The binding reference common cdns-pcie-host.yaml, which already defines
msi-parent and has a reference to pci-bus.yaml schema. Drop redundant
pieces here to make it a bit smaller.
Link: https://lore.kernel.org/linux-pci/20240413151617.35630-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
This adds the missing num-viewport, phys and phy-name properties to the
schema. Based on driver code, num-viewport is required for the root
complex, phys are optional. Their number corresponds to the number of
lanes. The AM65x supports up to 2 lanes.
Link: https://lore.kernel.org/linux-pci/8032b018-c870-403a-9dd9-63440de1da07@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
The first entry in the 'oneOf' schema doesn't work because the top
level schema requires exactly 8 interrupt entries. The 2nd entry is just
redundant with the top level. Since 1 entry appears to have been a
mistake, let's just drop the entire 'oneOf' rather than reworking the
top-level to allow 1 entry.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240417200431.3173953-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Increase the number of items in the ranges property to allow up to 3
ranges. For example a prefetchable range, a non-prefetchable range
and an IO range, depending on configuration.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240327-debunk-perky-f5514ca332be@spud
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The yamllint quoted-strings check wasn't checking keys for quotes, but
support for checking keys was added in 1.34 release. Fix all the errors
found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240426202239.2837516-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
TI's J722S SoC has one instance of a Gen3 Single-Lane PCIe controller.
The controller on J722S SoC is similar to the one present on TI's AM64
SoC, with the difference being that the controller on AM64 SoC supports
up to Gen2 link speed while the one on J722S SoC supports Gen3 link speed.
Update the bindings with a new compatible for J722S SoC.
Technical Reference Manual of J722S SoC: https://www.ti.com/lit/zip/sprujb3
Link: https://lore.kernel.org/linux-pci/20240124122936.816142-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Add the device-id of 0xb012 for the PCIe controller on the J784S4 SoC as
described in the CTRL_MMR_PCI_DEVICE_ID register's PCI_DEVICE_ID_DEVICE_ID
field. The Register descriptions and the Technical Reference Manual for
J784S4 SoC can be found at: https://www.ti.com/lit/zip/spruj52
Link: https://lore.kernel.org/linux-pci/20240401110951.3816291-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate
files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350,
SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski)
- Allow 'required-opps' DT property for SoCs that require a minimum
performance level for the power domain (Johan Hovold)
- Remove requirement for 'msi-map-mask' DT property since it depends on how
MSIs are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because their PHY
configuration isn't tuned for L0s, which results in many Correctable
Errors (Johan Hovold)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add DT binding and driver support for X1E80100 (Abel Vesa)
* pci/controller/qcom:
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema
dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8180x: Move SC8180X to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema
Add dedicated schema for the PCIe controllers found on X1E80100.
Link: https://lore.kernel.org/linux-pci/20240301-x1e80100-pci-v4-1-7ab7e281d647@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Whether the 'msi-map-mask' property is needed or not depends on how the
MSI interrupts are mapped and it should therefore not be described as
required.
Note that the current schema fails to detect omissions of the mask
property if the internal MSI controller properties are also present.
Link: https://lore.kernel.org/r/20240306095651.4551-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Some Qualcomm SoCs require a minimum performance level for the power
domain so add 'required-opps' to the binding.
Link: https://lore.kernel.org/r/20240306095651.4551-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add i.MX95 PCIe "fsl,imx95-pcie" compatible string and
"atu" and "app" to reg-names.
Link: https://lore.kernel.org/r/20240220161924.3871774-10-Frank.Li@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
snps,dw-pcie.yaml already have reg and reg-name information, there is
no need to duplicate it here.
Add 'if' check for existing compatible string to restrict reg and reg-names,
in preparation for adding a add new compatible string with difference reg-names
sets.
Link: https://lore.kernel.org/r/20240220161924.3871774-9-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The bindings referencing this file already define these constraints for
each of the variants, so the if not: then: is redundant.
Link: https://lore.kernel.org/r/20240220161924.3871774-8-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SA8775p PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-3-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC7280 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting exactly one MSI interrupt, instead of eight, because I
could not find interrupt details for this model and current DTS uses
one interrupt.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-2-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC8180X PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-1-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC8280XP compatible PCIe devices from qcom,pcie.yaml binding to a
dedicated file to make reviewing easier.
This creates equivalent schema file, except missing required compatible
which is actually redundant.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-6-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8350 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-5-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8150 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-4-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8250 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-3-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-2-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The qcom,pcie.yaml binding file containing all possible Qualcomm SoC
PCIe root complexes gets quite complicated with numerous if:then:
conditions customizing clocks, interrupts, regs and resets. Adding and
reviewing new devices is difficult, so simplify it by having shared
common binding and file with only one group of compatible devices:
1. Copy all common qcom,pcie.yaml properties (so everything except
supplies) to a new shared qcom,pcie-common.yaml schema.
2. Move SM8550 PCIe compatible devices to dedicated binding file.
This creates equivalent SM8550 schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-1-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ri0M
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
- Replace of_device.h with explicit of.h include to untangle header usage
(Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators
on KingFisher (Wolfram Sang)
* pci/controller/rcar:
PCI: rcar-host: Add support for optional regulators
dt-bindings: PCI: rcar-pci-host: Add optional regulators
PCI: rcar-gen4: Replace of_device.h with explicit of.h include
- Add j721e DT and driver support for 'num-lanes' for devices that support
x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to
those TI SoC parts (Peter Robinson)
* pci/controller/cadence:
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI: j721e: Add PCIe 4x lane selection support
PCI: j721e: Add per platform maximum lane settings
dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings
dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
requires the driver to deliberately place the RC HW one of three CLKREQ#
modes. The "brcm,clkreq-mode" property allows the user to override the
default setting. If this property is omitted, the default mode shall be
"default".
Link: https://lore.kernel.org/linux-pci/20231113185607.1756-2-james.quinlan@broadcom.com
Tested-by: Cyril Brulebois <cyril@debamax.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Document the PCIe Controller on the SM8650 platform by using the
SM8550 bindings as a fallback.
Link: https://lore.kernel.org/linux-pci/20231128-topic-sm8650-upstream-bindings-pcie-v2-1-b72e2d13bcf1@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
On some boards the 100MHz PCIe reference clock to both controller and
devices is controllable. Add that clock to the list of clocks.
The clock is optional, so the minItems stays the same.
Link: https://lore.kernel.org/linux-pci/20231206145041.667900-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There is no "resets-names" property, but "reset-names".
Fixes: 075a9d5593 ("dt-bindings: PCI: qcom: Convert to YAML")
Link: https://lore.kernel.org/linux-pci/20231111142006.51883-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
PCI node in Qualcomm SM8150 should have exactly 8 clocks, including the
ref clock.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20231208105155.36097-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
PCI node in Qualcomm SC8180x DTS has 8 clocks:
sc8180x-primus.dtb: pci@1c00000: 'oneOf' conditional failed, one must be fixed:
['pipe', 'aux', 'cfg', 'bus_master', 'bus_slave', 'slave_q2a', 'ref', 'tbu'] is too short
Link: https://lore.kernel.org/linux-pci/20231208105155.36097-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
The PCIe controller on SDX55 has five entries in its iommu-map, MSM8998
has one and SDM845 has sixteen, so allow wider number of items to fix
dtbs_check warnings like:
qcom-sdx55-mtp.dtb: pcie@1c00000: iommu-map: [[0, 21, 512, 1], [256, 21, 513, 1],
[512, 21, 514, 1], [768, 21, 515, 1], [1024, 21, 516, 1]] is too long
Link: https://lore.kernel.org/linux-pci/20231208105155.36097-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Support regulators found on the KingFisher board for miniPCIe (1.5 and
3.3v). For completeness, describe a 12v regulator while we are here.
Link: https://lore.kernel.org/linux-pci/20231105092908.3792-2-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add definition for j784s4-pci-ep and j784s4-pci-host devices along with
schema checks for num-lanes.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-3-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add num-lanes schema checks based on compatible string on available lanes
for that platform.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-2-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231124092121.16866-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=G//C
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm
and xilinx-xdma (Thippeswamy Havalige)
- Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige)
* pci/controller/xilinx-xdma:
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
- Drop xilinx-nwl updates of bridge bus number fields, since PCI core
already does that (Thippeswamy Havalige)
- Update xilinx-nwl driver and ECAM size in devicetree example to allow up
to 256 buses (Thippeswamy Havalige)
* pci/controller/xilinx-ecam:
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
Update ECAM size in the devicetree example to allow for the discovery of
up to 256 buses.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231016051102.1180432-3-thippeswamy.havalige@amd.com
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d09 ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iFFM
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn
Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()
Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state
Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs
Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core
VGA:
- Simplify and clean up typos in VGA arbiter
Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use
Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties
Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it
Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload
Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset
Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled
Marvell MVEBU PCIe controller driver:
- Remove unused busn member
Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them
Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled
NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors
Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support
Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits
SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts
Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off
MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices
Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"
* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...
Some platforms may not boot if a device driver doesn't
initialize the interconnect path. Mostly it is handled
by the bootloader but we have starting to see cases
where bootloader simply ignores them.
Add the "pcie-mem" & "cpu-pcie" interconnect path as a required
property to the bindings.
Link: https://lore.kernel.org/linux-pci/1689751218-24492-2-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Commit c0aba9f328 ("dt-bindings: PCI: qcom: Add SDX65 SoC") adding
SDX65 was never tested and is clearly bogus. The qcom,sdx65-pcie-ep
compatible is followed by a fallback in DTS, and there is no driver
matched by this compatible. Driver matches by its fallback
qcom,sdx55-pcie-ep. This also fixes dtbs_check warnings like:
qcom-sdx65-mtp.dtb: pcie-ep@1c00000: compatible: ['qcom,sdx65-pcie-ep', 'qcom,sdx55-pcie-ep'] is too long
[kwilczynski: commit log]
Fixes: c0aba9f328 ("dt-bindings: PCI: qcom: Add SDX65 SoC")
Link: https://lore.kernel.org/linux-pci/20230827085351.21932-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Rockchip RK356x and RK3588 handle legacy interrupts via a ganged
interrupts. The RK356x DT implements this via a sub-node named
"legacy-interrupt-controller", just like a couple of other PCIe
implementations. This adds proper documentation for this and updates
the example to avoid regressions.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-5-sebastian.reichel@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
The RK356x (and RK3588) have 5 ganged interrupts. For example the
"legacy" interrupt combines "inta/intb/intc/intd" with a register
providing the details, which specific interrupt triggered. The
interrupts from the second level are part of the Synopsys DW PCIe
System Information Interface (SII). Some of them are listed in the
Interrupt Signals section, the others are mostly common SII output
signals. The grouping and the ganged interrupt controllers are
specific to the Rockchip implementation.
Currently the binding is not specifying these interrupts resulting
in a bunch of errors for all rk356x/rk3588 boards using PCIe.
Fix this by specifying the interrupts and add them to the example
to prevent regressions.
This changes the reference from snps,dw-pcie.yaml to
snps,dw-pcie-common.yaml, since the interrupts are vendor
specific and should not be listed in the generic file. The
only other bit from the generic binding are the reg-names,
which are overwritten by this binding.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-3-sebastian.reichel@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmSdtQYUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxp7A/+KmoBOm9ytiM2HPiq6pmHiJ9zF/DP
0jvKqDlc0BkmCyRw+/woxA5ZQgDnIYXxxt31toeSu+n31p6AR4wZ14Q5HBahABMw
O/NUXmLAhYaczcp8hK4lS4Opz65+MaDHomu5fNuD7j7CagIwu20MegSEoyo35YC1
nDRN0IVYRRy/58wW509deQi/3U04TuC3kflc/iBToa/34g77L9ESoxpsZuAzo7wI
nc9DF28H6PkuOtnp26iVufqkeYD3wfE5VAtaIZhyO+/WkhcTTUU5JB2hgFSACr0G
qJTofncvGQrRYTNS7aIYPVrtTZpSMmPS08tgZc+iDkTr8iKth1jcPf3YHLpenQzx
2B197BUOLENOiWJFPIAe2TAgoGYYBgKhnnwcPHCHoinvVLTO82wUUW5qfn/GckgY
WNYmS4PofkjlbJH3JdyHdH+vsL0VRzAmkhH+k6F+V02T78Lk+QdXKegLbr5yzRwh
YF/GjX0JYjnONQeL1LQQ/4hfiA1VzmoXbHvXc0XJew6d/RYMon5G5xBAAZ8tnUHC
PX6WMd/CG8RBxFv7IsPh6hTGKEXw4/1ElynPVP/ZEBGVelHda4Sm4G5nJ6/r2cwK
VICfsSb9Nw76STGHpVeQB2O2Y/yZ1xIwWRiAsCndsYOlnGi+knRVxH5UH/1aQPOE
N3DsyT0s/sZaJvc=
=xpTd
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
The PCIe 2.0 controllers on RK3588 need one additional clock,
one additional reset line and one for ranges entry.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230616170022.76107-4-sebastian.reichel@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
- Remove writes to unused registers (Rick Wertenbroek)
- Write endpoint Device ID using correct register (Rick Wertenbroek)
- Assert PCI Configuration Enable bit after probe so endpoint responds
instead of generating Request Retry Status messages (Rick Wertenbroek)
- Poll waiting for PHY PLLs to lock (Rick Wertenbroek)
- Update RK3399 example DT binding to be valid (Rick Wertenbroek)
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message (Rick Wertenbroek)
- Use multiple windows to avoid address translation conflicts (Rick
Wertenbroek)
- Use u32 (not u16) when accessing 32-bit registers (Rick Wertenbroek)
- Hide MSI-X Capability, since RK3399 can't generate MSI-X (Rick
Wertenbroek)
- Set endpoint controller required alignment to 256 (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip: Set address alignment for endpoint mode
PCI: rockchip: Don't advertise MSI-X in PCIe capabilities
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Fix window mapping and address translation for endpoint
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
dt-bindings: PCI: Update the RK3399 example to a valid one
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Remove writes to unused registers
Update the example in the documentation to a valid example.
Address for mem-base was invalid, it pointed to address
0x8000'0000 which is the upper region of the DDR which
is not necessarily populated depending on the board.
This address should point to the base of the memory
window region of the controller which is 0xfa00'0000.
Add missing pinctrl.
Link: https://lore.kernel.org/r/20230418074700.1083505-7-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Various small fixes and cleanups to be aligned with the latest dt-schema.
Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIHGHgAKCRDKSWXLKUoM
IQW2AJ0eRZ5g7SYEg1y/zir6/j5s4RyaiACeO9EQJQ8nKkez73w4uoTBdmmOmlY=
=R8F0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jqDa
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/dt
arm64: ZynqMP DT changes for v6.5
Various small fixes and cleanups to be aligned with the latest dt-schema.
Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings
* tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits)
dt-bindings: usb: xilinx: Replace Manish by Piyush
dt-bindings: xilinx: Remove Rajan, Jolly and Manish
arm64: zynqmp: Used fixed-partitions for QSPI in k26
arm64: zynqmp: Add pmu interrupt-affinity
arm64: zynqmp: Set qspi tx-buswidth to 4
arm64: zynqmp: Fix usb node drive strength and slew rate
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Switch to amd.com emails
arm64: zynqmp: Convert kv260-revA overlay to ASCII text
dt-bindings: xilinx: Switch xilinx.com emails to amd.com
arm64: xilinx: Use zynqmp prefix for SOM dt overlays
arm64: zynqmp: Add phase tags marking
arm64: zynqmp: Describe bus-width for SD card on KV260
arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
arm64: zynqmp: Enable DP driver for SOMs
arm64: zynqmp: Setup clock for DP and DPDMA
arm64: zynqmp: Switch to ethernet-phy-id in kv260
arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
arm64: zynqmp: Add pinctrl emmc description to SM-K26
arm64: zynqmp: Add gpio labels for modepin gpio
...
Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f5b2bd1e78407e4128fc8f0b5874ba723e710a88.1684245058.git.michal.simek@amd.com
assigned-clocks are a dependency of clocks, however the dtschema has
limitation and expects clocks to be present in the binding using
assigned-clocks, not in other referenced bindings. The clocks were
defined in common fsl,imx6q-pcie-common.yaml, which is referenced by
fsl,imx6q-pcie-ep.yaml. The fsl,imx6q-pcie-ep.yaml used assigned-clocks
thus leading to warnings:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000:
Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
Fix this by moving clocks to each specific schema from the common one
and narrowing them to strictly match what is expected for given device.
Fixes: b10f82380e ("dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230508071837.68552-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- New support:
- UFS PHY for Qualcomm SA8775p, SM7150
- PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
- Mediatke hdmi phy support for mt8195
- rockchip naneng combo phy support for RK358
- Updates:
- Drop Thunder Bay eMMC PHY driver
- RC support for PCIe phy for Qualcomm SDX55
- SGMII support in WIZ driver for J721E
- PCIe and multilink SGMII PHY support in cadence driver
- Big pile of platform remove callback returning void conversions
-----BEGIN PGP SIGNATURE-----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=WwgW
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New support:
- UFS PHY for Qualcomm SA8775p, SM7150
- PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
- Mediatke hdmi phy support for mt8195
- rockchip naneng combo phy support for RK358
Updates:
- Drop Thunder Bay eMMC PHY driver
- RC support for PCIe phy for Qualcomm SDX55
- SGMII support in WIZ driver for J721E
- PCIe and multilink SGMII PHY support in cadence driver
- Big pile of platform remove callback returning void conversions"
* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: cadence: cdns-dphy-rx: Add common module reset support
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
phy: mediatek: add support for phy-mtk-hdmi-mt8195
phy: phy-mtk-hdmi: Add generic phy configure callback
dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
dt-bindings: phy: cadence-torrent: drop assigned-clocks
dt-bindings: phy: cadence-sierra: drop assigned-clocks
phy: rockchip: remove unused hw_to_inno function
phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
phy: qcom-qmp-ufs: Add SM7150 support
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmRIKooUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxq7A/9G0sInrqvqH2I9/Set/FnmMfCtGDH
YcEjHYYxL+pztSiXTavDV+ib9iaut83oYtcV9p1bUMhJoZdKNZhrNdIGzRFSemI4
0/ShtklPzNEu6nPPL24CnEzgbrODBU56ZvzrIE/tShEoOjkKa1triBnOA/JMxYTL
cUwqDQlDkdpYniCgxy05QfcFZ0mmSOkbl7runGfTMTiUKKC3xSRiaW5YN9KZe3i7
G5YHu1VVCjeQdQSICHYwyFmkyiqosCoajQNp1IHBkWqSwilzyZMg0NWJobVSA7M/
mXXnzLtFcC60oT58/9MaggQwDTaSGDE8mG+sWv05bB2u5TQVyZEZqZ4c2FzmZIZT
WLZYLB6PFRW0zePEuMnVkSLS2npkX+aGaBv28bf88sjorpaYNG01uYijnLEceolQ
yBPFRN3bsRuOyHvYY/tiZX/BP7z/DS++XXwA8zQWZnYsXSlncJdwCNquV0xIwUt+
hij4/Yu7o9SgV1LbuwtkMFAn3C9Szc65Eer+IvRRdnMZYphjVHbA5F2msRFyiCeR
HxECtMQ1jBnVrpQAcBX1Sz+Vu5MrwCqzc2n6tvTQHDvVNjXfkG3NaFhxYPc1IL9Z
NJMeCKfK1qzw7TtbvWXCluTTIM9N/bNJXrJhQbjNY7V6IaBZY1QNYW0ZFfGgj6Gb
UUPgndidRy4/hzw=
=HPXl
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
- Use correct PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register for v2.7.0
(Manivannan Sadhasivam)
- Remove "PCIE20_" prefix from register definitions (Manivannan Sadhasivam)
- Sort registers and bitfield declarations (Manivannan Sadhasivam)
- Convert to GENMASK and FIELD_PREP (Manivannan Sadhasivam)
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 (Manivannan
Sadhasivam)
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 (Manivannan Sadhasivam)
- Rename qcom_pcie_config_sid_sm8250() to be non SM8250-specific
(Manivannan Sadhasivam)
- Add DT "mhi" register region for supported SoCs (Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug low power issues
(Manivannan Sadhasivam)
- Support system suspend and resume; reduce interconnect bandwidth and turn
off clock and PHY if there are no active devices (Manivannan Sadhasivam)
- Enable async probe by default to reduce boot time (Manivannan Sadhasivam)
- Add Manivannan Sadhasivam as qcom DT binding maintainer, replacing
Stanimir Varbanov (Manivannan Sadhasivam)
- Add DT binding and driver support for Qcom SDX55 SoC (Manivannan
Sadhasivam)
- Add DT binding and driver support for SM8550 SoC (Abel Vesa)
- Document msi-map and msi-map-mask DT properties (Manivannan Sadhasivam)
* pci/controller/qcom:
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
The Qcom PCIe controller is capable of using either internal MSI controller
or the external GIC-ITS for signaling MSIs sent by endpoint devices.
Currently, the binding only documents the internal MSI implementation.
Let's document the GIC-ITS imeplementation by making use of msi-map and
msi-map-mask properties. Only one of the implementation should be used
at a time and the drivers can choose the preferred one.
Link: https://lore.kernel.org/r/20230411121442.22227-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Add the SM8550 platform to the binding.
Link: https://lore.kernel.org/r/20230320144658.1794991-1-abel.vesa@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.
Link: https://lore.kernel.org/r/20230308082424.140224-5-manivannan.sadhasivam@linaro.org
Fixes: 31c9ef0025 ("dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for the PCIe controller on the Qcom SDX55 SoC to the binding.
Link: https://lore.kernel.org/r/20230308082424.140224-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stan is no longer working with MMSOL and expressed his interest to not
continue maintaining Qcom PCIe driver. Since I took over the driver
maintainership, I'm stepping in to maintain the binding also.
Link: https://lore.kernel.org/r/20230308082424.140224-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
"mhi" register region contains the MHI registers that could be used by
the PCIe controller drivers to get debug information like PCIe link
transition counts on newer SoCs.
Link: https://lore.kernel.org/r/20230316081117.14288-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Restruct i.MX PCIe schema, derive the common properties, thus they can
be shared by both the RC and Endpoint schema.
Update the description of fsl,imx6q-pcie.yaml, and move the EP mode
compatible to fsl,imx6q-pcie-ep.yaml.
Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
accordingly.
Link: https://lore.kernel.org/r/1676441915-1394-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230320233911.2920364-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The block found in the Apple M2 SoC is compatible with the existing
driver, and supports 4 downstream ports like the t6000 one.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
-----BEGIN PGP SIGNATURE-----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=/y4d
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
- Clean up uniphier-ep reg, clocks, resets, and their names (Kunihiko
Hayashi)
* pci/controller/uniphier:
dt-bindings: PCI: uniphier-ep: Clean up reg, clocks, resets, and their names
IPQ8074 has one Gen2 and one Gen3 PCIe port, with Gen2 already supported.
Document Gen3 port which uses the same controller as IPQ6018.
Link: https://lore.kernel.org/r/20230113164449.906002-6-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Sort the compatibles list alphabetically for maintenance.
Link: https://lore.kernel.org/r/20230113164449.906002-5-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add bindings for two PCIe hosts on SM8350 platform. The only difference
between them is in the aggre0 clock, which warrants the oneOf clause for
the clocks properties.
Link: https://lore.kernel.org/r/20221118233242.2904088-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
qcom,perst-regs is an phandle array of one item with a phandle and its
arguments.
Link: https://lore.kernel.org/r/20221109113202.74406-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
MSM8996 and MSM8998 use the same clocks, so use one order to make the
binding simpler.
Link: https://lore.kernel.org/r/20230106081203.14118-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Add new compatible for MSM8998 (compatible with MSM8996) to allow further
customizing if needed and to accurately describe the hardware.
Link: https://lore.kernel.org/r/20230106081203.14118-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Instead of "oneOf:" choices, use "allOf:" and "if:" to define reg, clocks,
resets, and their names that can be taken by the compatible string.
The order of their names doesn't change here.
Link: https://lore.kernel.org/r/20221223070713.20549-2-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Prepare for extending compatible list by adding oneOf keyword. No
functional changes.
Link: https://lore.kernel.org/r/20230106081203.14118-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Convert the Rockchip RK3399 PCIe Host/Endpoint controller to DT schema
format. Like most dual mode PCI controllers, we need to split the schema
into common, host and endpoint schemas.
Link: https://lore.kernel.org/r/20221219191209.1975834-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding" or a "schema", but instead just describe
the hardware.
Manual updates to various binding titles, including capitalizing them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # opp
Link: https://lore.kernel.org/r/20221216163815.522628-10-krzysztof.kozlowski@linaro.org
[robh: add trivial-devices.yaml and net/can/microchip,mcp251xfd.yaml]
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The i.MX6 and i.MX7D does not use block controller to toggle PCIe
reset, hence the PCIe DT description contains three reset entries
on these older SoCs. Add this exception into the binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221211024859.672076-3-marex@denx.de
Signed-off-by: Rob Herring <robh@kernel.org>
The i.MX SoCs have various power domain configurations routed into
the PCIe IP. MX6SX is the only one which contains 2 domains and also
uses power-domain-names. MX6QDL do not use any domains. All the rest
uses one domain and does not use power-domain-names anymore.
Document all those configurations in the DT binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221211024859.672076-2-marex@denx.de
Signed-off-by: Rob Herring <robh@kernel.org>
The i.MX SoCs have various clock configurations routed into the PCIe IP,
the list of clock is below. Document all those configurations in the DT
binding document.
All SoCs: pcie, pcie_bus
6QDL, 7D: + pcie_phy
6SX: + pcie_phy pcie_inbound_axi
8MQ: + pcie_phy pcie_aux
8MM, 8MP: + pcie_aux
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221211024859.672076-1-marex@denx.de
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KULr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
make more things static.
- Make portdrv bind to Switch Ports that have AER. Previously, if
these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
the Ports couldn't be suspended to low-power states. AER on these
Ports doesn't use interrupts, and the AER driver doesn't need to
claim them.
- Assign PCI domain IDs using ida_alloc(), which makes host bridge
add/remove work better.
Resource management:
- To work better with recent BIOSes that use EfiMemoryMappedIO for
PCI host bridge apertures, remove those regions from the E820 map
(E820 entries normally prevent us from allocating BARs). In v5.19,
we added some quirks to disable E820 checking, but that's not very
maintainable. EfiMemoryMappedIO means the OS needs to map the
region for use by EFI runtime services; it shouldn't prevent OS
from using it.
PCIe native device hotplug:
- Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
PCIe tunneling depends on native PCIe hotplug.
- Enable Command Completed Interrupt only if supported to avoid user
confusion from lspci output that says this is enabled but not
supported.
- Prevent pciehp from binding to Switch Upstream Ports; this happened
because of interaction with acpiphp and caused devices below the
Upstream Port to disappear.
Power management:
- Convert AGP drivers to generic power management. We hope to remove
legacy power management from the PCI core eventually.
Virtualization:
- Fix pci_device_is_present(), which previously always returned
"false" for VFs, causing virtio hangs when unbinding the driver.
Miscellaneous:
- Convert drivers to gpiod API to prepare for dropping some legacy
code.
- Fix DOE fencepost error for the maximum data object length.
Baikal-T1 PCIe controller driver:
- Add driver and DT bindings.
Broadcom STB PCIe controller driver:
- Enable Multi-MSI.
- Delay 100ms after PERST# deassert to allow power and clocks to
stabilize.
- Configure Read Completion Boundary to 64 bytes.
Freescale i.MX6 PCIe controller driver:
- Initialize PHY before deasserting core reset to fix a regression in
v6.0 on boards where the PHY provides the reference.
- Fix imx6sx and imx8mq clock names in DT schema.
Intel VMD host bridge driver:
- Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
SSDs in VT-d pass-through scenarios.
- Disable MSI remapping, which gets re-enabled by firmware during
suspend/resume.
MediaTek PCIe Gen3 controller driver:
- Add MT7986 and MT8195 support.
Qualcomm PCIe controller driver:
- Add SC8280XP/SA8540P basic interconnect support.
Rockchip DesignWare PCIe controller driver:
- Base DT schema on common Synopsys schema.
Synopsys DesignWare PCIe core:
- Collect DT items shared between Root Port and Endpoint (PERST GPIO,
PHY info, clocks, resets, link speed, number of lanes, number of
iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.
- Add dma-ranges support for Root Ports and Endpoints.
- Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
reduce code duplication.
- Add generic names for clocks and resets to encourage more
consistent naming across drivers using DesignWare IP.
- Stop advertising PTM Responder role for Endpoints, which aren't
allowed to be responders.
TI J721E PCIe driver:
- Add j721s2 host mode ID to DT schema.
- Add interrupt properties to DT schema.
Toshiba Visconti PCIe controller driver:
- Fix interrupts array max constraints in DT schema"
* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI: xilinx-nwl: Fix coding style violations
PCI: mvebu: Switch to using gpiod API
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: aardvark: Switch to using devm_gpiod_get_optional()
dt-bindings: PCI: mediatek-gen3: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: mt7621: Add sentinel to quirks table
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
...
DT Bindings:
- Various LED binding conversions and clean-ups. Convert the ir-spi-led,
pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently
reference LED common.yaml or multi-led schemas and disallow undefined
properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or were
missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61
-----BEGIN PGP SIGNATURE-----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=y/xu
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
json-schema patterns by default will match anywhere in a string, so
typically we want at least the start or end anchored. Fix the obvious
cases where the anchors were forgotten.
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221118223728.1721589-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatible string and clock-definition for mt7986. It needs 4 clocks
for PCIe, define them in binding.
Link: https://lore.kernel.org/r/20221127114142.156573-5-linux@fw-web.de
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
The PCIe driver covers different SOC which needing different clock
configs. Define them based on compatible.
Link: https://lore.kernel.org/r/20221127114142.156573-4-linux@fw-web.de
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Devices on some PCIe buses may be cache coherent and must be marked as
such in the devicetree to avoid data corruption.
This is specifically needed on recent Qualcomm platforms like SC8280XP.
Link: https://lore.kernel.org/r/20221205094530.12883-1-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Baikal-T1 SoC is equipped with DWC PCIe v4.60a Root Port controller, which
link can be trained to work on up to Gen.3 speed over up to x4 lanes. The
controller is supposed to be fed up with four clock sources: DBI
peripheral clock, AXI application Tx/Rx clocks and external PHY/core
reference clock generating the 100MHz signal. In addition to that the
platform provide a way to reset each part of the controller:
sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and
Hot/Power reset signal. The Root Port controller is equipped with multiple
IRQ lines like MSI, system AER, PME, HP, Bandwidth change, Link
equalization request and eDMA ones. The registers space is accessed over
the DBI interface. There can be no more than four inbound or outbound iATU
windows configured.
Link: https://lore.kernel.org/r/20221113191301.5526-15-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
As the DT-bindings description states the Rockchip PCIe controller is
based on the DW PCIe RP IP-core thus its DT-nodes are supposed to be
compatible with the common DW PCIe controller schema. Let's make sure they
are evaluated against it by referring to the snps,dw-pcie.yaml schema in
the allOf sub-schemas composition.
Link: https://lore.kernel.org/r/20221113191301.5526-14-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
DW PCIe EP/RP AXI- and TRGT1-master interfaces are responsible for the
application memory access. They are used by the RP/EP PCIe buses (MWr/MWr
TLPs emitted by the peripheral PCIe devices) and the eDMA block. Since all
of them mainly involve the system memory and basically mean DMA we can
expect the corresponding platforms can be designed in a way to make sure
the transactions are cache-coherent. As such the DW PCIe DT-nodes can have
the 'dma-coherent' property specified. Let's permit it in the DT-bindings
then.
Link: https://lore.kernel.org/r/20221113191301.5526-13-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
DW PCIe RP/EP reference manuals explicit define all the clocks and reset
requirements in [1] and [2]. Seeing the DW PCIe vendor-specific
DT-bindings have already started assigning random names to the same set of
the clocks and resets lines, let's define a generic names sets and add
them to the DW PCIe common DT-schema.
Note since there are DW PCI-based vendor-specific DT-bindings with the
custom names assigned to the same clocks and resets resources we have no
much choice but to add them to the generic DT-schemas in order to have the
schemas being applicable for such devices. These names are marked as
vendor-specific and should be avoided being used in new bindings in favor
of the generic names.
[1] Synopsys DesignWare Cores PCI Express Controller Databook - DWC PCIe
Root Port, Version 5.40a, March 2019, p.55 - 78.
[2] Synopsys DesignWare Cores PCI Express Controller Databook - DWC PCIe
Endpoint, Version 5.40a, March 2019, p.58 - 81.
Link: https://lore.kernel.org/r/20221113191301.5526-12-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Even though there is a more-or-less limited set of the CSR spaces can be
defined for each DW PCIe controller the generic DT-schema currently
doesn't specify much limitations on the reg-space names used for one or
another range. In order to prevent the vendor-specific controller schemas
further deviation from the generic interface let's fix that by introducing
the reg-names definition in the common DW PCIe DT-schemas and preserving
the generic "reg" and "reg-names" properties in there. New DW PCIe device
DT-bindings are encouraged to use the generic set of the CSR spaces
defined in the generic DW PCIe RP/EP DT-bindings, while the already
available vendor-specific DT-bindings can still apple the common
DT-schemas.
Note the number of reg/reg-names items need to be changed in the DW PCIe
EP DT-schema since aside with the "dbi" CSRs space these arrays can have
"dbi2", "addr_space", "atu", etc ranges.
Also note since there are DW PCIe-based vendor-specific DT-bindings with
the custom names assigned to the same CSR resources we have no much choice
but to add them to the generic DT-schemas in order to have the schemas
being applicable for such devices. These names are marked as
vendor-specific and should be avoided being used in new bindings in favor
of the generic names.
Link: https://lore.kernel.org/r/20221113191301.5526-11-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Currently the 'interrupts' and 'interrupt-names' properties are defined
being too generic to really describe any actual IRQ interface. Moreover
the DW PCIe End-point devices are left with no IRQ signals. All of that
can be fixed by adding the IRQ-related properties to the common DW PCIe
DT-schemas in accordance with the hardware reference manual. The DW PCIe
common DT-schema will contain the generic properties definitions with just
a number of entries per property, while the DW PCIe RP/EP-specific schemas
will have the particular number of items and the generic resource names
listed.
Note since there are DW PCI-based vendor-specific DT-bindings with the
custom names assigned to the same IRQ resources we have no much choice but
to add them to the generic DT-schemas in order to have the schemas being
applicable for such devices. These names are marked as vendor-specific and
should be avoided being used in new bindings in favor of the generic
names.
Link: https://lore.kernel.org/r/20221113191301.5526-10-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
In accordance with [1] the CX_NFUNC IP-core synthesize parameter is
responsible for the number of physical functions to support in the EP
mode. Its upper limit is 32. Let's use it to constrain the number of
PCIe functions the DW PCIe EP DT-nodes can advertise.
[1] Synopsys DesignWare Cores PCI Express Controller Databook - DWC PCIe
Endpoint, Version 5.40a, March 2019, p. 887.
Link: https://lore.kernel.org/r/20221113191301.5526-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Having the generic compatible strings constraints with the 'any'+'generic
string' semantic implicitly encourages either to add new DW PCIe-based
DT-bindings with the generic compatible string attached or just forget
about adding new DT-bindings since the corresponding DT-node will be
evaluated anyway. Moreover having that semantic implemented in the
generic DT-schema causes the DT-validation tool to apply the schema twice:
first by implicit compatible-string-based selection and second by means of
the 'allOf: [ $ref ]' statement. Let's fix all of that by dropping the
compatible property constraints and selecting the generic DT-schema only
for the purely generic DW PCIe DT-nodes. The later is required since there
is a driver for such devices. (Though there are no such DT-nodes currently
defined in the kernel DT sources.)
Link: https://lore.kernel.org/r/20221113191301.5526-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
In accordance with [1] DW PCIe controllers support up to Gen5 link speed.
Let's add the max-link-speed property upper bound to 5 then. The DT
bindings of the particular devices are expected to setup more strict
constraint on that parameter.
[1] Synopsys DesignWare Cores PCI Express Controller Databook, Version
5.40a, March 2019, p. 27
Link: https://lore.kernel.org/r/20221113191301.5526-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
It's normal to have the DW PCIe RP/EP DT-nodes equipped with the explicit
PHY phandle references. There can be up to 16 PHYs attach in accordance
with the maximum number of supported PCIe lanes. Let's extend the common
DW PCIe controller schema with the 'phys' and 'phy-names' properties
definition. There two types PHY names are defined: preferred generic names
'^pcie[0-9]+$' and non-preferred vendor-specific names
'^pcie([0-9]+|-?phy[0-9]*)?$' so to match the names currently supported by
the DW PCIe platform drivers ("pcie": meson; "pciephy": qcom, imx6;
"pcie-phy": uniphier, rockchip, spear13xx; "pcie": intel-gw; "pcie-phy%d":
keystone, dra7xx; "pcie": histb, etc).
Link: https://lore.kernel.org/r/20221113191301.5526-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
It's absolutely redundant seeing by default each node is embedded into its
own example-X node with address and size cells set to 1.
Link: https://lore.kernel.org/r/20221113191301.5526-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Currently both DW PCIe Root Port and End-point DT bindings are defined as
separate schemas. Carefully looking at them, at the hardware reference
manuals and seeing there is a generic part of the driver used by the both
RP and EP drivers we can greatly simplify the DW PCIe controller bindings
by moving some of the properties into the common DT schema. It concerns
the PERST GPIO control, number of lanes, number of iATU windows and CDM
check properties. They will be defined in the snps,dw-pcie-common.yaml
schema which will be referenced in the DW PCIe Root Port and End-point DT
bindings in order to evaluate the common for both of these controllers
properties. The rest of properties like reg{,-names}, clock{s,-names},
reset{s,-names}, etc will be consolidate there in one of the next commits.
Link: https://lore.kernel.org/r/20221113191301.5526-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
In accordance with the way the device DT-node is actually defined in
arch/arm64/boot/dts/toshiba/tmpv7708.dtsi and the way the device is probed
by the DW PCIe driver there are two IRQs it actually has. It's MSI IRQ the
DT-bindings lack. Let's extend the interrupts property constraints then
and fix the schema example so one would be acceptable by the actual device
DT-bindings.
Link: https://lore.kernel.org/r/20221113191301.5526-3-Sergey.Semin@baikalelectronics.ru
Fixes: 17c1b16340 ("dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Originally as it was defined the legacy bindings the pcie_inbound_axi and
pcie_aux clock names were supposed to be used in the fsl,imx6sx-pcie and
fsl,imx8mq-pcie devices respectively. But the bindings conversion has been
incorrectly so now the fourth clock name is defined as "pcie_inbound_axi
for imx6sx-pcie, pcie_aux for imx8mq-pcie", which is completely wrong.
Let's fix that by conditionally apply the clock-names constraints based on
the compatible string content.
Link: https://lore.kernel.org/r/20221113191301.5526-2-Sergey.Semin@baikalelectronics.ru
Fixes: 751ca492f1 ("dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Add support for ECAM aperture that is only supported for Tegra234
devices.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Co-developed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add unique device-id of 0xb013 for j721s2 platform to oneOf field.
Link: https://lore.kernel.org/r/20221028091716.21414-1-mranostay@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
In order to support mt8195 pcie node, update the yaml to support new
properties of iommu and power-domain, and update the reset-names
property to allow only one 'mac' name.
Link: https://lore.kernel.org/r/20221103025656.8714-2-tinghan.shen@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: TingHan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Both interrupts, and interrupt names weren't defined in both EP and host
yaml. Also define the only possible interrupt-name as link_state, and
maxItems of interrupts to one.
This patch resolves the following warning:
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: pcie-ep@2910000: Unevaluated properties are not allowed ('interrupt-names', 'interrupts' were unexpected)
From schema Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
Link: https://lore.kernel.org/r/20221025081909.404107-3-mranostay@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Add missing 'interrupt-controller' property and related subnodes to resolve
the following warning:
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: pcie@2910000: Unevaluated properties are not allowed ('interrupt-controller' was unexpected)
From schema: Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
Link: https://lore.kernel.org/r/20221025081909.404107-2-mranostay@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pOqY
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better.
- Revert to a BAR assignment inherited from firmware only when the
address is actually reachable via any upstream bridges, which fixes
some cases where firmware doesn't configure all devices.
- Add a sysfs interface to resize BARs so this can be done before
assigning devices to a VM through VFIO.
Power management:
- Disable Precision Time Management for all devices on suspend to
enable lower-power PM state. We previously did this just for Root
Ports, which isn't enough because downstream devices can still
generate PTM messages, which cause errors if it's disabled in the
Root Port.
- Save and restore the ASPM L1 PM Substates configuration for
suspend/ resume. Previously this configuration was lost, so L1.x
states likely stopped working after resume.
- Check whether the L1 PM Substates Capability exists. If it didn't
exist, we previously read junk and tried to configure L1 Substates
based on that.
- Fix the LTR_L1.2_THRESHOLD computation, which previously set a
threshold for entering L1.2 that was too low in some cases.
- Reduce the delay after transitions to or from D3cold by using
usleep_range() rather than msleep(), which often slept for ~19ms
instead of the 10ms normally required. The spec says 10ms is
enough, but it's possible we could trip over devices that need a
little more.
Error handling:
- Work around a BIOS bug that caused Intel Root Ports to advertise a
Root Port Programmed I/O (RP PIO) log size of zero, which caused
annoying warnings and prevented the kernel from dumping log
registers for DPC errors.
Qualcomm PCIe controller driver:
- Add support for SC8280XP and SA8540P host controllers and SM8450
endpoint controller.
- Disable Master AXI clock on endpoint controllers to save power when
link is idle or in L1.x.
- Expose link state transition counts via debugfs to help debug
issues with low-power states.
- Add auto-loading module support.
Synopsys DesignWare PCIe controller driver:
- Remove a dependency on ZONE_DMA32 by allocating the MSI target page
differently. There's more work to do related to eDMA controllers,
so it's not completely settled"
* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: Expose PCIe Resizable BAR support via sysfs
PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
PCI/ASPM: Ignore L1 PM Substates if device lacks capability
PCI/ASPM: Factor out L1 PM Substates configuration
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Refactor L1 PM Substates Control Register programming
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
...
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----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=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
- List platforms that use a single MSI host interrupt in qcom DT (Johan
Hovold)
- Add SC8280XP, SA8540P support to qcom DT binding and driver(Johan Hovold)
- Make all optional clocks truly optional in the driver (Johan Hovold)
- Rename per-IP structs to reflect the IP version (Johan Hovold)
- Sort device ID match table by compatible string (Johan Hovold)
- Add MODULE_DEVICE_TABLE to enable module autoloading (Dmitry Baryshkov)
- Drop the unused .post_deinit() callback (Johan Hovold)
- Rely on DT for clock information instead of hard-coding it in the driver
(Manivannan Sadhasivam)
- Disable IRQs when removing driver to avoid spurious IRQs later
(Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug issues with
low-power states (Manivannan Sadhasivam)
- Gate Master AXI clock to the MHI bus while in L1 substates to save power
(Manivannan Sadhasivam)
- Disable Master AXI clock to save power when there is no traffic on PCIe
(Manivannan Sadhasivam)
- Make the "PERST separation" debug feature optional in the DT and the
driver (Manivannan Sadhasivam)
- Define clocks to be per-platform in DT to prepare for future SoCs
(Manivannan Sadhasivam)
- Add SM8450 SoC support (Manivannan Sadhasivam)
- Check for platform_get_resource_byname() to avoid a NULL pointer
dereference (Yang Yingliang)
* pci/qcom:
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
PCI: qcom: Rename host-init error label
PCI: qcom: Drop unused post_deinit callback
PCI: qcom-ep: Add MODULE_DEVICE_TABLE
PCI: qcom: Sort device-id table
PCI: qcom: Clean up IP configurations
PCI: qcom: Make all optional clocks optional
PCI: qcom: Add support for SA8540P
PCI: qcom: Add support for SC8280XP
dt-bindings: PCI: qcom: Add SA8540P to binding
dt-bindings: PCI: qcom: Add SC8280XP to binding
dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt
Add devicetree bindings support for SM8450 SoC. Only the clocks are
different on this platform, rest is same as SDX55.
Link: https://lore.kernel.org/r/20220914075350.7992-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
In preparation for adding the bindings for future SoCs, define the
clocks per platform.
Link: https://lore.kernel.org/r/20220914075350.7992-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.
Remove the corresponding property "qcom,perst-regs" from the required
properties list.
Link: https://lore.kernel.org/r/20220914075350.7992-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Recent versions of dt-schema warn about unevaluatedProperties:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected)
From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
The clocks are required to enable interfaces between the FPGA fabric
and the core complex, so add them to the binding.
Link: https://lore.kernel.org/r/20220819231415.3860210-3-mail@conchuod.ie
Fixes: 6ee6c89aac ("dt-bindings: PCI: microchip: Add Microchip PolarFire host binding")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
The commit b92225b034 ("dt-bindings: PCI: designware: Fix
'unevaluatedProperties' warnings") removed the clock-names property as
a requirement and from the example as it triggered unevaluatedProperty
warnings. dtbs_check was not able to pick up on this at the time, but
now can:
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dtb: pcie@e00000000: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: linux/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
The property was already in use by the FU740 DTS and the clock must be
enabled. The Linux and FreeBSD drivers require the property to enable
the clocks correctly Re-add the property and its "clocks" dependency,
while making it required.
Link: https://lore.kernel.org/r/20220819231415.3860210-2-mail@conchuod.ie
Fixes: b92225b034 ("dt-bindings: PCI: designware: Fix 'unevaluatedProperties' warnings")
Fixes: 43cea116be ("dt-bindings: PCI: Add SiFive FU740 PCIe host controller")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
MT8188 and MT8195 are ARM platform SoCs with the same PCIe IP as MT8192.
Also add new clock name "peri_mem" since the MT8188 and MT8195 use clock
"peri_mem" instead of "top_133m".
Link: https://lore.kernel.org/r/20220802120624.19258-1-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SA8540P is a new platform related to SC8280XP but which uses a single
host interrupt for MSI routing.
Link: https://lore.kernel.org/r/20220714071348.6792-4-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Add the SC8280XP platform to the binding.
SC8280XP use four host interrupts for MSI routing so remove the obsolete
comment referring to newer chipsets supporting one or eight interrupts
(e.g. for backwards compatibility).
Link: https://lore.kernel.org/r/20220714071348.6792-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Explicitly enumerate the older platforms that have a single msi host
interrupt. This allows for adding further platforms with, for example,
four msi interrupts without resorting to nested conditionals.
Drop the redundant comment about older chipsets instead of moving it.
Link: https://lore.kernel.org/r/20220714071348.6792-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
-----BEGIN PGP SIGNATURE-----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=9TAR
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat
Kumar Gogada)
* pci/ctrl/xilinx-cpm:
MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers
PCI: xilinx-cpm: Add support for Versal CPM5 Root Port
dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin)
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and Endpoint
mode (Vidya Sagar)
- Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe
doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar)
- Search for Vendor-Specific RAS-DEC capability instead of hard-coding
offset (Vidya Sagar)
- Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port
interrupt handling (Vidya Sagar)
- Clear Bandwidth Management interrupt status bit to avoid interrupt storm
(Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix offset when clearing bit in Data Link Feature capability (Vidya
Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar)
* pci/ctrl/tegra194:
PCI: tegra194: Add Tegra234 PCIe support
PCI: tegra194: Extend Endpoint mode support
PCI: tegra194: Fix link up retry sequence
PCI: tegra194: Clean up the exit path for Endpoint mode
PCI: tegra194: Enable support for 256 Byte payload
PCI: tegra194: Clear bandwidth management status
PCI: tegra194: Fix Root Port interrupt handling
PCI: tegra194: Find RAS DES PCIe capability offset
Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie"
PCI: Disable MSI for Tegra234 Root Ports
dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode
dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode
dt-bindings: PCI: tegra194: Convert to json-schema
PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep()
# Conflicts:
# drivers/pci/controller/dwc/pcie-designware.h
# drivers/pci/controller/dwc/pcie-tegra194.c
- Add PHY clock source implementation (Dmitry Baryshkov)
- Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe
clocks (Dmitry Baryshkov)
- Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi)
- Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs
(Robert Marko)
- Power on PHY before accessing DBI registers on all variants for
consistency (Robert Marko)
- Remove unnecessary pipe_clk handling since this is done in PHY drivers
(Dmitry Baryshkov)
- Drop manual pipe_clk_src handling (Dmitry Baryshkov)
- Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach)
- Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch
Siach)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Fix DT description typo (Baruch Siach)
- Fix DT "compatibles" typo (Johan Hovold)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
* pci/ctrl/qcom:
PCI: qcom: Allow ASPM L1 and substates for 2.7.0
dt-bindings: PCI: qcom: Fix reset conditional
dt-bindings: PCI: qcom: Fix description typo
PCI: qcom: Add IPQ60xx support
PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*
PCI: dwc: Move GEN3_RELATED DBI definitions to common header
PCI: qcom: Drop manual pipe_clk_src handling
PCI: qcom: Remove unnecessary pipe_clk handling
PCI: qcom: Power on PHY before DBI register accesses
PCI: qcom: Power on PHY before IPQ8074 DBI register accesses
PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks
clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
clk: qcom: regmap: add PHY clock source implementation
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of mediatek driver for ARCH_AIROHA (Felix Fietkau)
* pci/ctrl/mediatek:
PCI: mediatek: Allow building for ARCH_AIROHA
dt-bindings: PCI: mediatek: Add Airoha EN7532 support
Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for
generic host. This fixes unevaluated property warnings on Arm Juno, AMD
Seattle, and FSL LS1028a.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220728175137.1172841-1-robh@kernel.org
On Qualcomm platforms each group of 32 MSI vectors is routed to the
separate GIC interrupt. Document mapping of additional interrupts.
Link: https://lore.kernel.org/r/20220707134733.2436629-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Add support for PCIe controllers that operate in the Endpoint mode in
tegra234 chipset.
Link: https://lore.kernel.org/r/20220721142052.25971-4-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add support for PCIe controllers that operate in the Root Port mode in
tegra234 chipset.
Link: https://lore.kernel.org/r/20220721142052.25971-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the Tegra194 PCIe bindings from the free-form text format to
json-schema.
Link: https://lore.kernel.org/r/20220721142052.25971-2-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
'reset-gpio-active-high' is missing a type definition and is not a common
property. The type is boolean.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20220719215031.1875860-1-robh@kernel.org
Xilinx Versal Premium series has CPM5 block which supports Root Port
functionality at Gen5 speed.
Add support for YAML schemas documentation for Versal CPM5 Root Port driver.
Link: https://lore.kernel.org/r/20220705105646.16980-2-bharat.kumar.gogada@xilinx.com
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fix the reset conditional which always evaluated to true due to a
misspelled property name ("compatibles" in plural).
Fixes: 6700a9b00f ("dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms")
Link: https://lore.kernel.org/r/20220629141000.18111-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add internal PCI bridge support for the R9A06G032 SOC. The Renesas RZ/N1D
(R9A06G032) internal PCI bridge is compatible with the one present in the
R-Car Gen2 family, but compared to R-Car Gen2, it needs three clocks
instead of one.
The 'resets' property is not required for the RZ/N1 family.
Link: https://lore.kernel.org/r/20220520094155.313784-3-herve.codina@bootlin.com
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Add a binding for Airoha EN7532, an ARM-based platform SoC integrating the
same PCIe IP as MT7622.
Link: https://lore.kernel.org/r/20220615125335.96089-1-nbd@nbd.name
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples.
The Apple PCIe host schema is missing 'power-domains' in the schema.
The example has 3 power domains. However, this is wrong too as actual
dts files have a single power domain and Sven confirmed 1 is correct.
Cc: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220531215815.2408477-1-robh@kernel.org
All existing vendor DTSes are using "cpm_slcr" reg followed by "cfg" reg.
This order is also suggested by node name which is pcie@fca10000 which
suggests that cpm_slcr register should be the first.
Driver itself is using devm_platform_ioremap_resource_byname() for both
names that's why there is no functional change even on description which
are using current order.
But still prefer to change order to cover currently used description.
Fixes: e22fadb1d0 ("PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port")
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220516102217.25960-1-bharat.kumar.gogada@xilinx.com
The Socionext interrupt controller internal to the the PCI block isn't
documented which causes warnings when unevaluatedProperties check is
also fixed. Add the 'interrupt-controller' child node and properties and
fixup the example so that interrupt properties can be parsed.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220525210117.2489333-1-robh@kernel.org
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmKP/tQUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzH0xAAojQowrSWzZ5FKTqI+L/L9ZXoAb+e
9IvQljKc9taJldmXp+EB9wkS/5B+VtQcC2qUQuWEQXUoECF8qHlcB4l+XQyd1tWO
O0vZxETH22xjLLrjG2F3l5rrfkJZAf2nEugwbDk97YEgiimeOiRcv3bx6AUCtj6I
rPJ13Fop3Jke7sQMcXYJe3gQLT1o1AKiQGghiCFNi/gzx2lXI6mmHBgLxFoiqcby
WpfXbvbJti95HRaahUR3HaDFfHj4HVkQNLlTtIykJ3Tl2/rOhWEJjI8JOIQpAA+M
WBrWw9rfgbScTiGV+dZ3h7hKiPnHKl9YETIX7L0oA2sj0jZcIs0d6mSBZx0kYuI9
eAlx+qSK9xpbQQr/fdYaUdF1q4QdtU0BYOvOWOzWsqYCECMRJ1PUHFSMbmR/+PNB
P5lHnAbggRSoxdAtwFYv1HTr+VpGH9S+5oxHCz3ohpMjYy6mkCZwHpZn3doaU3ci
KG6yIoVKftm3fZdtFvL03qHl/I8+X24ZhT/T/278PRGjkhSyr56hZo8hg0gqqTct
ngip8qNABmSbqpr73/W6Vl42zAbYtNk1BykYahbKupgW8FbT7hqaZTB05V87pVu+
Ko1aJM6VoOP9rMlKHI9ba8eYCzDrZbLZUFn7ljNPDpzutf0tAwtgwzvZBXN3za6+
Z9+D5dxmvrZEIbA=
=hEti
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert 2565e5b69c ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
PCI: rockchip-dwc: Add legacy interrupt support
...
- Add a "big-endian" DT property to indicate that the PEX_LUT and PF
register blocks are implemented in big-endian (Hou Zhiqiang)
- Add EP mode compatible strings for ls1028a (Xiaowei Bao)
- Define DT properties for AER/PME interrupts (Li Yang)
* remotes/lorenzo/pci/layerscape:
dt-bindings: pci: layerscape-pci: define AER/PME interrupts
dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028a
dt-bindings: pci: layerscape-pci: Update the description of SCFG property
dt-bindings: pci: layerscape-pci: Add a optional property big-endian
Add support for sc7280-specific clock and reset definitions.
Link: https://lore.kernel.org/r/20220506152107.1527552-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Instead of specifying the enum of possible reg-names, specify them
explicitly. This allows us to specify which chipsets need the "atu"
regions and which do not. Also it clearly describes which platforms
enumerate PCIe cores using the dbi region and which use parf region for
that.
Link: https://lore.kernel.org/r/20220506152107.1527552-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
On MSM8996/APQ8096 platforms the PCIe controller doesn't have any
resets. So move the requirement stanza under the corresponding if
condition.
Link: https://lore.kernel.org/r/20220506152107.1527552-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Changes to the schema:
- Fixed the ordering of clock-names/reset-names according to
the dtsi files.
- Mark vdda-supply as required only for apq/ipq8064 (as it was marked
as generally required in the txt file).
Changes to examples:
- Inline clock and reset numbers rather than including dt-bindings
files because of conflicts between the headers
- Split ranges and reg properties to follow current practice
- Change -gpio to -gpios
- Update IRQ flags to LEVEL_HIGH rater than NONE
- Removed extra "snps,dw-pcie" compatibility.
Note: while it was not clearly described in text schema, the majority of
Qualcomm platforms follow the snps,dw-pcie schema and use two
compatibility strings in the DT files: platform-specific one and a
fallback to the generic snps,dw-pcie one. However the platform itself is
not compatible with the snps,dw-pcie interface, so we are going to
remove it.
Link: https://lore.kernel.org/r/20220506152107.1527552-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Document the PCIe DT bindings for SM8150 SoC. The PCIe IP is similar to
the one used on SM8250.
Link: https://lore.kernel.org/r/20220326060810.1797516-2-bhupesh.sharma@linaro.org
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Now that the schema tools can extract type information for all
properties (in order to decode dtb files), finding properties missing
any type definition is fairly trivial though not yet automated.
Fix the various property schemas which are missing a type. Most of these
tend to be device specific properties which don't have a vendor prefix.
A vendor prefix is how we normally ensure a type is defined.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org
The snps,dw-pcie binds to a standalone driver. It is not fully
compatible with the Rockchip implementation and causes a hang if it
binds to the device.
Remove this binding as a valid fallback.
Link: https://lore.kernel.org/r/20220429123832.2376381-2-pgwipeout@gmail.com
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
We no longer use these since 111659c2a5 (and they never worked
anyway); drop them from the example to avoid confusion.
Fixes: 111659c2a5 ("arm64: dts: apple: t8103: Remove PCIe max-link-speed properties")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502091308.28233-1-marcan@marcan.st
Different platforms using this controller are using different numbers of
interrupt lines and the routing of events to these interrupt lines are
different too. So instead of trying to define names for these interrupt
lines, we define the more specific AER/PME events that are routed to
these interrupt lines.
For platforms which only has a single interrupt line for miscellaneous
controller events, we can keep using the original "intr" name for
backward compatibility.
Also change the example from ls1021a to ls1088a for better representation.
Link: https://lore.kernel.org/r/20220311234938.8706-5-leoyang.li@nxp.com
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add EP mode compatible string for ls1028a.
Link: https://lore.kernel.org/r/20220311234938.8706-4-leoyang.li@nxp.com
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Update the description of the second entry of 'fsl,pcie-scfg' property,
as the LS1043A PCIe controller also has some control registers in SCFG
block, while it has 3 controllers.
Link: https://lore.kernel.org/r/20220311234938.8706-3-leoyang.li@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
This property is to indicate the endianness when accessing the
PEX_LUT and PF register block, so if these registers are
implemented in big-endian, specify this property.
Link: https://lore.kernel.org/r/20220311234938.8706-2-leoyang.li@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
clk_set_rate_range() works so that the frequency is re-evaulated each time the
rate is changed. Previously we wouldn't let clk providers see a rate that was
different if it was still within the range, which could be bad for power if the
clk could run slower when a range expands. Now the clk provider can decide to
do something differently when the constraints change. This broke Nvidia's clk
driver so we had to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk framework
that we're going to extend in the next release. It already made it easy to find
corner cases in the rate range patches so I'm excited to see it cover more clk
code and increase our confidence in core framework patches in the future. I
also added a kunit test for the basic clk gate code and that work will continue
to cover more basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and additions.
Qualcomm again dominates the diffstat here with lots more SoCs being supported
and i.MX follows afer that with a similar number of SoCs gaining clk drivers.
Beyond those large additions there's drivers being modernized to use
clk_parent_data so we can move away from global string names for all the clks
in an SoC. Finally there's lots of little fixes all over the clk drivers for
typos, warnings, and missing clks that aren't critical and get batched up
waiting for the next merge window to open. Nothing super big stands out in the
driver pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on
Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks
-----BEGIN PGP SIGNATURE-----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=fP8L
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the source
level syntax information. There's a bunch of schema fixes as a result
of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename
or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass messages
also now print by default at PR_INFO level to help test automation.
-----BEGIN PGP SIGNATURE-----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=g1li
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
- Save pointer to device match data instead of copying it (Dmitry
Baryshkov)
- Add ddrss_sf_tbu flag to device match data instead of checking OF
compatible string (Dmitry Baryshkov)
- Add SM8450 SoC PCIe DT bindings (Dmitry Baryshkov)
- Add SM8450 PCIe support (Dmitry Baryshkov)
* remotes/lorenzo/pci/qcom:
PCI: qcom: Add SM8450 PCIe support
PCI: qcom: Add ddrss_sf_tbu flag
PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg
dt-bindings: pci: qcom: Document PCIe bindings for SM8450
We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, the dt-bindings should be modified as well.
Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/f9284873c2993a9952d9fe4f8dd5e89f20daab75.1646388139.git.zong.li@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the PCIe DT bindings for SM8450 SoC. The PCIe IP is similar
to the one used on SM8250, however unlike SM8250, PCIe0 and PCIe1 use
different set of clocks, so two compatible entries are required.
Link: https://lore.kernel.org/r/20220223101435.447839-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Controller driver needs to correctly configure PCIe link if it contains 1
or 4 SerDes PCIe lanes. Therefore add a new 'num-lanes' DT property for
mvebu PCIe controller. Property 'num-lanes' seems to be de-facto standard
way how number of lanes is specified in other PCIe controllers.
Link: https://lore.kernel.org/r/20220222155030.988-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Update PCI endpoint binding document for UniPhier NX1 SoC. Add a compatible
string, clock and reset lines for the SoC to the document.
Link: https://lore.kernel.org/r/1644480596-20037-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
