mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-05 03:45:16 +00:00
arm64: dts: ti: Refractor AM625 SK dts
To prepare for upcoming derivative boards based on the AM625 SK, refactor the dts file for this board into a common dtsi file that the derivative boards will inherit and retain only those parts that are different in the current dts file. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20230321-am62-lp-sk-v2-2-0a56e1694804@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Anand Gadiyar
Nishanth Menon
parent
3bc4f501be
commit
a841581451
@ -7,32 +7,12 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
#include "k3-am625.dtsi"
|
||||
#include "k3-am62x-sk-common.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,am625-sk", "ti,am625";
|
||||
model = "Texas Instruments AM625 SK";
|
||||
|
||||
aliases {
|
||||
serial2 = &main_uart0;
|
||||
mmc0 = &sdhci0;
|
||||
mmc1 = &sdhci1;
|
||||
mmc2 = &sdhci2;
|
||||
spi0 = &ospi0;
|
||||
ethernet0 = &cpsw_port1;
|
||||
ethernet1 = &cpsw_port2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
|
||||
};
|
||||
|
||||
opp-table {
|
||||
/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
|
||||
opp-1400000000 {
|
||||
@ -49,39 +29,6 @@ memory@80000000 {
|
||||
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
ramoops@9ca00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x00 0x9ca00000 0x00 0x00100000>;
|
||||
record-size = <0x8000>;
|
||||
console-size = <0x8000>;
|
||||
ftrace-size = <0x00>;
|
||||
pmsg-size = <0x8000>;
|
||||
};
|
||||
|
||||
secure_tfa_ddr: tfa@9e780000 {
|
||||
reg = <0x00 0x9e780000 0x00 0x80000>;
|
||||
alignment = <0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
secure_ddr: optee@9e800000 {
|
||||
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
|
||||
alignment = <0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x00 0x9db00000 0x00 0xc00000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vmain_pd: regulator-0 {
|
||||
/* TPS65988 PD CONTROLLER OUTPUT */
|
||||
compatible = "regulator-fixed";
|
||||
@ -140,108 +87,9 @@ vdd_sd_dv: regulator-4 {
|
||||
states = <1800000 0x0>,
|
||||
<3300000 0x1>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usr_led_pins_default>;
|
||||
|
||||
led-0 {
|
||||
label = "am62-sk:green:heartbeat";
|
||||
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&main_pmx0 {
|
||||
main_uart0_pins_default: main-uart0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
|
||||
AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c0_pins_default: main-i2c0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
|
||||
AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c1_pins_default: main-i2c1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
|
||||
AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c2_pins_default: main-i2c2-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
|
||||
AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mmc0_pins_default: main-mmc0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
|
||||
AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
|
||||
AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
|
||||
AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
|
||||
AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
|
||||
AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
|
||||
AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
|
||||
AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
|
||||
AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
|
||||
AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mmc1_pins_default: main-mmc1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
|
||||
AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
|
||||
AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
|
||||
AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
|
||||
AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
|
||||
AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
|
||||
AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
|
||||
>;
|
||||
};
|
||||
|
||||
usr_led_pins_default: usr-led-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mdio1_pins_default: main-mdio1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
|
||||
AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
|
||||
>;
|
||||
};
|
||||
|
||||
main_rgmii1_pins_default: main-rgmii1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
|
||||
AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
|
||||
AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
|
||||
AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
|
||||
AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
|
||||
AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
|
||||
AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
|
||||
AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
|
||||
AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
|
||||
AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
|
||||
AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
|
||||
AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
|
||||
>;
|
||||
};
|
||||
|
||||
main_rgmii2_pins_default: main-rgmii2-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
|
||||
@ -286,43 +134,9 @@ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default {
|
||||
AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_usb1_pins_default: main-usb1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_uart0 {
|
||||
/* WKUP UART0 is used by DM firmware */
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
&main_uart0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_uart0_pins_default>;
|
||||
};
|
||||
|
||||
&main_uart1 {
|
||||
/* Main UART1 is used by TIFS firmware */
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
&main_i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c0_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&main_i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c1_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
exp1: gpio@22 {
|
||||
compatible = "ti,tca6424";
|
||||
reg = <0x22>;
|
||||
@ -351,23 +165,9 @@ exp1: gpio@22 {
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mmc0_pins_default>;
|
||||
ti,driver-strength-ohm = <50>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
/* SD/MMC */
|
||||
status = "okay";
|
||||
vmmc-supply = <&vdd_mmc1>;
|
||||
vqmmc-supply = <&vdd_sd_dv>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mmc1_pins_default>;
|
||||
ti,driver-strength-ohm = <50>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&cpsw3g {
|
||||
@ -376,28 +176,12 @@ &cpsw3g {
|
||||
&main_rgmii2_pins_default>;
|
||||
};
|
||||
|
||||
&cpsw_port1 {
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&cpsw3g_phy0>;
|
||||
};
|
||||
|
||||
&cpsw_port2 {
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&cpsw3g_phy1>;
|
||||
};
|
||||
|
||||
&cpsw3g_mdio {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mdio1_pins_default>;
|
||||
|
||||
cpsw3g_phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
ti,min-output-impedance;
|
||||
};
|
||||
|
||||
cpsw3g_phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
@ -472,23 +256,3 @@ partition@3fc0000 {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbss0 {
|
||||
status = "okay";
|
||||
ti,vbus-divider;
|
||||
};
|
||||
|
||||
&usbss1 {
|
||||
status = "okay";
|
||||
ti,vbus-divider;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "host";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_usb1_pins_default>;
|
||||
};
|
||||
|
||||
275
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
Normal file
275
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
Normal file
@ -0,0 +1,275 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Common dtsi for AM62x SK and derivatives
|
||||
*
|
||||
* Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
#include "k3-am625.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial2 = &main_uart0;
|
||||
mmc0 = &sdhci0;
|
||||
mmc1 = &sdhci1;
|
||||
mmc2 = &sdhci2;
|
||||
spi0 = &ospi0;
|
||||
ethernet0 = &cpsw_port1;
|
||||
ethernet1 = &cpsw_port2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
/* 2G RAM */
|
||||
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
|
||||
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
ramoops@9ca00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x00 0x9ca00000 0x00 0x00100000>;
|
||||
record-size = <0x8000>;
|
||||
console-size = <0x8000>;
|
||||
ftrace-size = <0x00>;
|
||||
pmsg-size = <0x8000>;
|
||||
};
|
||||
|
||||
secure_tfa_ddr: tfa@9e780000 {
|
||||
reg = <0x00 0x9e780000 0x00 0x80000>;
|
||||
alignment = <0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
secure_ddr: optee@9e800000 {
|
||||
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
|
||||
alignment = <0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x00 0x9db00000 0x00 0xc00000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usr_led_pins_default>;
|
||||
|
||||
led-0 {
|
||||
label = "am62-sk:green:heartbeat";
|
||||
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&main_pmx0 {
|
||||
/* First pad number is ALW package and second is AMC package */
|
||||
main_uart0_pins_default: main-uart0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
|
||||
AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c0_pins_default: main-i2c0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */
|
||||
AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c1_pins_default: main-i2c1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
|
||||
AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c2_pins_default: main-i2c2-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */
|
||||
AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mmc0_pins_default: main-mmc0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
|
||||
AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
|
||||
AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
|
||||
AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
|
||||
AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
|
||||
AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
|
||||
AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
|
||||
AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
|
||||
AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
|
||||
AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mmc1_pins_default: main-mmc1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
|
||||
AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
|
||||
AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
|
||||
AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
|
||||
AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
|
||||
AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
|
||||
AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */
|
||||
>;
|
||||
};
|
||||
|
||||
usr_led_pins_default: usr-led-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mdio1_pins_default: main-mdio1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */
|
||||
AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */
|
||||
>;
|
||||
};
|
||||
|
||||
main_rgmii1_pins_default: main-rgmii1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
|
||||
AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
|
||||
AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */
|
||||
AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */
|
||||
AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */
|
||||
AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */
|
||||
AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */
|
||||
AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */
|
||||
AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */
|
||||
AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */
|
||||
AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */
|
||||
AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
|
||||
>;
|
||||
};
|
||||
|
||||
main_usb1_pins_default: main-usb1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_uart0 {
|
||||
/* WKUP UART0 is used by DM firmware */
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
&main_uart0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_uart0_pins_default>;
|
||||
};
|
||||
|
||||
&main_uart1 {
|
||||
/* Main UART1 is used by TIFS firmware */
|
||||
status = "reserved";
|
||||
};
|
||||
|
||||
&main_i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c0_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&main_i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c1_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mmc0_pins_default>;
|
||||
ti,driver-strength-ohm = <50>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
/* SD/MMC */
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mmc1_pins_default>;
|
||||
ti,driver-strength-ohm = <50>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&cpsw3g {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_rgmii1_pins_default>;
|
||||
};
|
||||
|
||||
&cpsw_port1 {
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&cpsw3g_phy0>;
|
||||
};
|
||||
|
||||
&cpsw3g_mdio {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_mdio1_pins_default>;
|
||||
|
||||
cpsw3g_phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
ti,min-output-impedance;
|
||||
};
|
||||
};
|
||||
|
||||
&mailbox0_cluster0 {
|
||||
mbox_m4_0: mbox-m4-0 {
|
||||
ti,mbox-rx = <0 0 0>;
|
||||
ti,mbox-tx = <1 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usbss0 {
|
||||
status = "okay";
|
||||
ti,vbus-divider;
|
||||
};
|
||||
|
||||
&usbss1 {
|
||||
status = "okay";
|
||||
ti,vbus-divider;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "host";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_usb1_pins_default>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user