From b7a28d8a7b80dd5630a72d8d8cb9f2d1bde6a1ad Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Tue, 25 Jun 2024 23:16:18 +0300
Subject: [PATCH] arm64: dts: qcom: pm8916: add temp-alarm thermal zone

Define the themal zones using the temperature values in stage1 for this
platform so that the spmi-temp-alarm driver becomes active.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240625-pm8916-tz-v1-1-a4c1f61e92dd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---
 arch/arm64/boot/dts/qcom/pm8916.dtsi | 31 +++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 4b2e8fb47d2d..2def48f2d101 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -4,8 +4,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-&spmi_bus {
+/ {
+	thermal-zones {
+		pm8150-thermal {
+			polling-delay-passive = <100>;
 
+			thermal-sensors = <&pm8916_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
 	pm8916_0: pmic@0 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;