Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-06 04:41:28 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,382,414 Commits 7 Branches 779 Tags 4.4 GiB
loongarch-next
Commit Graph

9 Commits

Author SHA1 Message Date
Jonathan Santos
1905e6c9ce dt-bindings: iio: adc: ad7768-1: add trigger-sources property 
In addition to GPIO synchronization, The AD7768-1 also supports
synchronization over SPI, which use is recommended when the GPIO
cannot provide a pulse synchronous with the base MCLK signal. It
consists of looping back the SYNC_OUT to the SYNC_IN pin and send
a command via SPI to trigger the synchronization.

Introduce the 'trigger-sources' property to enable SPI-based
synchronization via SYNC_OUT pin, along with additional optional
entries for GPIO3 and DRDY pins.

Also create #trigger-source-cells property to differentiate the trigger
sources provided by the ADC. To improve readability, create a
adi,ad7768-1.h header with the macros for the cell values.

While at it, add description to the interrupts property.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylirbe.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/713fd786010c75858700efaec8bb285274e7057e.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-06-26 19:32:53 +01:00
Jonathan Santos
1c01c449e3 dt-bindings: iio: adc: ad7768-1: Document GPIO controller 
The AD7768-1 ADC exports four bidirectional GPIOs accessible
via register map.

Document GPIO properties necessary to enable GPIO controller for this
device.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/2ac34fc1e0b02886073ae0bb196c7e8d4d442c3f.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-06-26 19:32:53 +01:00
Jonathan Santos
81d289c21e dt-bindings: iio: adc: ad7768-1: document regulator provider property 
The AD7768-1 provides a buffered common-mode voltage output
on the VCM pin that can be used to bias analog input signals.

Add regulators property to enable the use of the VCM output,
referenced here as vcm-output, by any other device.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Link: https://patch.msgid.link/33c02a1fb9d839f62da5237f9476ccbf14271b6d.1749569957.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2025-06-26 19:32:53 +01:00
Krzysztof Kozlowski
8013738845 dt-bindings: iio: adc: use spi-peripheral-props.yaml 
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2022-08-19 19:34:16 +01:00
Rob Herring
0499220d6d dt-bindings: Add missing array size constraints 
DT properties which can have multiple entries need to specify what the
entries are and define how many entries there can be. In the case of
only a single entry, just 'maxItems: 1' is sufficient.

Add the missing entry constraints. These were found with a modified
meta-schema. Unfortunately, there are a few cases where the size
constraints are not defined such as common bindings, so the meta-schema
can't be part of the normal checks.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210104230253.2805217-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
 2021-01-11 17:42:25 -06:00
Greg Kroah-Hartman
749c1e1481 First set of new device support, features and cleanups for IIO in the 5.11 cycle 
Usual mixed bag of new drivers / device support + cleanups etc with the
 addition of a fairly big set of yaml conversions.
 
 Txt to yaml format conversions.
 In some cases dropped separate binding and moved to trivial devices (drop).
 
 Listed by manufacturer
   - dht11 temperature(drop)
   - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
     adi,adis16480 adi,adf4350
   - ams,as3935
   - asahi-kasei,ak8974
   - atmel,sama5d2-adc
   - avago,apds9300 avago,apds9960
   - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
   - brcm,iproc-static-adc
   - capella,cm36651
   - domintech,dmard06(drop)
   - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
   - hoperf,hp03
   - honeywell,hmc5843
   - kionix,kxcjk1013
   - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
     maxim,max31856 maxim,max31855k maxim,max44009
     maxim,max5481 maxim,max5821
   - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
   - mediatek,mt2701-auxadc
   - melexis,mlx90614 melexis,mlx90632
   - memsic,mmc35240(drop)
   - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
   - murata,zap2326
   - nxp,fxas21002c nxp,lpc1850-dac
   - pni,rm3100
   - qcom,pm8018-adc qcom,spmi-iadc
   - renesas,isl29501 renesas,rcar-gyroadc
   - samsung,sensorhub-rinato
   - sensiron,sgp30
   - sentech,sx9500
   - sharp,gp2ap020a00f
   - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
   - ti,adc084s021 ti,ads124s08
     ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
     ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
   - upisemi,us51882
   - vishay,vcnl4035
   - x-powers,axp209
 
 New device support
 * adi,ad5685
   - Add support for AD5338R dual output 10-bit DAC
   - Add DT-binding doc.
 * mediatek,mt6360
   - New driver for this SoC ADC with bindings and using new channel label
     support in the IIO core.
 * st,lsm6dsx
   - Add support for LSM6DST
 
 Core:
 * Add "label" to device channels, provided via a new core callback. Including
   DT docs for when that is the source, and ABI docs.
 * Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
 * dmaengine, unwrap use of iio_buffer_set_attrs()
 * Drop iio_buffer_set_attrs()
 * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
   no handler has run.
 * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
   any known existing drivers, but will impact a future one.
 * kernel-doc fix in trigger.h
 * file-ops ordering cleanup
 
 Features
 * semtech,sx9310
   - Add control of hardware gain, proximity thresholds, hysteresis and
     debounce.
   - Increase what information on hardware configuration can be provided
     via DT.
 
 Cleanup and minor features
 * adi,ad5685
   - Add of_match_table
 * adi,ad7292
   - Drop pointless spi_set_drvdata() call
 * adi,ad7298
   - Drop platform data and tidy up external reference config.
 * adi,ad7303
   - Drop platform data handling as unused.
 * adi,ad7768
   - Add new label attribute for channels provided from dt.
 * adi,ad7887
   - devm_ usage in probe simplifying remove and error handling.
 * adi,adis16201
   - Drop pointless spi_set_drvdata() call
 * adi,adis16209
   - Drop pointless spi_set_drvdata() call
 * adi,adis16240
   - White space fixup
 * adi,adxl372
   - use new devm_iio_triggered-buffer_setup_ext()
 * amlogic,meson-saradc
   - Drop pointless semicolon.
 * amstaos,tsl2563
   - Put back i2c_device_id table as needed for greybus probing.
 * atmel,at91_adc
   - Use of_device_get_match_data() instead of open coding it.
   - Constify some driver data
   - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
   - Drop platform data as mostly dead code.
   - Tidy up reference voltage logic
 * atmel-sama5d2
   - Drop a pointless semicolon
   - Merge buffer and trigger init into a separate function
   - Use new devm_iio_triggered_buff_setup_ext()
 * avago,apds9960
   - Drop a pointless semicolon
 * bosch,bmc150
   - Drop a pointless semicolon
   - Use new iio_triggered_buffer_setup_ext()
 * bosch,bmp280
   - Drop a pointless semicolon
 * fsl,mma8452
   - Constification
 * (google),cros_ec
   - Use new devm_iio_triggered_buffer_setup_ext()
 * hid-sensors
   - Use new iio_triggered_buffer_setup_ext()
 * ingenic,adc
   - Drop a pointless semicolon
 * invensense,icm426xx
   - Fix MAINTAINERS entry missing :
 * mediatek,mt6577_audxac
   - Add binding doc for mt8516 compatible with mt8173
 * motorola,cpcap-adc
   - Fix an implicit fallthrough marking that clang needs to avoid warning.
 * samsung,exynos-adc
   - Stop relying on users counter form input device in ISR.
 * st,lsm6dsx
   - add vdd and vddio regulator control (including binding update)
 * st,stm32-adc
   - Tidy up code for dma transfers.
   - Adapt clock duty cycle for proper functioning. Note no known problems
     with existing boards.
 * st,vl53l0x-i2c
   - Put back i2c_device_id table as needed for greybus probing.
 * vishay,vcnl4035
   - Put back i2c_device_id table as needed for greybus probing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl+8H3IRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogLLA//cE+rUI0ztkE5KD1DY5mu8dy3GotLJe2y
 kVlYao/8H4n3qL9Sm+i47v7pZZfB6UH5jaPa3BqXcGU3HaBaTSza5VhP/hDyfpgD
 Nt46UyE0FxcNEpwqiiyVuVFFx9ifUOayzKwL9ckyPs7n1X6ecZA+sPdmSQLmFzoZ
 IYDR148UxlAr33j7DVF1DLiIdObCIpNc3pn7YDflT/NnXvRY2XgIjqeOiPbldVgm
 8nGgeSQXTyYBKaSyv6seE2qaxyDAhjkz7SVOidWZxPgMjiJJmpRdL3yCn2wVCCCy
 eLh9Ez0zPhywOhsRImICZ9ds0+Wq1Ke2kVqo0N8FJtB+JVZig+R1ElTaUKhES7B2
 zKW1PR3nknP2oo3LWoXL6QR4vm0RcasRYnE2Qmtv6y04Hv3vbdyx6ZW+WCwrlsM8
 fCxHV/m/NN4piTHEFFFkW912GMZM4XqnJ/H4bLd4oA+HP/2vzMuzdBLKZPZRdYYf
 Xd2YTF+iyNYlbN+ZLDd9840cAcKabPsd+ptaJh7lb0MUPPcv5qukhwIBs1/vqrE6
 9/AnJ/Wj/oQZoDbcrgnMVoRn8dxqnQkd883sxiHZAvztEn1CQ9dDyUfKlHHB5BOD
 GhtrEyMn87VWM19yqArW/3ZU7dPBbXHkzlw6FQ67gIYbqaCRwfRi26FCJh0C6Kzi
 auCmjubaALo=
 =kkcj
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.11 cycle

Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.

Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).

Listed by manufacturer
  - dht11 temperature(drop)
  - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
    adi,adis16480 adi,adf4350
  - ams,as3935
  - asahi-kasei,ak8974
  - atmel,sama5d2-adc
  - avago,apds9300 avago,apds9960
  - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
  - brcm,iproc-static-adc
  - capella,cm36651
  - domintech,dmard06(drop)
  - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
  - hoperf,hp03
  - honeywell,hmc5843
  - kionix,kxcjk1013
  - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
    maxim,max31856 maxim,max31855k maxim,max44009
    maxim,max5481 maxim,max5821
  - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
  - mediatek,mt2701-auxadc
  - melexis,mlx90614 melexis,mlx90632
  - memsic,mmc35240(drop)
  - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
  - murata,zap2326
  - nxp,fxas21002c nxp,lpc1850-dac
  - pni,rm3100
  - qcom,pm8018-adc qcom,spmi-iadc
  - renesas,isl29501 renesas,rcar-gyroadc
  - samsung,sensorhub-rinato
  - sensiron,sgp30
  - sentech,sx9500
  - sharp,gp2ap020a00f
  - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
  - ti,adc084s021 ti,ads124s08
    ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
    ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
  - upisemi,us51882
  - vishay,vcnl4035
  - x-powers,axp209

New device support
* adi,ad5685
  - Add support for AD5338R dual output 10-bit DAC
  - Add DT-binding doc.
* mediatek,mt6360
  - New driver for this SoC ADC with bindings and using new channel label
    support in the IIO core.
* st,lsm6dsx
  - Add support for LSM6DST

Core:
* Add "label" to device channels, provided via a new core callback. Including
  DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
  no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
  any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup

Features
* semtech,sx9310
  - Add control of hardware gain, proximity thresholds, hysteresis and
    debounce.
  - Increase what information on hardware configuration can be provided
    via DT.

Cleanup and minor features
* adi,ad5685
  - Add of_match_table
* adi,ad7292
  - Drop pointless spi_set_drvdata() call
* adi,ad7298
  - Drop platform data and tidy up external reference config.
* adi,ad7303
  - Drop platform data handling as unused.
* adi,ad7768
  - Add new label attribute for channels provided from dt.
* adi,ad7887
  - devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
  - Drop pointless spi_set_drvdata() call
* adi,adis16209
  - Drop pointless spi_set_drvdata() call
* adi,adis16240
  - White space fixup
* adi,adxl372
  - use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
  - Drop pointless semicolon.
* amstaos,tsl2563
  - Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
  - Use of_device_get_match_data() instead of open coding it.
  - Constify some driver data
  - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
  - Drop platform data as mostly dead code.
  - Tidy up reference voltage logic
* atmel-sama5d2
  - Drop a pointless semicolon
  - Merge buffer and trigger init into a separate function
  - Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
  - Drop a pointless semicolon
* bosch,bmc150
  - Drop a pointless semicolon
  - Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
  - Drop a pointless semicolon
* fsl,mma8452
  - Constification
* (google),cros_ec
  - Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
  - Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
  - Drop a pointless semicolon
* invensense,icm426xx
  - Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
  - Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
  - Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
  - Stop relying on users counter form input device in ISR.
* st,lsm6dsx
  - add vdd and vddio regulator control (including binding update)
* st,stm32-adc
  - Tidy up code for dma transfers.
  - Adapt clock duty cycle for proper functioning. Note no known problems
    with existing boards.
* st,vl53l0x-i2c
  - Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
  - Put back i2c_device_id table as needed for greybus probing.

* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
  dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
  dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
  dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
  dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
  dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
  dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
  dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
  dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
  dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
  dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
  dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
  dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
  dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
  dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
  ...
 2020-11-24 08:30:08 +01:00
Cristian Pop
7d4156ddf1 dt-bindings:iio:adc:adi,ad7768-1: Add documentation for channel label 
Optional attribute for better identification of the channels.

Signed-off-by: Cristian Pop <cristian.pop@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200928090959.88842-4-cristian.pop@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2020-11-08 16:07:39 +00:00
Rob Herring
6ad8838de4 dt-bindings: More whitespace clean-ups in schema files 
Clean-up incorrect indentation, extra spaces, and missing EOF newline in
schema files. Most of the clean-ups are for list indentation which
should always be 2 spaces more than the preceding keyword.

Found with yamllint (now integrated into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for display
Acked-by:  Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Signed-off-by: Rob Herring <robh@kernel.org>
 2020-10-26 16:13:56 -05:00
Jonathan Cameron
dd29b12973 dt-bindings:iio:adc:adi,ad7768-1 yaml conversion 
Fairly straight conversion.  The one oddity in the original binding
is that spi-cpha and spi-cpol were not marked as required, but were
in the example.  Looking at the datasheet, there isn't any documented
flexibility in the possible SPI modes, so I have moved these to requires.
For spi-max-frequency I have gone the other way.  I absolutely agree
that it is good to specify this in the dt-binding, but it's not
strictly required.

As Stefan's email is bouncing I have gone with Michael as maintainer
of this one as it falls under the ADI catch all entry in MAINTAINERS.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Link: https://lore.kernel.org/r/20200909175946.395313-16-jic23@kernel.org
 2020-09-21 20:01:49 +01:00