support for the RPM found in SM6375 is added. The SPM driver gains
support for MSM8939 and MSM8976 platforms.
The stats and command-db drvers are marked as not having PM support.
* tag 'qcom-drivers-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (36 commits)
dt-bindings: firmware: scm: add sdm670 compatible
soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup
soc: qcom: rpmh-rsc: Save base address of drv
PM: domains: Store the next hrtimer wakeup in genpd
soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain
dt-bindings: soc: qcom: Update devicetree binding document for rpmh-rsc
dt-bindings: soc: qcom: qcom,smd-rpm: Use qcom,smd-channels on MSM8976
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000
soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains
dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding
dt-bindings: qcom: smp2p: Add WPSS node names to pattern property
soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM
dt-bindings: soc: qcom: spm: Add compatibles for MSM8976 L2
soc: qcom: llcc: make irq truly optional
soc: qcom: spm: Add MSM8939 SPM register data
dt-bindings: soc: qcom: spm: Add MSM8939 CPU compatible
dt-bindings: soc: qcom: aoss: Add sc8280xp compatible
dt-bindings: firmware: document Qualcomm SM6375 SCM
...
Link: https://lore.kernel.org/r/20221122202748.1854487-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DT binding documentation for System Configuration (SYS) found on
RZ/V2M SoC's.
SYS block contains the SYS_VERSION register which can be used to retrieve
SoC version information.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221116102140.852889-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the binding for the RX Wireless Ethernet Dispatch core on the
MT7986 ethernet driver used to offload traffic received by WLAN NIC and
forwarded to LAN/WAN one.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like MSM8916 and some others, MSM8976 uses qcom,smd-channels and not
qcom,glink-channels.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104172122.252761-5-angelogioacchino.delregno@collabora.com
WLAN firmware uses SMP2P protocol in order to talk to the application
processor (AP) in certain cases like WoW (Wake on Wireless). WLAN
firmware runs on the WPSS Q6 processor (Wireless Processor SubSystem).
Therefore it is required to have sub nodes pertaining to the WPSS Q6
processor and the application processor in the SMP2P node.
Add WPSS Q6 (Wireless Processor SubSystem) node names to the pattern
property required for WPSS Q6 processor to communicate to the
application processor and vice versa over SMP2P protocol.
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221017125346.3691-2-quic_mpubbise@quicinc.com
Document the "qcom,msm8939-saw2-v3.0-cpu" compatible for the CPU
Subsystem Power Manager (SPM) on the MSM8939 SoC.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221019171004.1080911-1-vincent.knecht@mailoo.org
renesas.yaml lists out all the Renesas SoC's and the platforms/EVK's which
is either ARM32/ARM64. It would rather make sense if we move renesas.yaml
to the soc/renesas folder instead. This is in preparation for adding a new
SoC (RZ/Five) from Renesas which is based on RISC-V.
While at it drop the old entry for renesas.yaml from MAINTAINERS file and
there is no need to update the new file path of renesas.yaml as we already
have an entry for Documentation/devicetree/bindings/soc/renesas/ folder.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920184904.90495-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Qualcomm Resource Power Manager (RPM) over SMD bindings contain
compatibles and description for RPM devices on two different
communication channels: SMD and GLINK. Except the difference in the
parent node, they use different properties for describing name of
channel qcom,smd-channels or qcom,glink-channels. The first one is
already present but second is missing:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: rpm-requests: 'qcom,glink-channels' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926092104.111449-2-krzysztof.kozlowski@linaro.org
The Qualcomm RPM over SMD contains devices for one or two PMIC
regulators - already used in several DTS files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926092104.111449-1-krzysztof.kozlowski@linaro.org
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----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=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
-----BEGIN PGP SIGNATURE-----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=MHQ/
-----END PGP SIGNATURE-----
Merge tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Mediatek MDP V3
- New driver for NXP i.MX DW100 dewarper
- Zoran driver got promoted from staging
- Hantro and related drivers got promoted from staging
- Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu,
meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci,
zr364xx)
- Usual set of driver fixes, improvements and cleanups
* tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits)
media: destage Hantro VPU driver
media: platform: mtk-mdp3: add MediaTek MDP3 driver
media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
media: dt-binding: mediatek: add bindings for MediaTek MDP3 components
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
media: xilinx: video: Add 1X12 greyscale format
media: xilinx: csi2rxss: Add 1X12 greyscale format
media: staging: media: imx: imx7-media-csi: Increase video mem limit
media: uvcvideo: Limit power line control for Sonix Technology
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
media: uvcvideo: Fix typo 'the the' in comment
media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()
media: uvcvideo: Fix memory leak in uvc_gpio_parse
media: renesas: vsp1: Add support for RZ/G2L VSPD
media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit
media: renesas: vsp1: Add support for VSP software version
media: renesas: vsp1: Add support to deassert/assert reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: amphion: fix a bug that vpu core may not resume after suspend
...
Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.
Across SoC vendors, Qualcomm and Freescale stick out as getting the most
updates, which corresponds to their dominance in the mobile phone and
embedded industrial markets, respectively.
There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.
Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:
- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.
- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial
and automotive applications.
- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.
- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.
- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.
The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.
The new machines based on existing SoC support are fairly uneventful:
- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.
- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels,
as they originally shipped running 32-bit code.
- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere
Mt. Mitchell
- Three new machines based on Rockchips RK3399 and RK3566:
Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab
- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board
- Two development boards in the Microchip AT91 family:
SAMA5D3-EDS and lan966x-pcb8290.
- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs.
-----BEGIN PGP SIGNATURE-----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=xPfV
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the changes fall into one of three categories: adding support
for additional devices on existing machines, cleaning up issues found
by the ongoing conversion to machine-readable bindings, and addressing
minor mistakes in the existing DT data.
Across SoC vendors, Qualcomm and Freescale stick out as getting the
most updates, which corresponds to their dominance in the mobile phone
and embedded industrial markets, respectively.
There are 636 non-merge changeset in this branch, which is a little
lower than most times, but more importantly we only add 36 machine
files, which is about half of what we had the past few releases.
Eight new SoCs are added, but all of them are variations of already
supported SoC families, and most of them come with one reference board
design from the SoC vendor:
- Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the
MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55
cores.
- TI AM62A is another member of the K3 family with Cortex-A53 cores,
this one is targetted at Video/Vision processing for industrial and
automotive applications.
- NXP i.MX8DXL is another chip for this market in the ever-growing
i.MX8 family, this one again with two Cortex-A35 cores.
- Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are
minor updates of R8A77951 and R8A77980, respectively.
- Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the
IPQ8064 chip, with minimally different features.
The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close
this time, but in the end did not make the cut.
The new machines based on existing SoC support are fairly uneventful:
- Sony Xperia 1 IV is a fairly recent phone based on Qualcomm
Snapdragon 8 Gen 1.
- Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and
Grand Max. These are added for both 32-bit and 64-bit kernels, as
they originally shipped running 32-bit code.
- Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt.
Mitchell
- Three new machines based on Rockchips RK3399 and RK3566: Anberic
RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab
- Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S,
i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board
- Two development boards in the Microchip AT91 family: SAMA5D3-EDS
and lan966x-pcb8290.
- Minor variants of existing boards using Amlogic, Broadcom, Marvell,
Rockchips, Freescale Layerscape and Socionext Uniphier SoCs"
* tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits)
Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
arm64: dts: uniphier: Add L2 cache node
arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node
arm64: dts: uniphier: Fix opp-table node name for LD20
arm64: dts: uniphier: Add USB-device support for PXs3 reference board
arm64: dts: uniphier: Add ahci controller nodes for PXs3
arm64: dts: uniphier: Use GIC interrupt definitions
arm64: dts: uniphier: Rename gpio-hog nodes
arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller
arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller
arm64: dts: uniphier: Rename pvtctl node to thermal-sensor
ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node
ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card
ARM: dts: uniphier: Add ahci controller nodes for PXs2
ARM: dts: uniphier: Add ahci controller nodes for Pro4
ARM: dts: uniphier: Use GIC interrupt definitions
ARM: dts: uniphier: Rename gpio-hog node
...
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmM+j54ACgkQmmx57+YA
GNkK1Q//fSzCHUPNTrZKJi8mRtp/32Nrpav3eorMZWltKnYbYQyhqH/LCuSZJfe/
rmGYFxsH6DHEgfHqqyzm6PNC0S4Hle6KiB5xnqXrTgqciPuSg4Fa9OMQgkbiQF6x
uB2KR+TouQA3MssQh6NW4wy5XAkEqudZCSnEyOTJTmdpepZd/1Eu2Rhn8kx5AYQN
pzYNGURRoirgYbO9vHMssCcpqyGNdR9SWXcOkROyd65L4LCHQ9JRh4etg7fSXP5j
abWtTHSOwD8MTXOENOiNw/vyCfBX7wUoJkY2v8OUo3G/20qbOXKWPWi056gyDjVQ
kJdlnnK4APtiluyBg2alEEZmJOd1iCaVP2j84EO1N4FEek2UGd/lMNOtAOJa+wbh
eiE6KC5gswe+99//PdY4gB+7dRM3I0gU7FDMl9G5A4DPMEE/0bMKLKk1jR5vyYXl
6QpN2N0OlU7d16MJiP9RvWf2/xJrcQrLQcy8FKvFVWClJ9wMvBXozKrvXgji9l3I
ZTW+EViQiyWmj6KbFlDZkYT+Q6YosxaogJUNrZeIaAwmwJj1oTa+M6jYRnFU6uha
XxG5TrybC9JQ/BpYCTYEqb16LOYALwEm7NWmylWASUCCZclC1u35qmmVEhDyBcS9
98ePumkAwrcjmW0TZsiYXOCQWNOITuvU/Ku2t/+6Mhg+Xl44zX4=
=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
Majority of changes at this PR are ASoC drivers (SOF, Intel, AMD,
Mediatek, Qualcomm, TI, Apple Silicon, etc), while we see a few
small fixes in ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual
-----BEGIN PGP SIGNATURE-----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=EWRA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek,
Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in
ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual"
* tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits)
ALSA: hda: Fix position reporting on Poulsbo
ALSA: hda/hdmi: Don't skip notification handling during PM operation
ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR
ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props
ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ASoC: mediatek: mt8192-mt6359: Set the driver name for the card
ALSA: hda/realtek: More robust component matching for CS35L41
ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag
ASoC: nau8825: Add TDM support
ASoC: core: clarify the driver name initialization
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"
ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"
ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model
ALSA: asihpi - Remove unused struct hpi_subsys_response
...
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth
on SDM845 and SC7280.
The LLCC driver is extended to provide per-platform register mappings to
the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the
passed qmi_elem_info to be const.
Support for SDM845 is added to the sleep stats driver. Power-domains for
the SM6375 platform is added to RPMPD and the platform is added to
socinfo, together with the PM6125 pmic id.
A couple of of_node reference issues are corrected in the smem state and
smsm drivers.
The Qualcomm SCM driver binding is converted to YAML.
-----BEGIN PGP SIGNATURE-----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=R/5I
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GSE8
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 6.1
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth
on SDM845 and SC7280.
The LLCC driver is extended to provide per-platform register mappings to
the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the
passed qmi_elem_info to be const.
Support for SDM845 is added to the sleep stats driver. Power-domains for
the SM6375 platform is added to RPMPD and the platform is added to
socinfo, together with the PM6125 pmic id.
A couple of of_node reference issues are corrected in the smem state and
smsm drivers.
The Qualcomm SCM driver binding is converted to YAML.
* tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
soc: qcom: rpmpd: Add SM6375 support
dt-bindings: power: rpmpd: Add SM6375 power domains
firmware: qcom: scm: remove unused __qcom_scm_init declaration
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
soc: qcom: icc-bwmon: force clear counter/irq registers
soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON
dt-bindings: interconnect: qcom,msm8998-bwmon: Add support for sc7280 BWMONs
soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver
soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version
soc: qcom: qmi: use const for struct qmi_elem_info
soc: qcom: icc-bwmon: remove redundant ret variable
dt-bindings: soc: qcom: stats: Document SDM845 compatible
soc: qcom: stats: Add SDM845 stats config and compatible
dt-bindings: firmware: document Qualcomm SM6115 SCM
soc: qcom: Make QCOM_RPMPD depend on OF
dt-bindings: firmware: convert Qualcomm SCM binding to the yaml
soc: qcom: socinfo: Add PM6125 ID
soc: qcom: socinfo: Add an ID for SM6375
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
...
Link: https://lore.kernel.org/r/20220921155753.1316308-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add support for mt8188
SVS:
- several driver cleanups
power-domain:
- several cleanups of the dt-bindings and driver
mutex:
- add support to mt6795 disp mutex
- add support for mt8186 mdp3 mutex
-----BEGIN PGP SIGNATURE-----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=VKXT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=64Bh
-----END PGP SIGNATURE-----
Merge tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pmic-wrapper:
- add support for mt8188
SVS:
- several driver cleanups
power-domain:
- several cleanups of the dt-bindings and driver
mutex:
- add support to mt6795 disp mutex
- add support for mt8186 mdp3 mutex
* tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: Add mmsys func to adapt to dpi output for MT8186
soc: mediatek: mutex: Add support for MT6795 Helio X10 display mutex
dt-bindings: soc: mediatek: Add display mutex support for MT6795
soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3
dt-bindings: soc: mediatek: Add mdp3 mutex support for mt8186
soc: mediatek: pm-domains: Simplify some error message
soc: mediatek: mtk-svs: Explicitly include bitfield header
soc: mediatek: mtk-svs: Use bitfield access macros where possible
soc: mediatek: mtk-svs: Commonize t-calibration-data fuse array read
dt-bindings: power: mediatek: Update maintainer list
dt-bindings: power: mediatek: Support naming power controller node with unit address
dt-bindings: power: mediatek: Refine multiple level power domain nodes
soc: mediatek: mtk-svs: Use devm variant for dev_pm_opp_of_add_table()
soc: mediatek: mtk-svs: Drop of_match_ptr() for of_match_table
soc: mediatek: mtk-svs: Remove hardcoded irqflags
soc: mediatek: mtk-svs: Switch to platform_get_irq()
dt-bindings: soc: mediatek: pwrap: add compatible for mt8188
soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF
Link: https://lore.kernel.org/r/498fe3e5-a237-121a-d500-fbb0994906cb@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add bindings for i.MX93 System Reset Controller(SRC). SRC supports
resets and power gating for mixes.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MP VPU blk ctrl module has similar design as i.MX8MM, so reuse
the i.MX8MM VPU blk ctrl yaml file. And add description for the items.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
minItems and maxItems are set as the same value. In such case minItems is
not necessary. So drop it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The APR bindings were not describing all properties already used in DTS:
1. Add qcom,glink-channels, qcom,smd-channels and qcom,intents (widely
used).
2. Add power-domains for MSM8996.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert Qualcomm Audio Device Manager (Q6ADM) bindings to DT schema.
The original bindings documented:
1. APR service node with compatibles: "qcom,q6adm" and
"qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>",
2. Routing child node with compatible "qcom,q6adm-routing".
The conversion entirely drops (1) because the compatible is already
documented in bindings/soc/qcom/qcom,apr.yaml. The
"qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>" on the other hand is not
used at all - neither in existing DTS, nor in downstream sources - so
versions seems to be fully auto-detectable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert Qualcomm Audio Stream Manager (Q6ASM) bindings to DT schema.
The original bindings documented:
1. APR service node with compatibles: "qcom,q6asm" and
"qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>",
2. actual DAIs child node with compatible "qcom,q6asm-dais".
The conversion entirely drops (1) because the compatible is already
documented in bindings/soc/qcom/qcom,apr.yaml. The
"qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>" on the other hand is not
used at all - neither in existing DTS, nor in downstream sources - so
versions seems to be fully auto-detectable.
Another change done in conversion is adding "iommus" property, which is
already used in DTS and Linux driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910091428.50418-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The APR bindings were not describing properly children nodes for DAIs.
None of the DTSes use unit addresses for the children, so correct the
nodes and reference their schema: clock-controller, dais and routing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SMD edge contains subnodes representing devices related to the remote
processor. With limietd number of remote processors, there is a limited
set of such devices.
List all of them in smd-edge bindings so schema can strictly check for
subnodes.
Additional benefit is requirement of "qcom,smd-channels" for such
subnodes, because their schema cannot enforce it (few devices like APR
or FastRPC can be part of either SMD or GLINK edge).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
This patch adds DT binding documentation for MediaTek's CCORR and
WDMA components.
These components exist in both MediaTek's Media Data Path 3(MDP3) and DRM,
and the bindings are placed under the folder "./soc/mediatek" to prevent
duplicate builds.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
SDM845 is a special case compared to the other platforms that use RPMh
stats, since it only has 2 stats (aosd and cxsd), while the others have
a 3rd one (ddr).
So in order for the driver to use the dedicated stats config, we added
the SDM845 dedicated compatible, which we document here.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812101240.1869605-4-abel.vesa@linaro.org
Add dt-binding documentation of pwrap for Mediatek MT8188
Signed-off-by: Sen Chu <sen.chu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220726104242.24839-1-sen.chu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
My professional e-mail will change and the BayLibre one will
bounce after mid-september of 2022.
This updates the MAINTAINERS file, the YAML bindings and adds an
entry in the .mailmap file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816095617.948678-1-narmstrong@baylibre.com
Document RZ/Five (R9A07G043) SYSC bindings. The SYSC block found on the
RZ/Five SoC is almost identical to one found on the RZ/G2UL (and alike)
SoC's. "renesas,r9a07g043-sysc" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
The SYSC block on RZ/Five has no interrupts to the core so to accommodate
this SoC make interrupts{,-names} properties optional.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220722141506.20171-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace existing limited example with proper code for Qualcomm Resource
Power Manager (RPM) over SMD based on MSM8916. This also fixes the
example's indentation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220723082358.39544-2-krzysztof.kozlowski@linaro.org
This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc, with
the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is also
introduced, to avoid out-of-sync updates for rapidly restarting remote
processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces a
number of smaller fixes and cleanups in the core and a few different
drivers.
-----BEGIN PGP SIGNATURE-----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=gbAX
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN
PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite
bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM memory
region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and
arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail
-----BEGIN PGP SIGNATURE-----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=8/kk
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813.
Each SoC comes with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the
Ethos-U65 NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end
of Arm based Laptop SoCs, and its automotive cousin, the
SA8540P. The SC8280XP is used in the Lenovo Thinkpad X13s
laptop that also gets added here in addition to the reference
boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the
Orange Pi zero2 single-board computer and the X96 Mate
set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip
in the Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers,
DH electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems
TQMa8MPQL, and phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and
Stratix 10 Software Virtual platform, both in the SoCFPGA
platform.
- Two new wireless devices based on Broadcom SoCs:
The Asus GT-AX6000 Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm
SoC families brought added machines: Acer Chromebook 514 (MT8192),
Acer Chromebook Spin 513 (MT8195) and a couple of SC7180 based
machines including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips:
PCB8309 (Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308)
DH DRC Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm
SDM660)
-----BEGIN PGP SIGNATURE-----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=X6mA
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
Correct all uses of "it's" that are meant to be possessive "its".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220801025221.30563-1-rdunlap@infradead.org
It contains one new LAN966 based board, namely pcb8309, a cleanup
on Makefile to sort alphabetically LAN966 entries and 2 cleanups
on bindings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYuDqzgAKCRCejrg/N2X7
/WPFAP4z2YlG5d+5leV6FWkrTMAOzQdSIJCn1dD8zVzvu0bPNQEA5KdCUBmu7fVR
jhxhVeu0LKfPnN6g/7BmguSGpwTyqws=
=Ldrk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLhQeIACgkQmmx57+YA
GNkyeRAAwfPJwRH7mcxySV14u6JJdbt5FjlFbUuDy8NUckBBXEtuXJYEWXN5cBs3
rajAF43GKBYTTqIqJzsY2DsWdJ2IKxTDosDZ/byIi071toAQHDXS59gBjFuMVNZk
QhdNyQ4Qayf9N0Q+dPBN9wIA2Fe5Cn/8Y1Xi+cJ9OpWT6FaT+nyOJ8lin1iMsuW5
anrE71tKwQHbIzwJ0QKoKvBxEimMA3TPK8PuBtOiIlkrYKr3BONtUk7WxG+zWKXd
wTIz/ZGXEb0HuD6aVIWvCK0umLZIx+jHhmkRkXpAyIJKx2I/vHa4tsF/rUU1Bn2z
CjuNZ71faZ+dijLzcLSPw1b3dMUK228FTcIVKl+K6Uf2Ds6BcH8Qv2FBrA+UYodT
8qieWcy27MIqacFzbYDMd4rhflEOibEY7pvNiFCvLjzcgSiae2WhUA0bmF7G1/qw
2MNDI/qYjSL5M7h8YhMflZySFh8pDRcEP/sl0+HcyKNGvKHpt7Y4PU9r+enEqe6n
00VT5tpImh9afGawKcVmTwCSNKtnEcywx+r3jWTVlvlVdOjHJS1NyqJ8Y/bNUlvV
At+57wJt/OlfTrqFMQ9IbGWKV4m7bJZiWFTuWYgrexpw8ovMh8LzPrkOWbm+iFhr
cLfT4Txr3C7o5imkQSZ7Ie8mnBzlL3eQkSlBOMWX56hYanZMzZw=
=NBpd
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #4
It contains one new LAN966 based board, namely pcb8309, a cleanup
on Makefile to sort alphabetically LAN966 entries and 2 cleanups
on bindings.
* tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
Link: https://lore.kernel.org/r/20220727075749.2445000-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Absolute path to other DT schema is preferred over relative one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220726115841.101249-4-krzysztof.kozlowski@linaro.org
Id and schema fields do not need quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220726115841.101249-3-krzysztof.kozlowski@linaro.org
This adds support for booting secondary cores, SPM, SMD-RPM and RPM
power-domain support for the MSM8909 platform.
It drops an unnecessary print in icc-bwmon, corrects SA8540P entries in
socinfo and a Kconfig build dependency for QCOM_RPMPD.
Lastly it continues to clean up up the Devicetree bindings for the
Qualcomm drivers.
-----BEGIN PGP SIGNATURE-----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=gLQ3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=TP2T
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
More Qualcomm driver changes for v5.20
This adds support for booting secondary cores, SPM, SMD-RPM and RPM
power-domain support for the MSM8909 platform.
It drops an unnecessary print in icc-bwmon, corrects SA8540P entries in
socinfo and a Kconfig build dependency for QCOM_RPMPD.
Lastly it continues to clean up up the Devicetree bindings for the
Qualcomm drivers.
* tag 'qcom-drivers-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
Link: https://lore.kernel.org/r/20220720230648.2113609-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document power-controller child of Qualcomm RPM over SMD to fix
dtbs_check warnings like:
msm8916-huawei-g7.dtb: rpm-requests: 'power-controller' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504131923.214367-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatible for qcom,sm8450-aoss-qmp with qcom,aoss-qmp as a
fallback. This fixes dtbs_check warnings like:
sm8450-hdk.dtb: power-controller@c300000: compatible:0: 'qcom,sm8450-aoss-qmp' is not one of
['qcom,sc7180-aoss-qmp', 'qcom,sc7280-aoss-qmp', 'qcom,sc8180x-aoss-qmp', 'qcom,sdm845-aoss-qmp',
'qcom,sm6350-aoss-qmp', 'qcom,sm8150-aoss-qmp', 'qcom,sm8250-aoss-qmp', 'qcom,sm8350-aoss-qmp']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504131923.214367-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The schema for "qcom,tcs-config" property can be a little bit simpler,
without the need of defining each item. Also move the description of
each part of "qcom,tcs-config" tupple to the tupple items description.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220426110757.80603-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Document the "qcom,msm8909-saw2-v3.0-cpu" compatible for the CPU
Subsystem Power Manager (SPM) on the MSM8909 SoC. This is necessary
for CPU idle since this is a fairly old 32-bit SoC without support
for PSCI.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-6-stephan.gerhold@kernkonzept.com
Document the "qcom,rpm-msm8909" compatible to describe the interface to
the Resource Power Manager (RPM) on the MSM8909 SoC.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-2-stephan.gerhold@kernkonzept.com
for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells"
properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
that it is documented within the BCMBCA Device Tree binding documents.
He updates the 47622 DTS to remove unnecessary PSCI properties, fix
the GIC nodes and some minor cosmetic changes. He finally adds support
for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26
Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing
whitespace between the property name and its value.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmLMUVcACgkQh9CWnEQH
BwT5ChAAxXxWgFr3dWrsmTqfgSrnVSQlDGbYqDEwsFPIx4s3yHURdxSrAHsPTowS
wDCQlKxstrkwhawXAVluCUEg8K3Juf4r+Qbb7EhoOU/eNu7TUcrVzQn0zok9jMe8
p1GBJ/uvX/Dm7Qlbfyv7Luw+VA7yNEqDfyyrK4fCVnsKhmFPJa5ZyHCspMlW1HNJ
q53TrSu3FjzUmCPWX8lk6JFwRCcTXTKlz/xJ9QqL4238aTPihdFTcgwVA3OiKYVA
L6ZPJik1AsyoV/Hfuci5FoYhPy5rvlDoI72OM4DRtTGl/gtbpeB1LnT7nv/O5/TS
+KRSJpaYadMtn4z0praVZiad0aM2jBVjZQGlpvB6BgjYqnwTWGTHA26Lk0r40lmJ
yzuhYXavB2R6CuNE4Z9RSeOzQrjWqdj0J4H2Xz1e9IvHLHUJ42uPfvafiMV0LAI3
EYPw7iuKmV0yKintlgYT4yivNx4+UrIWSHMev01D16Ldyxy0Gy6lOStBVpyaHMOb
AKlER0uzBlEU1h44ztEuUhnx4ZecB1zEVEB+IsEw9j/kgZxfWHHrbGE+1sTzKa6w
Fg76gx2KRkW1wzOUSizwjrCYrazBfvnN4GuGXLFx5hZbTQkmUODLbXaFmxnJty7s
3PaJQIck6NEGHKM7LfV47dvb3lLPts1fyOmn4Vv/P3vTN6MY9e4=
=h0fy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GDxE
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells"
properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
that it is documented within the BCMBCA Device Tree binding documents.
He updates the 47622 DTS to remove unnecessary PSCI properties, fix
the GIC nodes and some minor cosmetic changes. He finally adds support
for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26
Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing
whitespace between the property name and its value.
* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits)
ARM: dts: Add BCM63138 generic board dts
ARM: dts: update dts files for bcmbca SoC BCM63138
ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
dt-bindings: arm: add BCM63138 SoC
ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
ARM: dts: BCM5301X: Add DT for Meraki MR26
dt-bindings: ARM: add bindings for the Meraki MR26
dt-bindings: arm64: Add BCM6813 SoC
ARM: dts: Add DTS files for bcmbca SoC BCM63148
dt-bindings: arm: Add BCM63148 SoC
dt-bindings: arm64: Add BCM6856 SoC
dt-bindings: arm64: Add BCM63146 SoC
ARM: dts: broadcom: correct gpio-keys properties
ARM: dts: broadcom: align gpio-key node names with dtschema
ARM: dts: Add DTS files for bcmbca SoC BCM6756
dt-bindings: arm: Add BCM6756 SoC
...
Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
-----BEGIN PGP SIGNATURE-----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=AHeW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0Kp7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.20
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
* tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
soc: qcom: llcc: Fix syntax errors in comments
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
firmware: qcom_scm: Add bw voting support to the SCM interface
dt-bindings: firmware: qcom-scm: Add interconnects property
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
dt-bindings: firmware: scm: Add compatible for SDX65
dt-bindings: arm: qcom: switch maintainer to Bjorn
soc: qcom: rpmhpd: fix typos in comment
soc: qcom: correct kerneldoc
soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
firmware: qcom_scm-legacy: correct kerneldoc
dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
soc: qcom: apr: Drop redundant check in .remove()
firmware: qcom_scm: drop unexpected word "the"
soc: qcom: socinfo: Add an ID for sc7180P
Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Group devices like Chip ID or SoC information under "hwinfo" directory.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220705155038.454251-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
'smd-edge' property appears in multiple bindings, so split it into one
place which can be re-used. This reduces code duplication and adds
strict schema matching for smd-edge nodes (instead of just
"type:object").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-9-krzysztof.kozlowski@linaro.org
Update the PRUSS bindings for the PRUSSM instance present in
AM625 SoC.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602120613.2175-3-kishon@ti.com
Re-arrange "compatible" string in alphabetic order to decrease the
chance of conflicts.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602120613.2175-2-kishon@ti.com
ExynosAutov9 gained a reboot-mode node, so document the property to fix
warning:
exynosautov9-sadk.dtb: system-controller@10460000: 'reboot-mode' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220706160257.27579-3-krzysztof.kozlowski@linaro.org
Preferred coding for referencing other schemas is to use absolute path.
Quotes over path are also not needed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220706160257.27579-2-krzysztof.kozlowski@linaro.org
Add samsung,exynosautov9-usi dedicated compatible for representing USI
of Exynos Auto v9 SoC.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220701015226.32781-2-chanho61.park@samsung.com
The core schema already sets a 'ref' for properties ending with 'names'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-2-krzysztof.kozlowski@linaro.org
Add a new compatible string for BCM2711 and the option to provide a
third reg property for the board's new RPiVid ASB.
In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
of this driver so far. The old ASB is still be present with ISP and H264
bits but no V3D.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Anticipating the introduction of BCM2711, of which we'll need to support
its new RPiVid ASB, introduce reg-names into bcm2835-pm's binding. This
will help to have a consistent mapping between resources and their
meaning.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This converts the brcm,bcm2835-pm bindings from text to proper schema.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to allow modules with latency requirements such as MDP3
to set registers through CMDQ, add the relevant GCE property.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220610063424.7800-5-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In order to share the same hardware information with MDP3,
change the MUTEX dt-binding to the path "soc/mediatek".
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220610063424.7800-4-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mt8192 svs compatible/resets in dt-bindings.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-7-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Document the binding for enabling mtk svs on MediaTek SoC.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-2-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Renesas Product Register DT binding is not a top-level DT binding,
hence it does not belong under Documentation/devicetree/bindings/arm/.
Move it to Documentation/devicetree/bindings/soc/renesas/.
While at it, change the license from GPL-2.0 (only) to GPL-2.0-only OR
BSD-2-Clause, to match common practices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Simon Horman <horms@verge.net.au>
Link: https://lore.kernel.org/r/5f124fc332b4b866f5238ada7ac000f4639c88c3.1651495078.git.geert+renesas@glider.be
Add the dt-binding to support MT8186 devapc.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220504115501.3490-2-rex-bc.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Fixes for unevaluatedProperties warnings. These were missed to due to
a bug in dtschema which is now fixed. The changes involve either
adding missing properties or removing spurious properties from
examples.
- Update several Qualcomm binding maintainer email addresses
- Fix typo in imx8mp-media-blk-ctrl example
- Fix fixed string pattern in qcom,smd
- Correct the order of 'reg' entries in Xilinx PCI binding
-----BEGIN PGP SIGNATURE-----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=EhEb
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fixes for unevaluatedProperties warnings.
These were missed to due to a bug in dtschema which is now fixed. The
changes involve either adding missing properties or removing spurious
properties from examples.
- Update several Qualcomm binding maintainer email addresses
- Fix typo in imx8mp-media-blk-ctrl example
- Fix fixed string pattern in qcom,smd
- Correct the order of 'reg' entries in Xilinx PCI binding
* tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mtd: spi-nand: Add spi-peripheral-props.yaml reference
dt-bindings: memory-controllers: ingenic: Split out child node properties
dt-bindings: net/dsa: Add spi-peripheral-props.yaml references
dt-bindings: PCI: apple: Add missing 'power-domains' property
dt-bindings: Update Sibi Sankar's email address
dt-bindings: clock: Update my email address
dt-bindings: PCI: xilinx-cpm: Fix reg property order
dt-bindings: net: Fix unevaluatedProperties warnings in examples
dt-bindings: PCI: socionext,uniphier-pcie: Add missing child interrupt controller
dt-bindings: usb: snps,dwc3: Add missing 'dma-coherent' property
dt-bindings: soc: imx8mp-media-blk-ctrl: Fix DT example
dt-bindings: soc: qcom,smd: do not use pattern for simple rpm-requests string
This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request,
or that came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including
a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE.
-----BEGIN PGP SIGNATURE-----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=2qok
-----END PGP SIGNATURE-----
Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
The DT example incorrectly names the ISP power domain "isp1" instead of
"isp". This causes a validation failure:
Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.example.dtb: blk-ctl@32ec0000: power-domain-names:7: 'isp' was expected
From schema: Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
Fix it.
Fixes: 8b3dd27bfe ("dt-bindings: soc: Add i.MX8MP media block control DT bindings")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220510200543.13482-1-laurent.pinchart@ideasonboard.com
patternProperties should not be used for properties with a simple string
as name:
Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml: patternProperties:^(.*-edge|rpm)$:patternProperties:
'^rpm-requests$' should not be valid under {'pattern': '^\\^[a-zA-Z0-9,\\-._#]+\\$$'}
Fixes: 375eed5f51 ("dt-bindings: soc: qcom,smd: convert to dtschema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220524070408.39505-1-krzysztof.kozlowski@linaro.org
framework that simplifies a runtime PM call. Otherwise the majority of the diff
falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some
new hardware support and what comes along with that is quite a few lines of
data and some clk_ops code. Beyond the new hardware support we have the usual
pile of driver updates that add missing clks on already supported SoCs or fix
up problems like bad clk tree descriptions. It's nice to see that more drivers
are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already booted
for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings
-----BEGIN PGP SIGNATURE-----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=7lBA
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
There are 40 branches this time, adding a lot of new hardware
support, and cleanups. Krzysztof Kozlowski continues his treewide
cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L
general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for designing
custom SoCs, the support for now is for the Fixed Virtual Platform
emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used
in upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly
for 32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based
IOT board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch,
a Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKOp8cACgkQmmx57+YA
GNk33hAAn/mY+QDyj8sUwtY4AAVtut2QgyBm7NBWLgiYDQx52yBwP7rUxeKyDqZF
q6LK5z3NA7NN5REpfn6WKBEFo6wkzTzg4Gev/h+9hwLyozch8vl4etBfZGak4A7m
cLCONZdw4FMCQ10oLq+ib/WJeJv2W700307OkJ3dN73qdbWLRF1hoyG+uMTHuEqL
If755IR+EYhxYz8CfJhCYb2BcqhRq047n3sEqolZpFtz5oHUW2dADASgWpV+3yNc
ql8cH0f5OTKbFS1lM4k7cWbMW2vHWx7jZnXZDyMfy3EE5SOb4V/s9JFJSS1pAfPQ
OWuq194LT+SIXTTT3DQ+lSNcMhlkyeXQ0JQE1wAAp0vov4V8vHGvEGk0MCku5QHp
zKKONPfcn9aoWtsh4GaCvt0cP0m7lKyjxJvNSjBy2C9dVW8t4UlIVZr+V8hR2Ufp
SpCCzMbttrcUK6rHzQmWsR563mhfszzuzDfZi4RK2aFLJKhFi5hEQF2tDxLq8Y09
vIY/OkRpSwahgbiyj/zhKrJtnhFHh1m6wZJG+Sk9lTJikEhaRinriy0lgu08xssG
krBHPOVhNY11rqlzosBU39JOya1/J2iTxjo7ccNmGfO4MDanE+Cl41a5wSNjciw1
ihi2zAUBClGg0TnQ+HJylFPS3ZFyGEtbYH/d6td25DtwaaIsaxU=
=LsM7
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
These updates are for platform specific code in arch/arm/, mostly fixing
minor issues. The at91 platform gains support for better power
management on the lan966 platform and new firmware on the sama5
platform. The mediatek soc drivers in turn are enabled for the new
mt8195 SoC.
-----BEGIN PGP SIGNATURE-----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=Eoh1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup,
qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI
timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek
infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI,
rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek
touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC
LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use platform_get_irq()
and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls
-----BEGIN PGP SIGNATURE-----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=OUL3
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
Microchip/SMSC LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use
platform_get_irq() and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls"
* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
of/irq: fix typo in comment
dt-bindings: Fix properties without any type
Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
dt-bindings: timer: cdns,ttc: drop unneeded minItems
dt-bindings: mailbox: zynqmp_ipi: convert to yaml
dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
dt-bindings: net: add schema for ASIX USB Ethernet controllers
of/fdt: Ignore disabled memory nodes
dt-bindings: arm: fix typos in compatible
dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
dt-bindings: display: convert Arm Komeda to DT schema
dt-bindings: display: convert Arm Mali-DP to DT schema
dt-bindings: display: convert Arm HDLCD to DT schema
dt-bindings: display: convert PL110/PL111 to DT schema
dt-bindings: arm: convert vexpress-config to DT schema
dt-bindings: arm: convert vexpress-sysregs to DT schema
...
Add device tree bindings documentation for the Intel Hard
Processor System (HPS) Copy Engine.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
-----BEGIN PGP SIGNATURE-----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=/Dqp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rjVH
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: pdr: use static for servreg_* variables
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
soc: qcom: socinfo: Sort out 8974PRO names
dt-bindings: soc: qcom,smp2p: convert to dtschema
dt-bindings: qcom: geni-se: Update UART schema reference
dt-bindings: qcom: geni-se: Update I2C schema reference
dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
bus: add driver for initializing the SSC bus on (some) qcom SoCs
dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
dt-bindings: soc: qcom,smd: convert to dtschema
firmware: qcom_scm: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
soc: qcom: smem: validate fields of shared structures
soc: qcom: smem: map only partitions used by local HOST
...
Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3IvYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6lhwf7BpYDyiaYHBKQLXWWDZj1QanO6bjM
fMlxvVdggfeLW6ijerCb+wf2jNQY75lWRRny4x4WWP+sSVZ4u9SUJlxLrwo/aWYr
44KWWr4PkSMDm5j2bQyy8S9o01ZpxT/FOqqTC51PwgMx7yxB7+d1Z1txWwp5W0jB
Ps92O4bKRfvCCF7Mgjw3/FDu5iek6+9pHx5dQxQ1CWPuvVJos6M9Ktkv27x3oOvI
S4v6Y7v5m1WxSjUK2p09pIGP9AJrHhmRNJF3R/ZrXqUKAlpCQFK6DwZ9mY/rfcfj
tPoqCwj9/UmzG+GlBo8z7I2GQmF7vmwH6bqjP/T6SHOoxE9/fiqT2Swc5A==
=S4x7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2GwC
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.19:
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
* tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: fix semicolon.cocci warnings
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
soc: imx: imx8m-blk-ctrl: set power device name
soc: imx: gpcv2: add support for i.MX8MP power domains
soc: imx: gpcv2: add PGC control register indirection
Link: https://lore.kernel.org/r/20220508033843.2773685-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Renesas RZ/{G2L,V2L} System Controller (SYSC) DT binding is not
really a power-related DT binding, hence it does not belong under
Documentation/devicetree/bindings/power/.
Move it to Documentation/devicetree/bindings/soc/renesas/.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a47015888f99476a5206a556dce93503494d9a73.1651495078.git.geert+renesas@glider.be
The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level
peripheral providing access to the NoC and ensuring proper power
sequencing of the peripherals within the MEDIAMIX domain. Add DT
bindings for it.
There is already a driver for block controls of other SoCs in the i.MX8M
family, so these bindings will expand upon that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the DT binding for the HDMI blk-ctrl found on the i.MX8MP SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document that the firmware-name property can be used to indicate a file
contains I2C sequences for PMIC voltage scaling during deep sleep.
Based on previous work by Russ Dill.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[dfustini: split from driver patch and convert to json-schema]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220426200741.712842-2-dfustini@baylibre.com
Convert the fsl,layerscape-scfg binding to the new YAML format.
In the device trees, the device node always have a "syscon"
compatible, which wasn't mentioned in the previous binding.
Also added, compared to the original binding, is the
interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi
as well as the litte-endian and big-endian properties.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220427075338.1156449-5-michael@walle.cc
Convert the fsl,layerscape-dcfg binding to the new YAML format.
In the device trees, the device node always have a "syscon"
compatible, which wasn't mentioned in the previous binding.
One thing added here, compared to the original binding is the clock
controller subnode of the LS1028A SoC and its "simple-mfd" compatible as
used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the
little-endian and big-endian properties.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425140433.33936-1-michael@walle.cc
Convert the Qualcomm Shared Memory Point 2 Point bindings to DT Schema.
Changes against original bindings: enforce only specific names of child
nodes, instead of any names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411155528.502889-1-krzysztof.kozlowski@linaro.org
We now have geni based QUP UART controller individual binding, update
reference in parent schema and remove properties from common wrapper.
With removal of last child node schema, remove common properties of all
the controllers as they have become obsolete now.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404182938.29492-5-singh.kuldeep87k@gmail.com
We now have geni based QUP I2C controller binding in place as
dt-bindigs/i2c/qcom,i2c-geni-qcom.yaml similar to other controllers,
update reference in parent schema and while at it, also remove
properties defined for the controller from common wrapper.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404182938.29492-3-singh.kuldeep87k@gmail.com
Convert the Qualcomm RPMH RSC bindings to DT Schema.
Changes against original bindings:
1. Add qcom,tcs-offset as a property instead of one of reg (not used
that way).
2. Add limits to interrupts.
3. Add child nodes (bcm-voter, clock-controller, power-controller).
4. Extend the example with more complex one.
The device description and DTS examples were copied from existing
sources, so keep the license as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411085935.130072-4-krzysztof.kozlowski@linaro.org
Add compatible msm8936. msm8936 covers both msm8936 and msm8939.
The relevant driver already has the compat string but, we haven't
documented it.
Fixes: d6e52482f5 ("drivers: soc: Add MSM8936 SMD RPM compatible")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220418231857.3061053-1-bryan.odonoghue@linaro.org
Add documentation for the ti,set-io-isolation DT property on the wkup_m3_ipc
node which tells the wkup_m3_ipc driver to use the wkup_m3 to enable
IO Isolation during low power mode transitions on am43xx platforms.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[dfustini: convert to YAML, make DTS example that passes check]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220414192722.2978837-2-dfustini@baylibre.com
Convert the Qualcomm Shared Memory Point 2 Point bindings to DT Schema.
Changes against original bindings: enforce only specific names of child
nodes, instead of any names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220411155528.502889-1-krzysztof.kozlowski@linaro.org
Document Wakeup M3 IPC property that indicates a GPIO pin is connected
to the enable pin on DDR VTT regulator and can be toggled during low
power mode transitions.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[dfustini: converted to YAML, removed unnecessary "ti,needs-vtt-toggle"]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220409211215.2529387-2-dfustini@baylibre.com
After adding DT schema for the SPI controller, the Qualcomm GENI Serial
Engine QUP Wrapper Controller bindings can reference it directly for
full schema validation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220404064017.68634-2-krzysztof.kozlowski@linaro.org
Convert the Qualcomm RPM Clock Controller bindings to DT schema and
include it in parent's schema (SMD RPM).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401201035.189106-10-krzysztof.kozlowski@linaro.org
Convert the Qualcomm Shared Memory Driver bindings to DT Schema.
Changes against original bindings: enforce only specific names of child
nodes, instead of any names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401201035.189106-9-krzysztof.kozlowski@linaro.org
Kathiravan's email bounces (585: Recipient address rejected:
undeliverable address: No such user here) so switch maintainers to Andy
and Bjorn (as Qualcomm platform maintainers).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401202759.191560-1-krzysztof.kozlowski@linaro.org
Convert the Qualcomm General Serial Bus Interface (GSBI) to DT
Schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220405063451.12011-10-krzysztof.kozlowski@linaro.org
Convert the Qualcomm WCNSS bindings to DT Schema.
Changes against original bindings: fix qcom,smd-channels and
qcom,smem-states names (how they are used in DTS and driver), enforce
child node naming of bluetooth and wifi.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220405065752.27389-3-krzysztof.kozlowski@linaro.org
Convert the Qualcomm Shared Memory State Machine to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220405065512.26521-1-krzysztof.kozlowski@linaro.org
The rk3566 requires special handling for the dwc3-otg clock in order for
the port to function correctly.
Add a binding for the rk3566-pipe-grf so we can handle setup with the
grf driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220408151237.3165046-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Emails to Akash Asthana and Mukesh Savaliya bounce (550: Recipient
address rejected: User unknown in virtual alias table), so switch
maintainer to Bjorn (as active Qualcomm platform maintainer).
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220405063724.12850-1-krzysztof.kozlowski@linaro.org
After adding DT schema for Samsung SPI controller, the Samsung USI
bindings can reference it directly for proper schema validation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220324134106.103588-1-krzk@kernel.org
Remove trailing white-spaces and trailing blank lines (yamllint with
default options does not like them).
Suggested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220402192819.154691-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski's @canonical.com email stopped working, so switch to
generic @kernel.org account for all Devicetree bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org
Absolute paths in $ref should always begin with '/schemas'. The tools
mostly work with it omitted, but for correctness the path should be
everything except the hostname as that is taken from the schema's $id
value. This scheme is defined in the json-schema spec.
Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mukesh Savaliya <msavaliy@codeaurora.org>
Cc: Akash Asthana <akashast@codeaurora.org>
Cc: Bayi Cheng <bayi.cheng@mediatek.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: netdev@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@debian.org>
Link: https://lore.kernel.org/r/20220325215652.525383-1-robh@kernel.org
Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups and
new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list
(a common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
Note, the DTS updates will have a merge conflict in your tree. The
fixup should be simple, but if not, I can provide a merged tree if
needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYj7qpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRsQCcCryYifAvE2gHaNfI4B01JRWk7gQAoLNiUgvl
l+srEAXgIVueDhmDxy5P
=/Ppv
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the source
level syntax information. There's a bunch of schema fixes as a result
of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename
or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass messages
also now print by default at PR_INFO level to help test automation.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmI8s64QHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhwx3tD/4j56NE+aLkL636+I8tGFm3r+r6uLLT4SWh
zDuiX3MP9OKfhJw43TjjURLwX5adBnG3nn505IXcAeiMRgEiciOpSa12w0mXyjMX
QgVOcoaI3H2GBMEddJRo1PLTM/K5sYzZxAKLB827xoOk4mGNA0ZBAHvlB3W+yLE5
CE5yTaFoL4EMXuhWMtMrMlG1PQrbO3FpQ2DHBKrpxHPJmnHLk3c0YtMSTHGQnWbN
AxT3S6RSsOLwLzZAXi2AlswqY82n5KtUf/RBrYi8rdr/xnIsCfMeXxafkP2Hyxkq
L9RfKVn05c0LRtO1Eh8kYr+lmYmcWz/SIdJZXzpviIgE9MJapCAk0blBZ4S/FH0B
EVGB1JkwCZFck6DBmkNJxAwR0iQOGWkJIkn6iBPNF0dHp58eE6adaXjhFH3uBEHk
dXFaxPlvZ3P/Q2I/vmQ//m5tZMyjeCY2BlVYpkUJMOFfN26MIGHUmUlLnovLDqu4
lYgZG4V244uYzALLbURpbp+5dlPH/PL2gxvJJNqTS+/hXktQx1XnML4wD+xfJ4nT
OY5DD7Z+KGBrdsMtxkFtIFvKD63E2gtAR5RZO0J/txlzhW7Wg6fJbhJZeRFhZKmN
GAfud2s6rliyygByBL4ea50DSLLQpc/9HZtFmZ3NTILM6NbUR74sHt+1EZ1hee+M
LaNsSscHuQ==
=g1li
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
* Support for Sv57-based virtual memory.
* Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
* An improved memmove() implementation.
* Support for the new Ssconfpmf and SBI PMU extensions, which allows for
a much more useful perf implementation on RISC-V systems.
* Support for restartable sequences.
-----BEGIN PGP SIGNATURE-----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=Omc6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for Sv57-based virtual memory.
- Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
- An improved memmove() implementation.
- Support for the new Ssconfpmf and SBI PMU extensions, which allows
for a much more useful perf implementation on RISC-V systems.
- Support for restartable sequences.
* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
rseq/selftests: Add support for RISC-V
RISC-V: Add support for restartable sequence
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
RISC-V: Improve /proc/cpuinfo output for ISA extensions
RISC-V: Do no continue isa string parsing without correct XLEN
RISC-V: Implement multi-letter ISA extension probing framework
RISC-V: Extract multi-letter extension names from "riscv, isa"
RISC-V: Minimal parser for "riscv, isa" strings
RISC-V: Correctly print supported extensions
riscv: Fixed misaligned memory access. Fixed pointer comparison.
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
...
After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
The services actually provided by the system controller are not
documented so add some words about what the system controller can
actually do. Add a link to the oneline documentation with the specific
details of each individual service.
Also, drop the unneeded label from the example.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The Polarfire SoC is currently using two different compatible string
prefixes. Fix this by changing "polarfire-soc-*" strings to "mpfs-*" in
its system controller in order to match the compatible string used in
the soc binding and device tree
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Another pass at removing unnecessary use of 'allOf' with a '$ref'.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228213802.1639658-1-robh@kernel.org
This adds dt-binding documentation of pwrap for Mediatek MT8186
SoCs Platform.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Link: https://lore.kernel.org/r/20220207083034.15327-3-johnson.wang@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds the binding for the HSIO blk-ctrl on the i.MX8MP SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Explicitly reference the dtschema for USI children implementing specific
serial protocol (I2C, SPI, UART). The SPI schema is not yet accepted,
so it will be provided later.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220211164716.120880-1-krzysztof.kozlowski@canonical.com
This adds the DT binding for the i.MX8MQ VPU blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. Many schemas for
phandle-array properties aren't clear in the schema which case applies
though the description usually describes it.
The array of phandles case boils down to needing:
items:
maxItems: 1
The phandle plus args cases should typically take this form:
items:
- items:
- description: A phandle
- description: 1st arg cell
- description: 2nd arg cell
With this change, some examples need updating so that the bracketing of
property values matches the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015038.2433585-1-robh@kernel.org
Add the documentation for the rk3568-usb2phy-grf node, which is separate
from the usb2phy node on this chip.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215210252.120923-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms.
All the newly supported SoCs belong into existing families
this time:
- Qualcomm gets support for two newly announced platforms, both
of which can now work in production environments: the SDX65
5G modem that can run a minimal Linux on its Cortex-A7 core,
and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3
family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread
i.MX8 series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
we have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
while MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two
new SoCs, plus a number of Chromebook variants and phones based
on the Snapdragon 7c, 845 and 888 SoCs, including various
Sony Xperia devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit
chips out of the box, including a number of ASUS Transformer
tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top
box based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908.
-----BEGIN PGP SIGNATURE-----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=IF3G
-----END PGP SIGNATURE-----
Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
-----BEGIN PGP SIGNATURE-----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=cSDK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=MfG5
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
ARM: dts: NSP: Rename SATA unit name
ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
ARM: dts: Cygnus: Fixed iProc PCIe controller properties
dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
ARM: dts: BCM5301X: update CRU block description
ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
This introduces RPM power-domain support for the SM8450, SM6125 and
QCM2290 platforms. It them clean up the platform-based naming of the
resources definitions throughout the RPMh PD driver.
The last-level cache controller driver gains SM8350 support.
The RPM sleep stats driver gains support for several older systems that
had a slightly different memory layout for this information.
The socinfo gains SM8450, SM6350 and SM7227 definitions.
In addition to the DeviceTree binding updates related to these changes
new compatibles was added to describe the SM8450 and the Kryo 780 CPU.
Lastly a few typo and style fixes are introduced.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmHBUg4bHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FObUQAOCTBSbL/US0wCCUEHPq
MScjFtPDAV88bJi9uRzi5lalwPd/3yPZu+XLcCV/CjRj6nlGAbua2EcogvMsM1Lj
rgHZopKnnDOHEFII2ZZ3lyJN4EntvSGHtnm/i2Jd7n3nB52zBkuRpgn3mi32QWoL
QmGECClAPFBlQi9P33yHDZ/XC8ZK1y982G+Pb8SD6guxmtGxXCm4SaZ4qwVya53s
euBl+nT/snARPEwaqRoGIsvs+fH2BcoJbug19MLQ+3Q4K9ycxQkWalzcMsLM/EjT
H1JGjoaHbTpNhyMmKDqN2jS0CkvoLiYOIvhAbqw6l2HluRkn8QhcDOJJ9RHl2oB/
EqYkK457F7smA0Z9vViuaEZJWfyPNt0z2c7zcpf73Iuk8cBM+48MUQ1UOwyvQh3c
8AeyyAkgyYBWv58h5rLDS2fqD+tWx4hz6tqxyYojsxYjQkyWRDU6540tGSDeVAt+
SUQ9qFXWyG7R5Z3GBVHi7ztXnkl6vYZUF05fhZrkpw9YrGlmu3wK/3Rcg9ZIECOg
Q0UA/GQsqQtCqmzkRQsur/ljEbCrmtiB6JvG+7cnQIWPwcN/4Ho3wyfXvtzNvNki
dMIpd+7NKkTaj1HUaH5qEnyO4szUpMoFfOrtqzlucH5dGG6fppY3svVWzuxLcbDy
8+b+/aDuWa7HUXpBbPaK7H7U
=ovup
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NlpZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.17
This introduces RPM power-domain support for the SM8450, SM6125 and
QCM2290 platforms. It them clean up the platform-based naming of the
resources definitions throughout the RPMh PD driver.
The last-level cache controller driver gains SM8350 support.
The RPM sleep stats driver gains support for several older systems that
had a slightly different memory layout for this information.
The socinfo gains SM8450, SM6350 and SM7227 definitions.
In addition to the DeviceTree binding updates related to these changes
new compatibles was added to describe the SM8450 and the Kryo 780 CPU.
Lastly a few typo and style fixes are introduced.
* tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document additional compatibles that can be used similarly to qcom,rpm-stats
for older RPM firmware versions that have the sleep stats at a fixed offset
rather than a dynamic one. The exact offset might vary depending on the SoC
so use SoC-specific compatible names to avoid confusion.
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211119213953.31970-2-stephan@gerhold.net
This converts the VCHIQ bindings to YAML format.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215094448.280796-1-nsaenz@kernel.org
Recently added Samsung Exynos USI driver devicetree bindings were added
under ../bindings/soc/samsung/exynos-usi.yaml, so move there also two
other bindings for Exynos SoC drivers: the PMU and ChipID.
Update Samsung Exynos MAINTAINERS entry to include this new path.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211213112057.16709-1-krzysztof.kozlowski@canonical.com
Add the DT binding for the i.MX8MN DISP blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that HSI2C binding [1] is converted to dt-schema format, it reveals
incorrect HSI2C clocks order in USI binding example:
.../exynos-usi.example.dt.yaml:
i2c@13820000: clock-names:0: 'hsi2c' was expected
From schema: .../i2c-exynos5.yaml
.../exynos-usi.example.dt.yaml:
i2c@13820000: clock-names:1: 'hsi2c_pclk' was expected
From schema: .../i2c-exynos5.yaml
Change HSI2C clock order in USI binding example to satisfy HSI2C binding
requirements and fix above warnings.
[1] Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211214170924.27998-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add constants for choosing USIv2 configuration mode in device tree.
Those are further used in USI driver to figure out which value to write
into SW_CONF register. Also document USIv2 IP-core bindings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211204195757.8600-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
This is a rather large update for the ARM devicetree files, after a few
quieter releases, with 775 total commits and 47 branches pulled into
this one. There are 5 new SoC types plus some minor variations, and
a total of 60 new machines, so I'm limiting the summary to the main
noteworthy items:
- Apple M1 gain support for PCI and pinctrl, getting a bit
closer to a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as
well as SM7225, 11 new smartphones, and three additional
Chromebooks, and improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version
of their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a
number of improvements for the recently added SAMA7 family.
The LAN966 SoC that was added in the platform code does not
have dts files yet. Two board files are added for the older
at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600
as BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new
development boards using RK3328/RK3399/RK3566, and one
Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the
new MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based
ebook readers, and three additional development boards, which
is notably less than their usual additions, but they also gain
improvements to their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with
a reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many
updates for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi
boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for
more hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub
home automation controllers, along with changes to other
machines
- Rob Herring continues his work on fixing dtc warnings all over
the tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc
-----BEGIN PGP SIGNATURE-----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=jp4P
-----END PGP SIGNATURE-----
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest. Note that a few changes in the
unusual places like arch/sh are included, which are a part of ASoC DAI
format cleanups.
ALSA core:
- Continued memallloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU
-----BEGIN PGP SIGNATURE-----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=UBNY
-----END PGP SIGNATURE-----
Merge tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
Document the qcom,msm8916-saw2-v3.0-cpu compatible that is needed
for cpuidle for MSM8916 on some devices with signed firmware which
is only capable of booting ARM32 kernels without PSCI.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-10-stephan@gerhold.net
Add device binding documentation for Qualcomm Technologies, Inc. (QTI)
Sleep stats driver. The driver is used for displaying Sleep statistic maintained
by Always On Processor or Resource Power Manager.
Cc: devicetree@vger.kernel.org
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634107104-22197-2-git-send-email-mkshah@codeaurora.org
In the olden days the Qualcomm shared memory (SMEM) region consisted of
multiple chunks of memory, so SMEM was described as a standalone node
with references to its various memory regions.
But practically all modern Qualcomm platforms has a single reserved memory
region used for SMEM. So rather than having to use two nodes to describe
the one SMEM region, update the binding to allow the reserved-memory
region alone to describe SMEM.
The olden format is preserved as valid, as this is widely used already.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20210930182111.57353-3-bjorn.andersson@linaro.org
This adds the DT binding for the i.MX8MM VPU blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the DT binding for the i.MX8MM VPU blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add dt-bindings for Aspeed UART routing controller.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210927023053.6728-4-chiawei_wang@aspeedtech.com
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.
GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.
This support is added using existing APR driver to reuse most of
the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-5-srinivas.kandagatla@linaro.org
replace usage of qcom,apr-domain property with qcom,domain property so
that bindings and driver can be reused.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-3-srinivas.kandagatla@linaro.org
Convert APR bindings to yaml format so that we could add new bindings support.
All the dsp services bindings are now part of apr bindings instead
of adding them to audio bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-2-srinivas.kandagatla@linaro.org
The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the load
power-domain and replace them with generic qmp_send interface instead.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-2-git-send-email-sibis@codeaurora.org
The driver was updated to add SAW2 v4.1 support for new SoCs: document
the new compatibles.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-6-angelogioacchino.delregno@somainline.org
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmEa29wbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FFnMP/A2Od7JYhdjH7sfc3i3B
0zws88lT7XTo9KSMpLFrQg1Qzp3ELDMfVhS2CpsekZn1g7s6RGnbQrh2Mac9Yh4z
+7e4YLhoMxEkdbEVvbVRIX4parFWD/KxUdkyXM8gKZntJzOFl6VY5V8aKi+7IO+/
CdWHvELDVXMe2LkBd3lKE1AlS2MjkohXpFKgRwkY4r2nVXwqYTdkfJvXdGdhECGr
ld4ZIvIR6ERLmVpGvTxdU5W0z2xsLTbPYDPSv6mPkWqDYSOyXV3zABV1fSkH28ot
wIoesHyI3vL4/LNIlHn+tcWj1Ou8hSzxZmxfq7cdKbkfwPLCWE5D8+HEO4kmbFiF
5Dds+oxvKSFpf/wppK7bUSEd9Q+dKsrFt2mdWy/sYRe1EaEv5sFBgE0rV3+c6ykL
tptUEFlaB2si7PKSpKje8czHn4Akuc6BwT6xovZZ72K8CNz9D71etSkoNLLXa54d
bJibw2eNTT1EOACC/FPBO9AS11Icm6wszn/dcaSwaSPGQ6cR3lvAwHqzDFMGHp+x
L+iojgnZoHykFhQjGuGrI3yTHOpp0MCNxRoN7DlFwm7KLKVHqeqg+xHXtV9sJer8
iAhY/uepLRxc1oC5Z+Ejx1gABmKycXtzKQ9ecwTclrk66ampWQBlv5+Bxd5w/hux
ZR96mJPmpk1WKOX3FAgdeaaP
=88qN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dS58
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add binding for the RK3568 along a SoC-specific description of
voltage supplies.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
[add soc-specific section]
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210805120107.27007-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Update the PRUSS schema file to include the dma-coherent property
that indicates the coherency of the IP. The PRUSS IPs on 66AK2G
SoCs do use this property.
The new added dma-coherent property is a required property _only_
for 66AK2G SoCs and is not required/applicable for other SoCs, so
the binding is backward compatible for other SoCs. This update is
being done before the corresponding dts nodes can be added for 66AK2G
SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The K3 AM64x SoCs also have the Gigabit Ethernet capable PRU-ICSS IP
that is present on existing K3 AM65x and J721E SoCs (ICSSG). The IP
is similar to the ones used on K3 J721E or AM65x SR2.0 SoCs.
Update the PRUSS bindings for these ICSSG instances.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
