Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Therefore, snps,en-tx-lpi-clockgating is technically incorrect, so this
commit deprecates the property in the binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUF-005vGd-C5@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2025-03-10
An update from ieee802154 for your *net-next* tree:
Andy Shevchenko reworked the ca8210 driver to use the gpiod API and fixed
a few problems of the driver along the way.
* tag 'ieee802154-for-net-next-2025-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
dt-bindings: ieee802154: ca8210: Update polarity of the reset pin
ieee802154: ca8210: Switch to using gpiod API
ieee802154: ca8210: Get platform data via dev_get_platdata()
ieee802154: ca8210: Use proper setters and getters for bitwise types
====================
Link: https://patch.msgid.link/20250310185752.2683890-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add compatible string "fsl,imx94-flexcan" for the i.MX94 chip, which
is backward compatible with i.MX95. Set it to fall back to
"fsl,imx95-flexcan".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250307190816.2971810-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently the flexcan driver does only support adding PHYs by using the
"old" regulator bindings. Add support for CAN transceivers as a PHY.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250312-flexcan-add-transceiver-caps-v4-1-29e89ae0225a@liebherr.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The `snps,dwmac.yaml` binding currently sets `maxItems: 3` for the
`interrupts` and `interrupt-names` properties, but vendor bindings
selecting `snps,dwmac.yaml` do not impose these limits.
Define constraints for `interrupts` and `interrupt-names` properties in
various DWMAC vendor bindings to ensure proper validation and consistency.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/20250309003301.1152228-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3562,
RK3576 and RK3588 use a mix of GRF and peripheral GRF regs.
Prior to the commit b331b8ef86 ("dt-bindings: net: convert
rockchip-dwmac to json-schema") the property rockchip,grf was listed
under "Required properties". During the conversion this was lost and
rockchip,grf has since then incorrectly been treated as optional and
not as required.
Similarly, when rockchip,php-grf was added to the schema in the
commit a2b7783142 ("dt-bindings: net: rockchip-dwmac: add rk3588 gmac
compatible") it also incorrectly has been treated as optional for all
GMAC variants, when it should have been required for RK3588, and later
also for RK3576.
Update this binding to require rockchip,grf and rockchip,php-grf to
properly reflect that GRF (and peripheral GRF for RK3576/RK3588) is
required to control part of GMAC.
This should not introduce any breakage as all Rockchip GMAC nodes have
been added together with a rockchip,grf phandle (and rockchip,php-grf
where required) in their initial commit.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250308213720.2517944-2-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The GMAC IP on SG2044 is almost a standard Synopsys DesignWare
MAC (version 5.30a) with some extra clock.
Add necessary compatible string for this device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250307011623.440792-2-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature. In addition, there was the usual
set of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZ8iK9QAKCRAsFbugiYzL
e9P0AP0T2yU1fl3IRw+q9toRv126vJ7eSKWDZXDU1TppGn/FMQEAiI49Jnhp6WaO
e3nbULnMVF+oOoOTWMJrJ3f6aU5C4AE=
=yTAR
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20250305' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
====================
ath.git patches for v6.15
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature. In addition, there was the usual
set of bug fixes and cleanups.
====================
Link: https://lore.kernel.org/linux-wireless/d01b1976-ebe8-48cd-8f49-32bfa00bed7e@oss.qualcomm.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code has been updated to follow what datasheet says about
the polarity of the reset pin, which is active-low. Update
the device tree bindings accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/20250305105656.2133487-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Add a binding for the "Gianfar" ethernet controller, also known as
TSEC/eTSEC.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250228-gianfar-yaml-v2-3-6beeefbd4818@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When this binding was originally written, all known TSEC Ethernet
controllers had a Ten-Bit Interface (TBI). However, some datasheets such
as for the MPC8315E suggest that this is not universally true:
The eTSECs do not support TBI, GMII, and FIFO operating modes, so all
references to these interfaces and features should be ignored for this
device.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20250228-gianfar-yaml-v2-2-6beeefbd4818@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the information related to the Freescale Gianfar (TSEC) MDIO bus
and the Ten-Bit Interface (TBI) from fsl-tsec-phy.txt to a new binding
file in YAML format, fsl,gianfar-mdio.yaml.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250228-gianfar-yaml-v2-1-6beeefbd4818@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----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=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the airoha,npu property for the NPU node available on
EN7581 SoC. The airoha Network Processor Unit (NPU) is used to
offload network traffic forwarded between Packet Switch Engine
(PSE) ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds the NPU document binding for EN7581 SoC.
The Airoha Network Processor Unit (NPU) provides a configuration interface
to implement wired and wireless hardware flow offloading programming Packet
Processor Engine (PPE) flow table.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath12k).
Deprecate qcom,ath12k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-3-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath11k).
Deprecate qcom,ath11k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-2-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Devicetree properties describing exactly the same thing should be
reusable between device bindings. All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath10k).
Deprecate qcom,ath10k-calibration-variant and alike, so we gradually
switch to a common property. This will also allow moving these
properties to common schema, if desired.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-1-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add dtschema for the MDIO controller found in the RTL9300 Ethernet
switch. The controller is slightly unusual in that direct MDIO
communication is not possible. We model the MDIO controller with the
MDIO buses as child nodes and the PHYs as children of the buses. The
mapping of switch port number to MDIO bus/addr requires the
ethernet-ports sibling to provide the mapping via the phy-handle
property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-4-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially realtek,rtl9301-switch was placed under mfd/ because it had
some non-switch related blocks (specifically i2c and reset) but with a
bit more review it has become apparent that this was wrong and the
binding should live under net/.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware contants do not fit the purpose of bindings because they are not
independent IDs for abstractions. They are more or less just contants which
better to wire via header with DT which is using it.
That's why add deprecated message to dt binding header and also update
existing dt bindings not to use macros from the header and replace them by
it's value. Actually value is not relevant because it is only example.
The similar changes have been done by commit 9d92925768 ("dt-bindings:
pinctrl: samsung: deprecate header with register constants").
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2a6f0229522327939e6893565e540b75f854a37b.1738600745.git.michal.simek@amd.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAme1voYTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnFOCB/0dTrOBuRiX1Gg6yIkYs3lzrWlmCv98
itowE3y2RfAxlFZXaTSNTCFKrKpyk56C13tcq2okaqCWrBzcDkNeVemsNKJ49OBK
pYdxXsiJtddaVg6qJ2up2f/4btgbD1tEH0vzDm2S4z5YigjDFuAiQslbNi6rFSSt
Lcp4yhPcmQ+L+3nGYP0HmYPIX0K1gWL3jFEFPr4e/XWiCKn9bYOUdYRUV6xVa1Dz
lHkA8rqLJ+Gdwc6P3FgSdrTUafCFfgeFlPNnl1ULiLchHK2ZklPWZjFBb/jhKRJM
/Ef9RgpMXrSb8P6lS25RWptTSFnKrg00VqVWV0Fi9rxELe3OvSdoAUuK
=URof
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.15-20250219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-02-19
this is a pull request of 12 patches for net-next/master.
The first 4 patches are by Krzysztof Kozlowski and simplify the c_can
driver's c_can_plat_probe() function.
Ciprian Marian Costea contributes 3 patches to add S32G2/S32G3 support
to the flexcan driver.
Ruffalo Lavoisier's patch removes a duplicated word from the mcp251xfd
DT bindings documentation.
Oleksij Rempel extends the J1939 documentation.
The next patch is by Oliver Hartkopp and adds access for the Remote
Request Substitution bit in CAN-XL frames.
Henrik Brix Andersen's patch for the gs_usb driver adds support for
the CANnectivity firmware.
The last patch is by Robin van der Gracht and removes a duplicated
setup of RX FIFO in the rockchip_canfd driver.
linux-can-next-for-6.15-20250219
* tag 'linux-can-next-for-6.15-20250219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_chip_fifo_setup(): remove duplicated setup of RX FIFO
can: gs_usb: add VID/PID for the CANnectivity firmware
can: canxl: support Remote Request Substitution bit access
can: j1939: Extend stack documentation with buffer size behavior
dt-binding: can: mcp251xfd: remove duplicate word
can: flexcan: add NXP S32G2/S32G3 SoC support
can: flexcan: Add quirk to handle separate interrupt lines for mailboxes
dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
can: c_can: Use syscon_regmap_lookup_by_phandle_args
can: c_can: Use of_property_present() to test existence of DT property
can: c_can: Simplify handling syscon error path
can: c_can: Drop useless final probe failure message
====================
Link: https://patch.msgid.link/20250219113354.529611-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add S32G2/S32G3 SoCs compatible strings.
A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.
Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250113120704.522307-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add property tx-amplitude-100base-tx-percent in the device tree bindings
for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
necessary to compensate losses on the PCB and connector, so the voltages
measured on the RJ45 pins are conforming.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-1-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, rfkill state is set to unblocked. Sometimes, we want to boot
in blocked state and let the application unblock the rfkill.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250116084702.3473176-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmemULoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvFigf/fvP7ri+6cyE50Qvau9lQjmrvojQx6Wg4
Jp5kOfXNzyLrEp+SA49UdIEGKak/Speo99ntWvrGrXWSHvW76DzNq5c+XJqffhm6
s+uOcdHlqBRXzD9PuZ0NT75nlb0gBkqGyV6VUW90dwI/lyGNEAwUrbdUO7B8Kmty
KW2hPQP4Zp5Sjm1ZGMKRmwt0qxZBrGKqCq7RqKYldO7PKOhKGfwhpViZxtceo5/2
NdyCVh6LeGP8Kjwo7cMfprNAcLQ2F5+Q9xtjid69TTrW77E9PVK73IGBb+pPwgAd
AzdkNPMX3TwAm/NyAuMhMWXF9VzVzFIfboNgLiAlT2JSYNU7vMtqng==
=54RU
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Device specific schemas should not allow undefined properties which is
what 'additionalProperties: true' allows. Add a reference to
mc-peripheral-props.yaml which has the additional properties used, and
fix this constraint.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-4-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
I'm stepping down as ath10k, ath11k and ath12k maintainer so remove me from
MAINTAINERS file and Device Tree bindings. Jeff continues as the maintainer.
As my quicinc.com email will not work anymore so add an entry to .mailmap file
to direct the mail to my kernel.org address.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250203180445.1429640-1-kvalo@kernel.org
but as usual there's a slight concentration of fixes for issues
added in the last two weeks before the MW, and driver bugs
from 6.13 which tend to get discovered upon wider distribution.
Including fixes from IPSec, netfilter and Bluetooth.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects
netdev state with a mutex now
Previous releases - regressions:
- eth: mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- eth: bgmac: reduce max frame size to support just 1500 bytes;
the jumbo frame support would previously cause OOB writes,
but now fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted,
avoid false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm: make sure skb->sk is a full sock before accessing its fields
- xfrm: fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GjBE
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
The qcs615-ride utilizes the same EMAC as the qcs404, rather than the
sm8150. The current incorrect fallback could result in packet loss.
The Ethernet on qcs615-ride is currently not utilized by anyone. Therefore,
there is no need to worry about any ABI impact.
Fixes: 32535b9410 ("dt-bindings: net: qcom,ethqos: add description for qcs615")
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250120-schema_qcs615-v4-1-d9d122f89e64@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmeOYOYXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClhzxAAsytG5oxMbCNEbLV00CqX58n3
BJTpDVaG6CYy+pr6lgNBljswl1kzX36sHuBsD6nUve8ZP145UU3PC8tEgdYTDzx1
oLog+ObTTkHlVK2X9XWfhuv6EDhqBN5z3Z43yKVCAfFgti/amSgevv1DKJSZ5Q3W
4ybo/4sttXL2PaShLkAUnm+w50Iq+D7i2vq6mvXyw90vsS/wvO//hljW3tLTKA5G
Xsb3jNZt48F+AKFrIbB2V2c2SgiyyCR+po+5ZGCAIPwwC/SCJBjkmDzPd0+5aAVU
HQudyUC6vdB/gODYJtsyV4q5YHOLqP4hLaN46hwD0SZHmQPgTIMxOlQCZDUqxwUn
GlZsN5nBwEl+eKVDiiiS3b8wO0geXjUVvw5+qvb1mXeHULBFlYxksJGE+eUfrW9D
ldouNLggHN6gtIFlPIS98D3ly2WPBGC/xMs3pvWaOK+hMeH1IpjZw+b8kcuojVIh
7mODdyxZGGaqGyhaWQHvwtHgGJKMbqm5sr2amVZkoChgNysomGpR/bMvBpv0HMC8
oUTGF8CaC8W4auTc6Jx7NtdAaHtPY9URN6Cdyuc8JeBDuKpG9B1m50lrUW3f3PZu
7njzBMdUQ+IBZ5WyimM06qREyFVQEJHiNVb1EnPTWctPoKVj1ZKmS5QeEOYUbUWi
9sC4TwrD2N2Rpuvl5MU=
=KHab
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmeKvq8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtJ3wf/bMRrED1k1xtC117yxBthXOZj7Ae0MG3s
cqIDBZ2MSmi596jfmc/FRFTN6Rie7+WQg8MGhpWpJt4WyvCd+IqmluLwuJGg3oHz
KdDQHN766cPb50mykTBY0m+Uh9eqyhaoozzK+KbrJZNLUt/Ri3DOdPInWP/ODKuT
uo9xv25zmOMQuUJlhOlFpOW68y6isuMsnPpgTvbtjndw3nPe+tVIfGPdg3xeQnq1
SG05wmOeJ8obmO1VsnmHPN20F5PfS5t2asu12UafR7KTiJOdP2QXKGNTy+ag7fQ/
9Sq6SzuPpbHHJJ93f0aJOkTUKdQVmk2xfCYNOyPNu1ewLqiVlvnkew==
=Vu+D
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZ4bgBAAKCRAsFbugiYzL
eyZoAQDoItj55hlA93r/BuzUc7/lCUztH/IOQBWitMrA9ZQ+8AEAxVVUctcRk0kC
VxVtQIg1OQONeftlfXAt6wAsGOtmOA8=
=Ve3o
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20250114' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.
We are now using the on-chip PMU node for power sequencing to manage the
enable/disable functionality of Bluetooth. Consequently, the inputs
previously marked as required under the Bluetooth node can be removed.
For instance, the enable GPIO is now managed by the PMU node with the
property bt-enable-gpios.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Expand the firmware-name property to specify the names of NVM and
rampatch firmware to load. This update will support loading specific
firmware (nvm and rampatch) for certain chips, like the QCA6698
Bluetooth chip, which shares the same IP core as the WCN6855 but has
different RF components and RAM sizes, requiring new firmware files.
We might use different connectivity boards on the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
So In firmware-name, if the NVM file has an extension, the NVM file will
be used. Otherwise, the system will first try the .bNN (board ID) file,
and if that fails, it will fall back to the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21.bin";
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmeA/ocTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b7FlB/9c3ThnLVI/eezSZGE2UpvjN3eZWemk
UkTxypJ9NpJkd1UovpOGVTNjAmlN+6+yjATJm8GBpSg99cN5Y8gcu7lWnsnidopm
mkUNE+ZPPmkxe/ay1d6BfqJKzZTqkdJ6w1QlIXFfDgbRr4YaX9bn3egdtoNhq4fR
0qRt6++7V3hhhlr3x0hrhB+3nrTkL8eVBVWNEKFPCnCn9E3p7izXwZAG/y/IC4sP
swTk1BbSZg9ajds/1DE2AVeUvqz63FnzjY7YChU5WdNY5bq/cFHGoCWn8aZEX/kC
YFrQC3lonlNa/A5IFfb32HaFT0qFFbOKBHXru/wFuuwJCKVLUKsmLsd/
=c3SH
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-01-10
Pierre-Henry Moussay adds PIC64GX compatibility to the DT bindings for
Microchip's mpfs-can IP core.
The next 3 patches are by Sean Nyekjaer and target the tcan4x5x
driver. First the DT bindings is converted to DT schema, then nWKRQ
voltage selection is added to the driver.
Dario Binacchi's patch for the sun4i_can makes the driver more
consistent by adding a likely() to the driver.
Another patch by Sean Nyekjaer for the tcan4x5x driver gets rid of a
false error message.
Charan Pedumuru converts the atmel-can DT bindings to DT schema.
The next 2 patches are by Oliver Hartkopp. The first one maps Oliver's
former mail addresses to a dedicated CAN mail address. The second one
assigns net/sched/em_canid.c additionally to the CAN maintainers.
Ariel Otilibili's patch removes dead code from the CAN dev helper.
The next 3 patches are by Sean Nyekjaer and add HW standby support to
the tcan4x5x driver.
A patch by Dario Binacchi fixes the DT bindings for the st,stm32-bxcan
driver.
The last 4 patches are by Jimmy Assarsson and target the kvaser_usb
and the kvaser_pciefd driver: error statistics are improved and
CAN_CTRLMODE_BERR_REPORTING is added.
* tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() fails
can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_usb: Update stats and state even if alloc_can_err_skb() fails
dt-bindings: can: st,stm32-bxcan: fix st,gcan property type
can: m_can: call deinit/init callback when going into suspend/resume
can: tcan4x5x: add deinit callback to set standby mode
can: m_can: add deinit callback
can: dev: can_get_state_str(): Remove dead code
MAINTAINERS: assign em_canid.c additionally to CAN maintainers
mailmap: add an entry for Oliver Hartkopp
dt-bindings: net: can: atmel: Convert to json schema
can: tcan4x5x: get rid of false clock errors
can: sun4i_can: continue to use likely() to check skb
can: tcan4x5x: add option for selecting nWKRQ voltage
dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option
dt-bindings: can: convert tcan4x5x.txt to DT schema
dt-bindings: can: mpfs: add PIC64GX CAN compatibility
====================
Link: https://patch.msgid.link/20250110112712.3214173-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SRAM memory shared pointed to by the st,gcan property is unique, so
we don't need an array of phandles.
Fixes: e43250c0ac ("dt-bindings: net: can: add STM32 bxcan DT bindings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241228150043.3926696-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. No functional changes, just correct the DTS
example so people will not rely on unaccepted files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Link: https://patch.msgid.link/20250108120242.156201-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Reviewed-by: Roger Quadros <rogerq@kernel.org> # for ti,k3-am654-*
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> # net/brcm,*
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250107125613.211478-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The documentation contained an unusual character due to an issue in my
personal b4 setup. Fix the problem by providing the correct PSE Pinout
Alternatives table number description.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107142659.425877-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lan969x switch device supports two RGMII port interfaces that can be
configured for MAC level rx and tx delays. Document two new properties
{rx,tx}-internal-delay-ps in the bindings, used to select these delays.
Tested-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241220-sparx5-lan969x-switch-driver-4-v5-9-fa8ba5dff732@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert old text based binding to json schema.
Changes during conversion:
- Add a fallback for `microchip,sam9x60-can` as it is compatible with the
CAN IP core on `atmel,at91sam9x5-can`.
- Add the required properties `clock` and `clock-names`, which were
missing in the original binding.
- Update examples and include appropriate file directives to resolve
errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241120-can-v3-1-da5bb4f6128d@microchip.com
[mkl: fixed indention in example]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The QCN9274 WiFi device supports WSI (WLAN Serial Interface). WSI is used
to exchange specific control information across radios using a doorbell
mechanism. This WSI connection is essential for exchanging control
information among these devices. The WSI interface in the QCN9274 includes
TX and RX ports, which are used to connect multiple WSI-supported devices
together, forming a WSI group.
Describe QCN9274 PCI wifi device with WSI interface.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241211153432.775335-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The GPIO2 pin on the DP83822 can be configured as clock output. Add
binding to support this feature.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
For more than a year all emails to Bhupesh Sharma's Linaro emails bounce
and there were no updates to mailmap. No reviews from Bhupesh, either,
so change the maintainer to Bjorn and Konrad (Qualcomm SoC maintainers).
Cc: Bhupesh Sharma <bhupesh.linux@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konradybcio@kernel.org>
Message-ID: <20241130094758.15553-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add basic description for DWMAC ethernet IP on NXP S32G2xx, S32G3xx
and S32R45 automotive series SoCs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-13-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nWKRQ pin supports an output voltage of either the internal reference
voltage (3.6V) or the reference voltage of
the digital interface 0-6V (VIO).
Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
If this property is omitted the reset default, the internal reference
voltage, is used.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20241114-tcan-wkrqv-v5-1-a2d50833ed71@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
PIC64GX CAN is compatible with the MPFS CAN, only add a fallback
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240930095449.1813195-2-pierre-henry.moussay@microchip.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
"micrel,led-mode" is not yet documented by a schema. It's irrelevant to
the example, so just drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225742.1784723-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"id" is not a documented property, so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225642.1783485-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
-----BEGIN PGP SIGNATURE-----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=niGG
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
* tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits)
Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC
Bluetooth: fix use-after-free in device_for_each_child()
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper
Bluetooth: ISO: Send BIG Create Sync via hci_sync
Bluetooth: hci_conn: Remove alloc from critical section
Bluetooth: ISO: Use kref to track lifetime of iso_conn
Bluetooth: SCO: Use kref to track lifetime of sco_conn
Bluetooth: HCI: Add IPC(11) bus type
Bluetooth: btusb: Add 3 HWIDs for MT7925
Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925
Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave
Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending
Bluetooth: ISO: Fix matching parent socket for BIS slave
Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending
Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s
Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()
Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925
Bluetooth: btmtk: adjust the position to init iso data anchor
...
====================
Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The example has "interrupt" property which is not a defined property. It
should be "interrupts" instead. "interrupts" also should not contain a
phandle.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225825.1785588-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"marvell,reg-init" is not yet documented by schema. It's irrelevant to
the example, so just drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225713.1784118-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a new optional device tree property device-wakeup-gpios, which
specifies the GPIO connected to BT_WAKE_IN pin of the NXP chipset.
If this property is defined, the driver will use this GPIO for driving chip
into sleep/wakeup state, else use the UART break signal by default.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has
4 internal PHYs and 1 SGMII port.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241109015705.82685-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce `mdio-parent-bus` property in the ksz DSA bindings to
reference the parent MDIO bus when the internal MDIO bus is attached to
it, bypassing the main management interface.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241106075942.1636998-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add description for the internal MDIO bus, including integrated PHY
nodes, to ksz DSA bindings.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241106075942.1636998-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation to describe the DesginWare-based GMAC controllers in
the T-HEAD TH1520 SoC.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://patch.msgid.link/20241103-th1520-gmac-v7-1-ef094a30169c@tenstorrent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hard processor system (HPS) on the Intel/Altera Arria10 provides
three Ethernet Media Access Controller (EMAC) peripherals. Each EMAC
can be used to transmit and receive data at 10/100/1000 Mbps over
ethernet connections in compliance with the IEEE 802.3 specification.
The EMACs on the Arria10 are instances of the Synopsis DesignWare
Universal 10/100/1000 Ethernet MAC, version 3.72a.
Support the Synopsis DesignWare version 3.72a, which is used in Intel's
Arria10 SoC, since it was missing.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241102114122.4631-3-l.rubusch@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add bindings for NXP NETC blocks control. Usually, NETC has 2 blocks of
64KB registers, integrated endpoint register block (IERB) and privileged
register block (PRB). IERB is used for pre-boot initialization for all
NETC devices, such as ENETC, Timer, EMDIO and so on. And PRB controls
global reset and global error handling for NETC. Moreover, for the i.MX
platform, there is also a NETCMIX block for link configuration, such as
MII protocol, PCS protocol, etc.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ENETC of i.MX95 has been upgraded to revision 4.1, and the vendor
ID and device ID have also changed, so add the new compatible strings
for i.MX95 ENETC. In addition, i.MX95 supports configuration of RGMII
or RMII reference clock.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The EMDIO of i.MX95 has been upgraded to revision 4.1, and the vendor
ID and device ID have also changed, so add the new compatible strings
for i.MX95 EMDIO.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver and description indicate "snps,kbbe" is a boolean, not an
uint32.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20241101211331.24605-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches. In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.
Per-driver highlights:
ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode
ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855
ath10k
* Fix multiple stack frame size warnings
* Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs
* Avoid NULL pointer error during SDIO remove
ath5k
* Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZyJQgxQcampvaG5zb25A
a2VybmVsLm9yZwAKCRAsFbugiYzLe9sMAQCdkwZjywM92STd/hoiKrrBPWIhs3AM
9DzFnw5+hFy18wD/Z5WbgMCPoC7hBArRFO50Jf7pdP9LpLQg4S0FUL2cLgw=
=Hfxd
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20241030' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.13
This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches. In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.
Per-driver highlights:
ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode
ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855
ath10k
* Fix multiple stack frame size warnings
* Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs
* Avoid NULL pointer error during SDIO remove
ath5k
* Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A
Add compatible for the MAC controller on qcs8300 platforms.
Since qcs8300 shares the same EMAC as sa8775p, so it fallback to the
compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Link: https://patch.msgid.link/20241029-schema-v3-2-fbde519eaf00@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add compatible for the MAC controller on qcs615 platform.
Since qcs615 shares the same EMAC as sm8150, so it fallback to that
compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Link: https://patch.msgid.link/20241029-schema-v3-1-fbde519eaf00@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
make dtbs_check:
arch/arm64/boot/dts/renesas/r8a77980-condor.dtb: ethernet@e7400000: 'iommus' does not match any of the regexes: '@[0-9a-f]$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/renesas,ether.yaml#
Ethernet Controllers on R-Car Gen2/Gen3 SoCs can make use of the IOMMU,
so add the missing iommus property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/2ca890323477a21c22e13f6a1328288f4ee816f9.1729868894.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add compatible strings for the twelve different lan969x targets that we
support. Either a sparx5-switch or lan9691-switch compatible string
provided on their own, or any lan969x-switch compatible string with a
fallback to lan9691-switch.
Also, add myself as a maintainer.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-13-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Currently there's one conflict in
Documentation/networking/net_cachelines/net_device.rst. To fix that
just remove the iw_public_data line:
https://lore.kernel.org/all/20241011121014.674661a0@canb.auug.org.au/
And when net is merged to net-next there will be another simple
conflict in in net/mac80211/cfg.c:
https://lore.kernel.org/all/20241024115523.4cd35dde@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcbz9YRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsabQf8CWJ/kyonw/Z8hRxgfE/7D6Jiqoq7R+ML
8W8lbc6F5wra4eCBq/oo6UVV36Ss6mxQYcRcmLq+nCkXa4qdMpg/z55QECMHxx5Z
YnIBbD2vBrIj7W21gfCKH1WJ+b5IQFZl3zuxuCgXjxD9TJM2CjUfOkvrhrqqzrPn
clfUx5f01vfv2jdvClPR5977gFE5One/ANeRQNs7uDS0TeeD2P+61DEB1//htIJo
7GwwCyUJCeOcfWRMzQwhpoppWKcPAV70kSVJrl/fRstS68vQGSQbcx9yiNeWkSFw
JXjQGdc8eYLPzLqECwS0KwFkta6AXbafAYYXe1wdlAzr+kmJ9x5oqA==
=x+mr
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PN553 is another NFC chip from NXP, document the compatible in the
bindings.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241020205615.211256-2-danila@jiaxyga.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Document compatible string for the WILC3000 chip. The chip is similar
to WILC1000, except that the register layout is slightly different and
it does not support WPA3/SAE.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-1-marex@denx.de
Per the RMII specification, the REF_CLK is sourced from MAC to PHY
or from an external source. But for TJA11xx PHYs, they support to
output a 50MHz RMII reference clock on REF_CLK pin. Previously the
"nxp,rmii-refclk-in" was added to indicate that in RMII mode, if
this property present, REF_CLK is input to the PHY, otherwise it
is output. This seems inappropriate now. Because according to the
RMII specification, the REF_CLK is originally input, so there is
no need to add an additional "nxp,rmii-refclk-in" property to
declare that REF_CLK is input.
Unfortunately, because the "nxp,rmii-refclk-in" property has been
added for a while, and we cannot confirm which DTS use the TJA1100
and TJA1101 PHYs, changing it to switch polarity will cause an ABI
break. But fortunately, this property is only valid for TJA1100 and
TJA1101. For TJA1103/TJA1104/TJA1120/TJA1121 PHYs, this property is
invalid because they use the nxp-c45-tja11xx driver, which is a
different driver from TJA1100/TJA1101. Therefore, for PHYs using
nxp-c45-tja11xx driver, add "nxp,rmii-refclk-out" property to
support outputting RMII reference clock on REF_CLK pin.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add s_axi_aclk AXI4 clock support. Traditionally this IP was used on
microblaze platforms which had fixed clocks enabled all the time. But
since its a PL IP, it can also be used on SoC platforms like Zynq
UltraScale+ MPSoC which combines processing system (PS) and user
programmable logic (PL) into the same device. On these platforms instead
of fixed enabled clocks it is mandatory to explicitly enable IP clocks
for proper functionality.
So make clock a required property and also define max supported clock
constraints.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1728491303-1456171-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Usually the MDI pair order reversal configuration is defined by
bootstrap pin MDI_CFG. Some designs, however, require overriding the MDI
pair order and force either normal or reverse order.
Add property 'marvell,mdi-cfg-order' to allow forcing either normal or
reverse order of the MDI pairs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/7ccf25d6d7859f1ce9983c81a2051cfdfb0e0a99.1728058550.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add fsl,pps-channel property to select where to connect the PPS signal.
This depends on the internal SoC routing and on the board, for example
on the i.MX8 SoC it can be connected to an external pin (using channel 1)
or to internal eDMA as DMA request (channel 0).
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch introduces a new `timing-role` property in the device tree
bindings for configuring the master/slave role of PHYs. This is
essential for scenarios where hardware strap pins are unavailable or
incorrectly configured.
The `timing-role` property supports the following values:
- `forced-master`: Forces the PHY to operate as a master (clock source).
- `forced-slave`: Forces the PHY to operate as a slave (clock receiver).
- `preferred-master`: Prefers the PHY to be master but allows negotiation.
- `preferred-slave`: Prefers the PHY to be slave but allows negotiation.
The terms "master" and "slave" are retained in this context to align
with the IEEE 802.3 standards, where they are used to describe the roles
of PHY devices in managing clock signals for data transmission. In
particular, the terms are used in specifications for 1000Base-T and
MultiGBASE-T PHYs, among others. Although there is an effort to adopt
more inclusive terminology, replacing these terms could create
discrepancies between the Linux kernel and the established standards,
documentation, and existing hardware interfaces.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We eventually want to get to a place where we fix all DTS files
so that we can simply disallow switch/port/ports without the
ethernet-* prefix so the DTS files are more readable.
Replace:
- switch with ethernet-switch
- ports with ethernet-ports
- port with ethernet-port
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20241004-realtek-bindings-fixup-v2-1-667afa08d184@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
- mac802154: fix potential RCU dereference issue in mac802154_scan_worker
- eth: fec: restart PPS after link state change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=cq2I
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.
There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:
Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short
To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.
Fixes: cbb1ca6d5f ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki <ravikanth.tuniki@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Describe the inputs from the PMU of the ath11k module on WCN6855.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240814082301.8091-1-brgl@bgdev.pl
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1. Sorry for the delay, conference travel for the past two
weeks has this and my other pull requests showing up real late
in the cycle.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem updates
all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
mLXk2wxl5+dt/dfNgZIp
=x5HV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260,
ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled
-----BEGIN PGP SIGNATURE-----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=a3qP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
Not only AP6275P Wi-Fi device but also all Broadcom wireless devices allow
external low power clock input. In DTS the clock as an optional choice in
the absence of an internal clock.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-2-9d80fea5326d@wesion.com
It's the device id used by AP6275P which is the Wi-Fi module
used by Rockchip's RK3588 evaluation board and also used in
some other RK3588 boards.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-1-9d80fea5326d@wesion.com
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
-----BEGIN PGP SIGNATURE-----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=ZAan
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bootloader-backdoor-gpio (along with reset-gpio) is used to enable
bootloader backdoor for flashing new firmware.
The pin and pin level to enable bootloader backdoor is configured using
the following CCFG variables in cc1352p7:
- SET_CCFG_BL_CONFIG_BL_PIN_NO
- SET_CCFG_BL_CONFIG_BL_LEVEL
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240903-beagleplay_fw_upgrade-v4-1-526fc62204a7@beagleboard.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller
(MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
integrated into the LAN8650/1. The communication between the Host and the
MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
Interface (TC6).
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-15-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "amlogic,tx-delay-ns" property schema has unnecessary type reference
as it's a standard unit suffix, and the constraints are in freeform
text rather than schema.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20240909172342.487675-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535 ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add binding document for Amlogic Bluetooth chipsets attached over UART.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbYV0kTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28by1LB/sHoXO3xuCLnt8fWe0EgbukmuXY93n+
vy2A4FzxS3Zg2M2Floc1k5gY5QNPE6IfpZoZnwn21L6KdO4b4Nkancr3jo8YL09O
o4v2mcGNWmPIx8t63ni3TLe/SfuxFRlEidfVdGLWhNDygtC6QgUdnozqi6ssD0UY
jHAKFgclgnx9kU6+v4/isvYEQOTauTjwdAUqITeN17ZLC5KJ44Os4WOIF0XSXrGi
/LTHtbfBZtVxv6F8kIc8vh9/WrdnqluL9RaZq+bt/tZNkqwK+BPkT0lWsJ2vCinn
arEORIDCYCv75trakUwnSuPZVOAN6FS2Xe2Qmd3IVAwEvX8aK8vf9lKO
=PtSf
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/20240904130256.1965582-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert binding doc marvel-8xxx.txt to yaml format.
Additional change:
- Remove marvell,caldata_00_txpwrlimit_2g_cfg_set in example.
- Remove mmc related property in example.
- Add wakeup-source property.
- Remove vmmc-supply and mmc-pwrseq.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: /soc@0/bus@30800000/mmc@30b40000/wifi@1:
failed to match any schema with compatible: ['marvell,sd8997']
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240820142143.443151-1-Frank.Li@nxp.com
Convert binding doc microchip,mcp251x.txt to yaml.
Additional change:
- add ref to spi-peripheral-props.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dtb: /bus@5a000000/spi@5a020000/can@0:
failed to match any schema with compatible: ['microchip,mcp2515']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240814164407.4022211-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Document support for the CAN-FD Interface on the Renesas R-Car V4M
(R8A779H0) SoC, which supports up to four channels.
The CAN-FD module on R-Car V4M is very similar to the one on R-Car V4H,
but differs in some hardware parameters, as reflected by the Parameter
Status Information part of the Global IP Version Register. However,
none of this parameterization should have any impact on the driver, as
the driver does not access any register that is impacted by the
parameterization (except for the number of channels).
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
[geert: Clarify R-Car V4M differences]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/68b5f910bef89508e3455c768844ebe859d6ff1d.1722520779.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
KSZ8895/KSZ8864 is a switch family developed before KSZ8795 and after
KSZ8863, so it shares some registers and functions in those switches.
KSZ8895 has 5 ports and so is more similar to KSZ8795.
KSZ8864 is a 4-port version of KSZ8895. The first port is removed
while port 5 remains as a host port.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/BYAPR11MB3558FD0717772263FAD86846EC8B2@BYAPR11MB3558.namprd11.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a rockchip,rk3576-gmac compatible for supporting the 2 gmac
devices on the rk3576.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240823141318.51201-3-detlev.casanova@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TPS23881 has an active-low reset pin that can be connected to an
SoC. Document this with the device-tree binding.
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240822220100.3030184-2-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names and reset-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240818172905.121829-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks, clock-names, interrupts and interrupt-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240818172905.121829-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240818172905.121829-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each variable-length property like interrupts must have fixed
constraints on number of items for given variant in binding. The
clauses in "if:then:" block should define both limits: upper and lower.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240818172905.121829-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-5-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Some Bluetooth devices bindings are in net/ and some are in
net/bluetooth/, so bring some consistency by putting everything in
net/bluetooth. Rename few bindings to match preferred naming
style: "vendor,device".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-3-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Change mdio.yaml nodename match pattern to
'^mdio(-(bus|external))?(@.+|-([0-9]+))$'
Fix mdio.yaml wrong parser mdio controller's address instead phy's address
when mdio-mux exista.
For example:
mdio-mux-emi1@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio@20 {
reg = <0x20>;
^^^ This is mdio controller register
ethernet-phy@2 {
reg = <0x2>;
^^^ This phy's address
};
};
};
Only phy's address is limited to 31 because MDIO bus definition.
But CHECK_DTBS report below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: mdio-mux-emi1@54:
mdio@20:reg:0:0: 32 is greater than the maximum of 31
The reason is that "mdio-mux-emi1@54" match "nodename: '^mdio(@.*)?'" in
mdio.yaml.
Change to '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' to avoid wrong match
mdio mux controller's node.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240815163408.4184705-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add microchip,pme-active-high property to set the PME (Power
Management Event) pin polarity for Wake on Lan interrupts.
Note that the polarity is active-low by default.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240813142750.772781-2-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240812165041.3815525-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Replace additionalProperties with unevaluatedProperties because it have
allOf: $ref: ethernet-controller.yaml#.
Remove all properties, which already defined in ethernet-controller.yaml.
Fixed below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb:
fsl-mc@80c000000: dpmacs:ethernet@11: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240811184049.3759195-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert binding doc maxim,ds26522.txt to yaml format.
Additional changes
- Remove spi-max-frequency because ref to
/schemas/spi/spi-peripheral-props.yaml
- Add address-cells and size-cells in example
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/spi@2100000/slic@2: failed to match any schema with compatible: ['maxim,ds26522']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240809143208.3447888-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The flexcan in iMX95 is not compatible with imx93 because wakeup method is
difference. Make fsl,imx95-flexcan not fallback to fsl,imx93-flexcan.
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20240731-flexcan-v4-1-82ece66e5a76@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add common 'can-transceiver' children node for fsl,flexcan.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: can@2180000: 'can-transceiver' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20240629021754.3583641-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add documentation for the built-in switch which can be found in the
Airoha EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a schema validator to vitesse,vsc73xx.yaml for MAC-level RGMII delays
in the CPU port. Additionally, valid values for VSC73XX were defined,
and a common definition for the RX and TX valid range was created.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmaWf6sACgkQUa+KL4f8
d2HhAw//UMujhKk/IfzGck3RoaKH3H22oVpd98BpzJCZBKSpl9pGsumHCicBMVAK
gp8SuwKNCAX+Fa/TubHz0xH6FWxLFXezh5DvO1t1DrPNokG+u4QPTfgMJ1IfBMHO
w7aL74rtJEyWBeod4+qNVoq6KNDaWjiWQlxGQ+9IoSNmxSTL6pkYMqo935RnqhRr
nm2TfSOIshk4tiO9tVA1ecCgjVwsG51803hypmd1AH6qBb7JsY6k1HWukLGaqUiV
+57oQzCTPIRYJhYdca06xi4ZmPg2kmoYKlxqW5ExyM7Mxs9aZZzwwZ7929LKXC6o
ebAPDc3auoww7B5mHbbVuBj0gDZKtfXpBRKSHLNtmhi0xmjnwZxQIumkpVGQALkI
0TQffgYVU4O7IXsAZG9w5igyMzEo9SZJMyrfFaQ0iB3rx5bXuh4b6btfewAkyI1H
+o3Yjymf4CR1trY9qnWCGWM/COQLIiGRhsk/RqGjy0xtpQo1Skx+AIkc6QD2zl6Y
ohC0JzEWTQe7c1DOM3SLpNoCb/GbFpVi0RrXRVfRltPHpVb/r54Zlbo+PrCaC8FB
EkU+86XbxGMh7hLtz5yhmnNCWKHQ6jbaFESwtZLo4d42CKvZaobL4xVCL56OntsH
ikmTNG+X0mUAZiCwGgK5OhEVCAtCcjRtz1U93wgDBaz7Y39z+yM=
=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
-----BEGIN PGP SIGNATURE-----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=rQ2W
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/20240715142543.303944-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the inputs from the host and instead expect the Bluetooth node to
consume the outputs of the internal PMU. This model is closer to reality
than how we represent it now.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This helps validating DTS files. Introduced changes:
1. Dropped serial details from example
2. Added required example include
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
QCA6390 has a compatible listed in the bindings but is missing the
regulators description. Add the missing supply property and list the
required ones in the allOf section.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).
Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-4-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a new optional device tree property called firware-name.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmaPsBQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt9EQf/Wevf/RnKyHhcuW4kmv0cxnjLW39K7CAh
ZlfN2JNTsVk4Na1EBjUgVyAWGdnGQpEhQlJYDExHcf5iD12pMVMIAQS8JXTDxuva
+ErAN1652p2N8nFCkNNuGbjYfO0D61xSIQj2uHhAlafK2k8FwnSn6XPP6jjHWvur
Acmw6W6l8eL+MP2K1VN2/2S09Gr6IQs7gXgWQX/6CaoK+OynFbUg8T9GQ2aqjr+d
lD17YB+oOHNCBxvg9LtBhKdfV14OBkKT6hW+YEqsrBEbx3N07ogDkPO0NUUPMXN3
IePEhj4XXrJ5UBMTvgWzNG9CwPeZFwuKGga+HZO9RKF5rwu42LsUMA==
=MpwE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert enetc device binding file to yaml. Split to 3 yaml files,
'fsl,enetc.yaml', 'fsl,enetc-mdio.yaml', 'fsl,enetc-ierb.yaml'.
Additional Changes:
- Add pci<vendor id>,<production id> in compatible string.
- Ref to common ethernet-controller.yaml and mdio.yaml.
- Add Wei fang, Vladimir and Claudiu as maintainer.
- Update ENETC description.
- Remove fixed-link part.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240709214841.570154-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8211F PHY does support LED configuration, document support
for LEDs in the binding document.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240708211649.165793-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
