A RISC-V platform can have both DMA coherent/noncoherent devices.
Since the RISC-V architecture is marked coherent, devices should
be marked as noncoherent when coherent devices exist.
Add dma-noncoherent property for snps,dw-axi-dmac device. It will
be used on SG2044, and it has other coherent devices.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250303065649.937233-1-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for StarFive JH8100 SoC in Sysnopsys Designware AXI DMA
controller.
Both JH8100 and JH7110 require reset operation in device probe.
However, JH8100 doesn't need to apply different configuration on
CH_CFG registers.
Signed-off-by: Tan Chun Hau <chunhau.tan@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240327025126.229475-2-chunhau.tan@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA controller needs two reset items to work properly on JH7110 SoC,
so there is need to constrain the items' value to 2, other platforms
have 1 reset item at most.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-2-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cleanup examples:
- use 4-space indentation (for cases when it is neither 4 not 2 space),
- use lowercase hex,
- drop unused node's label.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230124081117.31186-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Emails to Jee Heng Sia bounce ("550 #5.1.0 Address rejected."). Add
Keembay platform maintainers as Keembay I2S maintainers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221205164254.36418-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Canaan k210 apparently has a Sysnopsys Designware AXI DMA
controller, but according to the documentation & devicetree it has 6
interrupts rather than the standard one. Support the 6 interrupt
configuration by unconditionally extending the binding to a maximum of
8 per-channel interrupts thereby matching the number of possible
channels.
Link: https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf #Page 51
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220705215213.1802496-4-mail@conchuod.ie
Signed-off-by: Vinod Koul <vkoul@kernel.org>
"make dtbs_check":
Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
arch/riscv/boot/dts/canaan/sipeed_maix_bit.dt.yaml: dma-controller@50000000: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
The Synopsys DesignWare AXI DMA Controller on the Canaan K210 SoC
exposes its reset signal.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20211125152008.162571-1-geert@linux-m68k.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
YAML schemas Device Tree (DT) binding is the new format for DT to replace
the old format. Introduce YAML schemas DT binding for dw-axi-dmac and
remove the old version.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125013255.25799-2-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
