The Mediatek CPUFreq binding document just describes properties from
the CPU node which the driver uses. This is redundant as all the
properties are described in the arm/cpus.yaml schema.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-17-63d7dc9ddd0a@kernel.org
Add SDX75 and SA8775p compatibles to respective if:then: blocks to
narrow their properties and add a new section for SM8650 with four 'reg'
and 'interrupts' (top-level already allows four).
SA8755p DTS comes without interrupts, but only because they might not
be available for OS under given firmware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
List cannot have 0 items, so 'minItems: 1' in each if:then: is
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When narrowing properties per variant, the 'interrupt-names' should have
the same constraints as 'interrupts'. Add missing upper bound on the
property.
Fixes: e690032024 ("dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290")
Fixes: 7ae24e054f ("dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add compatibles for Apple A7-A11, T2 SoCs.
Apple A7, A8, A8X gets the per-SoC compatible and the A7
"apple,s5l8960x-cluster-cpufreq" compatible.
Apple A9, A9X, A10, A10X, T2, A11 gets the per-SoC compatible, M1
"apple,t8103-cluster-cpufreq" compatible, then the
"apple,cluster-cpufreq" fallback compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
On newer Airoha SoC, CPU Frequency is scaled indirectly with SMC commands
to ATF.
A virtual clock is exposed. This virtual clock is a get-only clock and
is used to expose the current global CPU clock. The frequency info comes
by the output of the SMC command that reports the clock in MHz.
The SMC sets the CPU clock by providing an index, this is modelled as
performance states in a power domain.
CPUs can't be individually scaled as the CPU frequency is shared across
all CPUs and is global.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a SoC-specific compatible for SC8180X. It has 2 domains and uses
the older, non-EPSS hardware.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Adding bindings to represent a virtual cpufreq device.
Virtual machines may expose MMIO regions for a virtual cpufreq device
for guests to read performance information or to request performance
selection. The virtual cpufreq device has an individual controller for
each performance domain. Performance points for a given domain can be
normalized across all domains for ease of allowing for virtual machines
to migrate between hosts.
Co-developed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: David Dai <davidai@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add compatible for the cpufreq engine representing support on SA8255p.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document the CPUFREQ Hardware on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document newly introduced operating-points-v2-krait-cpu compatible to
the list of accepted compatible for opp-v2-kryo-cpu nodes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The bindings for Qualcomm CPU frequency have a compatible for each SoC.
Add the compatible for SDM670.
Fixes: 0c665213d1 ("arm64: dts: qcom: sdm670: add cpu frequency scaling")
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document that MSM8909 is used with qcom-cpufreq-nvmem for voltage
scaling and to restrict the maximum frequency based on the speedbin
encoded in the nvmem cells.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Minor core cleanup and addition of new frequency related APIs (Viresh
Kumar and Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon).
-----BEGIN PGP SIGNATURE-----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=b27+
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP updates for 6.6 from Viresh Kumar:
"- Minor core cleanup and addition of new frequency related APIs (Viresh
Kumar and Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)."
* tag 'opp-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
dt-bindings: opp: Increase maxItems for opp-hz property
OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd()
OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate()
OPP: Reuse dev_pm_opp_get_freq_indexed()
OPP: Update _read_freq() to return the correct frequency
OPP: Add dev_pm_opp_find_freq_exact_indexed()
OPP: Introduce dev_pm_opp_get_freq_indexed() API
OPP: Introduce dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs
OPP: Rearrange entries in pm_opp.h
On new platforms, a 4th frequency domain is used, document it.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Move the ti-cpufreq binding over to opp and convert the free text
binding to json-schema.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document the OSM CPUFREQ_HW present on QCM2290, featuring just one
lonely frequency domain.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Introduce per-SoC compatibles for OSM targets (read: pre-sm8250) and
sanitize the number of interrupt{s,-names} and reg/-names per-compatible.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Some SoCs implementing CPUFREQ-HW only have a single frequency domain.
Allow such case.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the compatible for the cpufreq engine present on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
-----BEGIN PGP SIGNATURE-----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=dCgg
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.3 from Viresh Kumar:
"- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi)."
* tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles
cpufreq: mediatek-hw: Register to module device table
cpufreq: tegra194: Enable CPUFREQ thermal cooling
The qcom-cpufreq-nvmem driver supports 2 kind of devices:
- pre-cpr that doesn't have power-domains and base everything on nvmem
cells and multiple named microvolt bindings.
Doesn't need required-opp binding in the opp nodes as they are only
used for genpd based devices.
- cpr-based that require power-domain in the cpu nodes and use various
source to decide the correct voltage and freq
Require required-opp binding since they need to be linked to the
related opp-level.
When the schema was introduced, it was wrongly set to always require these
binding but this is not the case for pre-cpr devices.
Make the power-domain and the required-opp optional and set them required
only for qcs404 based devices.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add additional info on what opp tables the defined devices in this schema
supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level)
and reference them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add compatible for EPSS CPUFREQ-HW on SM8550.
Also document the interrupts.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document the cpufreq-epss compatibles currently used in the tree, plus
the sc7280 which will be added in a separate commit.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm Soc cpufreq hardware engine has LMh/thermal throttling
interrupts (already present in SM8250 and SM8450 DTS) and Linux driver
uses them:
sm8250-hdk.dtb: cpufreq@18591000: 'interrupt-names', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
sm8450-qrd.dtb: cpufreq@17d91000: 'interrupt-names', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
DT Bindings:
- Various LED binding conversions and clean-ups. Convert the ir-spi-led,
pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently
reference LED common.yaml or multi-led schemas and disallow undefined
properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or were
missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61
-----BEGIN PGP SIGNATURE-----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=y/xu
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
- Fix nasty and hard to debug race condition introduced by mistake
in the runtime PM core code and clean up that code somewhat on
top of the fix (Rafael Wysocki).
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Update Qualcomm cpufreq driver, including:
* CPU clock provider support,
* Generic cleanups or reorganization.
* Potential memleak fix.
* Fix of the return value of cpufreq_driver->get().
(Manivannan Sadhasivam, Chen Hui).
- Update Qualcomm cpufreq driver's DT bindings, including:
* Support for CPU clock provider.
* Missing cache-related properties fixes.
* Support for QDU1000/QRU1000.
(Manivannan Sadhasivam, Rob Herring, Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET).
- Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich).
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
(Xiongfeng Wang).
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor).
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada).
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King).
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King).
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko).
- Drop a reference to CVS from cpufreq documentation (Conghui Wang).
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
- Fix compiler warnings with make W=1 in the idle_inject power capping
driver (Srinivas Pandruvada).
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET).
- Add SCMI Powercap based power capping driver (Cristian Marussi).
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy).
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn).
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns property in DT example (Serge Semin).
- Add a private governor_data for devfreq governors (Kant Fan).
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi).
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar).
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli).
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXWKsSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxzKsP/jEKIwMSG4KHyXjJSDopFvppA13468ma
ao2G5EnbtPgZOiN66BOcAfPB+pzBM8WBCnpy8sfNzcpQSaGaJr+flQDqQV/1QG/H
GNQ0MUYN6TF/zfz/hKawDtQJihw9OrJgqQfUJIyc7Djo8ntSBu299XAt3X8VB5D1
azU1WwfOnEhr8evkqd8DS81fwm6b5cWvLkfG3Qvk2VxlwC/BCFdygqNjwOXmMNMb
DPYWv1xoVhSKzJsPHbAtzFq6veLsw2Glf2xPDyjf9ZPB0ujrftFoRoeCrC/neBDb
5bB4P5Injg3IB7SAHf97XgGAH2biUKwVnQhVUOTWXdQ7u/xDbH5fOLFJkBOBP6n6
gZiEOqzg5wVXk+ZfKx4fjsf4LvB1r+nM2tmx/bzhxyt9UDLUfB9kY0PMXLRuYqyn
ITvk00CJ/hkwD98pql4pCnc1PYZLUv/CHiaqTjwwOKuue3Jb3OTSPrSWtYIyTyNx
s2eBz/CxGSg4Q25u3loIiNVAaCOul6SZq+Iz6BlVP8sy3q62LWi8mp5b+kb8HFWH
lk8GpavqOLF6brxpPL/n0vav2bCmdwblMjTcowtGbLgiGSZaD97AkPFTN2H7tGPv
iUZDTdK3H24aqY62yKzo2HK3PhwNCg06gF0VTsuvJ7iIQmfeUpLjB/3qGeJNjlEQ
20fQ6YU/NytB
=B9Uu
-----END PGP SIGNATURE-----
Merge tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include two new drivers (cpufreq driver for Apple SoC CPU
P-states and the SCMI Powercap based power capping driver), other new
hardware support and driver extensions (Qualcomm cpufreq driver and
its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq),
a bunch of fixes and cleanups all over and a cpupower utility update
including new features related to RAPL support.
Specifics:
- Fix nasty and hard to debug race condition introduced by mistake in
the runtime PM core code and clean up that code somewhat on top of
the fix (Rafael Wysocki)
- Generalize of_perf_domain_get_sharing_cpumask phandle format
(Hector Martin)
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin)
- Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui):
- CPU clock provider support
- Generic cleanups or reorganization
- Potential memleak fix
- Fix of the return value of cpufreq_driver->get()
- Update Qualcomm cpufreq driver's DT bindings (Manivannan
Sadhasivam, Rob Herring, Melody Olvera):
- Support for CPU clock provider
- Missing cache-related properties fixes
- Support for QDU1000/QRU1000
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan)
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET)
- Convert cpufreq statistics code to use sysfs_emit_at() (ye
xingchen)
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich)
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq
driver (Xiongfeng Wang)
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu)
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor)
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada)
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King)
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King)
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko)
- Drop a reference to CVS from cpufreq documentation (Conghui Wang)
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson)
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson)
- Modify the tasks freezing code to avoid using pr_cont() and refine
an error message printed by it (Rafael Wysocki)
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo)
- Fix mistake in a kerneldoc comment in the hibernation code
(xiongxin)
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa)
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in
the generic power domains code (Abel Vesa)
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo)
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo)
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo)
- Fix compiler warnings with make W=1 in the idle_inject power
capping driver (Srinivas Pandruvada)
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET)
- Add SCMI Powercap based power capping driver (Cristian Marussi)
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy)
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn)
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar)
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt
properties to be present without the others present (James
Calligeros)
- Fix clock-latency-ns property in DT example (Serge Semin)
- Add a private governor_data for devfreq governors (Kant Fan)
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi)
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar)
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli)
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger)"
* tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
PM: runtime: Adjust white space in the core code
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: runtime: Relocate rpm_callback() right after __rpm_callback()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
powercap: idle_inject: Fix warnings with make W=1
PM: hibernate: Complain about memory map mismatches during resume
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
...
json-schema patterns by default will match anywhere in a string, so
typically we want at least the start or end anchored. Fix the obvious
cases where the anchors were forgotten.
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221118223728.1721589-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This binding represents the cpufreq/DVFS hardware present in Apple SoCs.
The hardware has an independent controller per CPU cluster, and we
represent them as unique nodes in order to accurately describe the
hardware. The driver is responsible for binding them as a single cpufreq
device (in the Linux cpufreq model).
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. Document the same in the binding to reflect the actual
implementation.
CPUFreq HW will become the clock provider and CPU cores will become the
clock consumers.
The clock index for each CPU core is based on the frequency domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The examples' cache nodes are incomplete as 'cache-unified' and
'cache-level' are required cache properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra driver (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=fX64
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq/ARM updates for 5.20-rc1 from Viresh Kumar:
"- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra driver (Viresh Kumar)."
* tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
Add compatible for EPSS CPUFREQ-HW on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
msm8939 will uses this driver instead of the generic dt-cpufreq. Add to the
compatible list.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A number of devices listed in drivers/cpufreq/qcom-cpufreq-nvmem.c appear
to be missing from the compatible list.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
MediaTek Cache Coherent Interconnect (CCI) uses software devfreq module
for scaling clock frequency and adjust voltage.
The phandle could be linked between CPU and MediaTek CCI for some
MediaTek SoCs, like MT8183 and MT8186.
The reason we need the link status between cpufreq and MediaTek cci is
cpufreq and mediatek cci could share the same regulator in some MediaTek
SoCs. Therefore, to prevent the issue of high frequency and low voltage,
we need to use this to make sure mediatek cci is ready.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
