Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-27 15:36:48 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

scsi: ufs: qcom : Refactor phy_power_on/off calls

Browse Source 
Commit 3f6d1767b1 ("phy: ufs-qcom: Refactor all init steps into
phy_poweron") moved the phy_power_on/off from ufs_qcom_setup_clocks
to suspend/resume func.

To have a better power saving, remove the phy_power_on/off calls from
resume/suspend path and put them back to ufs_qcom_setup_clocks, so that
PHY regulators & clks can be turned on/off along with UFS's clocks.

Since phy phy_power_on is separated out from phy calibrate, make
separate calls to phy_power_on calls from ufs qcom driver.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-11-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Nitin Rawat 2025-05-26 21:08:21 +05:30 committed by Vinod Koul
parent a079b2d715
commit 77d2fa54a9
1 changed files with 27 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
drivers/ufs/host/ufs-qcom.c
View File

@ -711,53 +711,29 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
if (status == PRE_CHANGE)
return 0;
if (ufs_qcom_is_link_off(hba)) {
/*
* Disable the tx/rx lane symbol clocks before PHY is
* powered down as the PLL source should be disabled
* after downstream clocks are disabled.
*/
if (!ufs_qcom_is_link_active(hba))
ufs_qcom_disable_lane_clks(host);
phy_power_off(phy);
/* reset the connected UFS device during power down */
/* reset the connected UFS device during power down */
if (ufs_qcom_is_link_off(hba) && host->device_reset)
ufs_qcom_device_reset_ctrl(hba, true);
} else if (!ufs_qcom_is_link_active(hba)) {
ufs_qcom_disable_lane_clks(host);
}
return ufs_qcom_ice_suspend(host);
}
static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
int err;
if (ufs_qcom_is_link_off(hba)) {
err = phy_power_on(phy);
if (err) {
dev_err(hba->dev, "%s: failed PHY power on: %d\n",
__func__, err);
return err;
}
err = ufs_qcom_enable_lane_clks(host);
if (err)
return err;
} else if (!ufs_qcom_is_link_active(hba)) {
err = ufs_qcom_enable_lane_clks(host);
if (err)
return err;
}
err = ufs_qcom_enable_lane_clks(host);
if (err)
return err;
return ufs_qcom_ice_resume(host);
}
@ -1136,12 +1112,20 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba)
* @on: If true, enable clocks else disable them.
* @status: PRE_CHANGE or POST_CHANGE notify
*
* There are certain clocks which comes from the PHY so it needs
* to be managed together along with controller clocks which also
* provides a better power saving. Hence keep phy_power_off/on calls
* in ufs_qcom_setup_clocks, so that PHY's regulators & clks can be
* turned on/off along with UFS's clocks.
*
* Return: 0 on success, non-zero on failure.
*/
static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
int err;
/*
* In case ufs_qcom_init() is not yet done, simply ignore.
@ -1160,10 +1144,22 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
/* disable device ref_clk */
ufs_qcom_dev_ref_clk_ctrl(host, false);
}
err = phy_power_off(phy);
if (err) {
dev_err(hba->dev, "phy power off failed, ret=%d\n", err);
return err;
}
}
break;
case POST_CHANGE:
if (on) {
err = phy_power_on(phy);
if (err) {
dev_err(hba->dev, "phy power on failed, ret = %d\n", err);
return err;
}
/* enable the device ref clock for HS mode*/
if (ufshcd_is_hs_mode(&hba->pwr_info))
ufs_qcom_dev_ref_clk_ctrl(host, true);