Document support for the VIN module in the Renesas V4M (r8a779h0) SoC.
This device is compatible with the VIN module on the other Gen4 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240704161620.1425409-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The Gen4 SoCs V3U, V4H and V4M have a similar video capture pipelines.
The datasheets for the SoCs have small nuances around the Pre-Clip
registers ELPrC and EPPrC in three use-cases, interlaced images,
embedded data and RAW8 input. On V4H the values written to the registers
are based on odd numbers while on V4M they are even numbers, values are
based on the input image size. No board that uses these SoCs which also
have the external peripherals to test these nuances exists. Most likely
this is an issue in the datasheet.
Before adding bindings for V4M add a family compatible fallback for
Gen4. That way the driver only needs to be updated once for Gen4, and we
still have the option to fix any problems in the driver if any testable
differences between the SoCs are found.
There are already DTS files using the V3U and V4H compatibles which need
to be updated to not produce a warning for DTS checks. The driver also
needs to keep the compatible values to be backward compatible , but for
new Gen4 SoCs such as V4M we can avoid this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240704161620.1425409-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
make dt_binding_check:
field-active-even: missing type definition
The property is named "field-even-active", not "field-active-even".
Fixes: 3ab7801dfa ("media: dt-bindings: media: rcar-vin: Describe optional ep properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c999eef0a14c8678f56eb698d27b2243e09afed4.1696328563.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Document support for the VIN module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Enable yamllint to check the preferred commenting style of requiring a
space after a comment character '#'. Fix the cases in the tree which
have a warning with this enabled. Most cases just need a space after the
'#'. A couple of cases with comments which were not intended to be
comments are revealed. Those were in ti,sa2ul.yaml, ti,cal.yaml, and
brcm,bcmgenet.yaml.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230303214223.49451-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Refine reserved memory nomap handling
- Merge some PCI and non-PCI address handling implementations
- Simplify of_address.h header ifdefs
- Improve printk handling of some 64-bit types
- Convert Arm ccree, Zynq FPGA, ZynqMP RTC, Arm VIC, adi,adv7511, TI
AM56 PCI, Aspeed I2C, arm,sbsa-gwdt, MTD physmap, virtio-mmio, Arm
SCMI, Arm/Amlogic SCPI, TI OMAP mailbox, NXP pcf8563/pcf85263/pcf85363,
Mediatek RNG, Arm SCU, Arm TWD timer, Broadcom iProc PWM, Renesas TPU,
Tegra20 EMC, MDIO GPIO, renesas,r9a06g032-sysctrl, renesas,emev2-smu,
sysc-rmobile, linaro,optee-tz, and TI SCI bindings to DT schema
- Convert mux and mux controller bindings to schema. This includes MDIO
IIO, and I2C muxes.
- Add Arm PL031 RTC binding schema
- Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd
- Fix some stale doc references
- Remove stale property-units.txt. Superseded by schema in dt-schema
repo.
- Fixes for 'unevaluatedProperties' handling (enabled with experimental
json-schema support)
- Drop redundant usage of minItems and maxItems across the tree
- Update some examples to use bindings with a schema
-----BEGIN PGP SIGNATURE-----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=MDNZ
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refine reserved memory nomap handling
- Merge some PCI and non-PCI address handling implementations
- Simplify of_address.h header ifdefs
- Improve printk handling of some 64-bit types
- Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
to DT schema
- Convert mux and mux controller bindings to schema. This includes MDIO
IIO, and I2C muxes.
- Add Arm PL031 RTC binding schema
- Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd
- Fix some stale doc references
- Remove stale property-units.txt. Superseded by schema in dt-schema
repo.
- Fixes for 'unevaluatedProperties' handling (enabled with experimental
json-schema support)
- Drop redundant usage of minItems and maxItems across the tree
- Update some examples to use bindings with a schema
* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
dt-bindings: display: renesas,du: Fix 'ports' reference
dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
dt-bindings: crypto: ccree: Convert to json-schema
dt-bindings: fpga: zynq: convert bindings to YAML
dt-bindings: rtc: zynqmp: convert bindings to YAML
dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
of: of_reserved_mem: mark nomap memory instead of removing
of: of_reserved_mem: only call memblock_free for normal reserved memory
dt-bindings: Drop redundant minItems/maxItems
dt-bindings: spmi: Correct 'reg' schema
of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
dt-bindings: clk: vc5: Fix example
dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
of: Remove superfluous casts when printing u64 values
of: Fix truncation of memory sizes on 32-bit platforms
dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
dt-bindings: pwm: Use examples with documented/matching schema
...
In testing out under development json-schema 2020-12 support, there's a
few issues with 'unevaluatedProperties' and the graph schema. If
'graph.yaml#/properties/port' is used, then neither the port nor the
endpoint(s) can have additional properties. 'graph.yaml#/$defs/port-base'
needs to be used instead.
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210623164344.2571043-1-robh@kernel.org
Add the compatible string for M3-W+ (r8a77961) to the list of supported
SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document support for the VIN module in the Renesas V3U (r8a779a0) SoC.
The V3U is different from other SoCs as it have 32 instead of 8 (most of
Gen3) or 16 (V3H) VIN instances. The VIN instances are also connected to
a new IP the R-Car ISP Channel Selector.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The "resets" property is not present on R-Car Gen1 SoCs.
Supporting it would require migrating from renesas,cpg-clocks to
renesas,cpg-mssr.
Fixes: 905fc6b1bf ("dt-bindings: rcar-vin: Convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/217c8197efaee7d803b22d433abb0ea8e33b84c6.1619700314.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Now that we have graph and video-interfaces schemas, rework the media
related schemas to use them.
Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add compatible string for r8a7742. No driver change is needed as
"renesas,rcar-gen2-vin" will activate the right code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.
The easiest fix in most cases is to change the 'reg' property to for 1 cell
address and size. In some cases with child devices having 2 cells, that
doesn't make sense so a bus node is needed.
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>
Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Renesas R-Car VIN bindings documentation to json-schema.
As the examples in the bindings now can be tested add a new one which
describes how the both a parallel and a CSI-2 source can be connected on
Gen3 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
