The CMN PLL block in the IPQ5018 SoC takes 96 MHZ as the reference
input clock. Its output clocks are the XO (24Mhz), sleep (32Khz), and
ethernet (50Mhz) clocks.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250516-ipq5018-cmn-pll-v4-2-389a6b30e504@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CMN PLL block in the IPQ5424 SoC takes 48 MHZ as the reference
input clock. The output clocks are the same as IPQ9574 SoC, except
for the clock rate of output clocks to PPE and NSS.
Also, add the new header file to export the CMN PLL output clock
specifiers for IPQ5424 SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250610-qcom_ipq5424_cmnpll-v3-1-ceada8165645@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CMN PLL controller provides clocks to networking hardware blocks
and to GCC on Qualcomm IPQ9574 SoC. It receives input clock from the
on-chip Wi-Fi, and produces output clocks at fixed rates. These output
rates are predetermined, and are unrelated to the input clock rate.
The primary purpose of CMN PLL is to supply clocks to the networking
hardware such as PPE (packet process engine), PCS and the externally
connected switch or PHY device. The CMN PLL block also outputs fixed
rate clocks to GCC, such as 24 MHZ as XO clock and 32 KHZ as sleep
clock supplied to GCC.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-1-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
