Commit Graph

5 Commits

Author SHA1 Message Date
Krzysztof Kozlowski
6b2358ff94 dt-bindings: display: panel: constrain 'reg' in SPI panels
SPI-attached devices could have more than one chip-select, thus their
bindings are supposed to constrain the 'reg' property to match hardware.
Add missing 'reg' constrain for SPI-attached display panels.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-2-8b2443705be0@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-05-13 09:57:34 -05:00
Krzysztof Kozlowski
41f53a6544
spi/panel: dt-bindings: drop 3-wire from common properties
The spi-3wire property is device specific and should be accepted only if
device really needs them.  Drop it from common spi-peripheral-props.yaml
schema, mention in few panel drivers which use it and include instead in
the SPI controller bindings.  The controller bindings will provide
spi-3wire type validation and one place for description.  Each device
schema must list the property if it is applicable.

The Samsung S6E63M0 panel uses also spi-cpha/cpol properties on at least
one board (ste-ux500-samsung-janice/dts), so add also these to the
panel's bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220810131311.428645-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-15 12:18:43 +01:00
Rob Herring
c476d430bf dt-bindings: display: Add SPI peripheral schema to SPI based displays
With 'unevaluatedProperties' support enabled, several SPI based display
binding examples have warnings:

Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected)
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected)
Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected)
Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)

Fix all of these by adding a reference to spi-peripheral-props.yaml.
With this, the description that the binding must follow
spi-controller.yaml is both a bit out of date and redundant, so remove
it.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org
2022-01-19 10:12:47 -06:00
Paul Cercueil
85a217750c dt-bindings: panel/kingdisplay,kd035g6-54nt: Remove spi-cs-high
The NT39016 panel is a fun beast, even though the documentation states
that the CS line is active-low, it will work just fine if the CS line is
configured as active-high, but it won't work if the CS line is forced
low or forced high.

Since it did actually work with the spi-cs-high property, this is not a
bugfix, but we should nonetheless remove that property from the example
to match the documentation.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12 15:57:18 +01:00
Sam Ravnborg
3b5d6c3c9c dt-bindings: display: convert kingdisplay,kd035g6-54nt to DT Schema
v2:
  - Drop use of spi-slave.yaml (Maxime)
  - Introduce unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-14-sam@ravnborg.org
2020-04-15 18:00:29 +02:00