mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-02 08:32:55 +00:00
arm64: add initial device tree for TQMa93xx/MBa91xxCA
This adds support for TQMa93xx module attached to MBa91xxCA board. TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and secure element. TQMa93xxCA can be attached directly while TQMa93xxLA needs an adapter. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Markus Niebel
Shawn Guo
parent
97dc91c045
commit
e5bc07026f
@ -300,6 +300,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
|
||||
|
||||
749
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
Normal file
749
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
Normal file
@ -0,0 +1,749 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
|
||||
* D-82229 Seefeld, Germany.
|
||||
* Author: Markus Niebel
|
||||
* Author: Alexander Stein
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "imx93-tqma9352.dtsi"
|
||||
|
||||
/{
|
||||
model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa91xxCA starter kit";
|
||||
compatible = "tq,imx93-tqma9352-mba91xxca", "tq,imx93-tqma9352", "fsl,imx93";
|
||||
chassis-type = "embedded";
|
||||
|
||||
chosen {
|
||||
stdout-path = &lpuart1;
|
||||
};
|
||||
|
||||
aliases {
|
||||
eeprom0 = &eeprom0;
|
||||
ethernet0 = &eqos;
|
||||
ethernet1 = &fec;
|
||||
rtc0 = &pcf85063;
|
||||
rtc1 = &bbnsm_rtc;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&tpm2 2 5000000 0>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
power-supply = <®_12v0>;
|
||||
enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
display: display {
|
||||
/*
|
||||
* Display is not fixed, so compatible has to be added from
|
||||
* DT overlay
|
||||
*/
|
||||
power-supply = <®_3v3>;
|
||||
enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
|
||||
backlight = <&backlight>;
|
||||
status = "disabled";
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
fan0: gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
|
||||
gpio-fan,speed-map = <0 0>, <10000 1>;
|
||||
fan-supply = <®_12v0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
switch-a {
|
||||
label = "switcha";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
switch-b {
|
||||
label = "switchb";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
|
||||
};
|
||||
|
||||
lvds_encoder: lvds-encoder {
|
||||
compatible = "ti,sn75lvds83", "lvds-encoder";
|
||||
powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
|
||||
power-supply = <®_3v3>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
lvds_encoder_input: endpoint {
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
lvds_encoder_output: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reg_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_3V3_MB";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
reg_5v0: regulator-5v0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_5V0_MB";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_12v0: regulator-12v0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_mpcie_1v5: regulator-mpcie-1v5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_1V5_MPCIE";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_mpcie_3v3: regulator-mpcie-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_3V3_MPCIE";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal {
|
||||
trips {
|
||||
cpu_active: trip-active0 {
|
||||
temperature = <40000>;
|
||||
hysteresis = <5000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map1 {
|
||||
trip = <&cpu_active>;
|
||||
cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&eqos {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_eqos>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðphy_eqos>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy_eqos: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_eqos_phy>;
|
||||
reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <500000>;
|
||||
reset-deassert-us = <50000>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
|
||||
enet-phy-lane-no-swap;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
ti,dp83867-rxctrl-strap-quirk;
|
||||
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðphy_fec>;
|
||||
fsl,magic-packet;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-frequency = <5000000>;
|
||||
|
||||
ethphy_fec: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec_phy>;
|
||||
reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <500000>;
|
||||
reset-deassert-us = <50000>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
|
||||
enet-phy-lane-no-swap;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
ti,dp83867-rxctrl-strap-quirk;
|
||||
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flexcan1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flexcan1>;
|
||||
xceiver-supply = <®_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
/* 00 */ "", "", "", "PMIC_IRQ#",
|
||||
/* 04 */ "", "", "", "",
|
||||
/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
|
||||
/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
|
||||
/* 16 */ "", "", "", "",
|
||||
/* 20 */ "", "", "", "",
|
||||
/* 24 */ "", "", "", "",
|
||||
/* 28 */ "", "", "", "";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names =
|
||||
/* 00 */ "", "", "", "",
|
||||
/* 04 */ "", "", "", "",
|
||||
/* 08 */ "", "", "", "",
|
||||
/* 12 */ "", "", "", "",
|
||||
/* 16 */ "", "", "", "",
|
||||
/* 20 */ "", "", "", "",
|
||||
/* 24 */ "", "", "", "",
|
||||
/* 28 */ "", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names =
|
||||
/* 00 */ "SD2_CD#", "", "", "",
|
||||
/* 04 */ "", "", "", "SD2_RST#",
|
||||
/* 08 */ "", "", "", "",
|
||||
/* 12 */ "", "", "", "",
|
||||
/* 16 */ "", "", "", "",
|
||||
/* 20 */ "", "", "", "",
|
||||
/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
|
||||
/* 28 */ "", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names =
|
||||
/* 00 */ "", "", "", "",
|
||||
/* 04 */ "", "", "", "",
|
||||
/* 08 */ "", "", "", "",
|
||||
/* 12 */ "", "", "", "",
|
||||
/* 16 */ "", "", "", "",
|
||||
/* 20 */ "", "", "", "",
|
||||
/* 24 */ "", "", "", "",
|
||||
/* 28 */ "", "", "", "";
|
||||
};
|
||||
|
||||
&lpi2c3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&pinctrl_lpi2c3>;
|
||||
pinctrl-1 = <&pinctrl_lpi2c3>;
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@1c {
|
||||
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
|
||||
reg = <0x1c>;
|
||||
};
|
||||
|
||||
ptn5110: usb-typec@50 {
|
||||
compatible = "nxp,ptn5110", "tcpci";
|
||||
reg = <0x50>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_typec>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "X17";
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
try-power-role = "sink";
|
||||
typec-power-opmode = "default";
|
||||
pd-disable;
|
||||
self-powered;
|
||||
|
||||
port {
|
||||
typec_con_hs: endpoint {
|
||||
remote-endpoint = <&typec_hs>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom2: eeprom@54 {
|
||||
compatible = "nxp,se97b", "atmel,24c02";
|
||||
reg = <0x54>;
|
||||
pagesize = <16>;
|
||||
vcc-supply = <®_3v3>;
|
||||
};
|
||||
|
||||
expander0: gpio@70 {
|
||||
compatible = "nxp,pca9538";
|
||||
reg = <0x70>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pexp_irq>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
||||
vcc-supply = <®_3v3>;
|
||||
gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
|
||||
"MPCIE_1V5_EN", "MPCIE_3V3_EN",
|
||||
"MPCIE_PERST#", "MPCIE_WDISABLE#",
|
||||
"BUTTON_A#", "BUTTON_B#";
|
||||
|
||||
temp-event-mod-hog {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
input;
|
||||
line-name = "TEMP_EVENT_MOD#";
|
||||
};
|
||||
|
||||
mpcie-wake-hog {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
input;
|
||||
line-name = "MPCIE_WAKE#";
|
||||
};
|
||||
|
||||
/*
|
||||
* Controls the mPCIE slot reset which is low active as
|
||||
* reset signal. The output-low states, the signal is
|
||||
* inactive, e.g. not in reset
|
||||
*/
|
||||
mpcie_rst_hog: mpcie-rst-hog {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "MPCIE_PERST#";
|
||||
};
|
||||
|
||||
/*
|
||||
* Controls the mPCIE slot WDISABLE pin which is low active
|
||||
* as disable signal. The output-low states, the signal is
|
||||
* inactive, e.g. not disabled
|
||||
*/
|
||||
mpcie_wdisable_hog: mpcie-wdisable-hog {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "MPCIE_WDISABLE#";
|
||||
};
|
||||
};
|
||||
|
||||
expander1: gpio@71 {
|
||||
compatible = "nxp,pca9538";
|
||||
reg = <0x71>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
vcc-supply = <®_3v3>;
|
||||
gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
|
||||
"USB_RESET#", "",
|
||||
"WLAN_PD#", "WLAN_W_DISABLE#",
|
||||
"WLAN_PERST#", "12V_EN";
|
||||
|
||||
/*
|
||||
* Controls the WiFi card PD pin which is low active
|
||||
* as power down signal. The output-low states, the signal
|
||||
* is inactive, e.g. not power down
|
||||
*/
|
||||
wlan-pd-hog {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "WLAN_PD#";
|
||||
};
|
||||
|
||||
/*
|
||||
* Controls the WiFi card disable pin which is low active
|
||||
* as disable signal. The output-low states, the signal
|
||||
* is inactive, e.g. not disabled
|
||||
*/
|
||||
wlan-wdisable-hog {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "WLAN_W_DISABLE#";
|
||||
};
|
||||
|
||||
/*
|
||||
* Controls the WiFi card reset pin which is low active
|
||||
* as reset signal. The output-low states, the signal
|
||||
* is inactive, e.g. not in reset
|
||||
*/
|
||||
wlan-perst-hog {
|
||||
gpio-hog;
|
||||
gpios = <6 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "WLAN_PERST#";
|
||||
};
|
||||
};
|
||||
|
||||
expander2: gpio@72 {
|
||||
compatible = "nxp,pca9538";
|
||||
reg = <0x72>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
vcc-supply = <®_3v3>;
|
||||
gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
|
||||
"LCD_BLT_EN", "LVDS_SHDN#",
|
||||
"FAN_PWR_EN", "",
|
||||
"USER_LED1", "USER_LED2";
|
||||
};
|
||||
};
|
||||
|
||||
&lpuart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpuart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
linux,rs485-enabled-at-boot-time;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcf85063 {
|
||||
/* RTC_EVENT# from SoM is connected on mainboard */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcf85063>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
|
||||
&se97_som {
|
||||
/* TEMP_EVENT# from SoM is connected on mainboard */
|
||||
interrupt-parent = <&expander0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
&tpm2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_tpm2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "otg";
|
||||
hnp-disable;
|
||||
srp-disable;
|
||||
adp-disable;
|
||||
usb-role-switch;
|
||||
disable-over-current;
|
||||
samsung,picophy-pre-emp-curr-control = <3>;
|
||||
samsung,picophy-dc-vol-level-adjust = <7>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
typec_hs: endpoint {
|
||||
remote-endpoint = <&typec_con_hs>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
dr_mode = "host";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
disable-over-current;
|
||||
samsung,picophy-pre-emp-curr-control = <3>;
|
||||
samsung,picophy-dc-vol-level-adjust = <7>;
|
||||
status = "okay";
|
||||
|
||||
hub_2_0: hub@1 {
|
||||
compatible = "usb424,2517";
|
||||
reg = <1>;
|
||||
reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
|
||||
vdd-supply = <®_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
|
||||
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
bus-width = <4>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
disable-wp;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_eqos: eqosgrp {
|
||||
fsl,pins = /* PD | FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e>,
|
||||
/* SION | HYS | ODE | FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000191e>,
|
||||
/* HYS | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000>,
|
||||
<MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000>,
|
||||
<MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000>,
|
||||
<MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000>,
|
||||
<MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000>,
|
||||
/* HYS | PD | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x1400>,
|
||||
/* PD | FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e>,
|
||||
<MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e>,
|
||||
<MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e>,
|
||||
<MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e>,
|
||||
<MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e>,
|
||||
/* PD | FSEL_3 | DSE X3 */
|
||||
<MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e>;
|
||||
};
|
||||
|
||||
pinctrl_eqos_phy: eqosphygrp {
|
||||
fsl,pins = /* HYS | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl_fec: fecgrp {
|
||||
fsl,pins = /* PD | FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e>,
|
||||
/* SION | HYS | ODE | FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000191e>,
|
||||
/* HYS | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000>,
|
||||
<MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000>,
|
||||
<MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x1000>,
|
||||
<MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x1000>,
|
||||
<MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x1000>,
|
||||
/* HYS | PD | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x1400>,
|
||||
/* PD | FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e>,
|
||||
<MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e>,
|
||||
<MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x51e>,
|
||||
<MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x51e>,
|
||||
<MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x51e>,
|
||||
/* PD | FSEL_3 | DSE X3 */
|
||||
<MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e>;
|
||||
};
|
||||
|
||||
pinctrl_fec_phy: fecphygrp {
|
||||
fsl,pins = /* HYS | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan1: flexcan1grp {
|
||||
fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
|
||||
<MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200>,
|
||||
/* PU | FSEL_3 | DSE X4 */
|
||||
<MX93_PAD_PDM_CLK__CAN1_TX 0x039e>;
|
||||
};
|
||||
|
||||
pinctrl_jtag: jtaggrp {
|
||||
fsl,pins = <MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e>,
|
||||
<MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200>,
|
||||
<MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e>,
|
||||
<MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200>;
|
||||
};
|
||||
|
||||
pinctrl_lpi2c3: lpi2c3grp {
|
||||
fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
|
||||
<MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e>,
|
||||
<MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e>;
|
||||
};
|
||||
|
||||
pinctrl_pcf85063: pcf85063grp {
|
||||
fsl,pins = <MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl_pexp_irq: pexpirqgrp {
|
||||
fsl,pins = /* HYS | FSEL_0 | No DSE */
|
||||
<MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl_rgbdisp: rgbdispgrp {
|
||||
fsl,pins = <MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e>,
|
||||
<MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e>,
|
||||
<MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e>,
|
||||
<MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e>,
|
||||
<MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x31e>,
|
||||
<MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x31e>,
|
||||
<MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x31e>,
|
||||
<MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x31e>,
|
||||
<MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x31e>,
|
||||
<MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x31e>,
|
||||
<MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x31e>,
|
||||
<MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x31e>,
|
||||
<MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x31e>,
|
||||
<MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x31e>,
|
||||
<MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e>,
|
||||
<MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e>,
|
||||
<MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e>,
|
||||
<MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e>,
|
||||
<MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e>,
|
||||
<MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e>,
|
||||
<MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e>,
|
||||
<MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e>,
|
||||
<MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x31e>,
|
||||
<MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x31e>,
|
||||
<MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x31e>,
|
||||
<MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x31e>,
|
||||
<MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x31e>,
|
||||
<MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x31e>;
|
||||
};
|
||||
|
||||
pinctrl_touch: touchgrp {
|
||||
fsl,pins = /* HYS | FSEL_0 | No DSE */
|
||||
<MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl_tpm2: tpm2grp {
|
||||
fsl,pins = <MX93_PAD_I2C2_SCL__TPM2_CH2 0x57e>;
|
||||
};
|
||||
|
||||
pinctrl_typec: typecgrp {
|
||||
fsl,pins = /* HYS | FSEL_0 | No DSE */
|
||||
<MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = /* HYS | FSEL_0 | No DSE */
|
||||
<MX93_PAD_UART1_RXD__LPUART1_RX 0x1000>,
|
||||
/* FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_UART1_TXD__LPUART1_TX 0x011e>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = /* HYS | FSEL_0 | No DSE */
|
||||
<MX93_PAD_UART2_RXD__LPUART2_RX 0x1000>,
|
||||
/* FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_UART2_TXD__LPUART2_TX 0x011e>,
|
||||
/* FSEL_2 | DSE X4 */
|
||||
<MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
|
||||
fsl,pins = /* HYS | FSEL_0 | No DSE */
|
||||
<MX93_PAD_SD2_CD_B__GPIO3_IO00 0x1000>;
|
||||
};
|
||||
|
||||
/* enable SION for data and cmd pad due to ERR052021 */
|
||||
pinctrl_usdhc2_hs: usdhc2hsgrp {
|
||||
fsl,pins = /* PD | FSEL_3 | DSE X5 */
|
||||
<MX93_PAD_SD2_CLK__USDHC2_CLK 0x05be>,
|
||||
/* HYS | PU | FSEL_3 | DSE X4 */
|
||||
<MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e>,
|
||||
/* HYS | PU | FSEL_3 | DSE X3 */
|
||||
<MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e>,
|
||||
<MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e>,
|
||||
<MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e>,
|
||||
<MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e>,
|
||||
/* FSEL_2 | DSE X3 */
|
||||
<MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e>;
|
||||
};
|
||||
|
||||
/* enable SION for data and cmd pad due to ERR052021 */
|
||||
pinctrl_usdhc2_uhs: usdhc2uhsgrp {
|
||||
fsl,pins = /* PD | FSEL_3 | DSE X6 */
|
||||
<MX93_PAD_SD2_CLK__USDHC2_CLK 0x05fe>,
|
||||
/* HYS | PU | FSEL_3 | DSE X4 */
|
||||
<MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e>,
|
||||
<MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e>,
|
||||
<MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e>,
|
||||
<MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e>,
|
||||
<MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e>,
|
||||
/* FSEL_2 | DSE X3 */
|
||||
<MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user