Add a new compatible string for Andes QiLai PLIC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-4-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SG2044 implement a standard T-HEAD C900 PLIC, which is
already supported by the kernel.
Add compatible string for Sophgo SG2044 plic.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Jisheng Zhang <jszhang@kernel.org> says:
Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.
Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.
This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc848 ("MAINTAINERS: re-sort
all entries and fields").
Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230320233928.2920693-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Sagar's email listed in maintainers is bouncing as his division was sold
off by the company. I attempted to contact him some days ago on what the
bounce email told me was his new contact information, but am yet to
receive a response.
Paul and Palmer are listed on each of the bindings, both of whom were
alive & well as of Wednesday so the bindings remain maintained.
CC: Sagar Kadam <sagar.kadam@openfive.com>
CC: Sagar Kadam <sagar.kadam@sifive.com>
Link: https://lore.kernel.org/all/785425ca-4000-a7e4-16d6-4d68c91b158d@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230217180035.39658-1-conor@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
While "real" hardware might not use the compatible string "riscv,plic0"
it is present in the driver & QEMU uses it for automatically generated
virt machine dtbs. To avoid dt-validate problems with QEMU produced
dtbs, such as the following, add it to the binding.
riscv-virt.dtb: plic@c000000: compatible: 'oneOf' conditional failed, one must be fixed:
'sifive,plic-1.0.0' is not one of ['sifive,fu540-c000-plic', 'starfive,jh7100-plic', 'canaan,k210-plic']
'sifive,plic-1.0.0' is not one of ['allwinner,sun20i-d1-plic']
'sifive,plic-1.0.0' was expected
'thead,c900-plic' was expected
riscv-virt.dtb: plic@c000000: '#address-cells' is a required property
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220823183319.3314940-3-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V PLIC specification unfortunately allows PLIC implementations
to ignore edges seen while an edge-triggered interrupt is being handled:
Depending on the design of the device and the interrupt handler,
in between sending an interrupt request and receiving notice of its
handler’s completion, the gateway might either ignore additional
matching edges or increment a counter of pending interrupts.
Like the NCEPLIC100, the T-HEAD C900 PLIC also has this behavior. Thus
it also needs to inform software about each interrupt's trigger type, so
the driver can use the right interrupt flow.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-4-samuel@sholland.org
Renesas RZ/Five (R9A07G043) SoC is equipped with NCEPLIC100 RISC-V
platform level interrupt controller from Andes Technology. NCEPLIC100
ignores subsequent EDGE interrupts until the previous EDGE interrupt is
completed, due to this issue we have to follow different interrupt flow
for EDGE and LEVEL interrupts.
This patch documents Renesas RZ/Five (R9A07G043) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-2-samuel@sholland.org
Add the compatible string "thead,c900-plic" to the riscv plic
bindings to support allwinner d1 SOC which contains c906 core.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Samuel Holland <samuel@sholland.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220130135634.1213301-2-guoren@kernel.org
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
-----BEGIN PGP SIGNATURE-----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=0mrS
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
To improve human readability and enable automatic validation, the tuples
in "interrupts-extended" properties should be grouped using angle
brackets.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/211705e74a2ce77de43d036c5dea032484119bf7.1643360419.git.geert@linux-m68k.org
The number of interrupts lacks an upper bound, thus assuming one,
causing properly grouped "interrupts-extended" properties to be flagged
as an error by "make dtbs_check".
Fix this by adding the missing "maxItems", using the architectural
maximum of 15872 interrupts.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/f73a0aead89e1426b146c4c64f797aa035868bf0.1643360419.git.geert@linux-m68k.org
Add the compatible string "canaan,k210-plic" to the Sifive plic bindings
to indicate the use of the "sifive,plic-1.0.0" IP block in the Canaan
Kendryte K210 SoC. The description is also updated to reflect this
change, that is, that SoCs from other vendors may also use this plic
implementation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
