Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-03 01:28:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT

Browse Source 
The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some
DT nodes with the Zero 2, but comes with a different PMIC.

Move the common parts (except the PMIC) into a new shared file, and
include that from the existing board .dts file.

No functional change, the generated DTB is the same, except for some
phandle numbering differences.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This commit is contained in:
Andre Przywara 2023-08-04 18:08:54 +01:00 committed by Jernej Skrabec
parent d0d73ee5e9
commit 322bf10320
2 changed files with 135 additions and 118 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

134
arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi Normal file
View File

@ -0,0 +1,134 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2020 Arm Ltd.
*
* DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3.
* Excludes PMIC nodes and properties, since they are different between the two.
*/
#include "sun50i-h616.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
ethernet0 = &emac0;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
default-state = "on";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
};
};
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the USB-C socket */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&reg_vcc5v>;
enable-active-high;
gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
};
};
&ehci1 {
status = "okay";
};
/* USB 2 & 3 are on headers only. */
&emac0 {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
allwinner,rx-delay-ps = <3100>;
allwinner,tx-delay-ps = <700>;
status = "okay";
};
&mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
bus-width = <4>;
status = "okay";
};
&ohci1 {
status = "okay";
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usbotg {
/*
* PHY0 pins are connected to a USB-C socket, but a role switch
* is not implemented: both CC pins are pulled to GND.
* The VBUS pins power the device, so a fixed peripheral mode
* is the best choice.
* The board can be powered via GPIOs, in this case port0 *can*
* act as a host (with a cable/adapter ignoring CC), as VBUS is
* then provided by the GPIOs. Any user of this setup would
* need to adjust the DT accordingly: dr_mode set to "host",
* enabling OHCI0 and EHCI0.
*/
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

119
arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
View File

@ -5,95 +5,19 @@
/dts-v1/; /dts-v1/;
#include "sun50i-h616.dtsi" #include "sun50i-h616-orangepi-zero.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/leds/common.h>
/ { / {
model = "OrangePi Zero2"; model = "OrangePi Zero2";
compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
aliases {
ethernet0 = &emac0;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
default-state = "on";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
};
};
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the USB-C socket */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&reg_vcc5v>;
enable-active-high;
gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
};
}; };
&ehci1 {
status = "okay";
};
/* USB 2 & 3 are on headers only. */
&emac0 { &emac0 {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dcdce>; phy-supply = <&reg_dcdce>;
allwinner,rx-delay-ps = <3100>;
allwinner,tx-delay-ps = <700>;
status = "okay";
};
&mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
}; };
&mmc0 { &mmc0 {
vmmc-supply = <&reg_dcdce>; vmmc-supply = <&reg_dcdce>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
bus-width = <4>;
status = "okay";
};
&ohci1 {
status = "okay";
}; };
&r_rsb { &r_rsb {
@ -211,44 +135,3 @@ &pio {
vcc-ph-supply = <&reg_aldo1>; vcc-ph-supply = <&reg_aldo1>;
vcc-pi-supply = <&reg_aldo1>; vcc-pi-supply = <&reg_aldo1>;
}; };
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usbotg {
/*
* PHY0 pins are connected to a USB-C socket, but a role switch
* is not implemented: both CC pins are pulled to GND.
* The VBUS pins power the device, so a fixed peripheral mode
* is the best choice.
* The board can be powered via GPIOs, in this case port0 *can*
* act as a host (with a cable/adapter ignoring CC), as VBUS is
* then provided by the GPIOs. Any user of this setup would
* need to adjust the DT accordingly: dr_mode set to "host",
* enabling OHCI0 and EHCI0.
*/
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};