Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-27 15:36:48 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,381,929 Commits 7 Branches 779 Tags 4.4 GiB
loongarch-next
Commit Graph

3471 Commits

Author SHA1 Message Date
SeongJae Park
7c33c6c474 Docs/admin-guide/mm/damon: add DAMON_STAT usage document 
Document DAMON_STAT usage and add a link to it on DAMON admin-guide page.

Link: https://lkml.kernel.org/r/20250604183127.13968-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-07-09 22:41:56 -07:00
Chen Yu
db6cc3f4ac Revert "sched/numa: add statistics of numa balance task" 
This reverts commit ad6b26b6a0.

This commit introduces per-memcg/task NUMA balance statistics, but
unfortunately it introduced a NULL pointer exception due to the following
race condition: After a swap task candidate was chosen, its mm_struct
pointer was set to NULL due to task exit.  Later, when performing the
actual task swapping, the p->mm caused the problem.

CPU0                                   CPU1
:
...
task_numa_migrate
     task_numa_find_cpu
      task_numa_compare
        # a normal task p is chosen
        env->best_task = p

                                          # p exit:
                                          exit_signals(p);
                                             p->flags |= PF_EXITING
                                          exit_mm
                                             p->mm = NULL;

      migrate_swap_stop
        __migrate_swap_task((arg->src_task, arg->dst_cpu)
         count_memcg_event_mm(p->mm, NUMA_TASK_SWAP)# p->mm is NULL

task_lock() should be held and the PF_EXITING flag needs to be checked to
prevent this from happening.  After discussion, the conclusion was that
adding a lock is not worthwhile for some statistics calculations.  Revert
the change and rely on the tracepoint for this purpose.

Link: https://lkml.kernel.org/r/20250704135620.685752-1-yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/20250708064917.BBD13C4CEED@smtp.kernel.org
Fixes: ad6b26b6a0 ("sched/numa: add statistics of numa balance task")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Closes: https://lore.kernel.org/all/CAE4VaGBLJxpd=NeRJXpSCuw=REhC5LWJpC29kDy-Zh2ZDyzQZA@mail.gmail.com/
Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Reported-by: Suneeth D <Suneeth.D@amd.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Hladky <jhladky@redhat.com>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-07-09 21:07:56 -07:00
Bartosz Golaszewski
0cf6d425d3 gpio: sim: allow to mark simulated lines as invalid 
Add a new line-level, boolean property to the gpio-sim configfs
interface called 'valid'. It's set by default and the user can unset it
to make the line be included in the standard `gpio-reserved-ranges`
property when the chip is registered with GPIO core. This allows users
to specify which lines should not be available for requesting as GPIOs.

Link: https://lore.kernel.org/r/20250630130358.40352-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-07-09 16:48:49 +02:00
Sumeet Pawnikar
3ed92345e9 Documentation: Remove duplicate word size in bootconfig 
Remove duplicate word size in bootconfig.rst

Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250705151618.4806-1-sumeet4linux@gmail.com
 2025-07-08 08:11:10 -06:00
Salvatore Bonaccorso
0400a541ba Documentation/sysctl: coredump: add %F for pidfd number 
In commit b5325b2a27 ("coredump: hand a pidfd to the usermode coredump
helper") a new core_pattern specifier, %F, was added to provide a pidfs
to the usermode helper process referring to the crashed process.

Update the documentation to include the new core_pattern specifier.

Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250612060204.1159734-1-carnil@debian.org
 2025-06-21 14:20:46 -06:00
Shouye Liu
4613bf5fd0 Documentation: amd-pstate:fix minimum performance state label error 
In the AMD P-States Performance Scale diagram, the labels for "Max Perf"
and "Lowest Perf" were incorrectly used to define the range for
"Desired Perf".The "Desired performance target" should be bounded by the
"Maximum requested performance" and the "Minimum requested performance",
which corresponds to "Max Perf" and "Min Perf", respectively.

Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250620021658.92161-1-shouyeliu@gmail.com
 2025-06-21 14:11:00 -06:00
Shashank Balaji
221504a634 cpufreq: docs: userspace: Explain HW coordination influence 
Extend the "scaling_setspeed" sysfs attribute description in the
userspace governor documentation to cover possible differences
between the requested and actual CPU frequency.

Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20250527-userspace-governor-doc-v2-2-0e22c69920f2@sony.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:33:01 +02:00
Stephen Smalley
17bd3c0166 documentation: add links to SELinux resources 
Add links to the SELinux kernel subsystem README.md file, the
SELinux kernel wiki, and the SELinux userspace wiki to the
SELinux guide.

Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: spacing and style corrections, subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
 2025-06-18 15:12:54 -04:00
Matthew Wilcox (Oracle)
a39a6acc37 vmcoreinfo: Remove documentation of PG_slab and PG_hugetlb 
The changes to kernel/vmcore_info.c were sadly not reflected in the
documentation.  Rectify that for both these flags as well as adding
PAGE_UNACCEPTED_MAPCOUNT_VALUE.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250611155916.2579160-8-willy@infradead.org
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
 2025-06-18 13:06:27 +02:00
Matthew Wilcox (Oracle)
262e086f93 doc: Move SLUB documentation to the admin guide 
This section is supposed to be for internal documentation, while the
document is advice for sysadmins.  Move it to the appropriate place.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250611155916.2579160-2-willy@infradead.org
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
 2025-06-18 13:06:26 +02:00
Borislav Petkov (AMD)
d8010d4ba4 x86/bugs: Add a Transient Scheduler Attacks mitigation 
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.

Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
 2025-06-17 17:17:02 +02:00
Borislav Petkov (AMD)
f9af88a3d3 x86/bugs: Rename MDS machinery to something more generic 
It will be used by other x86 mitigations.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
 2025-06-16 18:45:18 +02:00
Baoquan He
aa9bb1b325 ima: add a knob ima= to allow disabling IMA in kdump kernel 
Kdump kernel doesn't need IMA functionality, and enabling IMA will cost
extra memory. It would be very helpful to allow IMA to be disabled for
kdump kernel.

Hence add a knob ima=on|off here to allow turning IMA off in kdump
kernel if needed.

Note that this IMA disabling is limited to kdump kernel, please don't
abuse it in other kernel and thus serious consequences are caused.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
 2025-06-16 09:15:13 -04:00
Dmitry Vyukov
a2fc422ed7 syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON 
There are two possible scenarios for syscall filtering:
 - having a trusted/allowed range of PCs, and intercepting everything else
 - or the opposite: a single untrusted/intercepted range and allowing
   everything else (this is relevant for any kind of sandboxing scenario,
   or monitoring behavior of a single library)

The current API only allows the former use case due to allowed
range wrap-around check. Add PR_SYS_DISPATCH_INCLUSIVE_ON that
enables the second use case.

Add PR_SYS_DISPATCH_EXCLUSIVE_ON alias for PR_SYS_DISPATCH_ON
to make it clear how it's different from the new
PR_SYS_DISPATCH_INCLUSIVE_ON.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/97947cc8e205ff49675826d7b0327ef2e2c66eea.1747839857.git.dvyukov@google.com
 2025-06-13 18:36:39 +02:00
Armin Wolf
c9de2e5c15
Documentation: ABI: Update WMI device paths in ABI docs 
The WMI driver core might append an ID to the WMI device name to avoid
name collisions in case multiple WMI devices with the same GUID are
present. Update all sysfs path referring to WMI devices to inform
users about this important detail.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250610055526.23688-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 2025-06-13 12:33:31 +03:00
Philipp Kerling
9331005366 smb: client: disable path remapping with POSIX extensions 
If SMB 3.1.1 POSIX Extensions are available and negotiated, the client
should be able to use all characters and not remap anything. Currently, the
user has to explicitly request this behavior by specifying the "nomapposix"
mount option.

Link: https://lore.kernel.org/4195bb677b33d680e77549890a4f4dd3b474ceaf.camel@rx2.rx-server.de
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
 2025-06-09 15:59:03 -05:00
Vishal Chourasia
38b9342ee6 Documentation: cgroup: add section explaining controller availability 
Add "Availability" section to Control Group v2 docs. It describes the
meaning of a controller being available in a cgroup, complementing the
existing "Enabling and Disabling" section.

This update improves the clarity of cgroup controller management by
explicitly distinguishing between:

1. Availability – when a controller is supported by the kernel and
   listed in "cgroup.controllers", making its interface files accessible
   in the cgroup's directory.
2. Enabling – when a controller is enabled via explicitly writing the
   name of the controller to "cgroup.subtree_control" to control
   distribution of resource across the cgroup's immediate children.

As an example, consider

/sys/fs/cgroup # cat cgroup.controllers
cpuset cpu io memory hugetlb pids misc
/sys/fs/cgroup # cat cgroup.subtree_control # No controllers enabled by default
/sys/fs/cgroup # echo +cpu +memory > cgroup.subtree_control # enabling "cpu" and "memory"
/sys/fs/cgroup # cat cgroup.subtree_control
cpu memory                   # cpu and memory enabled in /sys/fs/cgroup
/sys/fs/cgroup # mkdir foo_cgrp
/sys/fs/cgroup # cd foo_cgrp/
/sys/fs/cgroup/foo_cgrp # cat cgroup.controllers
cpu memory                   # cpu and memory available in 'foo_cgrp'
/sys/fs/cgroup/foo_cgrp # cat cgroup.subtree_control  # empty by default
/sys/fs/cgroup/foo_cgrp # ls
cgroup.controllers      cpu.max.burst           memory.numa_stat
cgroup.events           cpu.pressure            memory.oom.group
cgroup.freeze           cpu.stat                memory.peak
cgroup.kill             cpu.stat.local          memory.pressure
cgroup.max.depth        cpu.weight              memory.reclaim
cgroup.max.descendants  cpu.weight.nice         memory.stat
cgroup.pressure         io.pressure             memory.swap.current
cgroup.procs            memory.current          memory.swap.events
cgroup.stat             memory.events           memory.swap.high
cgroup.subtree_control  memory.events.local     memory.swap.max
cgroup.threads          memory.high             memory.swap.peak
cgroup.type             memory.low              memory.zswap.current
cpu.idle                memory.max              memory.zswap.max
cpu.max                 memory.min              memory.zswap.writeback

In this example, "cpu" and "memory" are enabled in the root cgroup,
making them available in "foo_cgrp". This exposes the corresponding
interface files in "foo_cgrp/", allowing resource control of processes
in that cgroup. However, these controllers are not yet enabled in
"foo_cgrp" itself.

Once a controller is available in a cgroup it can be used to resource
control processes of the cgroup.

Acked-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
 2025-06-09 08:05:13 -10:00
Kees Cook
de1c831a78 slab: Decouple slab_debug and no_hash_pointers 
Some system owners use slab_debug=FPZ (or similar) as a hardening option,
but do not want to be forced into having kernel addresses exposed due
to the implicit "no_hash_pointers" boot param setting.[1]

Introduce the "hash_pointers" boot param, which defaults to "auto"
(the current behavior), but also includes "always" (forcing on hashing
even when "slab_debug=..." is defined), and "never". The existing
"no_hash_pointers" boot param becomes an alias for "hash_pointers=never".

This makes it possible to boot with "slab_debug=FPZ hash_pointers=always".

Link: https://github.com/KSPP/linux/issues/368 [1]
Fixes: 792702911f ("slub: force on no_hash_pointers when slub_debug is enabled")
Co-developed-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20250415170232.it.467-kees@kernel.org
[kees@kernel.org: Add note about hash_pointers into slab_debug kernel parameter documentation.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
 2025-06-09 16:26:10 +02:00
Linus Torvalds
c0c9379f23 USB/Thunderbolt changes for 6.16-rc1 
Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
 Included in here are the following:
   - USB offload support for audio devices.  I think this takes the
     record for the most number of patch series (30+) over the longest
     period of time (2+ years) to get merged properly.  Many props go to
     Wesley Cheng for seeing this effort through, they took a major
     out-of-tree hacked-up-monstrosity that was created by multiple
     vendors for their specific devices, got it all merged into a
     semi-coherent set of changes, and got all of the different major
     subsystems to agree on how this should be implemented both with
     changes to their code as well as userspace apis, AND wrangled the
     hardware companies into agreeing to go forward with this, despite
     making them all redo work they had already done in their private
     device trees.  This feature offers major power savings on embedded
     devices where a USB audio stream can continue to flow while the rest
     of the system is sleeping, something that devices running on battery
     power really care about.  There are still some more small tweaks
     left to be done here, and those patches are still out for review and
     arguing among the different hardware companies, but this is a major
     step forward and a great example of how to do upstream development
     well.
   - small number of thunderbolt fixes and updates, things seem to be
     slowing down here (famous last words...)
   - xhci refactors and reworking to try to handle some rough corner
     cases in some hardware implementations where things don't always
     work properly
   - typec driver updates
   - USB3 power management reworking and updates
   - Removal of some old and orphaned UDC gadget drivers that had not
     been used in a very long time, dropping over 11 thousand lines from
     the tree, always a nice thing, making up for the 12k lines added for
     the USB offload feature.
   - lots of little updates and fixes in different drivers
 
 All of these have been in linux-next for over 2 weeks, the USB offload
 logic has been in there for 8 weeks now, with no reported issues
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKnpA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym3zQCgz+Oz3DHfLcYOX7evGI2PjI4GNMkAoJa6Kndw
 h4YgL+8MeBpKuHCQvxy8
 =KVAn
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
  Included in here are the following:

   - USB offload support for audio devices.

     I think this takes the record for the most number of patch series
     (30+) over the longest period of time (2+ years) to get merged
     properly.

     Many props go to Wesley Cheng for seeing this effort through, they
     took a major out-of-tree hacked-up-monstrosity that was created by
     multiple vendors for their specific devices, got it all merged into
     a semi-coherent set of changes, and got all of the different major
     subsystems to agree on how this should be implemented both with
     changes to their code as well as userspace apis, AND wrangled the
     hardware companies into agreeing to go forward with this, despite
     making them all redo work they had already done in their private
     device trees.

     This feature offers major power savings on embedded devices where a
     USB audio stream can continue to flow while the rest of the system
     is sleeping, something that devices running on battery power really
     care about. There are still some more small tweaks left to be done
     here, and those patches are still out for review and arguing among
     the different hardware companies, but this is a major step forward
     and a great example of how to do upstream development well.

   - small number of thunderbolt fixes and updates, things seem to be
     slowing down here (famous last words...)

   - xhci refactors and reworking to try to handle some rough corner
     cases in some hardware implementations where things don't always
     work properly

   - typec driver updates

   - USB3 power management reworking and updates

   - Removal of some old and orphaned UDC gadget drivers that had not
     been used in a very long time, dropping over 11 thousand lines from
     the tree, always a nice thing, making up for the 12k lines added
     for the USB offload feature.

   - lots of little updates and fixes in different drivers

  All of these have been in linux-next for over 2 weeks, the USB offload
  logic has been in there for 8 weeks now, with no reported issues"

* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  ALSA: usb-audio: qcom: fix USB_XHCI dependency
  ASoC: qdsp6: fix compile-testing without CONFIG_OF
  usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
  usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
  USB: typec: fix const issue in typec_match()
  USB: gadget: udc: fix const issue in gadget_match_driver()
  USB: gadget: fix up const issue with struct usb_function_instance
  USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
  USB: serial: bus: fix const issue in usb_serial_device_match()
  usb: usbtmc: Fix timeout value in get_stb
  usb: usbtmc: Fix read_stb function and get_stb ioctl
  ALSA: qc_audio_offload: try to reduce address space confusion
  ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
  ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
  ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
  usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
  dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
  usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
  usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
  usb: gadget: epautoconf: Use USB API functions rather than constants
  ...
 2025-06-06 12:45:35 -07:00
Linus Torvalds
e9e668cd27 arm64 fixes for -rc1 
- Disable problematic linker assertions for broken versions of LLD.
 
 - Work around sporadic link failure with LLD and various randconfig
   builds.
 
 - Fix missing invalidation in the TLB batching code when reclaim races
   with mprotect() and friends.
 
 - Add a command-line override for MPAM to allow booting on systems with
   broken firmware.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmhBcycQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNDwWCACtc4Jw3wwkmaiiP9Ner1/7wKq8xRLC2WRU
 tJjWLSkeoTthxf0DZILc61rNpOalfaRK774/Xo0OiYOBpKeAi5cSaUYMyabVJGcK
 k1R0KXDUu8oS6xKXmXyeuBV2pK4v4aET3E6lzUQZfvamhzuZfCvvKKrF5K8vv5Ph
 eowBMWKugMrwXMOBkRgVopppobdneFuVvnoMlNNYWOy70wDekoPV3qizoVJG/ulQ
 BTFunXX8Otufrm48Ye2bYalfwoiGdUQaJz/gRuHko0o3SOhqR3qZp2DWxQgBwJ+g
 VI6/dRLnVQpdg6toTvS9jzPczVfLt4/5VhLevbBcJuaUOER4SOZl
 =cfnk
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "We've got a couple of build fixes when using LLD, a missing TLB
  invalidation and a workaround for broken firmware on SoCs with CPUs
  that implement MPAM:

   - Disable problematic linker assertions for broken versions of LLD

   - Work around sporadic link failure with LLD and various randconfig
     builds

   - Fix missing invalidation in the TLB batching code when reclaim
     races with mprotect() and friends

   - Add a command-line override for MPAM to allow booting on systems
     with broken firmware"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Add override for MPAM
  arm64/mm: Close theoretical race where stale TLB entry remains valid
  arm64: Work around convergence issue with LLD linker
  arm64: Disable LLD linker ASSERT()s for the time being
 2025-06-05 11:39:17 -07:00
Linus Torvalds
fd1f847350 - The 2 patch series "zram: support algorithm-specific parameters" from 
Sergey Senozhatsky adds infrastructure for passing algorithm-specific
   parameters into zram.  A single parameter `winbits' is implemented at
   this time.
 
 - The 5 patch series "memcg: nmi-safe kmem charging" from Shakeel Butt
   makes memcg charging nmi-safe, which is required by BFP, which can
   operate in NMI context.
 
 - The 5 patch series "Some random fixes and cleanup to shmem" from
   Kemeng Shi implements small fixes and cleanups in the shmem code.
 
 - The 2 patch series "Skip mm selftests instead when kernel features are
   not present" from Zi Yan fixes some issues in the MM selftest code.
 
 - The 2 patch series "mm/damon: build-enable essential DAMON components
   by default" from SeongJae Park reworks DAMON Kconfig to make it easier
   to enable CONFIG_DAMON.
 
 - The 2 patch series "sched/numa: add statistics of numa balance task
   migration" from Libo Chen adds more info into sysfs and procfs files to
   improve visibility into the NUMA balancer's task migration activity.
 
 - The 4 patch series "selftests/mm: cow and gup_longterm cleanups" from
   Mark Brown provides various updates to some of the MM selftests to make
   them play better with the overall containing framework.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDzA9wAKCRDdBJ7gKXxA
 js8sAP9V3COg+vzTmimzP3ocTkkbbIJzDfM6nXpE2EQ4BR3ejwD+NsIT2ZLtTF6O
 LqAZpgO7ju6wMjR/lM30ebCq5qFbZAw=
 =oruw
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more MM updates from Andrew Morton:

 - "zram: support algorithm-specific parameters" from Sergey Senozhatsky
   adds infrastructure for passing algorithm-specific parameters into
   zram. A single parameter `winbits' is implemented at this time.

 - "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
   charging nmi-safe, which is required by BFP, which can operate in NMI
   context.

 - "Some random fixes and cleanup to shmem" from Kemeng Shi implements
   small fixes and cleanups in the shmem code.

 - "Skip mm selftests instead when kernel features are not present" from
   Zi Yan fixes some issues in the MM selftest code.

 - "mm/damon: build-enable essential DAMON components by default" from
   SeongJae Park reworks DAMON Kconfig to make it easier to enable
   CONFIG_DAMON.

 - "sched/numa: add statistics of numa balance task migration" from Libo
   Chen adds more info into sysfs and procfs files to improve visibility
   into the NUMA balancer's task migration activity.

 - "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
   provides various updates to some of the MM selftests to make them
   play better with the overall containing framework.

* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
  mm/khugepaged: clean up refcount check using folio_expected_ref_count()
  selftests/mm: fix test result reporting in gup_longterm
  selftests/mm: report unique test names for each cow test
  selftests/mm: add helper for logging test start and results
  selftests/mm: use standard ksft_finished() in cow and gup_longterm
  selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
  sched/numa: add statistics of numa balance task
  sched/numa: fix task swap by skipping kernel threads
  tools/testing: check correct variable in open_procmap()
  tools/testing/vma: add missing function stub
  mm/gup: update comment explaining why gup_fast() disables IRQs
  selftests/mm: two fixes for the pfnmap test
  mm/khugepaged: fix race with folio split/free using temporary reference
  mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
  mmu_notifiers: remove leftover stub macros
  selftests/mm: deduplicate test names in madv_populate
  kcov: rust: add flags for KCOV with Rust
  mm: rust: make CONFIG_MMU ifdefs more narrow
  mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
  mm/damon/Kconfig: enable CONFIG_DAMON by default
  ...
 2025-06-02 16:00:26 -07:00
Xi Ruoyao
10f885d63a arm64: Add override for MPAM 
As the message of the commit 09e6b306f3 ("arm64: cpufeature: discover
CPU support for MPAM") already states, if a buggy firmware fails to
either enable MPAM or emulate the trap as if it were disabled, the
kernel will just fail to boot.  While upgrading the firmware should be
the best solution, we have some hardware of which the vendor have made
no response 2 months after we requested a firmware update.  Allow
overriding it so our devices don't become some e-waste.

Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Mingcong Bai <jeffbai@aosc.io>
Cc: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250602043723.216338-1-xry111@xry111.site
Signed-off-by: Will Deacon <will@kernel.org>
 2025-06-02 13:49:09 +01:00
Chen Yu
ad6b26b6a0 sched/numa: add statistics of numa balance task 
On systems with NUMA balancing enabled, it has been found that tracking
task activities resulting from NUMA balancing is beneficial.  NUMA
balancing employs two mechanisms for task migration: one is to migrate
a task to an idle CPU within its preferred node, and the other is to
swap tasks located on different nodes when they are on each other's
preferred nodes.

The kernel already provides NUMA page migration statistics in
/sys/fs/cgroup/mytest/memory.stat and /proc/{PID}/sched.  However, it
lacks statistics regarding task migration and swapping.  Therefore,
relevant counts for task migration and swapping should be added.

The following two new fields:

numa_task_migrated
numa_task_swapped

will be shown in /sys/fs/cgroup/{GROUP}/memory.stat, /proc/{PID}/sched
and /proc/vmstat.

Introducing both per-task and per-memory cgroup (memcg) NUMA balancing
statistics facilitates a rapid evaluation of the performance and
resource utilization of the target workload.  For instance, users can
first identify the container with high NUMA balancing activity and then
further pinpoint a specific task within that group, and subsequently
adjust the memory policy for that task.  In short, although it is
possible to iterate through /proc/$pid/sched to locate the problematic
task, the introduction of aggregated NUMA balancing activity for tasks
within each memcg can assist users in identifying the task more
efficiently through a divide-and-conquer approach.

As Libo Chen pointed out, the memcg event relies on the text names in
vmstat_text, and /proc/vmstat generates corresponding items based on
vmstat_text.  Thus, the relevant task migration and swapping events
introduced in vmstat_text also need to be populated by
count_vm_numa_event(), otherwise these values are zero in /proc/vmstat.

In theory, task migration and swap events are part of the scheduler's
activities.  The reason for exposing them through the
memory.stat/vmstat interface is that we already have NUMA balancing
statistics in memory.stat/vmstat, and these events are closely related
to each other.  Following Shakeel's suggestion, we describe the
end-to-end flow/story of all these events occurring on a timeline for
future reference:

The goal of NUMA balancing is to co-locate a task and its memory pages
on the same NUMA node.  There are two strategies: migrate the pages to
the task's node, or migrate the task to the node where its pages
reside.

Suppose a task p1 is running on Node 0, but its pages are located on
Node 1.  NUMA page fault statistics for p1 reveal its "page footprint"
across nodes.  If NUMA balancing detects that most of p1's pages are on
Node 1:

1.Page Migration Attempt:
The Numa balance first tries to migrate p1's pages to Node 0.
The numa_page_migrate counter increments.

2.Task Migration Strategies:
After the page migration finishes, Numa balance checks every
1 second to see if p1 can be migrated to Node 1.

Case 2.1: Idle CPU Available

  If Node 1 has an idle CPU, p1 is directly scheduled there.  This
  event is logged as numa_task_migrated.

Case 2.2: No Idle CPU (Task Swap)

  If all CPUs on Node1 are busy, direct migration could cause CPU
  contention or load imbalance.  Instead: The Numa balance selects a
  candidate task p2 on Node 1 that prefers Node 0 (e.g., due to its own
  page footprint).  p1 and p2 are swapped.  This cross-node swap is
  recorded as numa_task_swapped.

Link: https://lkml.kernel.org/r/d00edb12ba0f0de3c5222f61487e65f2ac58f5b1.1748493462.git.yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/7ef90a88602ed536be46eba7152ed0d33bad5790.1748002400.git.yu.c.chen@intel.com
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aubrey Li <aubrey.li@intel.com>
Cc: Ayush Jain <Ayush.jain3@amd.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-31 22:46:15 -07:00
Linus Torvalds
7d4e49a77d - The 3 patch series "hung_task: extend blocking task stacktrace dump to 
semaphore" from Lance Yang enhances the hung task detector.  The
   detector presently dumps the blocking tasks's stack when it is blocked
   on a mutex.  Lance's series extends this to semaphores.
 
 - The 2 patch series "nilfs2: improve sanity checks in dirty state
   propagation" from Wentao Liang addresses a couple of minor flaws in
   nilfs2.
 
 - The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
   Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
 
 - The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
   volume keys" from Coiby Xu addresses a usability problem with kdump.
   When the dump device is LUKS-encrypted, the kdump kernel may not have
   the keys to the encrypted filesystem.  A full writeup of this is in the
   series [0/N] cover letter.
 
 - The 2 patch series "sysfs: add counters for lockups and stalls" from
   Max Kellermann adds /sys/kernel/hardlockup_count and
   /sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
 
 - The 3 patch series "fork: Page operation cleanups in the fork code"
   from Pasha Tatashin implements a number of code cleanups in fork.c.
 
 - The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
   s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
   the gdb scripts.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
 jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
 Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
 =g45L
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - "hung_task: extend blocking task stacktrace dump to semaphore" from
   Lance Yang enhances the hung task detector.

   The detector presently dumps the blocking tasks's stack when it is
   blocked on a mutex. Lance's series extends this to semaphores

 - "nilfs2: improve sanity checks in dirty state propagation" from
   Wentao Liang addresses a couple of minor flaws in nilfs2

 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
   fixes a couple of issues in the gdb scripts

 - "Support kdump with LUKS encryption by reusing LUKS volume keys" from
   Coiby Xu addresses a usability problem with kdump.

   When the dump device is LUKS-encrypted, the kdump kernel may not have
   the keys to the encrypted filesystem. A full writeup of this is in
   the series [0/N] cover letter

 - "sysfs: add counters for lockups and stalls" from Max Kellermann adds
   /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
   /sys/kernel/rcu_stall_count

 - "fork: Page operation cleanups in the fork code" from Pasha Tatashin
   implements a number of code cleanups in fork.c

 - "scripts/gdb/symbols: determine KASLR offset on s390 during early
   boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
   scripts

* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
  llist: make llist_add_batch() a static inline
  delayacct: remove redundant code and adjust indentation
  squashfs: add optional full compressed block caching
  crash_dump, nvme: select CONFIGFS_FS as built-in
  scripts/gdb/symbols: determine KASLR offset on s390 during early boot
  scripts/gdb/symbols: factor out pagination_off()
  scripts/gdb/symbols: factor out get_vmlinux()
  kernel/panic.c: format kernel-doc comments
  mailmap: update and consolidate Casey Connolly's name and email
  nilfs2: remove wbc->for_reclaim handling
  fork: define a local GFP_VMAP_STACK
  fork: check charging success before zeroing stack
  fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
  fork: clean-up ifdef logic around stack allocation
  kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
  kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
  x86/crash: make the page that stores the dm crypt keys inaccessible
  x86/crash: pass dm crypt keys to kdump kernel
  Revert "x86/mm: Remove unused __set_memory_prot()"
  crash_dump: retrieve dm crypt keys in kdump kernel
  ...
 2025-05-31 19:12:53 -07:00
Linus Torvalds
00c010e130 - The 11 patch series "Add folio_mk_pte()" from Matthew Wilcox 
simplifies the act of creating a pte which addresses the first page in a
   folio and reduces the amount of plumbing which architecture must
   implement to provide this.
 
 - The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox
   is a shower of largely unrelated folio infrastructure changes which
   clean things up and better prepare us for future work.
 
 - The 3 patch series "memory,x86,acpi: hotplug memory alignment
   advisement" from Gregory Price adds early-init code to prevent x86 from
   leaving physical memory unused when physical address regions are not
   aligned to memory block size.
 
 - The 2 patch series "mm/compaction: allow more aggressive proactive
   compaction" from Michal Clapinski provides some tuning of the (sadly,
   hard-coded (more sadly, not auto-tuned)) thresholds for our invokation
   of proactive compaction.  In a simple test case, the reduction of a guest
   VM's memory consumption was dramatic.
 
 - The 8 patch series "Minor cleanups and improvements to swap freeing
   code" from Kemeng Shi provides some code cleaups and a small efficiency
   improvement to this part of our swap handling code.
 
 - The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API"
   from Dmitry Levin adds the ability for a ptracer to modify syscalls
   arguments.  At this time we can alter only "system call information that
   are used by strace system call tampering, namely, syscall number,
   syscall arguments, and syscall return value.
 
   This series should have been incorporated into mm.git's "non-MM"
   branch, but I goofed.
 
 - The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report
   guard regions" from Andrei Vagin extends the info returned by the
   PAGEMAP_SCAN ioctl against /proc/pid/pagemap.  This permits CRIU to more
   efficiently get at the info about guard regions.
 
 - The 2 patch series "Fix parameter passed to page_mapcount_is_type()"
   from Gavin Shan implements that fix.  No runtime effect is expected
   because validate_page_before_insert() happens to fix up this error.
 
 - The 3 patch series "kernel/events/uprobes: uprobe_write_opcode()
   rewrite" from David Hildenbrand basically brings uprobe text poking into
   the current decade.  Remove a bunch of hand-rolled implementation in
   favor of using more current facilities.
 
 - The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64"
   from Anshuman Khandual provides enhancements and generalizations to the
   pte dumping code.  This might be needed when 128-bit Page Table
   Descriptors are enabled for ARM.
 
 - The 12 patch series "Always call constructor for kernel page tables"
   from Kevin Brodsky "ensures that the ctor/dtor is always called for
   kernel pgtables, as it already is for user pgtables".  This permits the
   addition of more functionality such as "insert hooks to protect page
   tables".  This change does result in various architectures performing
   unnecesary work, but this is fixed up where it is anticipated to occur.
 
 - The 9 patch series "Rust support for mm_struct, vm_area_struct, and
   mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM
   structures.
 
 - The 3 patch series "fix incorrectly disallowed anonymous VMA merges"
   from Lorenzo Stoakes takes advantage of some VMA merging opportunities
   which we've been missing for 15 years.
 
 - The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED
   and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB
   flushing.  Instead of flushing each address range in the provided iovec,
   we batch the flushing across all the iovec entries.  The syscall's cost
   was approximately halved with a microbenchmark which was designed to
   load this particular operation.
 
 - The 6 patch series "Track node vacancy to reduce worst case allocation
   counts" from Sidhartha Kumar makes the maple tree smarter about its node
   preallocation.  stress-ng mmap performance increased by single-digit
   percentages and the amount of unnecessarily preallocated memory was
   dramaticelly reduced.
 
 - The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from
   Baoquan He removes a few unnecessary things which Baoquan noted when
   reading the code.
 
 - The 3 patch series ""Enhance sysfs handling for memory hotplug in
   weighted interleave" from Rakie Kim "enhances the weighted interleave
   policy in the memory management subsystem by improving sysfs handling,
   fixing memory leaks, and introducing dynamic sysfs updates for memory
   hotplug support".  Fixes things on error paths which we are unlikely to
   hit.
 
 - The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups
   including tiered memory" from SeongJae Park introduces new DAMOS quota
   goal metrics which eliminate the manual tuning which is required when
   utilizing DAMON for memory tiering.
 
 - The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from
   Baoquan He provides cleanups and small efficiency improvements which
   Baoquan found via code inspection.
 
 - The 2 patch series "vmscan: enforce mems_effective during demotion"
   from Gregory Price "changes reclaim to respect cpuset.mems_effective
   during demotion when possible".  because "presently, reclaim explicitly
   ignores cpuset.mems_effective when demoting, which may cause the cpuset
   settings to violated." "This is useful for isolating workloads on a
   multi-tenant system from certain classes of memory more consistently."
 
 - The 2 patch series ""Clean up split_huge_pmd_locked() and remove
   unnecessary folio pointers" from Gavin Guo provides minor cleanups and
   efficiency gains in in the huge page splitting and migrating code.
 
 - The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang
   creates a slab cache for `struct mem_cgroup', yielding improved memory
   utilization.
 
 - The 4 patch series "add max arg to swappiness in memory.reclaim and
   lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness="
   argument for memory.reclaim MGLRU's lru_gen.  This directs proactive
   reclaim to reclaim from only anon folios rather than file-backed folios.
 
 - The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike
   Rapoport is the first step on the path to permitting the kernel to
   maintain existing VMs while replacing the host kernel via file-based
   kexec.  At this time only memblock's reserve_mem is preserved.
 
 - The 7 patch series "mm: Introduce for_each_valid_pfn()" from David
   Woodhouse provides and uses a smarter way of looping over a pfn range.
   By skipping ranges of invalid pfns.
 
 - The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to
   one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless
   VMA scanning when a task is pinned a single NUMA mode.  Dramatic
   performance benefits were seen in some real world cases.
 
 - The 2 patch series "JFS: Implement migrate_folio for
   jfs_metapage_aops" from Shivank Garg addresses a warning which occurs
   during memory compaction when using JFS.
 
 - The 4 patch series "move all VMA allocation, freeing and duplication
   logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c
   into the more appropriate mm/vma.c.
 
 - The 6 patch series "mm, swap: clean up swap cache mapping helper" from
   Kairui Song provides code consolidation and cleanups related to the
   folio_index() function.
 
 - The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal
   Moola does that.
 
 - The 8 patch series "memcg: Fix test_memcg_min/low test failures" from
   Waiman Long addresses some bogus failures which are being reported by
   the test_memcontrol selftest.
 
 - The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare
   hook" from Lorenzo Stoakes commences the deprecation of
   file_operations.mmap() in favor of the new
   file_operations.mmap_prepare().  The latter is more restrictive and
   prevents drivers from messing with things in ways which, amongst other
   problems, may defeat VMA merging.
 
 - The 4 patch series "memcg: decouple memcg and objcg stocks"" from
   Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's
   one.  This is a step along the way to making memcg and objcg charging
   NMI-safe, which is a BPF requirement.
 
 - The 6 patch series "mm/damon: minor fixups and improvements for code,
   tests, and documents" from SeongJae Park is "yet another batch of
   miscellaneous DAMON changes.  Fix and improve minor problems in code,
   tests and documents."
 
 - The 7 patch series "memcg: make memcg stats irq safe" from Shakeel
   Butt converts memcg stats to be irq safe.  Another step along the way to
   making memcg charging and stats updates NMI-safe, a BPF requirement.
 
 - The 4 patch series "Let unmap_hugepage_range() and several related
   functions take folio instead of page" from Fan Ni provides folio
   conversions in the hugetlb code.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA
 ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x
 Qqb/UGMEpilyre1PayQqOnct3aSL9Ao=
 =tYYm
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
   creating a pte which addresses the first page in a folio and reduces
   the amount of plumbing which architecture must implement to provide
   this.

 - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
   largely unrelated folio infrastructure changes which clean things up
   and better prepare us for future work.

 - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
   Price adds early-init code to prevent x86 from leaving physical
   memory unused when physical address regions are not aligned to memory
   block size.

 - "mm/compaction: allow more aggressive proactive compaction" from
   Michal Clapinski provides some tuning of the (sadly, hard-coded (more
   sadly, not auto-tuned)) thresholds for our invokation of proactive
   compaction. In a simple test case, the reduction of a guest VM's
   memory consumption was dramatic.

 - "Minor cleanups and improvements to swap freeing code" from Kemeng
   Shi provides some code cleaups and a small efficiency improvement to
   this part of our swap handling code.

 - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
   adds the ability for a ptracer to modify syscalls arguments. At this
   time we can alter only "system call information that are used by
   strace system call tampering, namely, syscall number, syscall
   arguments, and syscall return value.

   This series should have been incorporated into mm.git's "non-MM"
   branch, but I goofed.

 - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
   Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
   against /proc/pid/pagemap. This permits CRIU to more efficiently get
   at the info about guard regions.

 - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
   implements that fix. No runtime effect is expected because
   validate_page_before_insert() happens to fix up this error.

 - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
   Hildenbrand basically brings uprobe text poking into the current
   decade. Remove a bunch of hand-rolled implementation in favor of
   using more current facilities.

 - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
   Khandual provides enhancements and generalizations to the pte dumping
   code. This might be needed when 128-bit Page Table Descriptors are
   enabled for ARM.

 - "Always call constructor for kernel page tables" from Kevin Brodsky
   ensures that the ctor/dtor is always called for kernel pgtables, as
   it already is for user pgtables.

   This permits the addition of more functionality such as "insert hooks
   to protect page tables". This change does result in various
   architectures performing unnecesary work, but this is fixed up where
   it is anticipated to occur.

 - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
   Ryhl adds plumbing to permit Rust access to core MM structures.

 - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
   Stoakes takes advantage of some VMA merging opportunities which we've
   been missing for 15 years.

 - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
   SeongJae Park optimizes process_madvise()'s TLB flushing.

   Instead of flushing each address range in the provided iovec, we
   batch the flushing across all the iovec entries. The syscall's cost
   was approximately halved with a microbenchmark which was designed to
   load this particular operation.

 - "Track node vacancy to reduce worst case allocation counts" from
   Sidhartha Kumar makes the maple tree smarter about its node
   preallocation.

   stress-ng mmap performance increased by single-digit percentages and
   the amount of unnecessarily preallocated memory was dramaticelly
   reduced.

 - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
   a few unnecessary things which Baoquan noted when reading the code.

 - ""Enhance sysfs handling for memory hotplug in weighted interleave"
   from Rakie Kim "enhances the weighted interleave policy in the memory
   management subsystem by improving sysfs handling, fixing memory
   leaks, and introducing dynamic sysfs updates for memory hotplug
   support". Fixes things on error paths which we are unlikely to hit.

 - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
   from SeongJae Park introduces new DAMOS quota goal metrics which
   eliminate the manual tuning which is required when utilizing DAMON
   for memory tiering.

 - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
   provides cleanups and small efficiency improvements which Baoquan
   found via code inspection.

 - "vmscan: enforce mems_effective during demotion" from Gregory Price
   changes reclaim to respect cpuset.mems_effective during demotion when
   possible. because presently, reclaim explicitly ignores
   cpuset.mems_effective when demoting, which may cause the cpuset
   settings to violated.

   This is useful for isolating workloads on a multi-tenant system from
   certain classes of memory more consistently.

 - "Clean up split_huge_pmd_locked() and remove unnecessary folio
   pointers" from Gavin Guo provides minor cleanups and efficiency gains
   in in the huge page splitting and migrating code.

 - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
   for `struct mem_cgroup', yielding improved memory utilization.

 - "add max arg to swappiness in memory.reclaim and lru_gen" from
   Zhongkun He adds a new "max" argument to the "swappiness=" argument
   for memory.reclaim MGLRU's lru_gen.

   This directs proactive reclaim to reclaim from only anon folios
   rather than file-backed folios.

 - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
   first step on the path to permitting the kernel to maintain existing
   VMs while replacing the host kernel via file-based kexec. At this
   time only memblock's reserve_mem is preserved.

 - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
   and uses a smarter way of looping over a pfn range. By skipping
   ranges of invalid pfns.

 - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
   cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
   when a task is pinned a single NUMA mode.

   Dramatic performance benefits were seen in some real world cases.

 - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
   Garg addresses a warning which occurs during memory compaction when
   using JFS.

 - "move all VMA allocation, freeing and duplication logic to mm" from
   Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
   appropriate mm/vma.c.

 - "mm, swap: clean up swap cache mapping helper" from Kairui Song
   provides code consolidation and cleanups related to the folio_index()
   function.

 - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.

 - "memcg: Fix test_memcg_min/low test failures" from Waiman Long
   addresses some bogus failures which are being reported by the
   test_memcontrol selftest.

 - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
   Stoakes commences the deprecation of file_operations.mmap() in favor
   of the new file_operations.mmap_prepare().

   The latter is more restrictive and prevents drivers from messing with
   things in ways which, amongst other problems, may defeat VMA merging.

 - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
   the per-cpu memcg charge cache from the objcg's one.

   This is a step along the way to making memcg and objcg charging
   NMI-safe, which is a BPF requirement.

 - "mm/damon: minor fixups and improvements for code, tests, and
   documents" from SeongJae Park is yet another batch of miscellaneous
   DAMON changes. Fix and improve minor problems in code, tests and
   documents.

 - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
   stats to be irq safe. Another step along the way to making memcg
   charging and stats updates NMI-safe, a BPF requirement.

 - "Let unmap_hugepage_range() and several related functions take folio
   instead of page" from Fan Ni provides folio conversions in the
   hugetlb code.

* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
  mm: pcp: increase pcp->free_count threshold to trigger free_high
  mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
  mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
  mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
  mm/hugetlb: pass folio instead of page to unmap_ref_private()
  memcg: objcg stock trylock without irq disabling
  memcg: no stock lock for cpu hot-unplug
  memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
  memcg: make count_memcg_events re-entrant safe against irqs
  memcg: make mod_memcg_state re-entrant safe against irqs
  memcg: move preempt disable to callers of memcg_rstat_updated
  memcg: memcg_rstat_updated re-entrant safe against irqs
  mm: khugepaged: decouple SHMEM and file folios' collapse
  selftests/eventfd: correct test name and improve messages
  alloc_tag: check mem_profiling_support in alloc_tag_init
  Docs/damon: update titles and brief introductions to explain DAMOS
  selftests/damon/_damon_sysfs: read tried regions directories in order
  mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
  mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
  mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
  ...
 2025-05-31 15:44:16 -07:00
Linus Torvalds
dee264c16a require gcc-8 and binutils-2.30 
x86 already uses gcc-8 as the minimum version, this changes all other
 architectures to the same version. gcc-8 is used is Debian 10 and Red
 Hat Enterprise Linux 8, both of which are still supported, and binutils
 2.30 is the oldest corresponding version on those. Ubuntu Pro 18.04 and
 SUSE Linux Enterprise Server 15 both use gcc-7 as the system compiler
 but additionally include toolchains that remain supported.
 
 With the new minimum toolchain versions, a number of workarounds for older
 versions can be dropped, in particular on x86_64 and arm64.  Importantly,
 the updated compiler version allows removing two of the five remaining
 gcc plugins, as support for sancov and structeak features is already
 included in modern compiler versions.
 
 I tried collecting the known changes that are possible based on the
 new toolchain version, but expect that more cleanups will be possible.
 Since this touches multiple architectures, I merged the patches through
 the asm-generic tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmg6vNMACgkQmmx57+YA
 GNkOmg/+LtR9B2P27GPBeG8HnLTZ8hKELiyYeSk6ZFgQv5hevE37HV35Yru7e7gu
 wcF6CgYr8ff4CVcHM7y0790oGew1thkqq5CklFIH0EwCDJx/mWfZR1SS2jfZIEWM
 HSDOlQQd1S8oWia14tSnQos3nW3CB9/ABVTHH+Wvl3xn48WMRvgK2LJgGLuxJrt8
 5DD9auHiLjchWB5tB4DU98IgWWgFUGMTsI6IayZ4dkF4CdWqd89h0Y3pjJYeBgHS
 mPxzR2q8WjEmG9hp7QuZQgn/pAYleJAwHvvkoLrkQ2ieqx3FjWiwFbQp4CG1Sc8L
 eBR1lnkqS2z/e7xJLfe86fOoKWWu4I0tZKhRan/0+UOGm5nXrGpqSxKS8ZDsRuAp
 3fvyhIp1cYSa7Xkok8BFhLEFR0tguXJXnXBc3tWE5VXIfFNd0Ohh1GUYhXDAqWKh
 i0jN9dSNhokM3AqBi6qZl5kmBnRA3UsIaOg3QRrqN8IlBPp+u7i5xsrJIUWvD95o
 TO06admmLcCJT8n6ZfNVfRjBgzu8+t54UVaDx9YYwxoNGOSFwqOb8CSPTWPxLmDr
 RKDUOvO8DBlP7uFz9neP+LxluA3DjurRZvb0z0AmCZ8/RXEmTMCyfP5a6esxquXt
 0Bqo6hM9q+TeXTHNS1CNvqLSWWikw+AzS/ZPPvriYFn5lxtbq6c=
 =pdDC
 -----END PGP SIGNATURE-----

Merge tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull compiler version requirement update from Arnd Bergmann:
 "Require gcc-8 and binutils-2.30

  x86 already uses gcc-8 as the minimum version, this changes all other
  architectures to the same version. gcc-8 is used is Debian 10 and Red
  Hat Enterprise Linux 8, both of which are still supported, and
  binutils 2.30 is the oldest corresponding version on those.

  Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
  the system compiler but additionally include toolchains that remain
  supported.

  With the new minimum toolchain versions, a number of workarounds for
  older versions can be dropped, in particular on x86_64 and arm64.
  Importantly, the updated compiler version allows removing two of the
  five remaining gcc plugins, as support for sancov and structeak
  features is already included in modern compiler versions.

  I tried collecting the known changes that are possible based on the
  new toolchain version, but expect that more cleanups will be possible.

  Since this touches multiple architectures, I merged the patches
  through the asm-generic tree."

* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
  Documentation: update binutils-2.30 version reference
  gcc-plugins: remove SANCOV gcc plugin
  Kbuild: remove structleak gcc plugin
  arm64: drop binutils version checks
  raid6: skip avx512 checks
  kbuild: require gcc-8 and binutils-2.30
 2025-05-31 08:16:52 -07:00
Linus Torvalds
1193e205db platform-drivers-x86 for v6.16-1 
Highlights:
 
  - alienware-wmi-wmax:
 
    - Add HWMON support
 
    - Add ABI and admin-guide documentation
 
    - Expose GPIO debug methods through debug FS
 
    - Support manual fan control and "custom" thermal profile
 
  - amd/hsmp:
 
    - Add sysfs files to show HSMP telemetry
 
    - Report power readings and limits via hwmon
 
  - amd/isp4: Add AMD ISP platform config for OV05C10
 
  - asus-wmi:
 
    - Refactor Ally suspend/resume to work better with older FW
 
    - hid-asus: check ROG Ally MCU version and warn about old FW versions
 
  - dasharo-acpi: Add driver for Dasharo devices supporting fans and
                  temperatures monitoring
 
  - dell-ddv:
 
    - Expose the battery health and manufacture date to userspace using
      power supply extensions
 
    - Implement the battery matching algorithm
 
  - dell-pc:
 
   - Improve error propagation
 
   - Use faux device
 
  - int3472:
 
    - Add delays to avoid GPIO regulator spikes
 
    - Add handshake pin support
 
    - Make regulator supply name configurable and allow registering more
      than 1 GPIO regulator
 
    - Map mt9m114 powerdown pin to powerenable
 
  - intel/pmc: Add separate SSRAM Telemetry driver
 
  - intel-uncore-freq: Add attributes to show agent types and die ID
 
  - ISST:
 
    - Support SST-TF revision 2 (allows more cores per bucket)
 
    - Support SST-PP revision 2 (fabric 1 frequencies)
 
    - Remove unnecessary SST MSRs restore (the package retains MSRs
      despite CPU offlining)
 
  - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
 
  - mellanox: mlxbf-pmc: Support additional PMC blocks
 
  - oxpec:
 
    - Add OneXFly variants
 
    - Add support for charge limit, charge thresholds, and turbo LED
 
    - Distinguish current X1 variants to avoid unwanted matching to new
      variants
 
    - Follow hwmon conventions
 
    - Move from hwmon/oxp-sensors to platform/x86 to match the enlarged
      scope
 
  - power: supply:
 
    - Add inhibit-charge-awake (needed by oxpec)
 
    - Add additional battery health status values ("blown fuse" and "cell
      imbalance") (needed by dell-ddv)
 
  - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
 
  - thinkpad-acpi: Support camera shutter switch hotkey
 
  - tuxedo: Add virtual LampArray for TUXEDO NB04 devices
 
  - tools/power/x86/intel-speed-select:
 
    - Support displaying SST-PP revision 2 fields
 
    - Skip uncore frequency update on newer generations of CPUs
 
  - Miscellaneous cleanups / refactoring / improvements
 
 The following is an automated shortlog grouped by driver:
 
 ABI: testing: sysfs-class-oxp:
  -  add missing documentation
  -  add tt_led attribute documentation
 
 Add AMD ISP platform config for OV05C10:
  - Add AMD ISP platform config for OV05C10
 
 alienware-wmi-wmax:
  -  Add a DebugFS interface
  -  Add HWMON support
  -  Add support for manual fan control
  -  Add support for the "custom" thermal profile
  -  Expose GPIO debug methods
  -  Fix awcc_hwmon_fans_init() label logic
  -  Fix uninitialized bitmap in awcc_hwmon_fans_init()
  -  Improve ID processing
  -  Improve internal AWCC API
  -  Improve platform profile probe
  -  Modify supported_thermal_profiles[]
  -  Rename thermal related symbols
 
 amd/hsmp: acpi:
  -  Add sysfs files to display HSMP telemetry
 
 amd/hsmp:
  -  fix building with CONFIG_HWMON=m
  -  Report power via hwmon sensors
  -  Use a single DRIVER_VERSION for all hsmp modules
 
 arm64: huawei-gaokun-ec:
  -  Remove unneeded semicolon
 
 asus-wmi:
  -  fix build without CONFIG_SUSPEND
  -  Refactor Ally suspend/resume
 
 Avoid -Wflex-array-member-not-at-end warning:
  - Avoid -Wflex-array-member-not-at-end warning
 
 barco-p50:
  -  use new GPIO line value setter callbacks
 
 dell-ddv:
  -  Expose the battery health to userspace
  -  Expose the battery manufacture date to userspace
  -  Implement the battery matching algorithm
 
 dell-pc:
  -  Propagate errors when detecting feature support
  -  Transition to faux device
  -  Use non-atomic bitmap operations
 
 docs: ABI:
  -  Fix "aassociated" to "associated"
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
 
 Documentation: ABI:
  -  Add sysfs platform and debugfs ABI documentation for alienware-wmi
 
 Documentation: admin-guide: laptops:
  -  Add documentation for alienware-wmi
 
 Documentation: admin-guide: pm:
  -  Add documentation for agent_types
  -  Add documentation for die_id
 
 Documentation: wmi: alienware-wmi:
  -  Add GPIO control documentation
 
 Documentation: wmi:
  -  Improve and update alienware-wmi documentation
 
 Do not enable by default during compile testing:
  - Do not enable by default during compile testing
 
 hid-asus:
  -  check ROG Ally MCU version and warn
 
 hwmon:
  -  (oxp-sensors) Add all OneXFly variants
  -  (oxp-sensors) Distinguish the X1 variants
 
 int0002:
  -  use new GPIO line value setter callbacks
 
 int3472:
  -  Add handshake pin support
  -  Add skl_int3472_register_clock() helper
  -  Avoid GPIO regulator spikes
  -  Debug log when remapping pins
  -  Drop unused gpio field from struct int3472_gpio_regulator
  -  Export int3472_discrete_parse_crs()
  -  For mt9m114 sensors map powerdown to powerenable
  -  Make regulator supply name configurable
  -  Move common.h to public includes, symbols to INTEL_INT3472
  -  Prepare for registering more than 1 GPIO regulator
  -  Remove unused sensor_config struct member
  -  Rework AVDD second sensor quirk handling
  -  Stop setting a supply-name for GPIO regulators
  -  Stop using devm_gpiod_get()
 
 intel/pmc:
  -  Convert index variables to be unsigned
  -  Create Intel PMC SSRAM Telemetry driver
  -  Improve pmc_core_get_lpm_req()
  -  Move error handling to init function
  -  Move PMC Core related functions
  -  Move PMC devid to core.h
  -  Remove unneeded header file inclusion
  -  Remove unneeded io operations
  -  Rename core_ssram to ssram_telemetry
  -  Use devm for mutex_init
 
 intel: power-domains:
  -  Add interface to get Linux die ID
 
 intel-uncore-freq:
  -  Add attributes to show agent types
  -  Add attributes to show die_id
 
 intel/vsec:
  -  Change return type of intel_vsec_register
 
 Introduce dasharo-acpi platform driver:
  - Introduce dasharo-acpi platform driver
 
 ISST:
  -  Do Not Restore SST MSRs on CPU Online Operation
  -  Support SST-PP revision 2
  -  Support SST-TF revision 2
  -  Update minor version
 
 mellanox:
  -  Cosmetic changes to improve code style
  -  Introduce support of Nvidia smart switch
  -  Rename field to improve code readability
 
 mlxbf-pmc:
  -  Support additional PMC blocks
 
 mlx-platform:
  -  Add support for new Nvidia system
 
 mlxreg-dpu:
  -  Add initial support for Nvidia DPU
  -  Fix smatch warnings
 
 nvsw-sn2200:
  -  Add support for new system flavour
  -  Fix .items in nvsw_sn2201_busbar_hotplug
 
 oxpec:
  -  Add a lower bounds check in oxp_psy_ext_set_prop()
  -  Add charge threshold and behaviour to OneXPlayer
  -  Add support for the OneXPlayer G1
  -  Add turbo led support to X1 devices
  -  Adhere to sysfs-class-hwmon and enable pwm on 2
  -  Convert defines to using tabs
  -  Follow reverse xmas convention for tt_toggle
  -  Make turbo val apply a bitmask
  -  Move fan speed read to separate function
  -  Move hwmon/oxp-sensors to platform/x86
  -  Move pwm_enable read to its own function
  -  Move pwm value read/write to separate functions
  -  Rename ec group to tt_toggle
  -  Rename rval to ret in tt_toggle
 
 portwell-ec:
  -  Add GPIO and WDT driver for Portwell EC
 
 power: supply:
  -  add inhibit-charge-awake to charge_behaviour
 
 power: supply: core:
  -  Add additional health status values
 
 silicom:
  -  use new GPIO line value setter callbacks
 
 sony-laptop:
  -  Remove unused sony laptop camera code
 
 thermal/drivers/acerhdf:
  -  Constify struct thermal_zone_device_ops
 
 thinkpad-acpi:
  -  Add support for new hotkey for camera shutter switch
 
 tools/power/x86/intel-speed-select:
  -  Skip uncore frequency update
  -  Support SST PP revision 2 fields
  -  v1.23 release
 
 tuxedo:
  -  Add virtual LampArray for TUXEDO NB04 devices
  -  Prevent invalid Kconfig state
 
 Use strscpy()/scnprintf() with acpi_device_name/class():
  - Use strscpy()/scnprintf() with acpi_device_name/class()
 
 Merges:
  -  Merge branch 'fixes' into for-next
  -  Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaDWJ7wAKCRBZrE9hU+XO
 MT8JAQDWW6qBoXuqpd6Yx1oOyROc6gJMQAsS9sNc7I60mGooEAEAnTLhOHDGkKb5
 av1fz/SmXGl7joeRYkZV9FRzJ/26AAk=
 =ytxa
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers updates from Ilpo Järvinen:
 "The changes are mostly business as usual. Besides pdx86 changes, there
  are a few power supply changes needed for related pdx86 features, move
  of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
  warning to hid-asus.

  Highlights:

   - alienware-wmi-wmax:
       - Add HWMON support
       - Add ABI and admin-guide documentation
       - Expose GPIO debug methods through debug FS
       - Support manual fan control and "custom" thermal profile

   - amd/hsmp:
       - Add sysfs files to show HSMP telemetry
       - Report power readings and limits via hwmon

   - amd/isp4: Add AMD ISP platform config for OV05C10

   - asus-wmi:
       - Refactor Ally suspend/resume to work better with older FW
       - hid-asus: check ROG Ally MCU version and warn about old FW versions

   - dasharo-acpi:
       - Add driver for Dasharo devices supporting fans and temperatures
         monitoring

   - dell-ddv:
       - Expose the battery health and manufacture date to userspace
         using power supply extensions
       - Implement the battery matching algorithm

   - dell-pc:
       - Improve error propagation
       - Use faux device

   - int3472:
       - Add delays to avoid GPIO regulator spikes
       - Add handshake pin support
       - Make regulator supply name configurable and allow registering
         more than 1 GPIO regulator
       - Map mt9m114 powerdown pin to powerenable

   - intel/pmc: Add separate SSRAM Telemetry driver

   - intel-uncore-freq: Add attributes to show agent types and die ID

   - ISST:
       - Support SST-TF revision 2 (allows more cores per bucket)
       - Support SST-PP revision 2 (fabric 1 frequencies)
       - Remove unnecessary SST MSRs restore (the package retains MSRs
         despite CPU offlining)

   - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640

   - mellanox: mlxbf-pmc: Support additional PMC blocks

   - oxpec:
       - Add OneXFly variants
       - Add support for charge limit, charge thresholds, and turbo LED
       - Distinguish current X1 variants to avoid unwanted matching to
         new variants
       - Follow hwmon conventions
       - Move from hwmon/oxp-sensors to platform/x86 to match the
         enlarged scope

   - power supply:
       - Add inhibit-charge-awake (needed by oxpec)
       - Add additional battery health status values ("blown fuse" and
         "cell imbalance") (needed by dell-ddv)

   - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog

   - thinkpad-acpi: Support camera shutter switch hotkey

   - tuxedo: Add virtual LampArray for TUXEDO NB04 devices

   - tools/power/x86/intel-speed-select:
       - Support displaying SST-PP revision 2 fields
       - Skip uncore frequency update on newer generations of CPUs

   - Miscellaneous cleanups / refactoring / improvements"

* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
  thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
  platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
  platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
  docs: ABI: Fix "aassociated" to "associated"
  platform/x86: Add AMD ISP platform config for OV05C10
  Documentation: admin-guide: pm: Add documentation for die_id
  platform/x86/intel-uncore-freq: Add attributes to show die_id
  platform/x86/intel: power-domains: Add interface to get Linux die ID
  Documentation: admin-guide: pm: Add documentation for agent_types
  platform/x86/intel-uncore-freq: Add attributes to show agent types
  platform/x86/tuxedo: Prevent invalid Kconfig state
  platform/x86: dell-ddv: Expose the battery health to userspace
  platform/x86: dell-ddv: Expose the battery manufacture date to userspace
  platform/x86: dell-ddv: Implement the battery matching algorithm
  power: supply: core: Add additional health status values
  platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
  platform/x86/amd/hsmp: Report power via hwmon sensors
  platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
  platform/mellanox: mlxreg-dpu: Fix smatch warnings
  platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
  ...
 2025-05-29 10:19:22 -07:00
Linus Torvalds
12e9b9e522 ipe/stable-6.16 PR 20250527 
-----BEGIN PGP SIGNATURE-----
 
 iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCaDZldREcd3VmYW5Aa2Vy
 bmVsLm9yZwAKCRDyomI6a/yO7eT7AQCSU1qiLEHpKEbxRtPyD9m6OBVRrS9joKEn
 zABAi00GEgD8C11CKWFemqaL6zexg6c0k51y90K1S1SPZ6pY9HwzZAY=
 =c1Gi
 -----END PGP SIGNATURE-----

Merge tag 'ipe-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe

Pull IPE update from Fan Wu:
 "A single commit from Jasjiv Singh, that adds an errno field to IPE
  policy load auditing to log failures with error details, not just
  successes.

  This improves the security audit trail and helps diagnose policy
  deployment issues"

* tag 'ipe-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
  ipe: add errno field to IPE policy load auditing
 2025-05-29 08:01:53 -07:00
Linus Torvalds
1b98f357da Networking changes for 6.16. 
Core
 ----
 
  - Implement the Device Memory TCP transmit path, allowing zero-copy
    data transmission on top of TCP from e.g. GPU memory to the wire.
 
  - Move all the IPv6 routing tables management outside the RTNL scope,
    under its own lock and RCU. The route control path is now 3x times
    faster.
 
  - Convert queue related netlink ops to instance lock, reducing
    again the scope of the RTNL lock. This improves the control plane
    scalability.
 
  - Refactor the software crc32c implementation, removing unneeded
    abstraction layers and improving significantly the related
    micro-benchmarks.
 
  - Optimize the GRO engine for UDP-tunneled traffic, for a 10%
    performance improvement in related stream tests.
 
  - Cover more per-CPU storage with local nested BH locking; this is a
    prep work to remove the current per-CPU lock in local_bh_disable()
    on PREMPT_RT.
 
  - Introduce and use nlmsg_payload helper, combining buffer bounds
    verification with accessing payload carried by netlink messages.
 
 Netfilter
 ---------
 
  - Rewrite the procfs conntrack table implementation, improving
    considerably the dump performance. A lot of user-space tools
    still use this interface.
 
  - Implement support for wildcard netdevice in netdev basechain
    and flowtables.
 
  - Integrate conntrack information into nft trace infrastructure.
 
  - Export set count and backend name to userspace, for better
    introspection.
 
 BPF
 ---
 
  - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
    programs and can be controlled in similar way to traditional qdiscs
    using the "tc qdisc" command.
 
  - Refactor the UDP socket iterator, addressing long standing issues
    WRT duplicate hits or missed sockets.
 
 Protocols
 ---------
 
  - Improve TCP receive buffer auto-tuning and increase the default
    upper bound for the receive buffer; overall this improves the single
    flow maximum thoughput on 200Gbs link by over 60%.
 
  - Add AFS GSSAPI security class to AF_RXRPC; it provides transport
    security for connections to the AFS fileserver and VL server.
 
  - Improve TCP multipath routing, so that the sources address always
    matches the nexthop device.
 
  - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
    and thus preventing DoS caused by passing around problematic FDs.
 
  - Retire DCCP socket. DCCP only receives updates for bugs, and major
    distros disable it by default. Its removal allows for better
    organisation of TCP fields to reduce the number of cache lines hit
    in the fast path.
 
  - Extend TCP drop-reason support to cover PAWS checks.
 
 Driver API
 ----------
 
  - Reorganize PTP ioctl flag support to require an explicit opt-in for
    the drivers, avoiding the problem of drivers not rejecting new
    unsupported flags.
 
  - Converted several device drivers to timestamping APIs.
 
  - Introduce per-PHY ethtool dump helpers, improving the support for
    dump operations targeting PHYs.
 
 Tests and tooling
 -----------------
 
  - Add support for classic netlink in user space C codegen, so that
    ynl-c can now read, create and modify links, routes addresses and
    qdisc layer configuration.
 
  - Add ynl sub-types for binary attributes, allowing ynl-c to output
    known struct instead of raw binary data, clarifying the classic
    netlink output.
 
  - Extend MPTCP selftests to improve the code-coverage.
 
  - Add tests for XDP tail adjustment in AF_XDP.
 
 New hardware / drivers
 ----------------------
 
  - OpenVPN virtual driver: offload OpenVPN data channels processing
    to the kernel-space, increasing the data transfer throughput WRT
    the user-space implementation.
 
  - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
 
  - Broadcom asp-v3.0 ethernet driver.
 
  - AMD Renoir ethernet device.
 
  - ReakTek MT9888 2.5G ethernet PHY driver.
 
  - Aeonsemi 10G C45 PHYs driver.
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - nVidia/Mellanox (mlx5):
      - refactor the stearing table handling to reduce significantly
        the amount of memory used
      - add support for complex matches in H/W flow steering
      - improve flow streeing error handling
      - convert to netdev instance locking
    - Intel (100G, ice, igb, ixgbe, idpf):
      - ice: add switchdev support for LLDP traffic over VF
      - ixgbe: add firmware manipulation and regions devlink support
      - igb: introduce support for frame transmission premption
      - igb: adds persistent NAPI configuration
      - idpf: introduce RDMA support
      - idpf: add initial PTP support
    - Meta (fbnic):
      - extend hardware stats coverage
      - add devlink dev flash support
    - Broadcom (bnxt):
      - add support for RX-side device memory TCP
    - Wangxun (txgbe):
      - implement support for udp tunnel offload
      - complete PTP and SRIOV support for AML 25G/10G devices
 
  - Ethernet NICs embedded and virtual:
    - Google (gve):
      - add device memory TCP TX support
    - Amazon (ena):
      - support persistent per-NAPI config
    - Airoha:
      - add H/W support for L2 traffic offload
      - add per flow stats for flow offloading
    - RealTek (rtl8211): add support for WoL magic packet
    - Synopsys (stmmac):
      - dwmac-socfpga 1000BaseX support
      - add Loongson-2K3000 support
      - introduce support for hardware-accelerated VLAN stripping
    - Broadcom (bcmgenet):
      - expose more H/W stats
    - Freescale (enetc, dpaa2-eth):
      - enetc: add MAC filter, VLAN filter RSS and loopback support
      - dpaa2-eth: convert to H/W timestamping APIs
    - vxlan: convert FDB table to rhashtable, for better scalabilty
    - veth: apply qdisc backpressure on full ring to reduce TX drops
 
  - Ethernet switches:
    - Microchip (kzZ88x3): add ETS scheduler support
 
  - Ethernet PHYs:
    - RealTek (rtl8211):
      - add support for WoL magic packet
      - add support for PHY LEDs
 
  - CAN:
    - Adds RZ/G3E CANFD support to the rcar_canfd driver.
    - Preparatory work for CAN-XL support.
    - Add self-tests framework with support for CAN physical interfaces.
 
  - WiFi:
    - mac80211:
      - scan improvements with multi-link operation (MLO)
    - Qualcomm (ath12k):
      - enable AHB support for IPQ5332
      - add monitor interface support to QCN9274
      - add multi-link operation support to WCN7850
      - add 802.11d scan offload support to WCN7850
      - monitor mode for WCN7850, better 6 GHz regulatory
    - Qualcomm (ath11k):
      - restore hibernation support
    - MediaTek (mt76):
      - WiFi-7 improvements
      - implement support for mt7990
    - Intel (iwlwifi):
      - enhanced multi-link single-radio (EMLSR) support on 5 GHz links
      - rework device configuration
    - RealTek (rtw88):
      - improve throughput for RTL8814AU
    - RealTek (rtw89):
      - add multi-link operation support
      - STA/P2P concurrency improvements
      - support different SAR configs by antenna
 
  - Bluetooth:
    - introduce HCI Driver protocol
    - btintel_pcie: do not generate coredump for diagnostic events
    - btusb: add HCI Drv commands for configuring altsetting
    - btusb: add RTL8851BE device 0x0bda:0xb850
    - btusb: add new VID/PID 13d3/3584 for MT7922
    - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
    - btnxpuart: implement host-wakeup feature
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmg3D64SHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkcIsQAK2eEc+BxQer975wzvtMg6gF9eoex4a+
 rZ7jxfDzDtNvTauoQsrpehDZp0FnySaVGCU36lHGB2OvDnhCpPc5hXzKDWQpOuqQ
 SHrGG3/6FTbdTG/HfHUcbNyrUzIf53SADSObiQ3qg4gyEQ3sCpcOKtVtMcU8rvsY
 /HqMnsJWFaROUMjMtCcnUSgjmeY9kBvha3sTXUqgeRugEOCvZD7z4rpqFIcQqHw7
 e2Fi8dwIXEYNxqPp6MRq2qdyUTewCRruE8ZIMAFuhtfYeMElUZMPlqlMENX3AzTQ
 cr0EgwcFOUxRA7oZRxhoBNBsVXavtSpQr4ZDoWplxP4aQ37n5tc1E9Q72axpB/Og
 FbJRl6GvWYnCd8071BczgmfHlKaTAigPvt2Z4r6JjM5I/Bij/IZ3k+On1OTuOAj/
 EqfFkdZ0a5cfKrwUMP+oSGtSAywkMVUtnIKJlZeRbjSj2432sCfe2jVAlS8ELM43
 3LUgXYrAKtA87g171LlsRu5EEpI5QmqPb+i5LpPlEXe2TJEgPisyfecJ3NafF/2+
 j575lm+TFNm9NTNhGGjDPEvw0djI5wSGGMe9J4gC74eWi6s5t6C4cuUf84TKWdwR
 x+9H0IB7rfFncAwXHJuUUtzd+fPHaYzs5dDGbSgMQOXr1cr1wlubCK8mQ1r/Wt/a
 3GjFIOQKW2Q5
 =t/Tz
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core:

   - Implement the Device Memory TCP transmit path, allowing zero-copy
     data transmission on top of TCP from e.g. GPU memory to the wire.

   - Move all the IPv6 routing tables management outside the RTNL scope,
     under its own lock and RCU. The route control path is now 3x times
     faster.

   - Convert queue related netlink ops to instance lock, reducing again
     the scope of the RTNL lock. This improves the control plane
     scalability.

   - Refactor the software crc32c implementation, removing unneeded
     abstraction layers and improving significantly the related
     micro-benchmarks.

   - Optimize the GRO engine for UDP-tunneled traffic, for a 10%
     performance improvement in related stream tests.

   - Cover more per-CPU storage with local nested BH locking; this is a
     prep work to remove the current per-CPU lock in local_bh_disable()
     on PREMPT_RT.

   - Introduce and use nlmsg_payload helper, combining buffer bounds
     verification with accessing payload carried by netlink messages.

  Netfilter:

   - Rewrite the procfs conntrack table implementation, improving
     considerably the dump performance. A lot of user-space tools still
     use this interface.

   - Implement support for wildcard netdevice in netdev basechain and
     flowtables.

   - Integrate conntrack information into nft trace infrastructure.

   - Export set count and backend name to userspace, for better
     introspection.

  BPF:

   - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
     programs and can be controlled in similar way to traditional qdiscs
     using the "tc qdisc" command.

   - Refactor the UDP socket iterator, addressing long standing issues
     WRT duplicate hits or missed sockets.

  Protocols:

   - Improve TCP receive buffer auto-tuning and increase the default
     upper bound for the receive buffer; overall this improves the
     single flow maximum thoughput on 200Gbs link by over 60%.

   - Add AFS GSSAPI security class to AF_RXRPC; it provides transport
     security for connections to the AFS fileserver and VL server.

   - Improve TCP multipath routing, so that the sources address always
     matches the nexthop device.

   - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
     and thus preventing DoS caused by passing around problematic FDs.

   - Retire DCCP socket. DCCP only receives updates for bugs, and major
     distros disable it by default. Its removal allows for better
     organisation of TCP fields to reduce the number of cache lines hit
     in the fast path.

   - Extend TCP drop-reason support to cover PAWS checks.

  Driver API:

   - Reorganize PTP ioctl flag support to require an explicit opt-in for
     the drivers, avoiding the problem of drivers not rejecting new
     unsupported flags.

   - Converted several device drivers to timestamping APIs.

   - Introduce per-PHY ethtool dump helpers, improving the support for
     dump operations targeting PHYs.

  Tests and tooling:

   - Add support for classic netlink in user space C codegen, so that
     ynl-c can now read, create and modify links, routes addresses and
     qdisc layer configuration.

   - Add ynl sub-types for binary attributes, allowing ynl-c to output
     known struct instead of raw binary data, clarifying the classic
     netlink output.

   - Extend MPTCP selftests to improve the code-coverage.

   - Add tests for XDP tail adjustment in AF_XDP.

  New hardware / drivers:

   - OpenVPN virtual driver: offload OpenVPN data channels processing to
     the kernel-space, increasing the data transfer throughput WRT the
     user-space implementation.

   - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.

   - Broadcom asp-v3.0 ethernet driver.

   - AMD Renoir ethernet device.

   - ReakTek MT9888 2.5G ethernet PHY driver.

   - Aeonsemi 10G C45 PHYs driver.

  Drivers:

   - Ethernet high-speed NICs:
       - nVidia/Mellanox (mlx5):
           - refactor the steering table handling to significantly
             reduce the amount of memory used
           - add support for complex matches in H/W flow steering
           - improve flow streeing error handling
           - convert to netdev instance locking
       - Intel (100G, ice, igb, ixgbe, idpf):
           - ice: add switchdev support for LLDP traffic over VF
           - ixgbe: add firmware manipulation and regions devlink support
           - igb: introduce support for frame transmission premption
           - igb: adds persistent NAPI configuration
           - idpf: introduce RDMA support
           - idpf: add initial PTP support
       - Meta (fbnic):
           - extend hardware stats coverage
           - add devlink dev flash support
       - Broadcom (bnxt):
           - add support for RX-side device memory TCP
       - Wangxun (txgbe):
           - implement support for udp tunnel offload
           - complete PTP and SRIOV support for AML 25G/10G devices

   - Ethernet NICs embedded and virtual:
       - Google (gve):
           - add device memory TCP TX support
       - Amazon (ena):
           - support persistent per-NAPI config
       - Airoha:
           - add H/W support for L2 traffic offload
           - add per flow stats for flow offloading
       - RealTek (rtl8211): add support for WoL magic packet
       - Synopsys (stmmac):
           - dwmac-socfpga 1000BaseX support
           - add Loongson-2K3000 support
           - introduce support for hardware-accelerated VLAN stripping
       - Broadcom (bcmgenet):
           - expose more H/W stats
       - Freescale (enetc, dpaa2-eth):
           - enetc: add MAC filter, VLAN filter RSS and loopback support
           - dpaa2-eth: convert to H/W timestamping APIs
       - vxlan: convert FDB table to rhashtable, for better scalabilty
       - veth: apply qdisc backpressure on full ring to reduce TX drops

   - Ethernet switches:
       - Microchip (kzZ88x3): add ETS scheduler support

   - Ethernet PHYs:
       - RealTek (rtl8211):
           - add support for WoL magic packet
           - add support for PHY LEDs

   - CAN:
       - Adds RZ/G3E CANFD support to the rcar_canfd driver.
       - Preparatory work for CAN-XL support.
       - Add self-tests framework with support for CAN physical interfaces.

   - WiFi:
       - mac80211:
           - scan improvements with multi-link operation (MLO)
       - Qualcomm (ath12k):
           - enable AHB support for IPQ5332
           - add monitor interface support to QCN9274
           - add multi-link operation support to WCN7850
           - add 802.11d scan offload support to WCN7850
           - monitor mode for WCN7850, better 6 GHz regulatory
       - Qualcomm (ath11k):
           - restore hibernation support
       - MediaTek (mt76):
           - WiFi-7 improvements
           - implement support for mt7990
       - Intel (iwlwifi):
           - enhanced multi-link single-radio (EMLSR) support on 5 GHz links
           - rework device configuration
       - RealTek (rtw88):
           - improve throughput for RTL8814AU
       - RealTek (rtw89):
           - add multi-link operation support
           - STA/P2P concurrency improvements
           - support different SAR configs by antenna

   - Bluetooth:
       - introduce HCI Driver protocol
       - btintel_pcie: do not generate coredump for diagnostic events
       - btusb: add HCI Drv commands for configuring altsetting
       - btusb: add RTL8851BE device 0x0bda:0xb850
       - btusb: add new VID/PID 13d3/3584 for MT7922
       - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
       - btnxpuart: implement host-wakeup feature"

* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
  selftests/bpf: Fix bpf selftest build warning
  selftests: netfilter: Fix skip of wildcard interface test
  net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
  net: openvswitch: Fix the dead loop of MPLS parse
  calipso: Don't call calipso functions for AF_INET sk.
  selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
  net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
  octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
  octeontx2-pf: QOS: Perform cache sync on send queue teardown
  net: mana: Add support for Multi Vports on Bare metal
  net: devmem: ncdevmem: remove unused variable
  net: devmem: ksft: upgrade rx test to send 1K data
  net: devmem: ksft: add 5 tuple FS support
  net: devmem: ksft: add exit_wait to make rx test pass
  net: devmem: ksft: add ipv4 support
  net: devmem: preserve sockc_err
  page_pool: fix ugly page_pool formatting
  net: devmem: move list_add to net_devmem_bind_dmabuf.
  selftests: netfilter: nft_queue.sh: include file transfer duration in log message
  net: phy: mscc: Fix memory leak when using one step timestamping
  ...
 2025-05-28 15:24:36 -07:00
Linus Torvalds
a61e260381 [GIT PULL for v6.16] media updates 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmg1X0MACgkQCF8+vY7k
 4RX+9A//bExEiDHHgTptAhnPpdUKz4+WoNCasW/FIV41ry/OpjnbIuREio7/mkxk
 03r/EEakycSCL8jrnIN7xHxUu5i53X3um2vzVpLgMfYHdxN1nGktGFFtbXq1uLlp
 An3e1fGR2VpU4aXs66Zy7nkaa4r2epfrKa0+dqsL9Tkix6wmbTYmJ2fxBtIjCupr
 bYm8WuQAvK8SvBuBvegAmr6AaVYF56bOh74B1VuRko6IAksHfrppNCUAFvXiU4NL
 FiqNyq9XaHXQtsS7gCCrjVUeTHpzdjjIZEkV3A+60G4Bc5A2wv17TzpR5GPMuUsQ
 BMHlGc1zex5AvieJLCDf5HityEkwD6+1eHxzuTgKtCM3gJYlJYJGMw8Gr219CVw4
 +jJ6VImkfT/nScg+xsoyiYLHj/I4Awhj2mobnO6UnMyprTHC9AjnHA5eijvdSnRg
 wyAA80ofjRr6n21adwkw5QXDKEE/UZMEbiUmAkL4qIZ1Y1iBVvPzmCLDp9qCpq8+
 lsxsn26pXFAGySzx9WWHEmdYWU6/Z0XkifRgYhOR6tcUoGDar2iLJlzn9AEm8hPS
 mU72eQOOdELVzr1rDYkGI0rskkYelmmJbWIQCkUEXhm4BhWn5EGK56stckmIcW0a
 X9e+GQDR5trjl8hAgLD/I80CI3bRKK9ox2VQdsRWKoho8NmkgyI=
 =4pGJ
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output

 - New driver: Amlogic C3 ISP

 - New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10

 - amlogic: c3-mipi-csi2: Handle 64-bits division

 - a fix for 64-bits division at the amlogic c3-mipi-csi2 driver

 - Changes at atomisp to support mainline mt9m114 driver and remove
   deprecated GPIO APIs

 - various cleanups, fixes and enhancements

* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
  media: rkvdec: h264: Support High 10 and 4:2:2 profiles
  media: rkvdec: Add get_image_fmt ops
  media: rkvdec: Initialize the m2m context before the controls
  media: rkvdec: h264: Limit minimum profile to constrained baseline
  media: mediatek: jpeg: support 34bits
  media: verisilicon: Free post processor buffers on error
  media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
  media: amlogic: c3-mipi-csi2: Handle 64-bits division
  media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
  media: uvcvideo: Fix deferred probing error
  media: uvcvideo: Rollback non processed entities on error
  media: uvcvideo: Send control events for partial succeeds
  media: uvcvideo: Return the number of processed controls
  media: uvcvideo: Do not turn on the camera for some ioctls
  media: uvcvideo: Make power management granular
  media: uvcvideo: Increase/decrease the PM counter per IOCTL
  media: uvcvideo: Create uvc_pm_(get|put) functions
  media: uvcvideo: Keep streaming state in the file handle
  Documentation: media: Add documentation file c3-isp.rst
  Documentation: media: Add documentation file metafmt-c3-isp.rst
  ...
 2025-05-28 09:17:20 -07:00
Linus Torvalds
3b66e6b3c0 cgroup: Changes for v6.16 
- cgroup rstat shared the tracking tree across all controlers with the
   rationale being that a cgroup which is using one resource is likely to be
   using other resources at the same time (ie. if something is allocating
   memory, it's probably consuming CPU cycles). However, this turned out to
   not scale very well especially with memcg using rstat for internal
   operations which made memcg stat read and flush patterns substantially
   different from other controllers. JP Kobryn split the rstat tree per
   controller.
 
 - cgroup BPF support was hooking into cgroup init/exit paths directly.
   Convert them to use a notifier chain instead so that other usages can be
   added easily. The two of the patches which implement this are mislabeled
   as belonging to sched_ext instead of cgroup. Sorry.
 
 - Relatively minor cpuset updates.
 
 - Documentation updates.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaDYUmA4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGRhbAP90v8QwUkWEKGQSam8JY3by7PvrW6pV5ot+BGuM
 4xu3BAEAjsJ9FdiwYLwKYqG7y59xhhBFOo6GpcP52kPp3znl+QQ=
 =6MIT
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:

 - cgroup rstat shared the tracking tree across all controllers with the
   rationale being that a cgroup which is using one resource is likely
   to be using other resources at the same time (ie. if something is
   allocating memory, it's probably consuming CPU cycles).

   However, this turned out to not scale very well especially with memcg
   using rstat for internal operations which made memcg stat read and
   flush patterns substantially different from other controllers. JP
   Kobryn split the rstat tree per controller.

 - cgroup BPF support was hooking into cgroup init/exit paths directly.

   Convert them to use a notifier chain instead so that other usages can
   be added easily. The two of the patches which implement this are
   mislabeled as belonging to sched_ext instead of cgroup. Sorry.

 - Relatively minor cpuset updates

 - Documentation updates

* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
  sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
  sched_ext: Introduce cgroup_lifetime_notifier
  cgroup: Minor reorganization of cgroup_create()
  cgroup, docs: cpu controller's interaction with various scheduling policies
  cgroup, docs: convert space indentation to tab indentation
  cgroup: avoid per-cpu allocation of size zero rstat cpu locks
  cgroup, docs: be specific about bandwidth control of rt processes
  cgroup: document the rstat per-cpu initialization
  cgroup: helper for checking rstat participation of css
  cgroup: use subsystem-specific rstat locks to avoid contention
  cgroup: use separate rstat trees for each subsystem
  cgroup: compare css to cgroup::self in helper for distingushing css
  cgroup: warn on rstat usage by early init subsystems
  cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
  cgroup/rstat: Improve cgroup_rstat_push_children() documentation
  cgroup: fix goto ordering in cgroup_init()
  cgroup: fix pointer check in css_rstat_init()
  cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
  cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
  cgroup/cpuset: Always use cpu_active_mask
  ...
 2025-05-27 20:59:53 -07:00
Jasjiv Singh
1d887d6f81 ipe: add errno field to IPE policy load auditing 
Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE.

This patch introduces a new error field to the AUDIT_IPE_POLICY_LOAD event
to log policy loading failures. Currently, IPE only logs successful policy
loads, but not failures. Tracking failures is crucial to detect malicious
attempts and ensure a complete audit trail for security events.

The new error field will capture the following error codes:

* -ENOKEY: Key used to sign the IPE policy not found in the keyring
* -ESTALE: Attempting to update an IPE policy with an older version
* -EKEYREJECTED: IPE signature verification failed
* -ENOENT: Policy was deleted while updating
* -EEXIST: Same name policy already deployed
* -ERANGE: Policy version number overflow
* -EINVAL: Policy version parsing error
* -EPERM: Insufficient permission
* -ENOMEM: Out of memory (OOM)
* -EBADMSG: Policy is invalid

Here are some examples of the updated audit record types:

AUDIT_IPE_POLICY_LOAD(1422):
audit:  AUDIT1422 policy_name="Test_Policy" policy_version=0.0.1
policy_digest=sha256:84EFBA8FA71E62AE0A537FAB962F8A2BD1053964C4299DCA
92BFFF4DB82E86D3 auid=1000 ses=3 lsm=ipe res=1 errno=0

The above record shows a new policy has been successfully loaded into
the kernel with the policy name, version, and hash with the errno=0.

AUDIT_IPE_POLICY_LOAD(1422) with error:

audit: AUDIT1422 policy_name=? policy_version=? policy_digest=?
auid=1000 ses=3 lsm=ipe res=0 errno=-74

The above record shows a policy load failure due to an invalid policy
(-EBADMSG).

By adding this error field, we ensure that all policy load attempts,
whether successful or failed, are logged, providing a comprehensive
audit trail for IPE policy management.

Signed-off-by: Jasjiv Singh <jasjivsingh@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
 2025-05-27 18:08:51 -07:00
Linus Torvalds
c89756bcf4 Power management updates for 6.16-rc1 
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
    Tian).
 
  - Fix typos in energy model documentation and example driver code (Moon
    Hee Lee, Atul Kumar Pant).
 
  - Rearrange the energy model management code and add a new function for
    adjusting a CPU energy model after adjusting the capacity of the
    given CPU to it (Rafael Wysocki).
 
  - Refactor cpufreq_online(), add and use cpufreq policy locking guards,
    use __free() in policy reference counting, and clean up core cpufreq
    code on top of that (Rafael Wysocki).
 
  - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
    Kumar).
 
  - Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
    Ugwekar).
 
  - Add offline, online and suspend callbacks to the amd-pstate driver,
    rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
    Ugwekar).
 
  - Add support for the "Requested CPU Min frequency" BIOS option to the
    amd-pstate driver (Dhananjay Ugwekar).
 
  - Reset amd-pstate driver mode after running selftests (Swapnil
    Sapkal).
 
  - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
    Chancellor).
 
  - Add helper for governor checks to the schedutil cpufreq governor and
    move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
 
  - Populate the cpu_capacity sysfs entries from the intel_pstate driver
    after registering asym capacity support (Ricardo Neri).
 
  - Add support for enabling Energy-aware scheduling (EAS) to the
    intel_pstate driver when operating in the passive mode on a hybrid
    platform (Rafael Wysocki).
 
  - Drop redundant cpus_read_lock() from store_local_boost() in the
    cpufreq core (Seyediman Seyedarab).
 
  - Replace sscanf() with kstrtouint() in the cpufreq code and use a
    symbol instead of a raw number in it (Bowen Yu).
 
  - Add support for autonomous CPU performance state selection to the
    CPPC cpufreq driver (Lifeng Zheng).
 
  - OPP: Add dev_pm_opp_set_level() (Praveen Talari).
 
  - Introduce scope-based cleanup headers and mutex locking guards in OPP
    core (Viresh Kumar).
 
  - Switch OPP to use kmemdup_array() (Zhang Enpei).
 
  - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
    menu cpuidle governor (Zhongqiu Han).
 
  - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
 
  - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
    Bityutskiy).
 
  - Fix typos in two comments in the teo cpuidle governor (Atul Kumar
    Pant).
 
  - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
    Kalla).
 
  - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
 
  - Add new devm_ functions for enabling runtime PM and runtime PM
    reference counting (Bence Csókás).
 
  - Remove size arguments from strscpy() calls in the hibernation core
    code (Thorsten Blum).
 
  - Adjust the handling of devices with asynchronous suspend enabled
    during system suspend and resume to start resuming them immediately
    after resuming their parents and to start suspending such a device
    immediately after suspending its first child (Rafael Wysocki).
 
  - Adjust messages printed during tasks freezing to avoid using
    pr_cont() (Andrew Sayers, Paul Menzel).
 
  - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
    Zhang).
 
  - Add missing wakeup source attribute relax_count to sysfs and
    remove the space character at the end ofi the string produced by
    pm_show_wakelocks() (Zijun Hu).
 
  - Add configurable pm_test delay for hibernation (Zihuan Zhang).
 
  - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
    cypd4226 device on Tegra boards from suspending prematurely (Jon
    Hunter).
 
  - Unbreak printing PM debug messages during hibernation and clean up
    some related code (Rafael Wysocki).
 
  - Add a systemd service to run cpupower and change cpupower binding's
    Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli).
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5
 c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1
 fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj
 RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe
 MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv
 VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF
 MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4=
 =dIqJ
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "Once again, the changes are dominated by cpufreq updates, but this
  time the majority of them are cpufreq core changes, mostly related to
  the introduction of policy locking guards and __free() usage, and
  fixes related to boost handling.

  Still, there is also a significant update of the intel_pstate driver
  making it register an energy model when running on a hybrid platform
  which is used for enabling energy-aware scheduling (EAS) if the driver
  operates in the passive mode (and schedutil is used as the cpufreq
  governor for all CPUs which is the passive mode default).

  There are some amd-pstate driver updates too, for a good measure,
  including the "Requested CPU Min frequency" BIOS option support and
  new online/offline callbacks.

  In the cpuidle space, the most significant change is the addition of a
  C1 demotion on/off sysfs knob to intel_idle which should help some
  users to configure their systems more precisely. There is also the
  conversion of the PSCI cpuidle driver to a faux device one and there
  are two small updates of cpuidle governors.

  Device power management is also modified quite a bit, especially the
  handling of devices with asynchronous suspend and resume enabled
  during system transitions. They are now going to be handled more
  asynchronously during suspend transitions and somewhat less
  aggressively during resume transitions.

  Apart from the above, the operating performance points (OPP) library
  is now going to use mutex locking guards and scope-based cleanup
  helpers and there is the usual bunch of assorted fixes and code
  cleanups.

  Specifics:

   - Fix potential division-by-zero error in em_compute_costs() (Yaxiong
     Tian)

   - Fix typos in energy model documentation and example driver code
     (Moon Hee Lee, Atul Kumar Pant)

   - Rearrange the energy model management code and add a new function
     for adjusting a CPU energy model after adjusting the capacity of
     the given CPU to it (Rafael Wysocki)

   - Refactor cpufreq_online(), add and use cpufreq policy locking
     guards, use __free() in policy reference counting, and clean up
     core cpufreq code on top of that (Rafael Wysocki)

   - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
     Kumar)

   - Fix des_perf clamping with max_perf in amd_pstate_update()
     (Dhananjay Ugwekar)

   - Add offline, online and suspend callbacks to the amd-pstate driver,
     rename and use the existing amd_pstate_epp callbacks in it
     (Dhananjay Ugwekar)

   - Add support for the "Requested CPU Min frequency" BIOS option to
     the amd-pstate driver (Dhananjay Ugwekar)

   - Reset amd-pstate driver mode after running selftests (Swapnil
     Sapkal)

   - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
     Chancellor)

   - Add helper for governor checks to the schedutil cpufreq governor
     and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)

   - Populate the cpu_capacity sysfs entries from the intel_pstate
     driver after registering asym capacity support (Ricardo Neri)

   - Add support for enabling Energy-aware scheduling (EAS) to the
     intel_pstate driver when operating in the passive mode on a hybrid
     platform (Rafael Wysocki)

   - Drop redundant cpus_read_lock() from store_local_boost() in the
     cpufreq core (Seyediman Seyedarab)

   - Replace sscanf() with kstrtouint() in the cpufreq code and use a
     symbol instead of a raw number in it (Bowen Yu)

   - Add support for autonomous CPU performance state selection to the
     CPPC cpufreq driver (Lifeng Zheng)

   - OPP: Add dev_pm_opp_set_level() (Praveen Talari)

   - Introduce scope-based cleanup headers and mutex locking guards in
     OPP core (Viresh Kumar)

   - Switch OPP to use kmemdup_array() (Zhang Enpei)

   - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
     the menu cpuidle governor (Zhongqiu Han)

   - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)

   - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
     Bityutskiy)

   - Fix typos in two comments in the teo cpuidle governor (Atul Kumar
     Pant)

   - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
     Kalla)

   - Move debug runtime PM attributes to runtime_attrs[] (Rafael
     Wysocki)

   - Add new devm_ functions for enabling runtime PM and runtime PM
     reference counting (Bence Csókás)

   - Remove size arguments from strscpy() calls in the hibernation core
     code (Thorsten Blum)

   - Adjust the handling of devices with asynchronous suspend enabled
     during system suspend and resume to start resuming them immediately
     after resuming their parents and to start suspending such a device
     immediately after suspending its first child (Rafael Wysocki)

   - Adjust messages printed during tasks freezing to avoid using
     pr_cont() (Andrew Sayers, Paul Menzel)

   - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
     Zhang)

   - Add missing wakeup source attribute relax_count to sysfs and remove
     the space character at the end ofi the string produced by
     pm_show_wakelocks() (Zijun Hu)

   - Add configurable pm_test delay for hibernation (Zihuan Zhang)

   - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
     cypd4226 device on Tegra boards from suspending prematurely (Jon
     Hunter)

   - Unbreak printing PM debug messages during hibernation and clean up
     some related code (Rafael Wysocki)

   - Add a systemd service to run cpupower and change cpupower binding's
     Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"

* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: CPPC: Add support for autonomous selection
  cpufreq: Update sscanf() to kstrtouint()
  cpufreq: Replace magic number
  OPP: switch to use kmemdup_array()
  PM: freezer: Rewrite restarting tasks log to remove stray *done.*
  PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
  cpufreq: drop redundant cpus_read_lock() from store_local_boost()
  cpupower: do not install files to /etc/default/
  cpupower: do not call systemctl at install time
  cpupower: do not write DESTDIR to cpupower.service
  PM: sleep: Introduce pm_sleep_transition_in_progress()
  cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
  cpufreq: intel_pstate: Document hybrid processor support
  cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
  cpufreq: intel_pstate: EAS support for hybrid platforms
  PM: EM: Introduce em_adjust_cpu_capacity()
  PM: EM: Move CPU capacity check to em_adjust_new_capacity()
  PM: EM: Documentation: Fix typos in example driver code
  cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
  PM: sleep: Introduce pm_suspend_in_progress()
  ...
 2025-05-27 16:48:47 -07:00
Linus Torvalds
aacc73ceeb gpio updates for v6.16-rc1 
GPIO core:
 - use more lock guards where applicable
 - refactor GPIO ACPI code and shrink it in the process by 8%
 - move GPIO ACPI quirks into a separate file
 - remove unneeded #ifdef
 - convert GPIO devres helpers to using devm_add_action() where applicable
   which shrinks and simplifies the code
 - refactor GPIO descriptor validation in GPIO consumer interfaces
 - don't allow setting values on input lines in the GPIO core which will
   take off the burden from GPIO drivers of checking this down the line
 - provide gpiod_is_equal() as a way of safely comparing two GPIO
   descriptors (the only current user is in regulator core)
 
 New drivers:
 - add the GPIO module for the max77759 multifunction device
 - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
 - add the GPIO driver for the Spacemit K1 SoC
 
 Driver improvements:
 - convert more drivers to using the new GPIO line value setter callbacks
 - convert more drivers to making the irq_chip immutable as is recommended
   by the interrupt subsystem
 - extend build testing coverage by enabling more modules to be built with
   COMPILE_TEST=y
 - extend the gpio-aggregator module with a configfs interface that makes
   the setup easier for user-space than the existing driver-level sysfs
   attributes and also adds more advanced configuration features (such as
   referring to aggregated lines by their original names or modifying
   their names as exposed by the aggregated chip)
 - add a missing mutex_destroy() in gpio-imx-scu
 - add an OF polarity quirk for s5m8767
 - allow building gpio-vf610 as a loadable module
 - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
   interface disabled (another small step towards getting rid of the global
   GPIO numberspace)
 - add support for level-triggered interrupts to gpio-pca953x
 - don't double-check the ngpios property in gpio-ds4520 as GPIO core
   already does it
 - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
   already does it
 - remove unused callbacks from gpio-max3191x
 
 DT bindings:
 - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
   drivers added this cycle)
 - document more properties for gpio-vf610 and gpio-tegra186
 - document a new pca95xx variant
 - fix style of examples in several GPIO DT-binding documents
 
 Misc:
 - TODO list updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmg0NtQACgkQEacuoBRx
 13Iolg/+P8fe1hTek+UgdKm/EAQ1Mn3oijNE1Ix15VD8Iqacu+URyB2SJMFcg27n
 S/tsuwogQeQmdgXPfYDJkQmiZEyln/ytWf5W2lNwYhGfGujVa8h1FueB7Wb8Zs7G
 PNMnobyAIGivodJfvikDEyczMuxhkOH04ZOT7UpTSPI47BSGsujX/1vgmRQLid1Z
 3wFDJ0yDhVcuxit/VC+LzFpHIV0MiRzGpvHzYid5jjEaGSiRMpHixf27VJGc0gG1
 IJLkhNkwZ3InisWVGvqdRg/FUNErRYKYQSARb4AjCU+/y1H0SWdB0R6sZDTZpP+e
 YqAc8FW31Lw1L7PWBLRTaVS3KT868tdXDCsArNzfBbb3u/WikO2GY/AXuzveZatp
 pHwyPA0JS9QvxaTXU9yjCpGqdNfjbrmU5OkZxTTe+Nyz84fUfiURiE8g4Rl6riy4
 fNzaywRBmVZlEECWSWGzyNw9ZEYDRPZ1ZHmOA+8FWE+/XKJIsVf8w3x2QIC5b/HO
 hYKH4mar8oiEYJFZqoko3iQURJq+AD9wILCNpws5bSsi//VyyNT0mZV/q5hj7+Xx
 pqeEGDInvycN5fDWWJlkN1lj5dDyHZi4uus05mYI9Ec+eX3XNWRUHXUskbpzdgCs
 XepjP9kFQmMSL7y4z2d7tLd7gFup/uGny7o/KyMsIPDw7qVL5rY=
 =PQqp
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have three new drivers, some refactoring in the GPIO core, lots of
  various changes across many drivers, new configfs interface for the
  virtual gpio-aggregator module and DT-bindings updates.

  The treewide conversion of GPIO drivers to using the new value setter
  callbacks is ongoing with another round of GPIO drivers updated. You
  will also see these commits coming in from other subsystems as with
  the relevant changes merged into mainline last cycle, I've started
  converting GPIO providers located elsewhere than drivers/gpio/.

  GPIO core:
   - use more lock guards where applicable
   - refactor GPIO ACPI code and shrink it in the process by 8%
   - move GPIO ACPI quirks into a separate file
   - remove unneeded #ifdef
   - convert GPIO devres helpers to using devm_add_action() where
     applicable which shrinks and simplifies the code
   - refactor GPIO descriptor validation in GPIO consumer interfaces
   - don't allow setting values on input lines in the GPIO core which
     will take off the burden from GPIO drivers of checking this down
     the line
   - provide gpiod_is_equal() as a way of safely comparing two GPIO
     descriptors (the only current user is in regulator core)

  New drivers:
   - add the GPIO module for the max77759 multifunction device
   - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
   - add the GPIO driver for the Spacemit K1 SoC

  Driver improvements:
   - convert more drivers to using the new GPIO line value setter
     callbacks
   - convert more drivers to making the irq_chip immutable as is
     recommended by the interrupt subsystem
   - extend build testing coverage by enabling more modules to be built
     with COMPILE_TEST=y
   - extend the gpio-aggregator module with a configfs interface that
     makes the setup easier for user-space than the existing
     driver-level sysfs attributes and also adds more advanced
     configuration features (such as referring to aggregated lines by
     their original names or modifying their names as exposed by the
     aggregated chip)
   - add a missing mutex_destroy() in gpio-imx-scu
   - add an OF polarity quirk for s5m8767
   - allow building gpio-vf610 as a loadable module
   - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
     interface disabled (another small step towards getting rid of the
     global GPIO numberspace)
   - add support for level-triggered interrupts to gpio-pca953x
   - don't double-check the ngpios property in gpio-ds4520 as GPIO core
     already does it
   - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
     already does it
   - remove unused callbacks from gpio-max3191x

  DT bindings:
   - add device-tree bindings for max77759, spacemit,k1 and blzp1600
     (new drivers added this cycle)
   - document more properties for gpio-vf610 and gpio-tegra186
   - document a new pca95xx variant
   - fix style of examples in several GPIO DT-binding documents

  Misc:
   - TODO list updates"

* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
  gpio: timberdale: select GPIOLIB_IRQCHIP
  gpio: lpc18xx: select GPIOLIB_IRQCHIP
  gpio: grgpio: select GPIOLIB_IRQCHIP
  gpio: bcm-kona: select GPIOLIB_IRQCHIP
  dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
  gpio: davinci: select GPIOLIB_IRQCHIP
  gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
  gpiolib: acpi: Move quirks to a separate file
  gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
  gpiolib: acpi: Handle deferred list via new API
  gpiolib: acpi: Make sure we fill struct acpi_gpio_info
  gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
  gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
  gpiolib: remove unneeded #ifdef
  gpio: mpc8xxx: select GPIOLIB_IRQCHIP
  gpio: pxa: select GPIOLIB_IRQCHIP
  gpio: pxa: Make irq_chip immutable
  gpio: timberdale: Make irq_chip immutable
  gpio: xgene-sb: Make irq_chip immutable
  gpio: davinci: Make irq_chip immutable
  ...
 2025-05-27 15:22:01 -07:00
Linus Torvalds
3e443d1673 A moderately busy cycle for documentation this time around: 
- The most significant change is the replacement of the old kernel-doc
   script (a monstrous collection of Perl regexes that predates the Git era)
   with a Python reimplementation.  That, too, is a horrifying collection of
   regexes, but in a much cleaner and more maintainable structure that
   integrates far better with the Sphinx build system.
 
   This change has been in linux-next for the full 6.15 cycle; the small
   number of problems that turned up have been addressed, seemingly to
   everybody's satisfaction.  The Perl kernel-doc script remains in tree (as
   scripts/kernel-doc.pl) and can be used with a command-line option if need
   be.  Unless some reason to keep it around materializes, it will probably
   go away in 6.17.
 
   Credit goes to Mauro Carvalho Chehab for doing all this work.
 
 - Some RTLA documentation updates
 
 - A handful of Chinese translations
 
 - The usual collection of typo fixes, general updates, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
 X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
 DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
 X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
 byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
 UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
 =BQ9X
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.16' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A moderately busy cycle for documentation this time around:

   - The most significant change is the replacement of the old
     kernel-doc script (a monstrous collection of Perl regexes that
     predates the Git era) with a Python reimplementation. That, too, is
     a horrifying collection of regexes, but in a much cleaner and more
     maintainable structure that integrates far better with the Sphinx
     build system.

     This change has been in linux-next for the full 6.15 cycle; the
     small number of problems that turned up have been addressed,
     seemingly to everybody's satisfaction. The Perl kernel-doc script
     remains in tree (as scripts/kernel-doc.pl) and can be used with a
     command-line option if need be. Unless some reason to keep it
     around materializes, it will probably go away in 6.17.

     Credit goes to Mauro Carvalho Chehab for doing all this work.

   - Some RTLA documentation updates

   - A handful of Chinese translations

   - The usual collection of typo fixes, general updates, etc"

* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
  Docs: doc-guide: update sphinx.rst Sphinx version number
  docs: doc-guide: clarify latest theme usage
  Documentation/scheduler: Fix typo in sched-stats domain field description
  scripts: kernel-doc: prevent a KeyError when checking output
  docs: kerneldoc.py: simplify exception handling logic
  MAINTAINERS: update linux-doc entry to cover new Python scripts
  docs: align with scripts/syscall.tbl migration
  Documentation: NTB: Fix typo
  Documentation: ioctl-number: Update table intro
  docs: conf.py: drop backward support for old Sphinx versions
  Docs: driver-api/basics: add kobject_event interfaces
  Docs: relay: editing cleanups
  docs: fix "incase" typo in coresight/panic.rst
  Fix spelling error for 'parallel'
  docs: admin-guide: fix typos in reporting-issues.rst
  docs: dmaengine: add explanation for DMA_ASYNC_TX capability
  Documentation: leds: improve readibility of multicolor doc
  docs: fix typo in firmware-related section
  docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
  Documentation: ioctl-number: Update outdated submission info
  ...
 2025-05-27 11:22:19 -07:00
Linus Torvalds
785cdec46e Core x86 updates for v6.16: 
Boot code changes:
 
  - A large series of changes to reorganize the x86 boot code into a better isolated
    and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
    by Ard Biesheuvel.
 
    Motivation & background:
 
 	| Since commit
 	|
 	|    c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
 	|
 	| dated Jun 6 2017, we have been using C code on the boot path in a way
 	| that is not supported by the toolchain, i.e., to execute non-PIC C
 	| code from a mapping of memory that is different from the one provided
 	| to the linker. It should have been obvious at the time that this was a
 	| bad idea, given the need to sprinkle fixup_pointer() calls left and
 	| right to manipulate global variables (including non-pointer variables)
 	| without crashing.
 	|
 	| This C startup code has been expanding, and in particular, the SEV-SNP
 	| startup code has been expanding over the past couple of years, and
 	| grown many of these warts, where the C code needs to use special
 	| annotations or helpers to access global objects.
 
    This tree includes the first phase of this work-in-progress x86 boot code
    reorganization.
 
 Scalability enhancements and micro-optimizations:
 
  - Improve code-patching scalability (Eric Dumazet)
  - Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
 
 CPU features enumeration updates:
 
  - Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
  - Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
  - Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
 
 Memory management changes:
 
  - Allow temporary MMs when IRQs are on (Andy Lutomirski)
  - Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
  - Simplify choose_new_asid() and generate better code (Borislav Petkov)
  - Simplify 32-bit PAE page table handling (Dave Hansen)
  - Always use dynamic memory layout (Kirill A. Shutemov)
  - Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
  - Make 5-level paging support unconditional (Kirill A. Shutemov)
  - Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
  - Predict valid_user_address() returning true (Mateusz Guzik)
  - Consolidate initmem_init() (Mike Rapoport)
 
 FPU support and vector computing:
 
  - Enable Intel APX support (Chang S. Bae)
  - Reorgnize and clean up the xstate code (Chang S. Bae)
  - Make task_struct::thread constant size (Ingo Molnar)
  - Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
    (Kees Cook)
  - Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
  - Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
 
 Microcode loader changes:
 
  - Help users notice when running old Intel microcode (Dave Hansen)
  - AMD: Do not return error when microcode update is not necessary (Annie Li)
  - AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
 
 Code patching (alternatives) changes:
 
  - Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
  - Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
    (Nikolay Borisov)
  - Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
 
 Debugging support:
 
  - Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
  - Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
  - Add AMD Zen debugging document (Mario Limonciello)
  - Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
  - Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
 
 CPU bugs and bug mitigations:
 
  - Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
  - Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
  - Restructure and harmonize the various CPU bug mitigation methods
    (David Kaplan)
  - Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
 
 MSR API:
 
  - Large MSR code and API cleanup (Xin Li)
  - In-kernel MSR API type cleanups and renames (Ingo Molnar)
 
 PKEYS:
 
  - Simplify PKRU update in signal frame (Chang S. Bae)
 
 NMI handling code:
 
  - Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
  - Improve NMI duration console printouts (Sohil Mehta)
 
 Paravirt guests interface:
 
  - Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
 
 SEV support:
 
  - Share the sev_secrets_pa value again (Tom Lendacky)
 
 x86 platform changes:
 
  - Introduce the <asm/amd/> header namespace (Ingo Molnar)
  - i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
    (Mario Limonciello)
 
 Fixes and cleanups:
 
  - x86 assembly code cleanups and fixes (Uros Bizjak)
 
  - Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
    Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
    Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
    Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
    Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
    Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
    Xin Li)
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgy9WARHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jJSw/+OW2zvAx602doujBIE17vFLU7R10Xwj5H
 lVgomkWCoTNscUZPhdT/iI+/kQF1fG8PtN9oZKUsTAUswldKJsqu7KevobviesiW
 qI+FqH/fhHaIk7GVh9VP65Dgrdki8zsgd7BFxD8pLRBlbZTxTxXNNkuNJrs6LxJh
 SxWp/FVtKo6Wd57qlUcsdo0tilAfcuhlEweFUarX55X2ouhdeHjcGNpxj9dHKOh8
 M7R5yMYFrpfdpSms+WaCnKKahWHaIQtQTsPAyKwoVdtfl1kK+7NgaCF55Gbo3ogp
 r59JwC/CGruDa5QnnDizCwFIwpZw9M52Q1NhP/eLEZbDGB4Yya3b5NW+Ya+6rPvO
 ZZC3e1uUmlxW3lrYflUHurnwrVb2GjkQZOdf0gfnly/7LljIicIS2dk4qIQF9NBd
 sQPpW5hjmIz9CsfeL8QaJW38pQyMsQWznFuz4YVuHcLHvleb3hR+n4fNfV5Lx9bw
 oirVETSIT5hy/msAgShPqTqFUEiVCgp16ow20YstxxzFu/FQ+VG987tkeUyFkPMe
 q1v5yF1hty+TkM4naKendIZ/MJnsrv0AxaegFz9YQrKGL1UPiOajQbSyKbzbto7+
 ozmtN0W80E8n4oQq008j8htpgIhDV91UjF5m33qB82uSqKihHPPTsVcbeg5nZwh2
 ti5g/a1jk94=
 =JgQo
 -----END PGP SIGNATURE-----

Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core x86 updates from Ingo Molnar:
 "Boot code changes:

   - A large series of changes to reorganize the x86 boot code into a
     better isolated and easier to maintain base of PIC early startup
     code in arch/x86/boot/startup/, by Ard Biesheuvel.

     Motivation & background:

  	| Since commit
  	|
  	|    c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
  	|
  	| dated Jun 6 2017, we have been using C code on the boot path in a way
  	| that is not supported by the toolchain, i.e., to execute non-PIC C
  	| code from a mapping of memory that is different from the one provided
  	| to the linker. It should have been obvious at the time that this was a
  	| bad idea, given the need to sprinkle fixup_pointer() calls left and
  	| right to manipulate global variables (including non-pointer variables)
  	| without crashing.
  	|
  	| This C startup code has been expanding, and in particular, the SEV-SNP
  	| startup code has been expanding over the past couple of years, and
  	| grown many of these warts, where the C code needs to use special
  	| annotations or helpers to access global objects.

     This tree includes the first phase of this work-in-progress x86
     boot code reorganization.

  Scalability enhancements and micro-optimizations:

   - Improve code-patching scalability (Eric Dumazet)

   - Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)

  CPU features enumeration updates:

   - Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
     Darwish)

   - Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
     Thomas Gleixner)

   - Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)

  Memory management changes:

   - Allow temporary MMs when IRQs are on (Andy Lutomirski)

   - Opt-in to IRQs-off activate_mm() (Andy Lutomirski)

   - Simplify choose_new_asid() and generate better code (Borislav
     Petkov)

   - Simplify 32-bit PAE page table handling (Dave Hansen)

   - Always use dynamic memory layout (Kirill A. Shutemov)

   - Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)

   - Make 5-level paging support unconditional (Kirill A. Shutemov)

   - Stop prefetching current->mm->mmap_lock on page faults (Mateusz
     Guzik)

   - Predict valid_user_address() returning true (Mateusz Guzik)

   - Consolidate initmem_init() (Mike Rapoport)

  FPU support and vector computing:

   - Enable Intel APX support (Chang S. Bae)

   - Reorgnize and clean up the xstate code (Chang S. Bae)

   - Make task_struct::thread constant size (Ingo Molnar)

   - Restore fpu_thread_struct_whitelist() to fix
     CONFIG_HARDENED_USERCOPY=y (Kees Cook)

   - Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
     Nesterov)

   - Always preserve non-user xfeatures/flags in __state_perm (Sean
     Christopherson)

  Microcode loader changes:

   - Help users notice when running old Intel microcode (Dave Hansen)

   - AMD: Do not return error when microcode update is not necessary
     (Annie Li)

   - AMD: Clean the cache if update did not load microcode (Boris
     Ostrovsky)

  Code patching (alternatives) changes:

   - Simplify, reorganize and clean up the x86 text-patching code (Ingo
     Molnar)

   - Make smp_text_poke_batch_process() subsume
     smp_text_poke_batch_finish() (Nikolay Borisov)

   - Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)

  Debugging support:

   - Add early IDT and GDT loading to debug relocate_kernel() bugs
     (David Woodhouse)

   - Print the reason for the last reset on modern AMD CPUs (Yazen
     Ghannam)

   - Add AMD Zen debugging document (Mario Limonciello)

   - Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)

   - Stop decoding i64 instructions in x86-64 mode at opcode (Masami
     Hiramatsu)

  CPU bugs and bug mitigations:

   - Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)

   - Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)

   - Restructure and harmonize the various CPU bug mitigation methods
     (David Kaplan)

   - Fix spectre_v2 mitigation default on Intel (Pawan Gupta)

  MSR API:

   - Large MSR code and API cleanup (Xin Li)

   - In-kernel MSR API type cleanups and renames (Ingo Molnar)

  PKEYS:

   - Simplify PKRU update in signal frame (Chang S. Bae)

  NMI handling code:

   - Clean up, refactor and simplify the NMI handling code (Sohil Mehta)

   - Improve NMI duration console printouts (Sohil Mehta)

  Paravirt guests interface:

   - Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)

  SEV support:

   - Share the sev_secrets_pa value again (Tom Lendacky)

  x86 platform changes:

   - Introduce the <asm/amd/> header namespace (Ingo Molnar)

   - i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
     <asm/amd/fch.h> (Mario Limonciello)

  Fixes and cleanups:

   - x86 assembly code cleanups and fixes (Uros Bizjak)

   - Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
     Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
     Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
     Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
     Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
     Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
     Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"

* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
  x86/bugs: Fix spectre_v2 mitigation default on Intel
  x86/bugs: Restructure ITS mitigation
  x86/xen/msr: Fix uninitialized variable 'err'
  x86/msr: Remove a superfluous inclusion of <asm/asm.h>
  x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
  x86/mm/64: Make 5-level paging support unconditional
  x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
  x86/mm/64: Always use dynamic memory layout
  x86/bugs: Fix indentation due to ITS merge
  x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
  x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
  x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
  x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
  x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
  x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
  x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
  x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
  x86/mm: Fix kernel-doc descriptions of various pgtable methods
  x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
  x86/boot: Defer initialization of VM space related global variables
  ...
 2025-05-26 16:04:17 -07:00
Linus Torvalds
eaed94d1f6 Scheduler updates for v6.16: 
Core & fair scheduler changes:
 
   - Tweak wait_task_inactive() to force dequeue sched_delayed tasks
     (John Stultz)
 
   - Adhere to place_entity() constraints (Peter Zijlstra)
 
   - Allow decaying util_est when util_avg > CPU capacity (Pierre Gondois)
 
   - Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)
 
 Energy management:
 
   - Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)
 
   - cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
     (K Prateek Nayak)
 
   - Align uclamp and util_est and call before freq update (Xuewen Yan)
 
 CPU isolation:
 
   - Make use of more than one housekeeping CPU (Phil Auld)
 
 RT scheduler:
 
   - Fix race in push_rt_task() (Harshit Agarwal)
 
   - Add kernel cmdline option for rt_group_sched (Michal Koutný)
 
 Scheduler topology support:
 
   - Improve topology_span_sane speed (Steve Wahl)
 
 Scheduler debugging:
 
   - Move and extend the sched_process_exit() tracepoint (Andrii Nakryiko)
 
   - Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)
 
   - Fix trace_sched_switch(.prev_state) (Peter Zijlstra)
 
   - Untangle cond_resched() and live-patching (Peter Zijlstra)
 
 Fixes and cleanups:
 
   - Misc fixes and cleanups (K Prateek Nayak, Michal Koutný,
     Peter Zijlstra, Xuewen Yan)
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgy50ARHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jFQQ/+KXl2XDg1V/VVmMG8GmtDlR29V3M3ricy
 D7/2s0D1Y1ErHb+pRMBG31EubT9/bXjUshWIuuf51DciSLBmpELHxY5J+AevRa0L
 /pHFwSvP6H5pDakI/xZ01FlYt7PxZGs+1m1o2615Mbwq6J2bjZTan54CYzrdpLOy
 Nqb3OT4tSqU1+7SV7hVForBpZp9u3CvVBRt/wE6vcHltW/I486bM8OCOd2XrUlnb
 QoIRliGI9KHpqCpbAeKPRSKXpf9tZv/AijZ+0WUu2yY8iwSN4p3RbbbwdCipjVQj
 w5I5oqKI6cylFfl2dEFWXVO+tLBihs06w8KSQrhYmQ9DUu4RGBVM9ORINGDBPejL
 bvoQh1mAkqvIL+oodujdbMDIqLupvOEtVSvwzR7SJn8BJSB00js88ngCWLjo/CcU
 imLbWy9FSBLvOswLBzQthgAJEj+ejCkOIbcvM2lINWhX/zNsMFaaqYcO1wRunGGR
 SavTI1s+ZksCQY6vCwRkwPrOZjyg91TA/q4FK102fHL1IcthH6xubE4yi4lTIUYs
 L56HuGm8e7Shc8M2Y5rAYsVG3GoIHFLXnptOn2HnCRWaAAJYsBaLUlzoBy9MxCfw
 I2YVDCylkQxevosSi2XxXo3tbM6auISU9SelAT/dAz32V1rsjWQojRJXeGYKIbu7
 KBuN/dLItW0=
 =s/ra
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "Core & fair scheduler changes:

   - Tweak wait_task_inactive() to force dequeue sched_delayed tasks
     (John Stultz)

   - Adhere to place_entity() constraints (Peter Zijlstra)

   - Allow decaying util_est when util_avg > CPU capacity (Pierre
     Gondois)

   - Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)

  Energy management:

   - Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)

   - cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings
     change (K Prateek Nayak)

   - Align uclamp and util_est and call before freq update (Xuewen Yan)

  CPU isolation:

   - Make use of more than one housekeeping CPU (Phil Auld)

  RT scheduler:

   - Fix race in push_rt_task() (Harshit Agarwal)

   - Add kernel cmdline option for rt_group_sched (Michal Koutný)

  Scheduler topology support:

   - Improve topology_span_sane speed (Steve Wahl)

  Scheduler debugging:

   - Move and extend the sched_process_exit() tracepoint (Andrii
     Nakryiko)

   - Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)

   - Fix trace_sched_switch(.prev_state) (Peter Zijlstra)

   - Untangle cond_resched() and live-patching (Peter Zijlstra)

  Fixes and cleanups:

   - Misc fixes and cleanups (K Prateek Nayak, Michal Koutný, Peter
     Zijlstra, Xuewen Yan)"

* tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  sched/uclamp: Align uclamp and util_est and call before freq update
  sched/util_est: Simplify condition for util_est_{en,de}queue()
  sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE
  sched,livepatch: Untangle cond_resched() and live-patching
  sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks
  sched/fair: Adhere to place_entity() constraints
  sched/debug: Print the local group's asym_prefer_cpu
  cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
  sched/topology: Introduce sched_update_asym_prefer_cpu()
  sched/fair: Use READ_ONCE() to read sg->asym_prefer_cpu
  sched/isolation: Make use of more than one housekeeping cpu
  sched/rt: Fix race in push_rt_task
  sched: Add annotations to RT_GROUP_SCHED fields
  sched: Add RT_GROUP WARN checks for non-root task_groups
  sched: Do not construct nor expose RT_GROUP_SCHED structures if disabled
  sched: Bypass bandwitdh checks with runtime disabled RT_GROUP_SCHED
  sched: Skip non-root task_groups with disabled RT_GROUP_SCHED
  sched: Add commadline option for RT_GROUP_SCHED toggling
  sched: Always initialize rt_rq's task_group
  sched: Remove unneeed macro wrap
  ...
 2025-05-26 15:19:58 -07:00
Linus Torvalds
07046958f6 RCU pull request for v6.16 
Summary of changes:
 - Removed swake_up_one_online() workaround
 - Reverted an incorrect rcuog wake-up fix from offline softirq
 - Rust RCU Guard methods marked as inline
 - Updated MAINTAINERS with Joel’s and Zqiang's new email address
 - Replaced magic constant in rcu_seq_done_exact() with named constant
 - Added warning mechanism to validate rcu_seq_done_exact()
 - Switched SRCU polling API to use rcu_seq_done_exact()
 - Commented on redundant delta check in rcu_seq_done_exact()
 - Made ->gpwrap tests in rcutorture more frequent
 - Fixed reuse of ARM64 images in rcutorture
 - rcutorture improved to check Kconfig and reader conflict handling
 - Extracted logic from rcu_torture_one_read() for clarity
 - Updated LWN RCU API documentation links
 - Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
 - Added tests for SRCU up/down reader primitives
 - Added comments and delays checks in rcutorture
 - Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
 - Added --do-normal and --do-no-normal to torture.sh
 - Added RCU Rust binding tests to torture.sh
 - Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
 - Replaced kmalloc() with kcalloc() in rcuscale
 - Refined listRCU example code for stale data elimination
 - Fixed hardirq count bug for x86 in cpu_stall_cputime
 - Added safety checks in rcu/nocb for offloaded rdp access
 - Other miscellaneous changes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEcoCIrlGe4gjE06JJqA4nf2o45hAFAmgoF5oACgkQqA4nf2o4
 5hDvVw//TNsJ/g0HTMu02uXMmtFIrgvpTnH7OEGJ+2p/KErrmWYsBJQw41ueLAQL
 Drtq3q9888UFF5LLA43HC88DFmT9uV8V8TmmURH+pZWdmJY1Ekn8UBSBhDPGGpC5
 sGIO2jJKjHN8G7fyJKoPtL9jxKSulHF/XQTIL2pP23jopAIwosoCHVAwGvnGVvBC
 smXfMSu+bd3IifNFroodsqjVXgnNQwWUNboOkz0KfkiiosgZsWWW8DaM3NGjdp+C
 tUHLs1zfC6sgJUjdpokTE3TcNudlMgVlB2Quj5jhh1YvsvedgIJXl4wpR6JVutyN
 F9awKt1AZkyZ+cTp+JpohaWaN9aKfNNG7jZ+rxQ0VcuRh35wmBJtiWNjEtJ38R82
 kTC1RI7MEus+6OZRt92jv5TNSa9t3wHbi5fBjNRiQ8PYq5cibZy7Lyrj2JOK7Zqs
 pgmdUnhQH2Uhf52b+clG5hWO55gEtACY8pin6kNewClcRtz04Jew7gkiYDGka4F4
 EXbuDHSWi25eSb3FzT2BqR72OZcJ0kv747OTp+2yTv2TaBA5p+OD8hvL/WbWC2Ok
 DK1YQ4RgEerTSZ4PbgPtWkNnlf6xjdWBaYNwmo+G/DgfjPoTOy1Jp73Z4b1AqSB5
 IPEQy1d/799QgGTYkbrvRtvWHg8yfOMz3ByZoHg31rafr0AsrXM=
 =6mun
 -----END PGP SIGNATURE-----

Merge tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux

Pull RCU updates from Joel Fernandes:
 - Removed swake_up_one_online() workaround
 - Reverted an incorrect rcuog wake-up fix from offline softirq
 - Rust RCU Guard methods marked as inline
 - Updated MAINTAINERS with Joel’s and Zqiang's new email address
 - Replaced magic constant in rcu_seq_done_exact() with named constant
 - Added warning mechanism to validate rcu_seq_done_exact()
 - Switched SRCU polling API to use rcu_seq_done_exact()
 - Commented on redundant delta check in rcu_seq_done_exact()
 - Made ->gpwrap tests in rcutorture more frequent
 - Fixed reuse of ARM64 images in rcutorture
 - rcutorture improved to check Kconfig and reader conflict handling
 - Extracted logic from rcu_torture_one_read() for clarity
 - Updated LWN RCU API documentation links
 - Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
 - Added tests for SRCU up/down reader primitives
 - Added comments and delays checks in rcutorture
 - Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
 - Added --do-normal and --do-no-normal to torture.sh
 - Added RCU Rust binding tests to torture.sh
 - Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
 - Replaced kmalloc() with kcalloc() in rcuscale
 - Refined listRCU example code for stale data elimination
 - Fixed hardirq count bug for x86 in cpu_stall_cputime
 - Added safety checks in rcu/nocb for offloaded rdp access
 - Other miscellaneous changes

* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
  rcutorture: Fix issue with re-using old images on ARM64
  rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
  rcutorture: Reduce TREE01 CPU overcommit
  torture: Check for "Call trace:" as well as "Call Trace:"
  rcutorture: Perform more frequent testing of ->gpwrap
  torture: Add testing of RCU's Rust bindings to torture.sh
  torture: Add --do-{,no-}normal to torture.sh
  checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
  rcutorture: Comment invocations of tick_dep_set_task()
  rcu/nocb: Add Safe checks for access offloaded rdp
  rcuscale: using kcalloc() to relpace kmalloc()
  doc/RCU/listRCU: refine example code for eliminating stale data
  doc: Update LWN RCU API links in whatisRCU.rst
  Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
  rust: sync: rcu: Mark Guard methods as inline
  rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
  rcu: Remove swake_up_one_online() bandaid
  MAINTAINERS: Update Zqiang's email address
  rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
  srcu: Use rcu_seq_done_exact() for polling API
  ...
 2025-05-26 14:20:50 -07:00
Linus Torvalds
f83fcb87f8 xfs: New code for 6.16 
Signed-off-by: Carlos Maiolino <cem@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaDQXTQAKCRBcsMJ8RxYu
 YwUHAYDYYm9oit6AIr0AgTXBMJ+DHyqaszBy0VT2jQUP+yXxyrQc46QExXKU9YQV
 ffmGRAsBgN7ZdDI8D5qWySyOynB3b1Jn3/0jY82GscFK0k0oX3EtxbN9MdrovbgK
 qyO66BVx7w==
 =pG5y
 -----END PGP SIGNATURE-----

Merge tag 'xfs-merge-6.16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Carlos Maiolino:

 - Atomic writes for XFS

 - Remove experimental warnings for pNFS, scrub and parent pointers

* tag 'xfs-merge-6.16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
  xfs: add inode to zone caching for data placement
  xfs: free the item in xfs_mru_cache_insert on failure
  xfs: remove the EXPERIMENTAL warning for pNFS
  xfs: remove some EXPERIMENTAL warnings
  xfs: Remove deprecated xfs_bufd sysctl parameters
  xfs: stop using set_blocksize
  xfs: allow sysadmins to specify a maximum atomic write limit at mount time
  xfs: update atomic write limits
  xfs: add xfs_calc_atomic_write_unit_max()
  xfs: add xfs_file_dio_write_atomic()
  xfs: commit CoW-based atomic writes atomically
  xfs: add large atomic writes checks in xfs_direct_write_iomap_begin()
  xfs: add xfs_atomic_write_cow_iomap_begin()
  xfs: refine atomic write size check in xfs_file_write_iter()
  xfs: refactor xfs_reflink_end_cow_extent()
  xfs: allow block allocator to take an alignment hint
  xfs: ignore HW which cannot atomic write a single block
  xfs: add helpers to compute transaction reservation for finishing intent items
  xfs: add helpers to compute log item overhead
  xfs: separate out setting buftarg atomic writes limits
  ...
 2025-05-26 12:56:01 -07:00
Rafael J. Wysocki
76524ffd10 Merge branches 'pm-runtime' and 'pm-sleep' 
Merge updates related to system sleep handling and runtime PM for 6.16-rc1:

 - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
   Kalla).

 - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).

 - Add new devm_ functions for enabling runtime PM and runtime PM
   reference counting (Bence Csókás).

 - Remove size arguments from strscpy() calls in the hibernation core
   code (Thorsten Blum).

 - Adjust the handling of devices with asynchronous suspend enabled
   during system suspend and resume to start resuming them immediately
   after resuming their parents and to start suspending such a device
   immediately after suspending its first child (Rafael Wysocki).

 - Adjust messages printed during tasks freezing to avoid using
   pr_cont() (Andrew Sayers, Paul Menzel).

 - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
   Zhang).

 - Add missing wakeup source attribute relax_count to sysfs and
   remove the space character at the end ofi the string produced by
   pm_show_wakelocks() (Zijun Hu).

 - Add configurable pm_test delay for hibernation (Zihuan Zhang).

 - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
   cypd4226 device on Tegra boards from suspending prematurely (Jon
   Hunter).

 - Unbreak printing PM debug messages during hibernation and clean up
   some related code (Rafael Wysocki).

* pm-runtime:
  PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
  PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
  PM: runtime: Add new devm functions

* pm-sleep:
  PM: freezer: Rewrite restarting tasks log to remove stray *done.*
  PM: sleep: Introduce pm_sleep_transition_in_progress()
  PM: sleep: Introduce pm_suspend_in_progress()
  PM: sleep: Print PM debug messages during hibernation
  ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
  PM: hibernate: add configurable delay for pm_test
  PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
  PM: wakeup: Add missing wakeup source attribute relax_count
  PM: sleep: Remove unnecessary !!
  PM: sleep: Use two lines for "Restarting..." / "done" messages
  PM: sleep: Make suspend of devices more asynchronous
  PM: sleep: Suspend async parents after suspending children
  PM: sleep: Resume children after resuming the parent
  PM: hibernate: Remove size arguments when calling strscpy()
 2025-05-26 21:21:58 +02:00
Rafael J. Wysocki
af86d7e88e Merge branch 'pm-cpuidle' 
Merge cpuidle updates for 6.16-rc1:

 - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
   menu cpuidle governor (Zhongqiu Han).

 - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).

 - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
   Bityutskiy).

 - Fix typos in two comments in the teo cpuidle governor (Atul Kumar
   Pant).

* pm-cpuidle:
  cpuidle: psci: Avoid initializing faux device if no DT idle states are present
  Documentation: ABI: testing: document the new cpuidle sysfs file
  Documentation: admin-guide: pm: Document intel_idle C1 demotion
  intel_idle: Add C1 demotion on/off sysfs knob
  cpuidle: psci: Transition to the faux device interface
  cpuidle: menu: Optimize bucket assignment when next_timer_ns equals KTIME_MAX
  cpuidle: teo: Fix typos in two comments
 2025-05-26 21:18:34 +02:00
Linus Torvalds
6f59de9bc0 for-6.16/block-20250523 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmgwnGYQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpq9aD/4iqOts77xhWWLrOJWkkhOcV5rREeyppq8X
 MKYul9S4cc4Uin9Xou9a+nab31QBQEk3nsN3kX9o3yAXvkh6yUm36HD8qYNW/46q
 IUkwRQQJ0COyTnexMZQNTbZPQDIYcenXmQxOcrEJ5jC1Jcz0sOKHsgekL+ab3kCy
 fLnuz2ozvjGDMala/NmE8fN5qSlj4qQABHgbamwlwfo4aWu07cwfqn5G/FCYJgDO
 xUvsnTVclom2g4G+7eSSvGQI1QyAxl5QpviPnj/TEgfFBFnhbCSoBTEY6ecqhlfW
 6u59MF/Uw8E+weiuGY4L87kDtBhjQs3UMSLxCuwH7MxXb25ff7qB4AIkcFD0kKFH
 3V5NtwqlU7aQT0xOjGxaHhfPwjLD+FVss4ARmuHS09/Kn8egOW9yROPyetnuH84R
 Oz0Ctnt1IPLFjvGeg3+rt9fjjS9jWOXLITb9Q6nX9gnCt7orCwIYke8YCpmnJyhn
 i+fV4CWYIQBBRKxIT0E/GhJxZOmL0JKpomnbpP2dH8npemnsTCuvtfdrK9gfhH2X
 chBVqCPY8MNU5zKfzdEiavPqcm9392lMzOoOXW2pSC1eAKqnAQ86ZT3r7rLntqE8
 75LxHcvaQIsnpyG+YuJVHvoiJ83TbqZNpyHwNaQTYhDmdYpp2d/wTtTQywX4DuXb
 Y6NDJw5+kQ==
 =1PNK
 -----END PGP SIGNATURE-----

Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - ublk updates:
      - Add support for updating the size of a ublk instance
      - Zero-copy improvements
      - Auto-registering of buffers for zero-copy
      - Series simplifying and improving GET_DATA and request lookup
      - Series adding quiesce support
      - Lots of selftests additions
      - Various cleanups

 - NVMe updates via Christoph:
      - add per-node DMA pools and use them for PRP/SGL allocations
        (Caleb Sander Mateos, Keith Busch)
      - nvme-fcloop refcounting fixes (Daniel Wagner)
      - support delayed removal of the multipath node and optionally
        support the multipath node for private namespaces (Nilay Shroff)
      - support shared CQs in the PCI endpoint target code (Wilfred
        Mallawa)
      - support admin-queue only authentication (Hannes Reinecke)
      - use the crc32c library instead of the crypto API (Eric Biggers)
      - misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
        Reinecke, Leon Romanovsky, Gustavo A. R. Silva)

 - MD updates via Yu:
      - Fix that normal IO can be starved by sync IO, found by mkfs on
        newly created large raid5, with some clean up patches for bdev
        inflight counters

 - Clean up brd, getting rid of atomic kmaps and bvec poking

 - Add loop driver specifically for zoned IO testing

 - Eliminate blk-rq-qos calls with a static key, if not enabled

 - Improve hctx locking for when a plug has IO for multiple queues
   pending

 - Remove block layer bouncing support, which in turn means we can
   remove the per-node bounce stat as well

 - Improve blk-throttle support

 - Improve delay support for blk-throttle

 - Improve brd discard support

 - Unify IO scheduler switching. This should also fix a bunch of lockdep
   warnings we've been seeing, after enabling lockdep support for queue
   freezing/unfreezeing

 - Add support for block write streams via FDP (flexible data placement)
   on NVMe

 - Add a bunch of block helpers, facilitating the removal of a bunch of
   duplicated boilerplate code

 - Remove obsolete BLK_MQ pci and virtio Kconfig options

 - Add atomic/untorn write support to blktrace

 - Various little cleanups and fixes

* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
  selftests: ublk: add test for UBLK_F_QUIESCE
  ublk: add feature UBLK_F_QUIESCE
  selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
  traceevent/block: Add REQ_ATOMIC flag to block trace events
  ublk: run auto buf unregisgering in same io_ring_ctx with registering
  io_uring: add helper io_uring_cmd_ctx_handle()
  ublk: remove io argument from ublk_auto_buf_reg_fallback()
  ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
  selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
  selftests: ublk: support UBLK_F_AUTO_BUF_REG
  ublk: support UBLK_AUTO_BUF_REG_FALLBACK
  ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
  ublk: prepare for supporting to register request buffer automatically
  ublk: convert to refcount_t
  selftests: ublk: make IO & device removal test more stressful
  nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
  nvme: introduce multipath_always_on module param
  nvme-multipath: introduce delayed removal of the multipath head node
  nvme-pci: derive and better document max segments limits
  nvme-pci: use struct_size for allocation struct nvme_dev
  ...
 2025-05-26 11:39:36 -07:00
Rafael J. Wysocki
f34dc28343 Merge branch 'pm-cpufreq' 
Merge cpufreq updates for 6.16-rc1:

 - Refactor cpufreq_online(), add and use cpufreq policy locking guards,
   use __free() in policy reference counting, and clean up core cpufreq
   code on top of that (Rafael Wysocki).

 - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
   Kumar).

 - Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
   Ugwekar).

 - Add offline, online and suspend callbacks to the amd-pstate driver,
   rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
   Ugwekar).

 - Add support for the "Requested CPU Min frequency" BIOS option to the
   amd-pstate driver (Dhananjay Ugwekar).

 - Reset amd-pstate driver mode after running selftests (Swapnil
   Sapkal).

 - Add helper for governor checks to the schedutil cpufreq governor and
   move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).

 - Populate the cpu_capacity sysfs entries from the intel_pstate driver
   after registering asym capacity support (Ricardo Neri).

 - Add support for enabling Energy-aware scheduling (EAS) to the
   intel_pstate driver when operating in the passive mode on a hybrid
   platform (Rafael Wysocki).

 - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
   Chancellor).

 - Drop redundant cpus_read_lock() from store_local_boost() in the
   cpufreq core (Seyediman Seyedarab).

 - Replace sscanf() with kstrtouint() in the cpufreq code and use a
   symbol instead of a raw number in it (Bowen Yu).

 - Add support for autonomous CPU performance state selection to the
   CPPC cpufreq driver (Lifeng Zheng).

* pm-cpufreq: (31 commits)
  cpufreq: CPPC: Add support for autonomous selection
  cpufreq: Update sscanf() to kstrtouint()
  cpufreq: Replace magic number
  cpufreq: drop redundant cpus_read_lock() from store_local_boost()
  cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
  cpufreq: intel_pstate: Document hybrid processor support
  cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
  cpufreq: intel_pstate: EAS support for hybrid platforms
  cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
  cpufreq: intel_pstate: Populate the cpu_capacity sysfs entries
  arch_topology: Relocate cpu_scale to topology.[h|c]
  cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq
  cpufreq/sched: schedutil: Add helper for governor checks
  amd-pstate-ut: Reset amd-pstate driver mode after running selftests
  cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option
  cpufreq/amd-pstate: Add offline, online and suspend callbacks for amd_pstate_driver
  cpufreq: Force sync policy boost with global boost on sysfs update
  cpufreq: Preserve policy's boost state after resume
  cpufreq: Introduce policy_set_boost()
  cpufreq: Don't unnecessarily call set_boost()
  ...
 2025-05-26 20:19:40 +02:00
Linus Torvalds
181d8e399f vfs-6.16-rc1.misc 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
 om0+AQDMxKLweJXplqQQ7jxuvW2dEa60YpE2EalEKWGg9YA3KgEA3nI4kyKMKn7Y
 PRFXgIcKvhs62oJLKsq8SGQUqExqvAE=
 =atEw
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull misc vfs updates from Christian Brauner:
 "This contains the usual selections of misc updates for this cycle.

  Features:

   - Use folios for symlinks in the page cache

     FUSE already uses folios for its symlinks. Mirror that conversion
     in the generic code and the NFS code. That lets us get rid of a few
     folio->page->folio conversions in this path, and some of the few
     remaining users of read_cache_page() / read_mapping_page()

   - Try and make a few filesystem operations killable on the VFS
     inode->i_mutex level

   - Add sysctl vfs_cache_pressure_denom for bulk file operations

     Some workloads need to preserve more dentries than we currently
     allow through out sysctl interface

     A HDFS servers with 12 HDDs per server, on a HDFS datanode startup
     involves scanning all files and caching their metadata (including
     dentries and inodes) in memory. Each HDD contains approximately 2
     million files, resulting in a total of ~20 million cached dentries
     after initialization

     To minimize dentry reclamation, they set vfs_cache_pressure to 1.
     Despite this configuration, memory pressure conditions can still
     trigger reclamation of up to 50% of cached dentries, reducing the
     cache from 20 million to approximately 10 million entries. During
     the subsequent cache rebuild period, any HDFS datanode restart
     operation incurs substantial latency penalties until full cache
     recovery completes

     To maintain service stability, more dentries need to be preserved
     during memory reclamation. The current minimum reclaim ratio (1/100
     of total dentries) remains too aggressive for such workload. This
     patch introduces vfs_cache_pressure_denom for more granular cache
     pressure control

     The configuration [vfs_cache_pressure=1,
     vfs_cache_pressure_denom=10000] effectively maintains the full 20
     million dentry cache under memory pressure, preventing datanode
     restart performance degradation

   - Avoid some jumps in inode_permission() using likely()/unlikely()

   - Avid a memory access which is most likely a cache miss when
     descending into devcgroup_inode_permission()

   - Add fastpath predicts for stat() and fdput()

   - Anonymous inodes currently don't come with a proper mode causing
     issues in the kernel when we want to add useful VFS debug assert.
     Fix that by giving them a proper mode and masking it off when we
     report it to userspace which relies on them not having any mode

   - Anonymous inodes currently allow to change inode attributes because
     the VFS falls back to simple_setattr() if i_op->setattr isn't
     implemented. This means the ownership and mode for every single
     user of anon_inode_inode can be changed. Block that as it's either
     useless or actively harmful. If specific ownership is needed the
     respective subsystem should allocate anonymous inodes from their
     own private superblock

   - Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock

   - Add proper tests for anonymous inode behavior

   - Make it easy to detect proper anonymous inodes and to ensure that
     we can detect them in codepaths such as readahead()

  Cleanups:

   - Port pidfs to the new anon_inode_{g,s}etattr() helpers

   - Try to remove the uselib() system call

   - Add unlikely branch hint return path for poll

   - Add unlikely branch hint on return path for core_sys_select

   - Don't allow signals to interrupt getdents copying for fuse

   - Provide a size hint to dir_context for during readdir()

   - Use writeback_iter directly in mpage_writepages

   - Update compression and mtime descriptions in initramfs
     documentation

   - Update main netfs API document

   - Remove useless plus one in super_cache_scan()

   - Remove unnecessary NULL-check guards during setns()

   - Add separate separate {get,put}_cgroup_ns no-op cases

  Fixes:

   - Fix typo in root= kernel parameter description

   - Use KERN_INFO for infof()|info_plog()|infofc()

   - Correct comments of fs_validate_description()

   - Mark an unlikely if condition with unlikely() in
     vfs_parse_monolithic_sep()

   - Delete macro fsparam_u32hex()

   - Remove unused and problematic validate_constant_table()

   - Fix potential unsigned integer underflow in fs_name()

   - Make file-nr output the total allocated file handles"

* tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits)
  fs: Pass a folio to page_put_link()
  nfs: Use a folio in nfs_get_link()
  fs: Convert __page_get_link() to use a folio
  fs/read_write: make default_llseek() killable
  fs/open: make do_truncate() killable
  fs/open: make chmod_common() and chown_common() killable
  include/linux/fs.h: add inode_lock_killable()
  readdir: supply dir_context.count as readdir buffer size hint
  vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations
  fuse: don't allow signals to interrupt getdents copying
  Documentation: fix typo in root= kernel parameter description
  include/cgroup: separate {get,put}_cgroup_ns no-op case
  kernel/nsproxy: remove unnecessary guards
  fs: use writeback_iter directly in mpage_writepages
  fs: remove useless plus one in super_cache_scan()
  fs: add S_ANON_INODE
  fs: remove uselib() system call
  device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()
  fs/fs_parse: Remove unused and problematic validate_constant_table()
  fs: touch up predicts in inode_permission()
  ...
 2025-05-26 09:02:39 -07:00
Linus Torvalds
dc76285144 vfs-6.16-rc1.writepage 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTgAKCRCRxhvAZXjc
 ovkTAP9tyN24Oo+koY/2UedYBxM54cW4BCCRsVmkzfr8NSVdwwD/dg+v6gS8+nyD
 3jlR0Z/08UyMHapB7fnAuFxPXXc8oAo=
 =e55o
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull final writepage conversion from Christian Brauner:
 "This converts vboxfs from ->writepage() to ->writepages().

  This was the last user of the ->writepage() method. So remove
  ->writepage() completely and all references to it"

* tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: Remove aops->writepage
  mm: Remove swap_writepage() and shmem_writepage()
  ttm: Call shmem_writeout() from ttm_backup_backup_page()
  i915: Use writeback_iter()
  shmem: Add shmem_writeout()
  writeback: Remove writeback_use_writepage()
  migrate: Remove call to ->writepage
  vboxsf: Convert to writepages
  9p: Add a migrate_folio method
 2025-05-26 08:23:09 -07:00
SeongJae Park
6a4b3551ba Docs/damon: update titles and brief introductions to explain DAMOS 
DAMON was initially developed only for data access monitoring, and then
extended for not only access monitoring but also access-aware system
operations (DAMOS).  But the documents have old titles and brief
introductions for only the monitoring part.  Update the titles and the
brief introductions to explain DAMOS part together.

Link: https://lkml.kernel.org/r/20250513002715.40126-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-22 14:55:38 -07:00
Shashank Balaji
d16e7994c8 cgroup, docs: cpu controller's interaction with various scheduling policies 
The cpu controller interface files account for or affect processes
differently based on their scheduling policy, and the underlying
scheduler used (fair-class vs. BPF scheduler). Document these
differences

Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
 2025-05-22 09:10:54 -10:00
Shashank Balaji
79bfa4b38a cgroup, docs: convert space indentation to tab indentation 
The paragraphs on cpu.uclamp.{min,max} are space indented. Convert them to
tab indentation to make them uniform with the other paragraphs.

Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
 2025-05-22 09:07:02 -10:00
Coiby Xu
5eb3f60554 x86/crash: pass dm crypt keys to kdump kernel 
1st kernel will build up the kernel command parameter dmcryptkeys as
similar to elfcorehdr to pass the memory address of the stored info of dm
crypt key to kdump kernel.

Link: https://lkml.kernel.org/r/20250502011246.99238-8-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-21 10:48:21 -07:00
Coiby Xu
9ebfa8dcae crash_dump: reuse saved dm crypt keys for CPU/memory hot-plugging 
When there are CPU and memory hot un/plugs, the dm crypt keys may need to
be reloaded again depending on the solution for crash hotplug support. 
Currently, there are two solutions.  One is to utilizes udev to instruct
user space to reload the kdump kernel image and initrd, elfcorehdr and etc
again.  The other is to only update the elfcorehdr segment introduced in
commit 2472627561 ("crash: add generic infrastructure for crash hotplug
support").

For the 1st solution, the dm crypt keys need to be reloaded again.  The
user space can write true to /sys/kernel/config/crash_dm_crypt_key/reuse
so the stored keys can be re-used.

For the 2nd solution, the dm crypt keys don't need to be reloaded. 
Currently, only x86 supports the 2nd solution.  If the 2nd solution gets
extended to all arches, this patch can be dropped.

Link: https://lkml.kernel.org/r/20250502011246.99238-5-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-21 10:48:21 -07:00
Coiby Xu
180cf31af7 crash_dump: make dm crypt keys persist for the kdump kernel 
A configfs /sys/kernel/config/crash_dm_crypt_keys is provided for user
space to make the dm crypt keys persist for the kdump kernel.  Take the
case of dumping to a LUKS-encrypted target as an example, here is the life
cycle of the kdump copies of LUKS volume keys,

 1. After the 1st kernel loads the initramfs during boot, systemd uses
    an user-input passphrase to de-crypt the LUKS volume keys or simply
    TPM-sealed volume keys and then save the volume keys to specified
    keyring (using the --link-vk-to-keyring API) and the keys will expire
    within specified time.

 2. A user space tool (kdump initramfs loader like kdump-utils) create
    key items inside /sys/kernel/config/crash_dm_crypt_keys to inform
    the 1st kernel which keys are needed.

 3. When the kdump initramfs is loaded by the kexec_file_load
    syscall, the 1st kernel will iterate created key items, save the
    keys to kdump reserved memory.

 4. When the 1st kernel crashes and the kdump initramfs is booted, the
    kdump initramfs asks the kdump kernel to create a user key using the
    key stored in kdump reserved memory by writing yes to
    /sys/kernel/crash_dm_crypt_keys/restore. Then the LUKS encrypted
    device is unlocked with libcryptsetup's --volume-key-keyring API.

 5. The system gets rebooted to the 1st kernel after dumping vmcore to
    the LUKS encrypted device is finished

Eventually the keys have to stay in the kdump reserved memory for the
kdump kernel to unlock encrypted volumes.  During this process, some
measures like letting the keys expire within specified time are desirable
to reduce security risk.

This patch assumes,
1) there are 128 LUKS devices at maximum to be unlocked thus
   MAX_KEY_NUM=128.

2) a key description won't exceed 128 bytes thus KEY_DESC_MAX_LEN=128.

And here is a demo on how to interact with
/sys/kernel/config/crash_dm_crypt_keys,

    # Add key #1
    mkdir /sys/kernel/config/crash_dm_crypt_keys/7d26b7b4-e342-4d2d-b660-7426b0996720
    # Add key #1's description
    echo cryptsetup:7d26b7b4-e342-4d2d-b660-7426b0996720 > /sys/kernel/config/crash_dm_crypt_keys/description

    # how many keys do we have now?
    cat /sys/kernel/config/crash_dm_crypt_keys/count
    1

    # Add key# 2 in the same way

    # how many keys do we have now?
    cat /sys/kernel/config/crash_dm_crypt_keys/count
    2

    # the tree structure of /crash_dm_crypt_keys configfs
    tree /sys/kernel/config/crash_dm_crypt_keys/
    /sys/kernel/config/crash_dm_crypt_keys/
    ├── 7d26b7b4-e342-4d2d-b660-7426b0996720
    │   └── description
    ├── count
    ├── fce2cd38-4d59-4317-8ce2-1fd24d52c46a
    │   └── description

Link: https://lkml.kernel.org/r/20250502011246.99238-3-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-21 10:48:20 -07:00
Shashank Balaji
dc9f08bac2 cgroup, docs: be specific about bandwidth control of rt processes 
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
 2025-05-21 06:33:47 -10:00
Greg Kroah-Hartman
6381f99504 thunderbolt: Changes for v6.16 merge window 
This includes following USB4/Thunderbolt changes for the v6.16 merge
 window:
 
   - Enable wake on connect and disconnect over system suspend.
   - Add mapping between Type-C ports and USB4 ports on non-Chrome systems.
   - Expose tunneling related events to userspace.
 
 All these have been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAmgsVNUgHG1pa2Eud2Vz
 dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKCopQ/9GsI7l9d5gswZ
 w+LE1ouz5lOFlw+RV3EpMeb8nSzkTSoxtlM4gOlRg5zEec4l9MW6LUVQ/n0mBCNY
 R22Jc3KhgFqIX1G0XOW8t4g3piLAG3Q7NauzTSdRrC3bGKV73FjMw3WMSmlEE68E
 jQxmsfPnJdcM9joxCdHxIqVBfmTiv+IKU7+60a8YnIllfd+aaXcrbU4bRkgN/dbN
 f0Hw5av0K5K0qNejn/egaQHxBp9zJwzIitYTnLLncc5s0s44LPauJt+bxakeje92
 bae4oPJUZlJovOXwclT9alcZ78GjRNNx80CyF7QXVFWb6eXweKrOhveouyGaeXWw
 x4kJDZW2LroL5A1f+7i4iX6Ng9tqkCl18/KUGz+NDjghD9YTQtj1VYQlo0HEzX0O
 lnNxXPjkNAiTxxdGmcwhYSWZPGblTWfxYcrnrcnr11EBFWXyNw0i06sq4b1MdGpO
 2yTWlwQLFgLkMp003LUIUTiNVj7aEsAiPmHoApRfwcsehGLhPpPTpBDiFMLrvjwW
 ycZ5obGMsBsvrZMr3hSEACiGIT0j2pjl7IxVCaznjVW0qyaIv56mePBAxHCyL8nu
 wkDilYctsGwjIdBhsN4laZ7uGT3fByjBc6oetx+3VjY4ZO9oLKKQLcH49/ZGrfdP
 lZMUkiwyDR8Qsv8lNg6JXqg0SIFAqQE=
 =yU5Q
 -----END PGP SIGNATURE-----

Merge tag 'thunderbolt-for-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

Mika writes:

thunderbolt: Changes for v6.16 merge window

This includes following USB4/Thunderbolt changes for the v6.16 merge
window:

  - Enable wake on connect and disconnect over system suspend.
  - Add mapping between Type-C ports and USB4 ports on non-Chrome systems.
  - Expose tunneling related events to userspace.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  Documentation/admin-guide: Document Thunderbolt/USB4 tunneling events
  thunderbolt: Notify userspace about firmware CM tunneling events
  thunderbolt: Notify userspace about software CM tunneling events
  thunderbolt: Introduce domain event message handler
  usb: typec: Connect Type-C port with associated USB4 port
  thunderbolt: Add Thunderbolt/USB4 <-> USB3 match function
  thunderbolt: Expose usb4_port_index() to other modules
  thunderbolt: Fix a logic error in wake on connect
  thunderbolt: Use wake on connect and disconnect over suspend
 2025-05-21 12:26:51 +02:00
Shivam Sharma
95112d977f docs: admin-guide: fix typos in reporting-issues.rst 
Correct pin-point to pinpoint, If that the case to If that is the case,
and its only slightly modified to it's only slightly modified in
Documentation/admin-guide/reporting-issues.rst for proper spelling and grammar.

Signed-off-by: Shivam Sharma <10sharmashivam@gmail.com>
Acked-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250518172658.6983-1-10sharmashivam@gmail.com>
 2025-05-19 05:29:10 -06:00
Joel Fernandes
aafe12f980 rcutorture: Perform more frequent testing of ->gpwrap 
Currently, the ->gpwrap is not tested (at all per my testing) due to the
requirement of a large delta between a CPU's rdp->gp_seq and its node's
rnp->gpseq.

This results in no testing of ->gpwrap being set. This patch by default
adds 5 minutes of testing with ->gpwrap forced by lowering the delta
between rdp->gp_seq and rnp->gp_seq to just 8 GPs. All of this is
configurable, including the active time for the setting and a full
testing cycle.

By default, the first 25 minutes of a test will have the _default_
behavior there is right now (ULONG_MAX / 4) delta. Then for 5 minutes,
we switch to a smaller delta causing 1-2 wraps in 5 minutes. I believe
this is reasonable since we at least add a little bit of testing for
usecases where ->gpwrap is set.

[ Apply fix for Dan Carpenter's bug report on init path cleanup. ]
[ Apply kernel doc warning fix from Akira Yokosawa. ]

Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
 2025-05-16 11:13:27 -04:00
Jakub Kicinski
bebd7b2626 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR (net-6.15-rc7).

Conflicts:

tools/testing/selftests/drivers/net/hw/ncdevmem.c
  97c4e094a4 ("tests/ncdevmem: Fix double-free of queue array")
  2f1a805f32 ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au

Adjacent changes:

net/core/devmem.c
net/core/devmem.h
  0afc44d8cd ("net: devmem: fix kernel panic when netlink socket close after module unload")
  bd61848900 ("net: devmem: Implement TX path")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-05-15 11:28:30 -07:00
Srinivas Pandruvada
e636e3f742
Documentation: admin-guide: pm: Add documentation for die_id 
Add documentation to describe die_id attribute.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250508230250.1186619-6-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 2025-05-15 14:47:28 +03:00
Srinivas Pandruvada
bfbe7729d6
Documentation: admin-guide: pm: Add documentation for agent_types 
Add documentation to describe agent_types attribute.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250508230250.1186619-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 2025-05-15 14:47:24 +03:00
Yafang Shao
e7b9cea718
vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations 
On our HDFS servers with 12 HDDs per server, a HDFS datanode[0] startup
involves scanning all files and caching their metadata (including dentries
and inodes) in memory. Each HDD contains approximately 2 million files,
resulting in a total of ~20 million cached dentries after initialization.

To minimize dentry reclamation, we set vfs_cache_pressure to 1. Despite
this configuration, memory pressure conditions can still trigger
reclamation of up to 50% of cached dentries, reducing the cache from 20
million to approximately 10 million entries. During the subsequent cache
rebuild period, any HDFS datanode restart operation incurs substantial
latency penalties until full cache recovery completes.

To maintain service stability, we need to preserve more dentries during
memory reclamation. The current minimum reclaim ratio (1/100 of total
dentries) remains too aggressive for our workload. This patch introduces
vfs_cache_pressure_denom for more granular cache pressure control. The
configuration [vfs_cache_pressure=1, vfs_cache_pressure_denom=10000]
effectively maintains the full 20 million dentry cache under memory
pressure, preventing datanode restart performance degradation.

Link: https://hadoop.apache.org/docs/r1.2.1/hdfs_design.html#NameNode+and+DataNodes [0]

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/20250511083624.9305-1-laoar.shao@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2025-05-15 11:12:59 +02:00
Rafael J. Wysocki
f20af84c29 cpufreq: intel_pstate: Document hybrid processor support 
Describe the support for hybrid processors in intel_pstate, including
the CAS and EAS support, in the admin-guide documentation.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1935040.CQOukoFCf9@rjwysocki.net
 2025-05-13 14:35:25 +02:00
Ingo Molnar
c4070e1996 Merge commit 'its-for-linus-20250509-merge' into x86/core, to resolve conflicts 
Conflicts:
	Documentation/admin-guide/hw-vuln/index.rst
	arch/x86/include/asm/cpufeatures.h
	arch/x86/kernel/alternative.c
	arch/x86/kernel/cpu/bugs.c
	arch/x86/kernel/cpu/common.c
	drivers/base/cpu.c
	include/linux/cpu.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2025-05-13 10:47:10 +02:00
Ingo Molnar
69cb33e2f8 Merge branch 'x86/microcode' into x86/core, to merge dependent commits 
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:

  6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2025-05-13 10:37:52 +02:00
Petr Vaněk
678927c0c9
Documentation: fix typo in root= kernel parameter description 
Fixes a typo in the root= parameter description, changing
"this a a" to "this is a".

Fixes: c0c1a7dcb6 ("init: move the nfs/cifs/ram special cases out of name_to_dev_t")
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Link: https://lore.kernel.org/20250512110827.32530-1-arkamar@atlas.cz
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2025-05-13 09:27:57 +02:00
Alexander Graf
3498209ff6 Documentation: add documentation for KHO 
With KHO in place, let's add documentation that describes what it is and
how to use it.

Link: https://lkml.kernel.org/r/20250509074635.3187114-17-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:42 -07:00
Zhongkun He
b40599930f mm: add max swappiness arg to lru_gen for anonymous memory only 
The MGLRU already supports reclaiming only from anonymous memory via the
/sys/kernel/debug/lru_gen interface.  Now, memory.reclaim also supports
the swappiness=max parameter to enable reclaiming solely from anonymous
memory.  To unify the semantics of proactive reclaiming from anonymous
folios, the max parameter is introduced.

[hezhongkun.hzk@bytedance.com: use strcmp instead of strncmp, if swappiness is not set, use the default value]
  Link: https://lkml.kernel.org/r/20250507071057.3184240-1-hezhongkun.hzk@bytedance.com
[akpm@linux-foundation.org: tweak coding style]
Link: https://lkml.kernel.org/r/65181f7745d657d664d833c26d8a94cae40538b9.1745225696.git.hezhongkun.hzk@bytedance.com
Signed-off-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:36 -07:00
Zhongkun He
68a1436bde mm: add swappiness=max arg to memory.reclaim for only anon reclaim 
Patch series "add max arg to swappiness in memory.reclaim and lru_gen", v4.

This patchset adds max arg to swappiness in memory.reclaim and lru_gen for
anon only proactive memory reclaim.

With commit <68cd9050d871> ("mm: add swappiness= arg to memory.reclaim")
we can submit an additional swappiness=<val> argument to memory.reclaim. 
It is very useful because we can dynamically adjust the reclamation ratio
based on the anonymous folios and file folios of each cgroup.  For
example,when swappiness is set to 0, we only reclaim from file folios. 
But we can not relciam memory just from anon folios.

This patchset introduces a new macro, SWAPPINESS_ANON_ONLY, defined as
MAX_SWAPPINESS + 1, represent the max arg semantics.  It specifically
indicates that reclamation should occur only from anonymous pages.

Patch 1 adds swappiness=max arg to memory.reclaim suggested-by: Yosry
Ahmed

Patch 2 add more comments for cache_trim_mode from Johannes Weiner in [1].

Patch 3 add max arg to lru_gen for proactive memory reclaim in MGLRU.  The
MGLRU already supports reclaiming exclusively from anonymous pages.  This
patch formalizes that behavior by introducing a max parameter to represent
the corresponding semantics.

Patch 4 using SWAPPINESS_ANON_ONLY in MGLRU Using SWAPPINESS_ANON_ONLY
instead of MAX_SWAPPINESS + 1 to indicate reclaiming only from anonymous
pages makes the code more readable and explicit

Here is the previous discussion:
https://lore.kernel.org/all/20250314033350.1156370-1-hezhongkun.hzk@bytedance.com/
https://lore.kernel.org/all/20250312094337.2296278-1-hezhongkun.hzk@bytedance.com/
https://lore.kernel.org/all/20250318135330.3358345-1-hezhongkun.hzk@bytedance.com/


This patch (of 4):

With commit <68cd9050d871> ("mm: add swappiness= arg to memory.reclaim")
we can submit an additional swappiness=<val> argument to memory.reclaim. 
It is very useful because we can dynamically adjust the reclamation ratio
based on the anonymous folios and file folios of each cgroup.  For
example,when swappiness is set to 0, we only reclaim from file folios.

However,we have also encountered a new issue: when swappiness is set to
the MAX_SWAPPINESS, it may still only reclaim file folios.

So, we hope to add a new arg 'swappiness=max' in memory.reclaim where
proactive memory reclaim only reclaims from anonymous folios when
swappiness is set to max.  The swappiness semantics from a user
perspective remain unchanged.

For example, something like this:

echo "2M swappiness=max" > /sys/fs/cgroup/memory.reclaim

will perform reclaim on the rootcg with a swappiness setting of 'max' (a
new mode) regardless of the file folios.  Users have a more comprehensive
view of the application's memory distribution because there are many
metrics available.  For example, if we find that a certain cgroup has a
large number of inactive anon folios, we can reclaim only those and skip
file folios, because with the zram/zswap, the IO tradeoff that
cache_trim_mode or other file first logic is making doesn't hold - file
refaults will cause IO, whereas anon decompression will not.

With this patch, the swappiness argument of memory.reclaim has a new
mode 'max', means reclaiming just from anonymous folios both in traditional
LRU and MGLRU.

Link: https://lkml.kernel.org/r/cover.1745225696.git.hezhongkun.hzk@bytedance.com
Link: https://lore.kernel.org/all/20250314141833.GA1316033@cmpxchg.org/ [1]
Link: https://lkml.kernel.org/r/519e12b9b1f8c31a01e228c8b4b91a2419684f77.1745225696.git.hezhongkun.hzk@bytedance.com
Signed-off-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Suggested-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:35 -07:00
Shakeel Butt
c6c895cf2d memcg-introduce-non-blocking-limit-setting-option-v3 
add more explanation in doc and commit message on O_NONBLOCK side-effects
(Johannes)

Link: https://lkml.kernel.org/r/20250506232833.3109790-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:35 -07:00
Shakeel Butt
c8e6002bd6 memcg: introduce non-blocking limit setting option 
Setting the max and high limits can trigger synchronous reclaim and/or
oom-kill if the usage is higher than the given limit.  This behavior is
fine for newly created cgroups but it can cause issues for the node
controller while setting limits for existing cgroups.

In our production multi-tenant and overcommitted environment, we are
seeing priority inversion when the node controller dynamically adjusts the
limits of running jobs of different priorities.  Based on the system
situation, the node controller may reduce the limits of lower priority
jobs and increase the limits of higher priority jobs.  However we are
seeing node controller getting stuck for long period of time while
reclaiming from lower priority jobs while setting their limits and also
spends a lot of its own CPU.

One of the workaround we are trying is to fork a new process which sets
the limit of the lower priority job along with setting an alarm to get
itself killed if it get stuck in the reclaim for lower priority job. 
However we are finding it very unreliable and costly.  Either we need a
good enough time buffer for the alarm to be delivered after setting limit
and potentialy spend a lot of CPU in the reclaim or be unreliable in
setting the limit for much shorter but cheaper (less reclaim) alarms.

Let's introduce new limit setting option which does not trigger reclaim
and/or oom-kill and let the processes in the target cgroup to trigger
reclaim and/or throttling and/or oom-kill in their next charge request. 
This will make the node controller on multi-tenant overcommitted
environment much more reliable.

Explanation from Johannes on side-effects of O_NONBLOCK limit change:
  It's usually the allocating tasks inside the group bearing the cost of
  limit enforcement and reclaim. This allows a (privileged) updater from
  outside the group to keep that cost in there - instead of having to
  help, from a context that doesn't necessarily make sense.

  I suppose the tradeoff with that - and the reason why this was doing
  sync reclaim in the first place - is that, if the group is idle and
  not trying to allocate more, it can take indefinitely for the new
  limit to actually be met.

  It should be okay in most scenarios in practice. As the capacity is
  reallocated from group A to B, B will exert pressure on A once it
  tries to claim it and thereby shrink it down. If A is idle, that
  shouldn't be hard. If A is running, it's likely to fault/allocate
  soon-ish and then join the effort.

  It does leave a (malicious) corner case where A is just busy-hitting
  its memory to interfere with the clawback. This is comparable to
  reclaiming memory.low overage from the outside, though, which is an
  acceptable risk. Users of O_NONBLOCK just need to be aware.

Link: https://lkml.kernel.org/r/20250419183545.1982187-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:35 -07:00
Christoph Lameter (Ampere)
786d5cc2b9 Update Christoph's Email address and make it consistent 
Use cl@gentwo.org throughout and remove the old email addresses.

Link: https://lkml.kernel.org/r/8b962f57-4d98-cbb0-cd82-b6ba456733e8@gentwo.org
Signed-off-by: Christoph Lameter <cl@gentwo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:31 -07:00
SeongJae Park
a7bb1e7545 Docs/admin-guide/mm/damon/usage: document 'nid' file 
Add description of 'nid' file, which is optionally used for specific DAMOS
quota goal metrics such as node_mem_{used,free}_bp on DAMON usage
document.

Link: https://lkml.kernel.org/r/20250420194030.75838-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-12 23:50:30 -07:00
Zhiquan Li
247021624a crash: export PAGE_UNACCEPTED_MAPCOUNT_VALUE to vmcoreinfo 
On Intel TDX guest, unaccepted memory is unusable free memory which is not
managed by buddy, until it's accepted by guest.  Before that, it cannot be
accessed by the first kernel as well as the kexec'ed kernel.  The kexec'ed
kernel will skip these pages and fill in zero data for the reader of
vmcore.

The dump tool like makedumpfile creates a page descriptor (size 24 bytes)
for each non-free page, including zero data page, but it will not create
descriptor for free pages.  If it is not able to distinguish these
unaccepted pages with zero data pages, a certain amount of space will be
wasted in proportion (~1/170).  In fact, as a special kind of free page
the unaccepted pages should be excluded, like the real free pages.

Export the page type PAGE_UNACCEPTED_MAPCOUNT_VALUE to vmcoreinfo, so that
dump tool can identify whether a page is unaccepted.

[zhiquan1.li@intel.com: fix docs: "Title underline too short" warning]
  Link: https://lore.kernel.org/all/20240809114854.3745464-5-kirill.shutemov@linux.intel.com/
  Link: https://lkml.kernel.org/r/20250405060610.860465-1-zhiquan1.li@intel.com
Link: https://lore.kernel.org/all/20240809114854.3745464-5-kirill.shutemov@linux.intel.com/
Link: https://lkml.kernel.org/r/20250403030801.758687-1-zhiquan1.li@intel.com
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-11 17:54:04 -07:00
Sergey Senozhatsky
b05f8d7e07 Documentation: zram: update IDLE pages tracking documentation 
Move IDLE pages tracking into a separate chapter because there are
multiple features that use (or depend on) it either in built-in variant
("mark all") or in extended variant (ac-time tracking).

In addition, recompression doesn't require memory tracking to be enabled
in order to be able to perform idle recompression.

Link: https://lkml.kernel.org/r/20250416042833.3858827-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Shin Kawamura <kawasin@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-11 17:48:33 -07:00
Andrei Vagin
a516403787 fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions 
Patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard
regions", v2.

Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions.  This allows userspace tools, such as
CRIU, to detect and handle guard regions.

Currently, CRIU utilizes PAGEMAP_SCAN as a more efficient alternative to
parsing /proc/pid/pagemap.  Without this change, guard regions are
incorrectly reported as swap-anon regions, leading CRIU to attempt dumping
them and subsequently failing.

The series includes updates to the documentation and selftests to reflect
the new functionality.


This patch (of 3):

Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions.  This allows userspace tools, such as
CRIU, to detect and handle guard regions.

Link: https://lkml.kernel.org/r/20250324065328.107678-1-avagin@google.com
Link: https://lkml.kernel.org/r/20250324065328.107678-2-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-11 17:48:16 -07:00
Michal Clapinski
98c9389042 mm/compaction: reduce the difference between low and high watermarks 
Reduce the diff between low and high watermarks when compaction
proactiveness is set to high.  This allows users who set the proactiveness
really high to have more stable fragmentation score over time.

Link: https://lkml.kernel.org/r/20250404111103.1994507-3-mclapinski@google.com
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-11 17:48:10 -07:00
Sergey Senozhatsky
cf42d4cccf zram: modernize writeback interface 
The writeback interface supports a page_index=N parameter which performs
writeback of the given page.  Since we rarely need to writeback just one
single page, the typical use case involves a number of writeback calls,
each performing writeback of one page:

  echo page_index=100 > zram0/writeback
  ...
  echo page_index=200 > zram0/writeback
  echo page_index=500 > zram0/writeback
  ...
  echo page_index=700 > zram0/writeback

One obvious downside of this is that it increases the number of syscalls. 
Less obvious, but a significantly more important downside, is that when
given only one page to post-process zram cannot perform an optimal target
selection.  This becomes a critical limitation when writeback_limit is
enabled, because under writeback_limit we want to guarantee the highest
memory savings hence we first need to writeback pages that release the
highest amount of zsmalloc pool memory.

This patch adds page_indexes=LOW-HIGH parameter to the writeback
interface:

  echo page_indexes=100-200 page_indexes=500-700 > zram0/writeback

This gives zram a chance to apply an optimal target selection strategy on
each iteration of the writeback loop.

We also now permit multiple page_index parameters per call (previously
zram would recognize only one page_index) and a mix or single pages and
page ranges:

  echo page_index=42 page_index=99 page_indexes=100-200 \
       page_indexes=500-700 > zram0/writeback

Apart from that the patch also unifies parameters passing and resembles
other "modern" zram device attributes (e.g.  recompression), while the old
interface used a mixed scheme: values-less parameters for mode and a
key=value format for page_index.  We still support the "old" value-less
format for compatibility reasons.

[senozhatsky@chromium.org: simplify parse_page_index() range checks, per Brian]
  nk: https://lkml.kernel.org/r/20250404015327.2427684-1-senozhatsky@chromium.org
[sozhatsky@chromium.org: fix uninitialized variable in zram_writeback_slots(), per Dan]
  nk: https://lkml.kernel.org/r/20250409112611.1154282-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20250327015818.4148660-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-05-11 17:48:09 -07:00
Pawan Gupta
facd226f7e x86/its: Add support for RSB stuffing mitigation 
When retpoline mitigation is enabled for spectre-v2, enabling
call-depth-tracking and RSB stuffing also mitigates ITS. Add cmdline option
indirect_target_selection=stuff to allow enabling RSB stuffing mitigation.

When retpoline mitigation is not enabled, =stuff option is ignored, and
default mitigation for ITS is deployed.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
 2025-05-09 13:22:05 -07:00
Pawan Gupta
2665281a07 x86/its: Add "vmexit" option to skip mitigation on some CPUs 
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.

When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
 2025-05-09 13:22:05 -07:00
Pawan Gupta
f4818881c4 x86/its: Enable Indirect Target Selection mitigation 
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.

Scope of impact
===============

Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.

Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.

User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.

Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.

Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.

When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.

To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
 2025-05-09 13:22:05 -07:00
Pawan Gupta
1ac116ce64 Documentation: x86/bugs/its: Add ITS documentation 
Add the admin-guide for Indirect Target Selection (ITS).

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
 2025-05-09 13:22:04 -07:00
Zihuan Zhang
50c9bb30dc PM: hibernate: add configurable delay for pm_test 
Turn the default 5 second test delay for hibernation into a
configurable module parameter, so users can determine how
long to wait in this pseudo-hibernate state before resuming
the system.

The configurable delay parameter has been added for suspend, so
add an analogous one for hibernation.

Example (wait 30 seconds);

  # echo 30 > /sys/module/hibernate/parameters/pm_test_delay
  # echo core > /sys/power/pm_test

Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20250507063520.419635-1-zhangzihuan@kylinos.cn
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-05-09 15:59:10 +02:00
Keke Li
f8953ee959 Documentation: media: Add documentation file c3-isp.rst 
Add the file 'c3-isp.rst' that documents the c3-isp driver.

Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
 2025-05-09 12:08:37 +02:00
Darrick J. Wong
4528b90527 xfs: allow sysadmins to specify a maximum atomic write limit at mount time 
Introduce a mount option to allow sysadmins to specify the maximum size
of an atomic write.  If the filesystem can work with the supplied value,
that becomes the new guaranteed maximum.

The value mustn't be too big for the existing filesystem geometry (max
write size, max AG/rtgroup size).  We dynamically recompute the
tr_atomic_write transaction reservation based on the given block size,
check that the current log size isn't less than the new minimum log size
constraints, and set a new maximum.

The actual software atomic write max is still computed based off of
tr_atomic_ioend the same way it has for the past few commits.  Note also
that xfs_calc_atomic_write_log_geometry is non-static because mkfs will
need that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
 2025-05-07 14:25:33 -07:00
Bagas Sanjaya
4804f5ad5d x86/cpu: Add "Old Microcode" docs to hw-vuln toctree 
Sphinx reports missing toctree entry warning:

Documentation/admin-guide/hw-vuln/old_microcode.rst: WARNING: document isn't included in any toctree

Add entry for "Old Microcode" docs to fix the warning.

Fixes: 4e2c719782 ("x86/cpu: Help users notice when running old Intel microcode")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250502023358.14846-1-bagasdotme%40gmail.com
 2025-05-02 11:33:35 -07:00
Damien Le Moal
9e4f11c122 Documentation: Document the new zoned loop block device driver 
Introduce the zoned_loop.rst documentation file under
admin-guide/blockdev to document the zoned loop block device driver.
An overview of the driver is provided and its usage to create and delete
zoned devices described.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250407075222.170336-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2025-05-01 17:03:56 -06:00
Jakub Kicinski
337079d31f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR (net-6.15-rc5).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-05-01 15:11:38 -07:00
Arnd Bergmann
118c40b7b5 kbuild: require gcc-8 and binutils-2.30 
Commit a3e8fe814a ("x86/build: Raise the minimum GCC version to 8.1")
raised the minimum compiler version as enforced by Kbuild to gcc-8.1
and clang-15 for x86.

This is actually the same gcc version that has been discussed as the
minimum for all architectures several times in the past, with little
objection. A previous concern was the kernel for SLE15-SP7 needing to
be built with gcc-7. As this ended up still using linux-6.4 and there
is no plan for an SP8, this is no longer a problem.

Change it for all architectures and adjust the documentation accordingly.
A few version checks can be removed in the process.  The binutils
version 2.30 is the lowest version used in combination with gcc-8 on
common distros, so use that as the corresponding minimum.

Link: https://lore.kernel.org/lkml/20240925150059.3955569-32-ardb+git@google.com/
Link: https://lore.kernel.org/lkml/871q7yxrgv.wl-tiwai@suse.de/
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2025-04-30 21:53:35 +02:00
Joel Savitz
c0fe189b59 docs: namespace: Tweak and reword resource control doc 
Fix the document title and reword the phrasing to active voice.

Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Message-ID: <20250421161723.1138903-1-jsavitz@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
 2025-04-28 18:00:06 -06:00
Martin Tůma
1a27fce0fa docs: media: mgb4: Improve mgb4 driver documentation 
Add some basic info about the HW/driver + contact info.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
 2025-04-25 15:14:28 +02:00
Lukas Bulwahn
29d69273fe media: remove STA2x11 media pci driver 
With commit dcbb01fbb7 ("x86/pci: Remove old STA2x11 support"), the
STA2X11 Video Input Port driver is not needed and cannot be built anymore.

Remove the driver and its reference in media documentation.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
 2025-04-25 15:14:25 +02:00
Alan Borzeszkowski
36f6f7e2d4 Documentation/admin-guide: Document Thunderbolt/USB4 tunneling events 
Add documentation about the Thunderbolt/USB4 tunneling events to the
user’s and administrator’s guide.

Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
 2025-04-24 08:24:39 +03:00
Hans Holmberg
f0447f80ae xfs: remove duplicate Zoned Filesystems sections in admin-guide 
Remove the duplicated section and while at it, turn spaces into tabs.

Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Fixes: c7b67ddc3c ("xfs: document zoned rt specifics in admin-guide")
Signed-off-by: Carlos Maiolino <cem@kernel.org>
 2025-04-22 16:05:24 +02:00
Dave Hansen
4e2c719782 x86/cpu: Help users notice when running old Intel microcode 
Old microcode is bad for users and for kernel developers.

For users, it exposes them to known fixed security and/or functional
issues. These obviously rarely result in instant dumpster fires in
every environment. But it is as important to keep your microcode up
to date as it is to keep your kernel up to date.

Old microcode also makes kernels harder to debug. A developer looking
at an oops need to consider kernel bugs, known CPU issues and unknown
CPU issues as possible causes. If they know the microcode is up to
date, they can mostly eliminate known CPU issues as the cause.

Make it easier to tell if CPU microcode is out of date. Add a list
of released microcode. If the loaded microcode is older than the
release, tell users in a place that folks can find it:

	/sys/devices/system/cpu/vulnerabilities/old_microcode

Tell kernel kernel developers about it with the existing taint
flag:

	TAINT_CPU_OUT_OF_SPEC

== Discussion ==

When a user reports a potential kernel issue, it is very common
to ask them to reproduce the issue on mainline. Running mainline,
they will (independently from the distro) acquire a more up-to-date
microcode version list. If their microcode is old, they will
get a warning about the taint and kernel developers can take that
into consideration when debugging.

Just like any other entry in "vulnerabilities/", users are free to
make their own assessment of their exposure.

== Microcode Revision Discussion ==

The microcode versions in the table were generated from the Intel
microcode git repo:

	8ac9378a8487 ("microcode-20241112 Release")

which as of this writing lags behind the latest microcode-20250211.

It can be argued that the versions that the kernel picks to call "old"
should be a revision or two old. Which specific version is picked is
less important to me than picking *a* version and enforcing it.

This repository contains only microcode versions that Intel has deemed
to be OS-loadable. It is quite possible that the BIOS has loaded a
newer microcode than the latest in this repo. If this happens, the
system is considered to have new microcode, not old.

Specifically, the sysfs file and taint flag answer the question:

	Is the CPU running on the latest OS-loadable microcode,
	or something even later that the BIOS loaded?

In other words, Intel never publishes an authoritative list of CPUs
and latest microcode revisions. Until it does, this is the best that
Linux can do.

Also note that the "intel-ucode-defs.h" file is simple, ugly and
has lots of magic numbers. That's on purpose and should allow a
single file to be shared across lots of stable kernel regardless of if
they have the new "VFM" infrastructure or not. It was generated with
a dumb script.

== FAQ ==

Q: Does this tell me if my system is secure or insecure?
A: No. It only tells you if your microcode was old when the
   system booted.

Q: Should the kernel warn if the microcode list itself is too old?
A: No. New kernels will get new microcode lists, both mainline
   and stable. The only way to have an old list is to be running
   an old kernel in which case you have bigger problems.

Q: Is this for security or functional issues?
A: Both.

Q: If a given microcode update only has functional problems but
   no security issues, will it be considered old?
A: Yes. All microcode image versions within a microcode release
   are treated identically. Intel appears to make security
   updates without disclosing them in the release notes.  Thus,
   all updates are considered to be security-relevant.

Q: Who runs old microcode?
A: Anybody with an old distro. This happens all the time inside
   of Intel where there are lots of weird systems in labs that
   might not be getting regular distro updates and might also
   be running rather exotic microcode images.

Q: If I update my microcode after booting will it stop saying
   "Vulnerable"?
A: No. Just like all the other vulnerabilies, you need to
   reboot before the kernel will reassess your vulnerability.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/20250421195659.CF426C07%40davehans-spike.ostc.intel.com
(cherry picked from commit 9127865b15eb0a1bd05ad7efe29489c44394bdc1)
 2025-04-22 08:33:52 +02:00
Jakub Kicinski
240ce924d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR (net-6.15-rc3).

No conflicts. Adjacent changes:

tools/net/ynl/pyynl/ynl_gen_c.py
  4d07bbf2d4 ("tools: ynl-gen: don't declare loop iterator in place")
  7e8ba0c7de ("tools: ynl: don't use genlmsghdr in classic netlink")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-04-17 12:26:50 -07:00
Hans Holmberg
c7b67ddc3c xfs: document zoned rt specifics in admin-guide 
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.

Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/

Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
 2025-04-17 08:16:59 +02:00
Artem Bityutskiy
af3a1b6a18 Documentation: admin-guide: pm: Document intel_idle C1 demotion 
Document the intel_idle driver sysfs file for enabling/disabling C1
demotion.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250317135541.1471754-3-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-04-15 20:38:26 +02:00
Randy Dunlap
e54ac58667 cpufreq: editing corrections to cpufreq.rst 
Change a few words and abbreviations/punctuation.

Change one echo command to include a trailing '`'.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250405001447.4039463-1-rdunlap@infradead.org
 2025-04-14 10:29:32 -06:00
James Addison
3fa3b20ba1 docs: Disambiguate a pair of rST labels 
According to the reStructuredText documentation, internal hyperlink
targets[1] are intended to resolve within the current document.

Sphinx has a bug that causes internal hyperlinks declared with
duplicate names to resolve nondeterministically, producing incorrect
documentation. Sphinx does not yet emit a warning when these
duplicate target names are declared.

To improve the reproducibility and correctness of the HTML
documentation, disambiguate two labels both previously titled
"submit_improvements".

[1] - https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#hyperlink-targets

Link: https://github.com/sphinx-doc/sphinx/issues/13383
Signed-off-by: James Addison <jay@jp-hosting.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250407195120.331103-2-jvanderwaa@redhat.com
 2025-04-14 10:22:46 -06:00
Hans Holmberg
845abeb1f0 xfs: add tunable threshold parameter for triggering zone GC 
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.

Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.

This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.

To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.

This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.

Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
 2025-04-14 10:41:33 +02:00
Kuniyuki Iwashima
2a63dd0edf net: Retire DCCP socket. 
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.

In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot.  Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.

Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").

Since then, only one individual has contacted the netdev mailing list. [0]

There is ongoing research for Multipath DCCP.  The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community.  While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:

  "This is not Open Source software."

The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.

Maintaining DCCP for a decade without any real users has become a burden.

Therefore, it's time to remove it.

Removing DCCP will also provide significant benefits to TCP.  It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.

Note that we keep DCCP netfilter modules as requested.  [3]

Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-04-11 18:58:10 -07:00
Kurt Borja
3e48767ab5
Documentation: admin-guide: laptops: Add documentation for alienware-wmi 
Add driver admin-guide documentation for the alienware-wmi driver.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-11-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 2025-04-11 13:10:16 +03:00