To make it easier for X1P4 and X1E to share a common device tree base,
extend the existing latter's GPUCC bindings and reuse them on the
former platform.
While not in the same file, it only makes sense to introduce the new
compatible in this commit as well.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_clk-v1-2-dbaeccb74884@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add new entry to the SM8450 dt-bindings for the SM8475 clocks.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818204348.197788-6-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
-----BEGIN PGP SIGNATURE-----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=dcCx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhwMACgkQYKtH/8kJ
UidKJw//UXXf/ap+0e8dY2++AW8fj1ir8CoZTMT9zuqO9HYtF/CRAv/Iw+rIGy/l
JSDyW2JgF+6nbn5hUJGvBeNMIyHKit3WjAAsBEmTqqya5Lo+fDCS4ZHvqoXdgWIF
1OLfQ0JqTcQsmSHqkhqbBgM+YONz6kfUOWatqfCq0PnBmKGAArxGmcFrJHlt9b5+
D1rf0GIgmBD2nCZVfSo5gzab0BlrqYQs0gAGHWz5mg8WPb2fuqlooxBqN/UDUZYM
4UGrgrGTYhj/wLiM9cWtASGuchFLohq7dbBiHYjcwH3KTKI83fPTHF6+iiRZLr57
9eptLpXZbFlFZY+Bou/2wRPvAAGXkdNRrt1wHP6XmZQonRIELZUaw+umKJww3B+w
8JEXYizgsPmQQQu2mtZjYmXoc8GpN8N7l+Ngt4H+ZtSetsDnUX02TnWF7zdY2QUr
MGpWwqWkIrnTavbgPL8/rcB0S20++VYoDfwjsnY73PB/HH95VT91fG+uf02Ll+8K
VAbJf+ebpYOW9n1SsT9C6CMJiWYjEIb+LumwCYWl3PZiv8URdEWCudqop36OVjUx
lTu0829gy0A4iKdQNrEMGEB3+/Yy0wAg7DzkyeVdjKh8iDUOVevJtb1I9PaccNzt
nhwrHfvwjzKKriKS+CRosaa0GKNVa4GSfPiLnMKhZ99LVvZLvrc=
=zjLL
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just like most of Qualcomm clock controllers, we can reference common
qcom,gcc.yaml schema to unify the common parts of the binding.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240605-dt-bindings-qcom-gcc-v2-16-f947b24f1283@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the graphics clock controller on Qualcomm
Technology Inc's SM8450 SoCs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-waipio-gpucc-v1-1-4f40e282af1d@linaro.org
