Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-08 07:16:26 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

arm64: dts: qcom: pm8150: Add base dts file

Browse Source 
Add base DTS file for pm8150 along with GPIOs, power-on, rtc and vadc
nodes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Vinod Koul 2019-08-22 00:12:33 +05:30 committed by Bjorn Andersson
parent e13c6d144f
commit 5101f22a5c
1 changed files with 97 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

97
arch/arm64/boot/dts/qcom/pm8150.dtsi Normal file
View File

@ -0,0 +1,97 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2019, Linaro Limited
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
&spmi_bus {
pm8150_0: pmic@0 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pon: power-on@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
status = "disabled";
};
};
pm8150_adc: adc@3100 {
compatible = "qcom,spmi-adc5";
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
ref-gnd@0 {
reg = <ADC5_REF_GND>;
qcom,pre-scaling = <1 1>;
label = "ref_gnd";
};
vref-1p25@1 {
reg = <ADC5_1P25VREF>;
qcom,pre-scaling = <1 1>;
label = "vref_1p25";
};
die-temp@6 {
reg = <ADC5_DIE_TEMP>;
qcom,pre-scaling = <1 1>;
label = "die_temp";
};
};
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
status = "disabled";
};
pm8150_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
<0x0 0xc1 0x0 IRQ_TYPE_NONE>,
<0x0 0xc2 0x0 IRQ_TYPE_NONE>,
<0x0 0xc3 0x0 IRQ_TYPE_NONE>,
<0x0 0xc4 0x0 IRQ_TYPE_NONE>,
<0x0 0xc5 0x0 IRQ_TYPE_NONE>,
<0x0 0xc6 0x0 IRQ_TYPE_NONE>,
<0x0 0xc7 0x0 IRQ_TYPE_NONE>,
<0x0 0xc8 0x0 IRQ_TYPE_NONE>,
<0x0 0xc9 0x0 IRQ_TYPE_NONE>,
<0x0 0xca 0x0 IRQ_TYPE_NONE>,
<0x0 0xcb 0x0 IRQ_TYPE_NONE>;
};
};
pmic@1 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
};
};