mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 22:23:05 +00:00
arm64: dts: qcom: Add support for SONY Xperia X/X Compact
This adds support for the Sony Xperia Loire/SmartLoire platform with a base configuration that is common across all of the devices that are based on this project. Also adds a base DT configuration for the Xperia X and Xperia X Compact (respectively, Suzu and Kugo) which is valid for both their RoW (single-sim), DSDS (dual-sim) and other regional variants of these two smartphones, that makes us able to boot to a UART console. Please note that, currently, the APC0/1 (cluster 0/1) vregs are set to a safe voltage in order to ensure boot stability until a proper solution for CPU DVFS scaling lands. Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221111120156.48040-12-angelogioacchino.delregno@collabora.com
This commit is contained in:
AngeloGioacchino Del Regno
Bjorn Andersson
parent
0484d3ce09
commit
ff7f6d34ca
@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
|
||||
|
||||
35
arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
Normal file
35
arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
Normal file
@ -0,0 +1,35 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2016-2022, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
* Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8956-sony-xperia-loire.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia X Compact";
|
||||
compatible = "sony,kugo-row", "qcom,msm8956";
|
||||
chassis-type = "handset";
|
||||
};
|
||||
|
||||
&blsp2_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
/* FUSB301 USB-C Controller */
|
||||
};
|
||||
|
||||
&blsp2_i2c4 {
|
||||
status = "okay";
|
||||
|
||||
/* ST STMVL53L0 ToF @ 29 */
|
||||
/* AMS TCS349 RGBCIR @ 72 */
|
||||
};
|
||||
|
||||
&pm8950_l1 {
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
17
arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
Normal file
17
arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
Normal file
@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2016-2022, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
* Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8956-sony-xperia-loire.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia X";
|
||||
compatible = "sony,suzu-row", "qcom,msm8956";
|
||||
chassis-type = "handset";
|
||||
};
|
||||
282
arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
Normal file
282
arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
Normal file
@ -0,0 +1,282 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2016-2022, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
* Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
|
||||
*/
|
||||
|
||||
#include "msm8956.dtsi"
|
||||
|
||||
#include "pm8004.dtsi"
|
||||
#include "pm8950.dtsi"
|
||||
#include "pmi8950.dtsi"
|
||||
|
||||
/ {
|
||||
qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
|
||||
qcom,board-id = <8 0>;
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
|
||||
mmc1 = &sdhc_2; /* SDC2 SD card slot */
|
||||
mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
|
||||
serial0 = &blsp2_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
cont-splash@83000000 {
|
||||
reg = <0x0 0x83000000 0x0 0x2800000>;
|
||||
};
|
||||
|
||||
ramoops@57f00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0x57f00000 0 0x100000>;
|
||||
record-size = <0x20000>;
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x20000>;
|
||||
pmsg-size = <0x20000>;
|
||||
ecc-size = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
usbphy_1p2: regulator-usbphy-1p2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usbphy-1p2";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
vph_pwr: regulator-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph-pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c4 {
|
||||
status = "okay";
|
||||
|
||||
/* Synaptics RMI4 @ 2c */
|
||||
};
|
||||
|
||||
&blsp2_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
vdd_gfx-supply = <&pm8004_s5>;
|
||||
};
|
||||
|
||||
&otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8004_spmi_regulators {
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
|
||||
/* Cluster 1 supply */
|
||||
pm8004_s2: s2 {
|
||||
/* regulator-min-microvolt = <500000>; */
|
||||
/* Set .95V to prevent unstabilities until CPR for this SoC is done */
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1165000>;
|
||||
regulator-name = "vdd_apc1";
|
||||
/* Set always on until the CPU PLL is done */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8004_s5: s5 {
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1165000>;
|
||||
regulator-enable-ramp-delay = <500>;
|
||||
regulator-name = "vdd_gfx";
|
||||
/* Hack this on until the gpu driver is ready for it */
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8950_spmi_regulators {
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
|
||||
/* Cluster 0 supply */
|
||||
pm8950_spmi_s5: s5 {
|
||||
/* Set .95V to prevent unstabilities until CPR for this SoC is done */
|
||||
/* regulator-min-microvolt = <790000>; */
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1165000>;
|
||||
regulator-name = "vdd_apc0";
|
||||
/* Set always on until the CPU PLL is done */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
pm8950_regulators: regulators {
|
||||
compatible = "qcom,rpm-pm8950-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s6-supply = <&vph_pwr>;
|
||||
vdd_l1_l19-supply = <&pm8950_s3>;
|
||||
vdd_l2_l23-supply = <&pm8950_s3>;
|
||||
vdd_l3-supply = <&pm8950_s3>;
|
||||
vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
|
||||
vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
|
||||
|
||||
pm8950_s1: s1 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1162500>;
|
||||
};
|
||||
|
||||
pm8950_s3: s3 {
|
||||
regulator-min-microvolt = <1325000>;
|
||||
regulator-max-microvolt = <1325000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8950_s4: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8950_l1: l1 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
pm8950_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8950_l3: l3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8950_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-system-load = <290000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8950_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l8: l8 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-system-load = <130000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8950_l9: l9 {
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2400000>;
|
||||
};
|
||||
|
||||
pm8950_l10: l10 {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8950_l11: l11 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <60000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8950_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <100000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8950_l13: l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
pm8950_l14: l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8950_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8950_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l17: l17 {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8950_l22: l22 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
pm8950_l23: l23 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
/* Toshiba THGBMHG8C4LBAU7 (032G34) */
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
vmmc-supply = <&pm8950_l8>;
|
||||
vqmmc-supply = <&pm8950_l5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
|
||||
vmmc-supply = <&pm8950_l11>;
|
||||
vqmmc-supply = <&pm8950_l12>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>;
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
vdd-supply = <&usbphy_1p2>;
|
||||
vdda1p8-supply = <&pm8950_l7>;
|
||||
vdda3p3-supply = <&pm8950_l13>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user