This change adds the AD7607, AD7608 & AD7609 parts to the binding doc of
the ad7606 driver.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-5-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The opt3002 is a Light-to-Digital Sensor by TI with support for wide-range
spectrum light. It shares most properties with their opt3001 model with
the exception of having a wide spectral bandwidth, ranging from 300 nm
to 1000 nm.
Add the compatible string of opt3002.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Link: https://patch.msgid.link/20241003-add_opt3002-v4-1-c550dc4591b4@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ad7380-4 is the only device from ad738x family that doesn't have an
internal reference. Moreover its external reference is called REFIN in
the datasheet while all other use REFIO as an optional external
reference. If refio-supply is omitted the internal reference is
used.
Fix the binding by adding refin-supply and makes it required for
ad7380-4 only.
Fixes: 1a291cc8ee ("dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-1-f0cefe1b7fa6@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
family with eight full Σ-Δ ADCs on chip and ultra-low input
current to allow direct sensor connection.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241014143204.30195-2-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the required properties for iio-backend support, as well as an
example and the conditions to mutually exclude interruption and
conversion trigger with iio-backend.
The iio-backend's function is to controls the communication, and thus the
interruption pin won't be available anymore.
As a consequence, the conversion pin must be controlled externally since
we will miss information about when every single conversion cycle (i.e
conversion + data transfer) ends, hence a PWM is introduced to trigger
the conversions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-2-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The documentation is erroneously stating that spi-cpha is required, and
the example is erroneously setting both spi-cpol and spi-cpha. According
to the datasheet, only cpol should be set.
On zedboard for instance, setting the devicetree as in the example will
simply not work.
Fixes: 416f882c3b ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Fixes: 6e33a125df ("dt-bindings: iio: adc: Add docs for AD7606 ADC")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-1-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
add devicetree binding for Bosch imu smi240.
The smi240 is a combined three axis angular rate and
three axis acceleration sensor module.
* The smi240 requires VDD and VDDIO
* Provides only spi interface.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shen Jianping <Jianping.Shen@de.bosch.com>
Link: https://patch.msgid.link/20241018135234.5446-2-Jianping.Shen@de.bosch.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The veml7700 contains the same chip as the veml6030 in a different
package with no interrupt line and no pin to select the I2C address,
which makes it suitable to be supported by the same bindings.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241007-veml7700-v1-2-fb85dd839d63@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a binding specification for the Analog Devices Inc. AD7625,
AD7626, AD7960, and AD7961 ADCs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://patch.msgid.link/20240909-ad7625_r1-v5-1-60a397768b25@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The veml6035 is a similar ambient light sensor to the veml6030, and
from the bindings point of view, it shares the same properties. Its
only difference in that respect is a different I2C address.
Estend the existing bindings to support the veml6035 ALS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-8-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add vdd-supply to account for the sensor's power source.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241001-veml6035-v3-3-d789f6ff147c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241003114641.672086-3-herve.codina@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This UVA device with I2C has the same properties as the veml6075, and
the same dt-bindings can cover it too.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240929-veml6070-cleanup-v1-5-a9350341a646@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IAM-20680HT & HP are 2 variants of IAM-20680 that are backwards compatible.
They just have better specs, temperature range and a bigger FIFO.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240923-inv-mpu6050-add-iam20680-ht-hp-v2-1-48290e0b9931@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver will support the AD7606C-16 and AD7606C-18.
This change adds the compatible strings for these devices.
The AD7606C-16,18 channels also support these (individually configurable)
types of channels:
- bipolar single-ended
- unipolar single-ended
- bipolar differential
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Link: https://patch.msgid.link/20240919130444.2100447-8-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some ADCs have channels with negative and positive inputs, which can be
used to measure differential voltage levels. These inputs/pins are
dedicated (to the given channel) and cannot be muxed as with other ADCs.
For those types of setups, the 'diff-channels' property can be specified to
be used with the channel number (or reg property) for both negative and
positive inputs/pins.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Link: https://patch.msgid.link/20240919130444.2100447-7-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The SARADC on the Amlogic Meson8 SoC also requires the amlogic,hhi-sysctrl,
property, document it by adding the amlogic,meson8-saradc compatible in the
adequate allOf:if:compatible:contains:enums along meson8b and meson8m2.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240911-topic-amlogic-arm32-upstream-bindings-fixes-amlogic-hhi-sysctrl-v1-1-b8c3180b2fba@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds the bindings documentation for the 14-bit
High Voltage, High Current, Waveform Generator
Digital-to-Analog converter.
Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20240912095435.18639-2-Mariel.Tinaco@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Follow the common pattern manufacturer,devicename.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240913-veml6035-v1-1-0b09c0c90418@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree bindings for the bmi270 IMU
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240912210749.3080157-2-lanzano.alex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
TMP006 sensor has a DRDY (data ready) active-low interrupt which
indicates that a new measurement is ready to be read.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240908172153.177406-3-apokusinski01@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit adds bindings support for AD4113.
The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital
converter (ADC) that integrates an analog front end (AFE) for four
fully differential or eight single-ended inputs.
Added ad4113 to the compatible list and the "avdd2-supply: false"
restriction.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://patch.msgid.link/20240812-ad4113-v3-1-046e785dd253@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
adi,ad5686.yaml and adi,ad5696.yaml duplicate all the I2C device
compatible strings with the exception of "adi,ad5337r". Since
adi,ad5686.yaml references spi-peripheral-props.yaml, drop the I2C
devices from it making it only SPI devices. Update the titles to make
the distinction clear.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240910234440.1045098-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1. Sorry for the delay, conference travel for the past two
weeks has this and my other pull requests showing up real late
in the cycle.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem updates
all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
mLXk2wxl5+dt/dfNgZIp
=x5HV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260,
ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmbrSpcACgkQ+vtdtY28
YcNpOw//WUD4C/tX8aoekeeoWo0uhCxy3IWzqNFOkP1wYhI4W5Fjoy6COlO1e428
+knrEARe6fNBXa98wZo2PWC6yiHW5kFpFbf1epGCvP7O4uBZgColACnbCjtORZ5A
/k3zXj8mu3CphsuTLljM8Ap0RUwqwlhmHJAz1pQlQWslK/v/QaopXtiR4dXS5Bdw
jAGFiGDWni3NxiSPuey+1NJeY+t64AsplsCJ8a+3HIqXCxE6HohaboxIvsTaA999
tbEah4AwVv3uQzdh01tmbd4z45XbKjUBc6IscTTXbm2pdpmmCDR9K0k9kkceDDGz
7zyPf1/GGFG+RKC+irUkWHjIb89DrCUl7/DrRO1yijbTuFBktiJZ1KAVuVrmxJSd
qh359bphMOx5hbZnPMvsH3Qyb78+U5sCKIHYddzqi1l7o+kMxGE3CqZFj2fGPfiQ
W/f9ERQMwbicn0rFh/sdDf1S+QfRQQqjvfko2gjWWEUoImkuxcUiubYQi+ujnuHX
S9YGYO8siiODSrVPBKJs1ylYxBlsU4YFk2KSBLjdA3erBvGe4DeH6HozXjh6WmlN
e+/4UMoGRPeOesOHhPPqRWkgULmH7X0Ti61FNG2nnDyrt4z2auQ/UIDXj4gfFyS+
PqfPFH2N83dPaHe6PyDoeEkbqEyKI1+gNtGx/alZeMkwMkwDyfU=
=a3qP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible binding for the axp717.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20240821215456.962564-9-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree bindings for aw96103/aw96105 proximity sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: shuaijie wang <wangshuaijie@awinic.com>
Link: https://patch.msgid.link/20240827080229.1431784-2-wangshuaijie@awinic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Sophgo CV1800B SARADC is a Successive Approximation ADC that can be
found in the Sophgo CV1800B SoC.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240829-sg2002-adc-v5-1-aacb381e869b@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240818172951.121983-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree documentation for ENS210 family of temperature and
humidity sensors
Signed-off-by: Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240805-ens21x-v6-1-5bb576ef26a6@thegoodpenguin.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add rockchip,rk3576-saradc compatible string.
The saradc on RK3576 is compatible with the one on RK3588, so they are
used together in an arm of the oneOf.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240802214612.434179-5-detlev.casanova@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow to specify the reference voltage used by the SD modulator.
When the SD modulator is defined as an IIO backend, the reference
voltage can be used to evaluate scaling information of the IIO device.
The reference voltage is not used otherwise.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-7-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-6-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the DFSDM binding to use the new IIO backend framework,
along with the adoption of IIO generic channels.
This binding change allows to add scaling support to the DFSDM.
Keep the legacy binding as deprecated for backward compatibility.
The io-backends property is supported only in generic IIO channel
binding.
- Channel description with the generic binding (Audio and Analog):
Properties superseded by generic properties:
st,adc-channels: becomes "reg" property in channel node
st,adc-channel-names: becomes "label" property in channel node
Properties moved to channel child node:
st,adc-channel-types: becomes st,adc-channel-type
st,adc-channel-clk-src, st,adc-alt-channel
- Analog binding:
DFSDM filter channel is configured as an IIO backend consumer.
Add io-backends property in channel child nodes.
DFSDM is no more configured as a channel consumer from SD modulator.
Use of io-channels in DFSDM node is deprecated.
- Audio binding:
DFSDM audio DAI is configured as a channel consumer from DFSDM filter.
No change compare to legacy.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-5-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97f ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding ad7386/7/8 single-ended compatible parts, and the corresponding
ad7386-4/7-4/8-4 4 channels.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-1-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for configuring the idle state of the MOSI signal in
controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmapf2oACgkQJNaLcl1U
h9BfoAgAhwBxDk6EmQdET9JM7Awv8EF4DhfirzMdR9Gp0v/fyVu/rQXPFYtxIzD4
w9d+1M6+GLXOhg8MFe427XZHEpJdcJ/kVU8bhXHXh0tr++OLBAxUxIMsuga5adUV
hyyowDq7VlL60ayfh92OxFza8ayj27MS37o3BRcKuLa5oRgVcvQegKCO+6YTlqfX
ahpDCzoneolFdpXEwdDMStB8Gq9PPaHC6A1Yp5rspLxg9w45WAUwn7IqSH8CE3l9
LPwjqu3CTLQoIoDOUQzUPVo1buf9hzqzsEcaIKHcOirT0xizpG6oLuIRV25q5+kG
nfcN6Q9eUBfz032+QTcOR+v2iWPG2A==
=rMeU
-----END PGP SIGNATURE-----
Merge tag 'spi-mosi-config' into togreg
spi: Support MOSI idle configuration
Add support for configuring the idle state of the MOSI signal in
controllers.
The adf4378 provides only one output channel. Therefore there is only
one gpio available to enable the output. Reflect that into the bindings
using property conditions.
Add product link for the adf4378.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240729095047.25040-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite
being marketed as a proximity sensor, it also appears to have ambient
light sensing capabilities.
The part is fully compatible with the existing implementation of the
device driver. Add the compatible string of stk3013 to the existing
list, with a fallback of stk3310.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240727-stk3310-v4-3-02497b1407ba@disroot.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sensirion SDP500 is a digital differential pressure sensor. It provides
a digital I2C output. Add devicetree bindings requiring the compatible
string and I2C slave address (reg).
Signed-off-by: Petar Stoykov <pd.pstoykov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20240725-mainline_sdp500-v4-1-ea2f5b189958@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Internal clock of AD719X devices can be made available on MCLK2 pin. Add
clock provider to support this functionality when clock cells property
is present.
The clock source can be either provided externally or the internal clock
is used. Pair of clocks and clock-names property is mutally exclusive
with #clock-cells property.
Modify second example to showcase the mode where internal clock is used.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240717212535.8348-4-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.
To configure external clock as either a crystal or a CMOS-compatible
clock, changing the register settings is necessary. Therefore, add clock
name xtal alongside mclk. By selecting one or the other, the register is
configured.
The presence of an external clock source is optional, not required. When
both clocks and clock-names properties are present, an external clock
source is used. If the intention is to use the internal clock, both
properties should be absent. Modify required properties accordingly.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240717212535.8348-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the mount-matrix property, which is used in device trees such
as msm8916-samsung-fortuna-common.dtsi, and supported by the driver.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240716132512.80337-1-rayyan.ansari@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the KX022-1020 accelerometer, which has the same register
layout as the KX023-1025 and so can use the same driver.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240714173431.54332-2-rayyan@ansari.sh
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a generalized DAC binding that can be used by DACs that have
similar properties adding output-range-microamp and output-range-microvolt.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://patch.msgid.link/20240718051834.32270-4-kimseer.paller@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The BU27034NUC was cancelled before it entered mass production. It was
replaced by a new variant BU27034ANUC (note, added 'A'). The new
variant gained a few significant changes, like removal of the 3.rd data
channel and dropping some of the gain settings. This means that, from
software point of view these ICs are incompatible. Lux calculation based
on the data from the sensors needs to be done differently, and on the
BU27034ANUC the channel 3 data is missing. Also, the gain setting
differencies matter.
Unfortunately, the identification register was not changed so there is no
safe way for the software to distinguish the variants.
According to the ROHM HQ engineers, the old BU27034NUC should not be
encountered in the wild. Hence it makes sense to remove the support for
the old BU27034NUC and add support for the new BU27034ANUC. Change the
compatible in order to not load the incompatible old driver for new sensor
(or, if someone had the old sensor, the new driver for it).
Drop the compatible for old sensor which should not be in the wild and
add a new compatible for the new model with accurate model suffix
'anuc'. Rename the file to match the new compatible.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/c39f9c67b3c07a27d7a13109c7b69cff9cfd2b9b.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since the driver supports several parts that present differences in
their layout and behaviour, it is necessary to describe the differences
from one chip to another.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Example uses adi,ad7606-8 as compatible, but adi,sw-mode is not
available for it. So remove this property from example.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reword a few descriptions, and normalize the text width to 80 characters.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Normalize textwidth to 80 columns on the descriptions.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for new devices:
* Analog Devices AD9652 16-bit 310 MSPS ADC;
* Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC;
* Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC.
Note all these parts have subtle differences in their programming model
(different scales, number of channels, etc..) so fallbacks are not
possible.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-4-f1adfee921f7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The 'single-channel' property is an uint32, not an array, so 'items' is
an incorrect constraint. This didn't matter until dtschema recently
changed how properties are decoded. This results in this warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7192.example.dtb: adc@0: \
channel@1:single-channel: 1 is not of type 'array'
Fixes: caf7b7632b ("dt-bindings: iio: adc: ad7192: Add AD7194 support")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240723230904.1299744-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new
Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI
DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2
blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'
-----BEGIN PGP SIGNATURE-----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=tjMz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
Emails to Anson Huang bounce:
Diagnostic-Code: smtp; 550 5.4.1 Recipient address rejected: Access denied.
Add IMX platform maintainers for bindings which would become orphaned.
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for I2C
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240617065828.9531-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a new binding for the MT6350 Series (MT6357/8/9) PMIC AUXADC,
providing various ADC channels for both internal temperatures and
voltages, audio accessory detection (hp/mic/hp+mic and buttons,
usually on a 3.5mm jack) other than some basic battery statistics
on boards where the battery is managed by this PMIC.
Also add the necessary dt-binding headers for devicetree consumers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7606-8 is referred to as AD7606 by Analog Devices. This comment aims
to avoid confusion. Also the compatible names were not sorted by
alphabetical order.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240628-cleanup-ad7606-v2-2-96e02f90256d@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix warnings on DFSDM dtbs check
Unevaluated properties are not allowed ('dfsdm-dai' was unexpected)
'port' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: 11183ac07a ("dt-bindings: stm32: convert dfsdm to json-schema")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240618115912.706912-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
LIS2DS12 is an accelerometer by STMicroelectronics. It is identifiable by
its WhoAmI value 0x43.
Its register interface is not compatible with existing parts. For example:
- The full-scale values are present in register 0x20, in bits 2 and 3
(mask 0x0c). Most other supported sensors have the register address set
to 0x21, 0x23, 0x24, or 0x25. There is one sensor setting though
(bearing WhoAmI 0x3b) which has it's address set to 0x20, but the mask is
set to 0x20, not 0x0c.
- The full-scale values 2G, 4G, 8G, and 16G correspond to the register
values 0x00, 0x02, 0x03, 0x01 respectively. None of the sensor settings
have the value 0x01 associated with 16G.
Add the compatible string without any fallback.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20240622123520.39253-2-kauschluss@disroot.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for: AD4111, AD4112, AD4114, AD4115, AD4116.
AD411x family ADCs support a VCOM pin. The purpose of this pin is to
offer a dedicated common-mode voltage input for single-ended channels.
This pin is specified as supporting a differential channel with VIN10 on
model AD4116.
AD4111/AD4112 support current channels. Support is implemented using
single-channel and "adi,current-channel".
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-2-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are ADCs that are differential but support to measure single-ended
signals on the same channels by connecting a constant voltage to the
negative input pin.
This property allows to properly define a single-ended channel that
requires two inputs to be specified. Software can use the presence of
this property to mark the channel as not differential.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-1-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZvTbAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVksIAJEn4a9IVM8FNCJy
Dxo0BItD1/qJ5mLDptqUFRKlxInjbojofz5CyoeIeXb0DwRfB16ALXqNXAkd3APi
saoOpfjFsg2H2OqL9CHdkzWcJEAq2lDnL0zaOjumeDVu/EyeT+tC4e4hq1e6Bm0E
fPC5ms2b+07DF9Rg6/DW8yPbdM5n6Mz1bRd3fQOIgvpM3yGOyGztEBgTRub/ZUgH
5pNJauknFAZgdiWhgNpc+lPWYZbgHKULQPhUBPdVhDIXPtQNUlKgNTQc6+L0Nmbb
K1sG1q7FLeMJOTFGQfD4r26X5DNQUi894q/9SX8X7rcrECdJKcw2WjVyB4myADpf
ae2gP+A=
=XjWP
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rc4' into char-misc-next
We need the char-misc and iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device tree bindings for the vishay VEML6040 RGBW light sensor iio
driver
Signed-off-by: Arthur Becker <arthur.becker@sentec.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240604-veml6040-v4-2-5a4d59597874@sentec.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
TI tla2021 is a limited single-channel variant of tla2024 which is
similar enough to be easily supportable through the same driver.
Add compatible string for tla2021 so boards may describe it in
device-tree.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240602-cn9130-som-v6-3-89393e86d4c7@solid-run.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ADIS1657X family devices compatibles and specify the according
maximum SPI baudrate.
Similarly to other ADIS1650X devices, ADIS1657X supports sync-mode
values [0,2].
Each newly added device has a different angular velocity/linear
acceleration/ delta velocity scale combination, as follows:
Accel dynamic range sensitivity:
- 262144000 LSB/g: ADIS16575
- 52428800 LSB/g: ADIS16576, ADIS16577
Gyro dynamic range sensitivity:
- 2621440 LSB/deg/sec: ADIS1575-2, ADIS1576-2, ADIS1577-2
- 655360 LSB/deg/sec: ADIS1575-3, ADIS1576-3, ADIS1577-3
Delta velocity sensitivity:
- 2^15/100 LSB/m/sec: ADIS16575
- 2^15/125 LSB/m/sec: ADIS16576
- 2^15/400 LSB/m/sec: ADIS16577
Each ADIS1657X device supports FIFO usage and a sample-rate of 4.1KHz,
meanwhile the already existing devices do not support FIFO usage and
have a maximum sample-rate of 2.1KHz.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-9-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ADIS16501 compatible. Similarly to other ADIS1650X devices,
ADIS16501 supports sync-mode values [0,2].
There are two differences between ADIS16501 and ADIS16477-2:
- ADIS16501 does not support pulse sync mode
- the delta velocity scale value is different
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-2-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compatible support for ad7380/1/3/4-4 parts which are 4 channels
variants from ad7380/1/3/4
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-6-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding AD7383 and AD7384 compatible parts that are pseudo-differential.
Pseudo-differential require common mode voltage supplies, so add them
conditionally
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-3-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a binding specification for the Analog Devices Inc. AD7380
family of ADCs.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-1-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for ad3541r and ad3551r single output variants.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-3-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adi,gain-scaling-p/n values are an inverted log2,
so initial naming was set correctly, but the driver uses just
adi,gain-scaling-p/n, and if fdt is created accordingly with
the fdt bindings documentation, driver fails the probe.
Observing that:
- the Linux driver is the only consumer,
- there are no upstreamed dts nodes related to ad3552r,
the fix to the documentation side is preferred and less-risk.
Fixes: b0a96c5f59 ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-2-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Unlike the other AD719Xs, AD7194 has configurable channels. The user can
dynamically configure them in the devicetree.
Also add an example for AD7194 devicetree.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240514120222.56488-6-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Devices that have both single-ended channels and differential channels
cause a bit of confusion when the channels are configured in the
devicetree.
Clarify difference between these two types of channels for such devices
by adding single-channel property alongside diff-channels. They should
be mutually exclusive.
Devices that have only single-ended channels can still use reg property
to reference a channel like before.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240514120222.56488-5-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AINCOM should actually be a supply. AINx inputs are referenced to AINCOM
in pseudo-differential operation mode. AINCOM voltage represents the
offset of corresponding channels.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20240514120222.56488-3-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix output range, as per datasheet must be -2.5 to 7.5.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Fixes: b0a96c5f59 ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240503185528.2043127-1-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a
sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA
g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm
/HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM
PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV
Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c
uQ9ujxQ=
=M0wP
-----END PGP SIGNATURE-----
Merge 6.9-rc7 into char-misc-testing
We need the char-misc changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a required clock property as we can't access the device registers if
the AXI bus clock is not properly enabled.
Note this clock is a very fundamental one that is typically enabled
pretty early during boot. Independently of that, we should really rely on
it to be enabled.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: 96553a44e9 ("dt-bindings: iio: adc: add bindings doc for AXI ADC driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240426-ad9467-new-features-v2-3-6361fc3ba1cc@analog.com
Cc: <Stable@ver.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the GPADC for the Allwinner H616. It is identical to
the existing ADC for the D1/T113s/R329/T507 SoCs.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240417170423.20640-3-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Before all supported sensors except for MPU{9150,9250,9255} were not
allowed to use i2c-gate in the bindings which excluded quite a few
supported sensors where this functionality is supported.
Switch the list of sensors to ones where the Linux driver explicitly
disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240408-mpu6050-i2c-gate-v1-1-621f051ce7de@z3ntu.xyz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add spi-3wire because the device allows to be configured for spi 3-wire
communication.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240401194906.56810-5-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The DAC081C081 is a TI DAC whose software interface is compatible with
the DAC5571. It is the 8-bit version of the DAC121C081, already
supported by the DAC5571 bindings. Extends the bindings to support this
chip.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20240325203245.31660-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Maxim max30101 is the replacement for the max30105, which is no
longer recommended for future designs.
The max30101 does not require new properties, and it can be described
with the existing ones for the max30105, which will be used as a
fallback compatible.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240324-max30101-v2-1-611deb510c97@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The HDC3020 provides an active low reset signal that is still not
described in the bindings.
Add reset-gpios to the bindings and the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-2-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a new binding for the Analog Devices, Inc. AD7944, AD7985, and
AD7986 ADCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304-ad7944-mainline-v5-1-f0a38cea8901@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for: AD7172-2, AD7175-8, AD7177-2.
AD7172-4 does not feature an internal reference, check for external
reference presence.
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240306110956.13167-2-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include irq.h and irq level macro in the example for readability
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-4-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All devices covered by the binding have a vdd supply.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-3-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel applications
or higher speed multiplexed applications. The Sigma-Delta ADC is intended
primarily for measurement of signals close to DC but also delivers
outstanding performance with input bandwidths out to ~10kHz.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240228110622.25114-1-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The "maxim,green-led-current-microamp" property is only available for
the max30105 part (it provides an extra green LED), and must be set to
false for the max30102 part.
Instead, the max30100 part has been used for that, which is not
supported by this binding (it has its own binding).
This error was introduced during the txt to yaml conversion.
Fixes: 5a6a65b11e ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of the common spi-peripheral-props.yaml to pull in the common
spi device properties and limit the spi-max-frequency to 10 MHz as this
is the max. frequency if VDDIO >= 1.62V.
Note all listed devices can either operate in I2C or in SPI mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221174305.3423039-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Per i.MX93 Reference Mannual Rev.4, 12/2013, there is no interrupt 268,
so drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240226130826.3824251-1-peng.fan@oss.nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the support to provide an optional label like we do for ADC
channels to identify the device more easily.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226121234.545662-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Voltafield AF8133J is a simple magnetometer sensor produced by Voltafield
Technology Corp, with dual power supplies (one for core and one for I/O)
and active-low reset pin.
The sensor has configurable range 1.2 - 2.2 mT and a software controlled
standby mode.
Add a device tree binding for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222011341.3232645-3-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The VEML6075 requires a single supply to operate. The property already
exists in the bindings and it is used in the example, but it is still
not on the list of required properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-veml6075_vdd-v1-1-ac76509b1998@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222164206.65700-2-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The LTC6373 is a silicon, 3-bit Fully-Differential digital instrumentation
amplifier that supports the following programmable gains (Vout/Vin):
G = 0.25, 0.5, 1, 2, 4, 8, 16 + Shutdown.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240220153553.2432-5-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADRF5740 and HMC540S have a 4 bit parallel interface.
Update ctrl-gpios description and min/maxItems values depending on the
matched compatible to correctly reflect the hardware properties.
Fixes: 79f2ff6461 ("dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator")
Fixes: 20f87a9a26 ("dt-bindings: iio: hmc425a: add entry for HMC540S")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240220153553.2432-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready
signal which can be used for signaling to the host.
Add binding for "interrupts" property so that boards wiring this signal
may describe the connection.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240219-iio-hdc20x0-interrupt-binding-v7-1-c8ffb39c3768@solid-run.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the binding to specify the vcc supply. We can't make it required
since this would break the backward compatibility.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240219131114.134607-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bindings for the TI ADS1298 medical ADC. This device is
typically used for ECG and similar measurements. Supports data
acquisition at configurable scale and sampling frequency.
The device has so many options for connecting stuff, at this
point the bindings aren't nearly complete but partial bindings
are better than no bindings at all.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240216153020.485201-1-mike.looijmans@topic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'adi,adc-dev' is now deprecated and must not be used anymore. Hence,
also remove it from being required.
The reason why it's being deprecated is because the axi-adc CORE is now
an IIO service provider hardware (IIO backends) for consumers to make use
of. Before, the logic with 'adi,adc-dev' was the opposite (it was kind
of consumer referencing other nodes/devices) and that proved to be wrong
and to not scale.
Now, IIO consumers of this hardware are expected to reference it using the
io-backends property. Hence, the new '#io-backend-cells' is being added
so the device is easily identified as a provider.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-2-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad9467 will make use of the new IIO backend framework which is a
provider - consumer interface where IIO backends provide services to
consumers. As such, and being this device a consumer, add the new
generic io-backend property to the bindings.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-1-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable the voltage divider to both receive and provide measurement
services by adding #io-channel-cells.
This is especially valuable in scenarios where an ADC has an analog
frontend, like a voltage divider, and obtaining its raw value isn't
interesting. It is desired to get the real voltage before the voltage
divider.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240206105502.648255-1-naresh.solanki@9elements.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device bindings for asm330lhhxg1 IMU sensor.
The lsm6dsr supports the features and functionality provided by
the asm330lhhxg1 via identical interfaces and so is a suitable
fallback compatible.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/942452ec9626bc1166501cec0fa88c369e28ec6f.1706961432.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dual microwave down converter module with input RF and LO frequency
ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to
8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier
for each down conversion path.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240123081059.5746-1-kimseer.paller@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change order of properties in order for the end user to hopefully ignore
pmin-pascal and pmax-pascal which are superseded by pressure-triplet.
Add pressure-triplet property which automatically initializes
pmin-pascal and pmax-pascal inside the driver.
Rework honeywell,pmXX-pascal requirements based on feedback from
Jonathan and Conor.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231229092445.30180-3-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Define enum inside the honeywell,transfer-function property block.
Set the correct irq edge in the example block.
Based on the datasheet, in table 13 on page 11:
"End-of-conversion indicator: This pin is set high when a measurement
and calculation have been completed and the data is ready to be
clocked out"
Add description on End-of-conversion interrupt.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-2-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This device has the same properties and I2C addresses as the as73211.
The only difference between them is the photodiodes they use internally,
which in this case is irrelevant for the bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the big set of char/misc and other driver subsystem changes for
6.8-rc1. Lots of stuff in here, but first off, you will get a merge
conflict in drivers/android/binder_alloc.c when merging this tree due to
changing coming in through the -mm tree.
The resolution of the merge issue can be found here:
https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au
or in a simpler patch form in that thread:
https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com
If there are issues with the merge of this file, please let me know.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported issues
(other than the binder merge conflict.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP
YoI7f1I4GBcC0GKNfK6s
=+Kyv
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
