mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 15:14:52 +00:00
loongarch-next
193 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
260f6f4fda |
drm for 6.17-rc1
non-drm: rust: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings mtd: - driver for Intel GPU non-volatile storage i2c - designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmiJM/0ACgkQDHTzWXnE hr6MpA/+JJKGdSdrE95QkaMcOZh/3e3areGXZ0V/RrrJXdB4/DoAfQSHhF0H7m7y MhBGVLGNMXq7KHrz28p1MjLHrE1mwmvJ6hZ4J076ed4u9naoCD0m6k5w5wiue+KL HyPR54ADxN0BYmgV0l/B0wj42KsHyTO4x4hdqPJu02V9Dtmx6FCh2ujkOF3p9nbK GMwWDttl4KEKljD0IvQ9YIYJ66crYGx/XmZi7JoWRrS104K/h1u8qZuXBp5jVKTy OZRAVyLdmJqdTOLH7l599MBBcEd/bNV37/LVwF4T5iFunEKOAiyN0QY0OR+IeRVh ZfOv2/gp4UNyIfyahQ7LKLgEilNPGHoPitvDJPvBZxW2UjwXVNvA1QfdK5DAlVRS D5NoFRjlFFCz8/c2hQwlKJ9o7eVgH3/pK0mwR7SPGQTuqzLFCrAfCuzUvg/gV++6 JFqmGKMHeCoxO2o4GMrwjFttStP41usxtV/D+grcbPteNO9UyKJS4C38n4eamJXM a9Sy9APuAb6F0w5+yMItEF7TQifgmhIbm5AZHlxE1KoDQV6TdiIf1Gou5LeDGoL6 OACbXHJPL52tUnfCRpbfI4tE/IVyYsfL01JnvZ5cZZWItXfcIz76ykJri+E0G60g yRl/zkimHKO4B0l/HSzal5xROXr+3VzeWehEiz/ot1VriP5OesA= =n9MO -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ... |
||
|
Linus Torvalds
|
115e74a29b |
soc: dt changes for 6.17
There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now.
- exynos2200 is a recent high-end mobile phone chip used in a
few Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it.
There are five more chips in a separate branch, as those are new
chip families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly
added machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and
Sophgo sg2042.
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95.
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm.
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmiEp54ACgkQmmx57+YA
GNmE+BAAvGeMkjz05rl3kSeNWCxm3WlQtrVAS3CGxXlmuB3GH4svAYO7ZFqnA1Lq
oLKfvH9TXQgNTRlRV2bKSVCcgsvMdRukqvaNIp+9jOHKkdapgGUHr7XALZCITODp
Ey2YPOKVi3aY2tEqUiuV09oLBFYBB5ldSuPG7SnFHNS0+IWlqqFDdQhrFXfBNf02
Upzca6J96A6TRG7Rq+VD4127QLapNDLm1S2R+3PbEapz/v/XNxQEtigWl+E88N5L
ju1pXu9f93w1EeQla6rN6S8RKI6Ed0kVt0I7mtwJ5KrPs9jzQwZZc5t7z+0HVyaK
o5ldagj7nEVlth2Fc2+E67DnxB6Xe8BkTcNspnS6oWscqvyYo2WCjYOBQcTocU5m
ej4urbS80z2bGbew9zp/ZCBJjmqOdXW/B8z9mokg1u/aktHmAiOWXnFZtws5+rBM
It/GjP4b8MzS3JYq1oNSCUV2KpYF9hzfSg1Td7DEvyhhvSgeJyXNsc4OozZzTCv6
bO3h1PBW6JBWVupRIAz7IrqseAsCabCMfIHduvtYWJieRzv24z1Dfv8p73v3iknN
qpOOyGOvWdPH0u04LAbovYdJfGrR/IN04wOYGcH0uB/bufW5qCKBb9AEAvxvTaJR
Jg1Q7ac/+TVJSFwBQJresw4WdFPHVKVwd2s382Q5hKtx3B5Cn4Y=
=0VBL
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
||
|
Sasha Finkelstein
|
f8c667edaf |
dt-bindings: gpu: Add Apple SoC GPU
Add bindings for the GPU present in Apple SoCs Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Sven Peter <sven@kernel.org> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Link: https://lore.kernel.org/r/20250710-sgx-dt-v3-1-299bb3a65109@gmail.com Signed-off-by: Sven Peter <sven@kernel.org> |
||
|
Mikhail Kalashnikov
|
7bce7ae1a1 |
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
Add a compatible for the Allwinner A523 SoC, with an integrated ARM Mali G57 MC1 (Valhall-JM) GPU. Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com> Link: https://lore.kernel.org/r/20250711035730.17507-2-iuncuim@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Louis-Alexis Eyraud
|
ea024e6e7a |
dt-bindings: gpu: mali-bifrost: Add compatible for MT8370 SoC
Add a compatible for the MediaTek MT8370 SoC, with an integrated ARM Mali G57 MC2 GPU (Valhall-JM, dual core). None of the already existing SoC specific compatibles is usable as fallback, as those either do not match the number of cores (and number of power domains), or are for a different GPU architecture. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-1-2833888cb1d3@collabora.com |
||
|
Thomas Zimmermann
|
c598d5eb9f |
Merge drm/drm-next into drm-misc-next
Backmerging to forward to v6.16-rc1 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Linus Torvalds
|
bf373e4c78 |
Devicetree updates for v6.16:
DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()
-----BEGIN PGP SIGNATURE-----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=gMwN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
||
|
Tommaso Merciai
|
b945781301 |
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
Add a compatible string for the Renesas RZ/G3E SoC variants that include a Mali-G52 GPU. These variants share the same restrictions on interrupts, clocks, and power domains as the RZ/G2L SoC, so extend the existing schema validation accordingly. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Link: https://lore.kernel.org/r/20250528073040.904033-1-tommaso.merciai.xr@bp.renesas.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Jonas Karlman
|
6f446bbe41 |
dt-bindings: gpu: mali-utgard: Add Rockchip RK3528 compatible
Rockchip RK3528 SoC has a Mali-450 MP2. Add a compatible for it. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518225418.682182-2-jonas@kwiboo.se |
||
|
Lad Prabhakar
|
a92b9efaf2 |
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/V2N SoC
Add a compatible string for the Renesas RZ/V2N SoC variants that include a Mali-G31 GPU. These variants share the same restrictions on interrupts, clocks, and power domains as the RZ/G2L SoC, so extend the existing schema validation accordingly. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250502162540.165962-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Michal Wilczynski
|
1300a7f8a7
|
dt-bindings: gpu: Add 'resets' property for GPU initialization
All IMG Rogue GPUs include a reset line that participates in the power-up sequence. On some SoCs (e.g., T-Head TH1520 and Banana Pi BPI-F3), this reset line is exposed and must be driven explicitly to ensure proper initialization. To support this, add a 'resets' property to the GPU device tree bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://lore.kernel.org/r/20250418-apr_18_reset_img-v6-1-85a06757b698@samsung.com Signed-off-by: Matt Coster <matt.coster@imgtec.com> |
||
|
Matt Coster
|
86e3f3a694
|
dt-bindings: gpu: img: Add BXS-4-64 devicetree bindings
Unlike AXE-1-16M, BXS-4-64 uses two power domains. Like the existing AXE-1-16M integration, BXS-4-64 uses the single clock integration in the TI k3-j721s2. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-2-eda620c5865f@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com> |
||
|
Matt Coster
|
2c01d90998
|
dt-bindings: gpu: img: Future-proofing enhancements
The first compatible strings added for the AXE-1-16M are not sufficient to accurately describe all the IMG Rogue GPUs. The current "img,img-axe" string refers to the entire family of Series AXE GPUs, but this is primarily a marketing term and does not denote a level of hardware similarity any greater than just "Rogue". The more specific "img,img-axe-1-16m" string refers to individual AXE-1-16M GPU. For example, unlike the rest of the Series AXE GPUs, the AXE-1-16M only uses a single power domain. The situation is actually slightly worse than described in the first paragraph, since many "series" (such as Series BXS found in the TI AM68 among others and added later in this series) contain cores with both Rogue and Volcanic architectures. Besides attempting to move away from vague groupings defined only by marketing terms, we want to draw a line between properties inherent to the IP core and choices made by the silicon vendor at integration time. For instance, the number of power domains is a property of the IP core, whereas the decision to use one or multiple clocks is a vendor one. In the original compatible strings, we must use "ti,am62-gpu" to constrain both of these properties since the number of power domains cannot be fixed for "img,img-axe". Work is currently underway to add support for volcanic-based Imagination GPUs, for which bindings will be added in "img,powervr-volcanic.yaml". As alluded to previously, the split between rogue and volcanic cores is non-obvious at times, so add a generic top-level "img,img-rogue" compatible string here to allow for simpler differentiation in devicetrees without referring back to the bindings. The currently supported GPU (AXE-1-16M) only requires a single power domain. Subsequent patches will add support for BXS-4-64 MC1, which has two power domains. Add infrastructure now to allow for this. Also allow the dma-coherent property to be added to IMG Rogue GPUs, which are DMA devices. The decision for coherency is made at integration time and this property should be applied wherever it accurately describes the vendor integration. Note that the new required properties for power domains are conditional on the new base compatible string to avoid an ABI break. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250410-sets-bxs-4-64-patch-v1-v6-1-eda620c5865f@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com> |
||
|
Thomas Zimmermann
|
1afba39f93 |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Linus Torvalds
|
3b9ea5b5ed |
Devicetree for v6.15:
DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and NR_FWNODE_REFERENCE_ARGS
and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref count
error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups (i.e.
common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali Bifrost
GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation warnings
- Drop some obsolete parts of Xilinx bindings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmflobEACgkQ+vtdtY28
YcNmuw//V4f4rusnegzm0yYy00KsagWDeynxZRchpX0Pqd+kHqsjaOKXiRQLyZll
DHzngYjkPwOzTwnhxGPjAxJf1kWwh3b2vDPC8WsFrgqiKM57aq8uUPFexTwNAIg8
aG+F9nugIu5Afam3AvjuMQUa/6msDrI/FHU6jy434h/A452ufjc1kNYXlfVUOAcA
Gc5L52FAte5A+6/sfM4CAwAM0xGIuI24ynlun5JHwdmAi+eBO6MmnHjjw+AyTXk7
ewT/99uDYNrQQn6xe1y1ButSuXnnXkuAvRERegkGsc4oF+WewAxlSBCjTGT5omRC
38aYnKSknYgKBp3htW5kYYUv89h1K25C/0Xt+cTr8ipYnGMg0vrJX6URtaozKTre
BpoFetzHgkvwvHEaKuYn7O+9w+n9Ne4Ya++7uiVrXN+sbTpBZRD41wqr5UyP/CZu
1jAv2n7z52T2F3mqyy46Rrtg+DSLZiPUCidmH8f/hGhyGdfp859KkkB1q8Bd3aMY
S38ksT/2eySYouXVzRjTKvoIGdt6qR8yRcIF0ccdJWMI6Rhq/qTI9xVJ3lrwiI/A
R5DlprYEXXyM0US1u0CCljhXR1AIFwQoE18SrHb02AkAeZpDL7tkCdyqa3D9vhFd
adzaUS+CqsBbipTlkg6C62VPUeLf5MbqVXfRoUUhwzZzji94nxk=
=DTXf
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and
NR_FWNODE_REFERENCE_ARGS and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref
count error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups
(i.e. common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation
warnings
- Drop some obsolete parts of Xilinx bindings"
* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
scripts/make_fit: Print DT name before libfdt errors
dt-bindings: edac: altera: socfpga: Convert to YAML
dt-bindings: pps: gpio: Correct indentation and style in DTS example
media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
of: address: Allow to specify nonposted-mmio per-device
of: address: Expand nonposted-mmio to non-Apple Silicon platforms
docs: dt-bindings: Specify ordering for properties within groups
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
of: Move of_prop_val_eq() next to the single user
of/platform: Use typed accessors rather than of_get_property()
dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
docs: process: maintainer-soc-clean-dts: linux-next is decisive
docs: dt: submitting-patches: Document sending DTS patches
of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
...
|
||
|
Maíra Canal
|
b1cd1d738e
|
dt-bindings: gpu: v3d: Add V3D driver maintainer as DT maintainer
As established in commit
|
||
|
Maíra Canal
|
e29671ae97
|
dt-bindings: gpu: v3d: Add SMS register to BCM2712 compatible
V3D 7.1 exposes a new register block, called V3D_SMS. As BCM2712 has a V3D 7.1 core, add a new register item to its compatible. Similar to the GCA, which is specific for V3D 3.3, SMS should only be added for V3D 7.1 variants (such as brcm,2712-v3d). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-3-f3ee7717ed17@igalia.com |
||
|
Maíra Canal
|
38712c5281
|
dt-bindings: gpu: v3d: Add per-compatible register restrictions
In order to enforce per-SoC register rules, add per-compatible restrictions. For example, V3D 3.3 (used in brcm,7268-v3d) has a cache controller (GCA), which is not present in other V3D generations. Declaring these differences helps ensure the DTB accurately reflect the hardware design. The example was using an incorrect order for the register names. This commit corrects that by enforcing the order established in the register items description. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-2-f3ee7717ed17@igalia.com |
||
|
Kaustabh Chakraborty
|
d47bdcbc55 |
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
Exynos7870 SoC uses the ARM Mali T830 GPU, document its compatible string with the appropriate fallback. The T830 compatible is already defined in the panfrost driver, but was commented out as it was unused. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Link: https://lore.kernel.org/r/20250318-exynos7870-gpu-v2-1-58dc2094dc7f@disroot.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Kever Yang
|
049e7ac203 |
dt-bindings: gpu: Add rockchip,rk3562-mali compatible
The Rockchip RK3562 GPU is ARM Mali-G52, use the same driver with "arm,mali-bifrost". Extend the binding accordingly to allow compatible = "rockchip,rk3562-mali", "arm,mali-bifrost"; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250227111913.2344207-6-kever.yang@rock-chips.com |
||
|
Andre Przywara
|
6c10926fce |
dt-bindings: gpu: mali-bifrost: Add Allwinner H616 compatible
The Allwinner H616 SoC has a Mali-G31 MP2 GPU, which is of the Mali Bifrost family. Add the SoC specific compatible string and pair it with the bifrost fallback compatible. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20250221005802.11001-4-andre.przywara@arm.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Lad Prabhakar
|
c29ebef507 |
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/V2H(P) SoC
Add a compatible string for the Renesas RZ/V2H(P) SoC variants that include a Mali-G31 GPU. These variants share the same restrictions on interrupts, clocks, and power domains as the RZ/G2L SoC, so extend the existing schema validation accordingly. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20250218115922.407816-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Alain Volmat
|
0deaca4cad |
dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible
ST STiH410 SoC has a Mali400. Add a compatible for it. Signed-off-by: Alain Volmat <avolmat@me.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> |
||
|
Detlev Casanova
|
053d157840 |
dt-bindings: gpu: Add rockchip,rk3576-mali compatible
The rk3576 SoC has an ARM Mali G52 MC3 GPU, that is compatible with arm,mali-bifrost. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240903152308.13565-6-detlev.casanova@collabora.com |
||
|
AngeloGioacchino Del Regno
|
b3abace4cb |
dt-bindings: gpu: mali-bifrost: Add compatible for MT8188 SoC
Add a compatible for the MediaTek MT8188 SoC, with an integrated ARM Mali G57 MC3 (Valhall-JM) GPU. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611085602.491324-2-angelogioacchino.delregno@collabora.com |
||
|
Thomas Zimmermann
|
0d21364c6e |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.9-rc2 changes into drm-misc-next. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Liviu Dudau
|
64bc5bd055 |
dt-bindings: gpu: mali-valhall-csf: Add support for Arm Mali CSF GPUs
Arm has introduced a new v10 GPU architecture that replaces the Job Manager interface with a new Command Stream Frontend. It adds firmware driven command stream queues that can be used by kernel and user space to submit jobs to the GPU. Add the initial schema for the device tree that is based on support for RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip platforms they will tend to expose the semi-independent clocks for better power management. v6: - Add Maxime's and Heiko's acks v5: - Move the opp-table node under the gpu node v4: - Fix formatting issue v3: - Cleanup commit message to remove redundant text - Added opp-table property and re-ordered entries - Clarified power-domains and power-domain-names requirements for RK3588. - Cleaned up example Note: power-domains and power-domain-names requirements for other platforms are still work in progress, hence the bindings are left incomplete here. v2: - New commit Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-14-boris.brezillon@collabora.com |
||
|
Andrew Davis
|
796da8ca7e |
dt-bindings: gpu: Add PowerVR Series5 SGX GPUs
The Imagination PowerVR Series5 "SGX" GPU is part of several SoCs from multiple vendors. Describe how the SGX GPU is integrated in these SoC, including register space and interrupts. Clocks, reset, and power domain information is SoC specific. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20240109171950.31010-3-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Andrew Davis
|
35df039b26 |
dt-bindings: gpu: Rename img,powervr to img,powervr-rogue
This binding will be used for GPUs starting from Series6 (Rogue) and later. A different binding document will describe Series5. With that the name "img,powervr" is too generic, rename to "img,powervr-rogue" to avoid confusion. Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20240109171950.31010-2-afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Linus Torvalds
|
38814330fe |
Devicetree for v6.8:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings to schemas - Improvements in Samsung GPU schemas - A few more cases of dropping unneeded quotes in schemas - Merge QCom idle-states txt binding into common idle-states schema - Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain Controller - Add NXP i.mx8dl to SCU PD - Add synaptics r63353 panel controller - Clarify the wording around the use of 'wakeup-source' property - Add a DTS coding style doc - Add smi vendor prefix - Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel tree - Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present - Fix double free in of_parse_phandle_with_args_map() - A couple of kerneldoc fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmWhWgYACgkQ+vtdtY28 YcPHeA//f6xoTczQDavkfVcl+9vfR6uLXAq/sDj0t3qiEbRuBG15dAzGZJGI8Pro 7T9+6wFRS89lwS8qd1wJvoDTlIxcZebvBapzNp3e0XSis98f89qqqDnfxilKgPau QF+mAlQ2tEZoHYUQIGXbjyq9X8GqQ3KGibkfowmdh5NFw5ORWaz9d0Fmiank620a gpH/jCZFBmboWlnKbJKUV8yjna/T8XCPqWUGcPst3ByTNEWToAMInpL4SOaw80dn WdAyZGS8K9GDwrvwdjIFUipcLGXk2kQLQhlOIm9wP/qdpoLfzdLuK96njiqv8PP/ /pDJrtDcGNkFi5327OQXoYB+UhDiouQJWSVKphZiwPuW/xpbpEkC00bZztZ6tMOl qilXuAbDwb+1cjI9HO95w/SDbCppISvXDslJuLFhyLA/FBmMewe8ypuh6vm7JMoe MKSfkjDEyBdKEp1iySyVKxVfIa4Ph7jR9B8bDGOaF0/bpzsB5e51pPH0oc9lLv8L No+AKQnyijruj6F+LVhIimgKLN6zuFqfgOgVshGYbEhAVbbT4cBx4NHGFXqL+6DP FedBjqi0mdIECF+F8FcfKpO80Pi+1bxjgLPYt5d67y+nZUIEe2xJUOdp07f80cHQ Qo0L0h9UVI8pKrWBbtQXeeAMG9l4SMwriazoAzudvUk9Hlh3LWk= =5zC/ -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings to schemas - Improvements in Samsung GPU schemas - A few more cases of dropping unneeded quotes in schemas - Merge QCom idle-states txt binding into common idle-states schema - Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain Controller - Add NXP i.mx8dl to SCU PD - Add synaptics r63353 panel controller - Clarify the wording around the use of 'wakeup-source' property - Add a DTS coding style doc - Add smi vendor prefix - Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel tree - Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present - Fix double free in of_parse_phandle_with_args_map() - A couple of kerneldoc fixes * tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits) of: unittest: Fix of_count_phandle_with_args() expected value message dt-bindings: fpga: altera: Convert bridge bindings to yaml dt-bindings: fpga: Convert bridge binding to yaml dt-bindings: vendor-prefixes: Add smi dt-bindings: power: Clarify wording for wakeup-source property of: Fix double free in of_parse_phandle_with_args_map dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES drivers: of: Fixed kernel doc warning dt-bindings: tpm: Document Microsoft fTPM bindings dt-bindings: tpm: Convert IBM vTPM bindings to DT schema dt-bindings: tpm: Convert Google Cr50 bindings to DT schema dt-bindings: tpm: Consolidate TCG TIS bindings dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible dt-bindings: arm: Add remote etm dt-binding dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas dt-bindings: display: panel: Add synaptics r63353 panel controller dt-bindings: arm: merge qcom,idle-state with idle-state dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries ... |
||
|
Linus Torvalds
|
cf65598d59 |
drm-next for 6.8:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name
-----BEGIN PGP SIGNATURE-----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=nuw0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
||
|
Krzysztof Kozlowski
|
6a4ff5eab8 |
dt-bindings: gpu: samsung-scaler: constrain iommus and power-domains
Provide specific constraints for iommus and power-domains, based on current DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231112184403.3449-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Krzysztof Kozlowski
|
6ff067f3d5 |
dt-bindings: gpu: samsung-g2d: constrain iommus and power-domains
Provide specific constraints for iommus and power-domains, based on current DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231112184403.3449-4-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Krzysztof Kozlowski
|
f1d797b6da |
dt-bindings: gpu: samsung: constrain clocks in top-level properties
When number of clock varies between variants, the Devicetree bindings coding convention expects to have widest constraints in top-level definition of the properties and narrow them in allOf:if:then block. This is more readable and sometimes allows to spot some errors in the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231112184403.3449-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Krzysztof Kozlowski
|
6b91e0ee7f |
dt-bindings: gpu: samsung: re-order entries to match coding convention
The Devicetree bindings coding convention, as used in most of the files and expressed in Documentation/devicetree/bindings/example-schema.yaml, expects "allOf:" block with if-statements after "required:" block. Re-order few schemas to match the convention to avoid repeating review comments for new patches using existing code as template. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231112184403.3449-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Krzysztof Kozlowski
|
644977738c |
dt-bindings: gpu: samsung-rotator: drop redundant quotes
Compatibles should not use quotes in the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231112184403.3449-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Alex Bee
|
5d86c15c31 |
dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible
Rockchip RK312x SoC family has a Mali400 MP2. Add a compatible for it. Signed-off-by: Alex Bee <knaerzche@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231202125144.66052-4-knaerzche@gmail.com |
||
|
Sarah Walker
|
6a85c3b147
|
dt-bindings: gpu: Add Imagination Technologies PowerVR/IMG GPU
Add the device tree binding documentation for the IMG AXE GPU used in TI AM62 SoCs. Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/deb0a4659423a3b8a74addee7178b6df7679575d.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Krzysztof Kozlowski
|
416231a9e3 |
dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
Samsung Exynos SoC reuses several devices from older designs, thus historically we kept the old (block's) compatible only. This works fine and there is no bug here, however guidelines expressed in Documentation/devicetree/bindings/writing-bindings.rst state that: 1. Compatibles should be specific. 2. We should add new compatibles in case of bugs or features. Add compatibles specific to each SoC in front of all old-SoC-like compatibles. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231108104343.24192-10-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
Iago Toral Quiroga
|
ebb2f6eea6
|
dt-bindings: gpu: v3d: Add BCM2712's compatible
BCM2712, Raspberry Pi 5's SoC, contains a V3D core. So add its specific compatible to the bindings. Signed-off-by: Iago Toral Quiroga <itoral@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031073859.25298-4-itoral@igalia.com |
||
|
Linus Torvalds
|
6c1561fb90 |
ARM: SoC devicetree updates for 6.5
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmeUACgkQYKtH/8kJ
UieI5A//bxZXA54htEPXN5V1oIgC4JB4UYkf8fAvtyK4tdaImMn4OTwLD8/sw18X
LQHf1VOLGsGJyNCQ+cUoaBnysr2CXqL/9dA/ARTalqnrKMN/OQjt2wg62n1Ss9Pv
XRlxJABGxAokTO/SuPtOIakSkzwDkuAkIFKfmrNQGcT95XkJXJk3FlMRr84310UG
sl6jP2XFSiLSYm958MMNt+DMhxRmKuyT9gos24KGsb83lZSm9DC2hYimkjd1KF5P
CKeShWeoGoJe+YhnJx6dsDSqVgp1DFLZF1G0auSwjs9rCAKnCDMlz+T2bEzviVDh
XONBNmnOGwPRiBI+1WdzX+pZqMMWINmhIObuODV4ANCSlX3KlSaC2rropEimlW9S
CefvYJ+i7v/BQgMLhKlft0RHhsPU7Pfhfq4PWxaIMAOWA6ZaVczMCpgeUupHIwIQ
lWXZZDlqmTL6SCgkOhEtdP2GGec7YSroq7sscinBaQs1f5pfoW83CNn46gZ9Jh8S
RnXp/+vZ7+RFc15Y0VM82F6a7WN/n0BAqKmqwceDrCpf6ILrBc1lA7NhEvd80wbB
IMg8QNqIzZ9aTOoZmB/1wAXaLClKCE3poTF+Wkd5szN7qe+hKAe1M4w5XvNUO/i/
d0/X5KNA2ykuUxRMdd4lG54VsTJdDCVNaNeaEqasv9JCBBfvuwI=
=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
|
||
|
Krzysztof Kozlowski
|
a835321b3c |
dt-bindings: gpu: drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230609140738.64958-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Parth Gajjar
|
80550562f6 |
dt-bindings: gpu: mali-utgard: Add xlnx,zynqmp-mali compatible
Xilinx zynqmp SoC contains Mali400, so add its specific compatible to bindings. Signed-off-by: Parth Gajjar <parth.gajjar@amd.com> Signed-off-by: Vishal Sagar <vishal.sagar@amd.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230321070619.29440-2-parth.gajjar@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com> |
||
|
Linus Torvalds
|
c8cc58e289 |
drm next for 6.4-rc1
New drivers: - add QAIC acceleration driver dma-buf: - constify kobj_type structs - Reject prime DMA-Buf attachment if get_sg_table is missing. fbdev: - cmdline parser fixes - implement fbdev emulation for GEM DMA drivers - always use shadow buffer in fbdev emulation helpers dma-fence: - add deadline hint to fences - signal private stub fence core: - improve DisplayID 2.0 and EDID parsing - add gem eviction function + callback - prep to convert shmem helper to GEM resv lock - move suballocator from radeon/amdgpu to core for Xe - HPD polling fixes - Documentation improvements - Add atomic enable_plane callback - use tgid instead of pid for client tracking - DP: Add SDP Error Detection Configuration Register - Add prime import/export to vram-helper - use pci aperture helpers in more drivers panel: - Radxa 8/10HD support - Samsung AMD495QA01 support - Elida KD50T048A - Sony TD4353 - Novatek NT36523 - STARRY 2081101QFH032011-53G - B133UAN01.0 - AUO NE135FBM-N41 i915: - More MTL enabling - fix s/r problems with MEI/PXP - Implement fb_dirty for PSR,FBC,DRRS fixes - Fix eDP+DSI dual panel systems - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring - Don't use stolen memory or BAR for ring buffers on LLC platforms - Make sure DSM size has correct 1MiB granularity on Gen12+ - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ - Add engine TLB invalidation for Meteorlake - Fix GSC races on driver load/unload on Meteorlake+ - Make kobj_type structures constant - Move fd_install after last use of fence - wm/vblank refactoring - display code refactoring - Create GSC submission targeting HDCP and PXP usages on MTL+ - Enable HDCP2.x via GSC CS - Fix context runtime accounting on sysfs fdinfo for heavy workloads - Use i915 instead of dev_priv insied the file_priv structure - Replace fake flex-array with flexible-array member amdgpu: - Make kobj structures const - Generalize dmabuf import to work with KFD - Add capped/uncapped workload handling for supported APUs - Expose additional memory stats via fdinfo - Register vga_switcheroo for apple-gmux - Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support - Initial DC FAM infrastructure - Link DC backlight to connector device rather than PCI device - Add sysfs nodes for secondary VCN clocks amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - initial GC 9.4.3 support radeon: - iMac fix - convert to client based fbdev emulation habanalabs: - Add opcodes to the CS ioctl to allow user to stall/resume specific engines inside Gaudi2. - INFO ioctl the amount of device memory that the driver and f/w reserve for themselves. - INFO ioctl a bit-mask of the available rotator engines - INFO ioctl the register's address of the f/w that should be used to trigger interrupts - INFO ioctl two new opcodes to fetch information on h/w and f/w events - Enable graceful reset mechanism for compute-reset. - Align to the latest firmware specs. - Enforce the release order of the compute device and dma-buf. msm: - UBWC decoder programming rework - SM8550, SM8450 bindings update - uapi C++ fix - a3xx and a4xx devfreq support - GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path - dma-fence deadline hint support and wait-boost - a640/650 speed bin support cirrus: - convert to regular atomic helpers - add damage clipping mediatek: - 10-bit overlay support - mt8195 support - Only trigger DRM HPD events if bridge is attached - Change the aux retries times when receiving AUX_DEFER rockchip: - add 4K support vc4: - use drm_gem_objects virtio: - allow KMS support to be disabled - add damage clipping vmwgfx: - buffer object lifetime fixes exynos: - move MIPI DSI driver to drm bridge for iMX sharing - use kernel fbdev emulation panfrost: - add support for mali MT81xx devices - add speed binning support lima: - add usage stats tegra: - fbdev client conversion vkms: - Add primary plane positioning support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmRGFU4ACgkQDHTzWXnE hr5m4w/9GzutylTH5aY+otFRNR6uKWGJZ9d90RLyLOE3vjE+7/Q/36EXPOjZctVt VgfQD1giKIGD9ENcCfwbw6iwyVAjLvinBr3Hz4NleEu1TjdXPJvgo9OW/+FQKVi6 1vWH/mcnN6o89m3Mme7T2drFtwy3Y6/l5EY18yNyI7XeQVUMaDTr9Lvcriq0Sigc CInYxilIxViKioYZQmHihXPnZ89nNQZweN2GtDu8O9Bw1Z1eEyn0kRzb3px2Zl6T MpQEQasrPDdF3LFlVWs0AlKmLFbhqV9Pq/OPfowfAWT5RSXpeDvO95NaL3EPzFXy AO6jWHR7/VpvWvj4iJ6R35TLgi/CyASxjJ8Cr9k61Sb1U2WthMEmtd1BKBtI5mTq Us7yP2WJle3LXEqXyvDKDGsZf8kOQ4nyJx+3CJof5Tbnzy3hn+JUkTiUweSDQ14x CHEz7TI8WY5G96+zcyBcee0MWa3V6IXH0cjuMMUiSHw1uir34LuyP+plaELp3eqv MFf5WUJEuU9DmDlxRd2W+g6fmKWaEkY2ksWcbD7H3BZrBmnxkS4LIyfC9HJirGCC 4JF4+4k55F/UAzQOi/4hQxulPtQmHug2/9c29IqZerwxekYdMRkb75rIoVf0IfF4 uLexY0u3aO+IKZ7ygSL9MAwAyiJU6ulYigMLxWMjT7vU36CF5Z8= =NUEy -----END PGP SIGNATURE----- Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "There is a new Qualcomm accel driver for their QAIC, dma-fence got a deadline feature added, lots of refactoring around fbdev emulation, and the usual pre-release hw enablements from AMD and Intel and fixes everywhere. New drivers: - add QAIC acceleration driver dma-buf: - constify kobj_type structs - Reject prime DMA-Buf attachment if get_sg_table is missing. fbdev: - cmdline parser fixes - implement fbdev emulation for GEM DMA drivers - always use shadow buffer in fbdev emulation helpers dma-fence: - add deadline hint to fences - signal private stub fence core: - improve DisplayID 2.0 and EDID parsing - add gem eviction function + callback - prep to convert shmem helper to GEM resv lock - move suballocator from radeon/amdgpu to core for Xe - HPD polling fixes - Documentation improvements - Add atomic enable_plane callback - use tgid instead of pid for client tracking - DP: Add SDP Error Detection Configuration Register - Add prime import/export to vram-helper - use pci aperture helpers in more drivers panel: - Radxa 8/10HD support - Samsung AMD495QA01 support - Elida KD50T048A - Sony TD4353 - Novatek NT36523 - STARRY 2081101QFH032011-53G - B133UAN01.0 - AUO NE135FBM-N41 i915: - More MTL enabling - fix s/r problems with MEI/PXP - Implement fb_dirty for PSR,FBC,DRRS fixes - Fix eDP+DSI dual panel systems - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring - Don't use stolen memory or BAR for ring buffers on LLC platforms - Make sure DSM size has correct 1MiB granularity on Gen12+ - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ - Add engine TLB invalidation for Meteorlake - Fix GSC races on driver load/unload on Meteorlake+ - Make kobj_type structures constant - Move fd_install after last use of fence - wm/vblank refactoring - display code refactoring - Create GSC submission targeting HDCP and PXP usages on MTL+ - Enable HDCP2.x via GSC CS - Fix context runtime accounting on sysfs fdinfo for heavy workloads - Use i915 instead of dev_priv insied the file_priv structure - Replace fake flex-array with flexible-array member amdgpu: - Make kobj structures const - Generalize dmabuf import to work with KFD - Add capped/uncapped workload handling for supported APUs - Expose additional memory stats via fdinfo - Register vga_switcheroo for apple-gmux - Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support - Initial DC FAM infrastructure - Link DC backlight to connector device rather than PCI device - Add sysfs nodes for secondary VCN clocks amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - initial GC 9.4.3 support radeon: - iMac fix - convert to client based fbdev emulation habanalabs: - Add opcodes to the CS ioctl to allow user to stall/resume specific engines inside Gaudi2. - INFO ioctl the amount of device memory that the driver and f/w reserve for themselves. - INFO ioctl a bit-mask of the available rotator engines - INFO ioctl the register's address of the f/w that should be used to trigger interrupts - INFO ioctl two new opcodes to fetch information on h/w and f/w events - Enable graceful reset mechanism for compute-reset. - Align to the latest firmware specs. - Enforce the release order of the compute device and dma-buf. msm: - UBWC decoder programming rework - SM8550, SM8450 bindings update - uapi C++ fix - a3xx and a4xx devfreq support - GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path - dma-fence deadline hint support and wait-boost - a640/650 speed bin support cirrus: - convert to regular atomic helpers - add damage clipping mediatek: - 10-bit overlay support - mt8195 support - Only trigger DRM HPD events if bridge is attached - Change the aux retries times when receiving AUX_DEFER rockchip: - add 4K support vc4: - use drm_gem_objects virtio: - allow KMS support to be disabled - add damage clipping vmwgfx: - buffer object lifetime fixes exynos: - move MIPI DSI driver to drm bridge for iMX sharing - use kernel fbdev emulation panfrost: - add support for mali MT81xx devices - add speed binning support lima: - add usage stats tegra: - fbdev client conversion vkms: - Add primary plane positioning support" * tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits) drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams drm/exynos: Implement fbdev emulation as in-kernel client drm/exynos: Initialize fbdev DRM client drm/exynos: Remove fb_helper from struct exynos_drm_private drm/exynos: Remove struct exynos_drm_fbdev drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev drm/i915: Fix memory leaks in i915 selftests drm/i915: Make intel_get_crtc_new_encoder() less oopsy drm/i915/gt: Avoid out-of-bounds access when loading HuC drm/amdgpu: add some basic elements for multiple XCD case drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4) Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV" drm/amdgpu: add common ip block for GC 9.4.3 drm/amd/display: Add logging when DP link training Clock recovery is Successful drm/amdgpu: add common early init support for GC 9.4.3 drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3 drm/amd/display: Add logging when setting DP sink power state fails drm/amdkfd: Add gfx_target_version for GC 9.4.3 drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3 drm/amdgpu: reserve the old gc_11_0_*_mes.bin ... |
||
|
Rob Herring
|
c94673e803 |
dt-bindings: arm: nvidia: Drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
AngeloGioacchino Del Regno
|
191308bae4 |
dt-bindings: gpu: mali-bifrost: Document nvmem for speedbin support
Some SoCs implementing ARM Mali GPUs may be subject to speed binning and the usable bin is read from nvmem: document the addition of nvmem and nvmem-cells for 'speed-bin'. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323090822.61766-2-angelogioacchino.delregno@collabora.com |
||
|
AngeloGioacchino Del Regno
|
2ade28304d |
dt-bindings: gpu: mali-bifrost: Add compatible for MT8195 SoC
The MediaTek MT8195 SoC has a Mali G57 MC5 (Valhall-JM) and has the same number of power domains and requirements as MT8192 in terms of bindings. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-8-angelogioacchino.delregno@collabora.com |
||
|
AngeloGioacchino Del Regno
|
0b2cf51402 |
dt-bindings: gpu: mali-bifrost: Add support for MediaTek MT8186
MT8186 has a Mali-G52 MC2 2EE GPU (two cores): add a binding with two power domains (one per core) for it. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-7-angelogioacchino.delregno@collabora.com |
||
|
AngeloGioacchino Del Regno
|
1f03cb1b0c |
dt-bindings: gpu: mali-bifrost: Add new MT8183 compatible
Since new platform data was required in Panfrost for getting GPU DVFS finally working on MediaTek SoCs, add a new "mediatek,mt8183b-mali" compatible. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-6-angelogioacchino.delregno@collabora.com |
||
|
AngeloGioacchino Del Regno
|
13a8fc8ae9 |
dt-bindings: gpu: mali-bifrost: Add sub-schema for MT8192's power domains
MediaTek MT8192 (and similar) needs five power domains for the
Mali GPU and no sram-supply: change the binding to allow so by
also introducing power-domain-names in the generic binding;
while at it, also disallow the newly introduced power-domain-names
for all non-MediaTek bindings.
Fixes:
|