The child nodes 'pinctrl', 'usb-hub', and 'clock-controller' in the
socionext,uniphier-soc-glue binding are not patterns, but the full node
name, so move them to 'properties'. As patterns, they were missing start
and end anchors so any prefix or suffix was allowed.
Fixes: 0611adff8b ("dt-bindings: soc: socionext: Add UniPhier SoC-glue logic")
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230120020339.3223112-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add DT binding schema for components belonging to the platform-specific
AHCI glue layer implemented in UniPhier SoCs.
This AHCI glue layer works as a sideband logic for the host controller,
including core reset, PHYs, and some signals to the controller.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-18-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.
This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-17-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the ADAMV block implemented on Socionext
Uniphier SoCs.
The ADAMV block is analog signal amplifier that is a part of the external
video and audio I/O system. This block is implemented on LD11 and LD20,
and this is defined for controlling audio I/O reset only.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-16-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the SD interface block implemented on
Socionext Uniphier SoCs.
This SD interface block is attached outside SDHC, and has some SD related
functions such as clock control, reset control, mode switch, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-15-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the media I/O block implemented on
Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4,
and LD11 SoCs.
Media I/O block implemented on Socionext UniPhier SoCs is an integrated
component of the stream type peripherals including SD, USB2.0, eMMC,
and MIO-DMAC.
Media I/O block has a common logic to control the component.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-14-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the peripheral block implemented on
Socionext Uniphier SoCs.
Peripheral block implemented on Socionext UniPhier SoCs is an integrated
component of the peripherals including UART, I2C/FI2C, and SCSSI.
Peripheral block has some function logics to control the component.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-13-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the SoC-glue logic debug part
implemented on Socionext Uniphier SoCs.
This SoC-glue logic debug part is a set of miscellaneous function
registers handling signals for specific devices outside system
components, and also has multiple functions such as efuse, debug unit,
several monitors for specific SoC, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-12-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the SoC-glue logic implemented on
Socionext Uniphier SoCs.
This SoC-glue logic is a set of miscellaneous function registers
handling signals for specific devices outside system components,
and also has multiple functions such as I/O pinmux, usb-phy, debug,
clock-mux for a specific SoC, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-11-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree binding schema for the system controller implemented on
Socionext Uniphier SoCs.
This system controller has multiple functions such as clock control,
reset control, internal watchdog timer, thermal management, and so on.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213082449.2721-10-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
